]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
bnx2x: Coalesce pr_cont uses and fix DP typos
authorJoe Perches <joe@perches.com>
Sun, 14 Aug 2011 12:16:20 +0000 (12:16 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 17 Aug 2011 22:47:23 +0000 (15:47 -0700)
Uses of pr_cont should be avoided where reasonably possible
because they can be interleaved by other threads and processes.

Coalesce pr_cont uses.

Fix typos, duplicated words and spacing in DP uses caused
by split multi-line formats.  Coalesce some of these
split formats.  Add missing terminating newlines to DP uses.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

index d724a18b5285dd13e9caffdbd14f907fd81b5d08..3254b9e7c2ea99e185c16475e78889254164b5b2 100644 (file)
@@ -953,15 +953,16 @@ void __bnx2x_link_report(struct bnx2x *bp)
                netdev_err(bp->dev, "NIC Link is Down\n");
                return;
        } else {
+               const char *duplex;
+               const char *flow;
+
                netif_carrier_on(bp->dev);
-               netdev_info(bp->dev, "NIC Link is Up, ");
-               pr_cont("%d Mbps ", cur_data.line_speed);
 
                if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
                                       &cur_data.link_report_flags))
-                       pr_cont("full duplex");
+                       duplex = "full";
                else
-                       pr_cont("half duplex");
+                       duplex = "half";
 
                /* Handle the FC at the end so that only these flags would be
                 * possibly set. This way we may easily check if there is no FC
@@ -970,16 +971,19 @@ void __bnx2x_link_report(struct bnx2x *bp)
                if (cur_data.link_report_flags) {
                        if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
                                     &cur_data.link_report_flags)) {
-                               pr_cont(", receive ");
                                if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
                                     &cur_data.link_report_flags))
-                                       pr_cont("& transmit ");
+                                       flow = "ON - receive & transmit";
+                               else
+                                       flow = "ON - receive";
                        } else {
-                               pr_cont(", transmit ");
+                               flow = "ON - transmit";
                        }
-                       pr_cont("flow control ON");
+               } else {
+                       flow = "none";
                }
-               pr_cont("\n");
+               netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
+                           cur_data.line_speed, duplex, flow);
        }
 }
 
@@ -2584,7 +2588,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
        /* enable this debug print to view the transmission queue being used
-       DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
+       DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n",
           txq_index, fp_index, txdata_index); */
 
        /* locate the fastpath and the txdata */
@@ -2593,7 +2597,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
        /* enable this debug print to view the tranmission details
        DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
-                       " tx_data ptr %p fp pointer %p",
+                       " tx_data ptr %p fp pointer %p\n",
           txdata->cid, fp_index, txdata_index, txdata, fp); */
 
        if (unlikely(bnx2x_tx_avail(bp, txdata) <
@@ -2910,14 +2914,14 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
        /* requested to support too many traffic classes */
        if (num_tc > bp->max_cos) {
                DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
-                                    " requested: %d. max supported is %d",
+                                    " requested: %d. max supported is %d\n",
                                     num_tc, bp->max_cos);
                return -EINVAL;
        }
 
        /* declare amount of supported traffic classes */
        if (netdev_set_num_tc(dev, num_tc)) {
-               DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
+               DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n",
                                     num_tc);
                return -EINVAL;
        }
@@ -2925,7 +2929,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
        /* configure priority to traffic class mapping */
        for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
                netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
-               DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
+               DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n",
                   prio, bp->prio_to_cos[prio]);
        }
 
@@ -2934,10 +2938,10 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
           This can be used for ets or pfc, and save the effort of setting
           up a multio class queue disc or negotiating DCBX with a switch
        netdev_set_prio_tc_map(dev, 0, 0);
-       DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
+       DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0);
        for (prio = 1; prio < 16; prio++) {
                netdev_set_prio_tc_map(dev, prio, 1);
-               DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
+               DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1);
        } */
 
        /* configure traffic class to transmission queue mapping */
@@ -2945,7 +2949,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
                count = BNX2X_NUM_ETH_QUEUES(bp);
                offset = cos * MAX_TXQS_PER_COS;
                netdev_set_tc_queue(dev, cos, count, offset);
-               DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
+               DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n",
                   cos, offset, count);
        }
 
@@ -3033,7 +3037,7 @@ static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
                        struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
                        DP(BNX2X_MSG_SP,
-                          "freeing tx memory of fp %d cos %d cid %d",
+                          "freeing tx memory of fp %d cos %d cid %d\n",
                           fp_index, cos, txdata->cid);
 
                        BNX2X_FREE(txdata->tx_buf_ring);
@@ -3115,7 +3119,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
                        struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
                        DP(BNX2X_MSG_SP, "allocating tx memory of "
-                                        "fp %d cos %d",
+                                        "fp %d cos %d\n",
                           index, cos);
 
                        BNX2X_ALLOC(txdata->tx_buf_ring,
index 223bfeebc59798bd76fd2861bd8e87fc003a41b3..501a24b4767e482f54e273f391fba6c6fbeacd8a 100644 (file)
@@ -1289,7 +1289,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
        txdata->txq_index = txq_index;
        txdata->tx_cons_sb = tx_cons_sb;
 
-       DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d",
+       DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d\n",
           txdata->cid, txdata->txq_index);
 }
 
@@ -1333,7 +1333,7 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
        bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]),
                          fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX);
 
-       DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index);
+       DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)\n", fp->index);
 
        /* qZone id equals to FW (per path) client id */
        bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
index a4ea35f6a4568cb1dd018a93ab8097f4d2f2ecec..38b5ca527a32e712d6f4ba7b44a7b2e1df782806 100644 (file)
@@ -350,7 +350,7 @@ static void bnx2x_dcbx_map_nw(struct bnx2x *bp)
                if (cos_params[i].pri_bitmask & nw_prio) {
                        /* extend the bitmask with unmapped */
                        DP(NETIF_MSG_LINK,
-                          "cos %d extended with 0x%08x", i, unmapped);
+                          "cos %d extended with 0x%08x\n", i, unmapped);
                        cos_params[i].pri_bitmask |= unmapped;
                        break;
                }
index d45b1555a6022a39d10270ed53393755b382af3a..e3de6fedf218e52d3607982f0b32c1ce02da33cc 100644 (file)
@@ -694,8 +694,8 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params,
        struct bnx2x *bp = params->bp;
 
        if (!CHIP_IS_E3B0(bp)) {
-               DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
-                                  "\n");
+               DP(NETIF_MSG_LINK,
+                  "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
                return -EINVAL;
        }
 
@@ -854,8 +854,8 @@ static int bnx2x_ets_e3b0_get_total_bw(
                if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
 
                        if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
-                               DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
-                                                  "was set to 0\n");
+                               DP(NETIF_MSG_LINK,
+                                  "bnx2x_ets_E3B0_config BW was set to 0\n");
                        return -EINVAL;
                }
                *total_bw +=
@@ -866,12 +866,12 @@ static int bnx2x_ets_e3b0_get_total_bw(
        /*Check taotl BW is valid */
        if ((100 != *total_bw) || (0 == *total_bw)) {
                if (0 == *total_bw) {
-                       DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
-                                          "shouldn't be 0\n");
+                       DP(NETIF_MSG_LINK,
+                          "bnx2x_ets_E3B0_config toatl BW shouldn't be 0\n");
                        return -EINVAL;
                }
-               DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be"
-                                  "100\n");
+               DP(NETIF_MSG_LINK,
+                  "bnx2x_ets_E3B0_config toatl BW should be 100\n");
                /**
                *   We can handle a case whre the BW isn't 100 this can happen
                *   if the TC are joined.
@@ -908,13 +908,13 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
 
        if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) {
                DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
-                                  "parameter There can't be two COS's with"
+                                  "parameter There can't be two COS's with "
                                   "the same strict pri\n");
                return -EINVAL;
        }
 
        if (pri > max_num_of_cos) {
-               DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid"
+               DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
                               "parameter Illegal strict priority\n");
            return -EINVAL;
        }
@@ -1090,8 +1090,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
        u8 cos_entry = 0;
 
        if (!CHIP_IS_E3B0(bp)) {
-               DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
-                                  "\n");
+               DP(NETIF_MSG_LINK,
+                  "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
                return -EINVAL;
        }
 
@@ -1108,8 +1108,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
        bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params,
                                                   &total_bw);
        if (0 != bnx2x_status) {
-               DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed "
-                                  "\n");
+               DP(NETIF_MSG_LINK,
+                  "bnx2x_ets_E3B0_config get_total_bw failed\n");
                return -EINVAL;
        }
 
@@ -1144,13 +1144,13 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
                                cos_entry);
 
                } else {
-                       DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not"
-                                          " valid\n");
+                       DP(NETIF_MSG_LINK,
+                          "bnx2x_ets_e3b0_config cos state not valid\n");
                        return -EINVAL;
                }
                if (0 != bnx2x_status) {
-                       DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw "
-                                          "failed\n");
+                       DP(NETIF_MSG_LINK,
+                          "bnx2x_ets_e3b0_config set cos bw failed\n");
                        return bnx2x_status;
                }
        }
@@ -1160,8 +1160,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
                                                         sp_pri_to_cos);
 
        if (0 != bnx2x_status) {
-               DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg "
-                                  "failed\n");
+               DP(NETIF_MSG_LINK,
+                  "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n");
                return bnx2x_status;
        }
 
@@ -1618,8 +1618,8 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
 
        if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
             MISC_REGISTERS_RESET_REG_2_XMAC)) {
-               DP(NETIF_MSG_LINK, "XMAC already out of reset"
-                                  " in 4-port mode\n");
+               DP(NETIF_MSG_LINK,
+                  "XMAC already out of reset in 4-port mode\n");
                return;
        }
 
@@ -1642,13 +1642,13 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
                /*  Set the number of ports on the system side to 1 */
                REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
                if (max_speed == SPEED_10000) {
-                       DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1"
-                                          " port per path\n");
+                       DP(NETIF_MSG_LINK,
+                          "Init XMAC to 10G x 1 port per path\n");
                        /* Set the number of ports on the Warp Core to 10G */
                        REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
                } else {
-                       DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports"
-                                          " per path\n");
+                       DP(NETIF_MSG_LINK,
+                          "Init XMAC to 20G x 2 ports per path\n");
                        /* Set the number of ports on the Warp Core to 20G */
                        REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1);
                }
@@ -3959,8 +3959,8 @@ static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy,
                        val16 |= 0x0040;
                        break;
                default:
-                       DP(NETIF_MSG_LINK, "Speed not supported: 0x%x"
-                                          "\n", phy->req_line_speed);
+                       DP(NETIF_MSG_LINK,
+                          "Speed not supported: 0x%x\n", phy->req_line_speed);
                        return;
                }
 
@@ -4092,9 +4092,9 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp,
                 */
                if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
                    (cfg_pin > PIN_CFG_GPIO3_P1)) {
-                       DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for "
-                                          "module detect indication\n",
-                                      cfg_pin);
+                       DP(NETIF_MSG_LINK,
+                          "ERROR: Invalid cfg pin %x for module detect indication\n",
+                          cfg_pin);
                        return -EINVAL;
                }
 
@@ -4222,8 +4222,9 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
                        break;
 
                default:
-                       DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface "
-                                          "0x%x\n", serdes_net_if);
+                       DP(NETIF_MSG_LINK,
+                          "Unsupported Serdes Net Interface 0x%x\n",
+                          serdes_net_if);
                        return;
                }
        }
@@ -6127,8 +6128,8 @@ static int bnx2x_link_initialize(struct link_params *params,
                        if (phy_index == EXT_PHY2 &&
                            (bnx2x_phy_selection(params) ==
                             PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
-                               DP(NETIF_MSG_LINK, "Not initializing"
-                                               " second phy\n");
+                               DP(NETIF_MSG_LINK,
+                                  "Not initializing second phy\n");
                                continue;
                        }
                        params->phy[phy_index].config_init(
@@ -6447,8 +6448,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
                 */
                if (active_external_phy == EXT_PHY1) {
                        if (params->phy[EXT_PHY2].phy_specific_func) {
-                               DP(NETIF_MSG_LINK, "Disabling TX on"
-                                                  " EXT_PHY2\n");
+                               DP(NETIF_MSG_LINK,
+                                  "Disabling TX on EXT_PHY2\n");
                                params->phy[EXT_PHY2].phy_specific_func(
                                        &params->phy[EXT_PHY2],
                                        params, DISABLE_TX);
@@ -7341,8 +7342,8 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
        u16 val = 0;
        u16 i;
        if (byte_cnt > 16) {
-               DP(NETIF_MSG_LINK, "Reading from eeprom is"
-                           " is limited to 0xf\n");
+               DP(NETIF_MSG_LINK,
+                  "Reading from eeprom is limited to 0xf\n");
                return -EINVAL;
        }
        /* Set the read command byte count */
@@ -7413,8 +7414,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
                                        " addr %d, cnt %d\n",
                                        addr, byte_cnt);*/
        if (byte_cnt > 16) {
-               DP(NETIF_MSG_LINK, "Reading from eeprom is"
-                           " is limited to 16 bytes\n");
+               DP(NETIF_MSG_LINK,
+                  "Reading from eeprom is limited to 16 bytes\n");
                return -EINVAL;
        }
 
@@ -7443,8 +7444,8 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
        u16 val, i;
 
        if (byte_cnt > 16) {
-               DP(NETIF_MSG_LINK, "Reading from eeprom is"
-                           " is limited to 0xf\n");
+               DP(NETIF_MSG_LINK,
+                  "Reading from eeprom is limited to 0xf\n");
                return -EINVAL;
        }
 
@@ -7591,13 +7592,14 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
                        check_limiting_mode = 1;
                } else if (copper_module_type &
                        SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
-                               DP(NETIF_MSG_LINK, "Passive Copper"
-                                           " cable detected\n");
+                               DP(NETIF_MSG_LINK,
+                                  "Passive Copper cable detected\n");
                                *edc_mode =
                                      EDC_MODE_PASSIVE_DAC;
                } else {
-                       DP(NETIF_MSG_LINK, "Unknown copper-cable-"
-                                    "type 0x%x !!!\n", copper_module_type);
+                       DP(NETIF_MSG_LINK,
+                          "Unknown copper-cable-type 0x%x !!!\n",
+                          copper_module_type);
                        return -EINVAL;
                }
                break;
@@ -7635,8 +7637,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
                                                 SFP_EEPROM_OPTIONS_ADDR,
                                                 SFP_EEPROM_OPTIONS_SIZE,
                                                 options) != 0) {
-                       DP(NETIF_MSG_LINK, "Failed to read Option"
-                               " field from module EEPROM\n");
+                       DP(NETIF_MSG_LINK,
+                          "Failed to read Option field from module EEPROM\n");
                        return -EINVAL;
                }
                if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
@@ -7677,15 +7679,15 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
                   FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
                /* Use first phy request only in case of non-dual media*/
                if (DUAL_MEDIA(params)) {
-                       DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
-                          "verification\n");
+                       DP(NETIF_MSG_LINK,
+                          "FW does not support OPT MDL verification\n");
                        return -EINVAL;
                }
                cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
        } else {
                /* No support in OPT MDL detection */
-               DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
-                         "verification\n");
+               DP(NETIF_MSG_LINK,
+                  "FW does not support OPT MDL verification\n");
                return -EINVAL;
        }
 
@@ -7736,8 +7738,9 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
        for (timeout = 0; timeout < 60; timeout++) {
                if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
                    == 0) {
-                       DP(NETIF_MSG_LINK, "SFP+ module initialization "
-                                    "took %d ms\n", timeout * 5);
+                       DP(NETIF_MSG_LINK,
+                          "SFP+ module initialization took %d ms\n",
+                          timeout * 5);
                        return 0;
                }
                msleep(5);
@@ -8506,8 +8509,8 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
        /* Set TX PreEmphasis if needed */
        if ((params->feature_config_flags &
             FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
-               DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
-                        "TX_CTRL2 0x%x\n",
+               DP(NETIF_MSG_LINK,
+                  "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n",
                         phy->tx_preemphasis[0],
                         phy->tx_preemphasis[1]);
                bnx2x_cl45_write(bp, phy,
@@ -8788,8 +8791,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
        if (mod_abs & (1<<8)) {
 
                /* Module is absent */
-               DP(NETIF_MSG_LINK, "MOD_ABS indication "
-                           "show module is absent\n");
+               DP(NETIF_MSG_LINK,
+                  "MOD_ABS indication show module is absent\n");
                phy->media_type = ETH_PHY_NOT_PRESENT;
                /*
                 * 1. Set mod_abs to detect next module
@@ -8816,8 +8819,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
 
        } else {
                /* Module is present */
-               DP(NETIF_MSG_LINK, "MOD_ABS indication "
-                           "show module is present\n");
+               DP(NETIF_MSG_LINK,
+                  "MOD_ABS indication show module is present\n");
                /*
                 * First disable transmitter, and if the module is ok, the
                 * module_detection will enable it
@@ -8908,8 +8911,9 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
                if ((val1 & (1<<8)) == 0) {
                        if (!CHIP_IS_E1x(bp))
                                oc_port = BP_PATH(bp) + (params->port << 1);
-                       DP(NETIF_MSG_LINK, "8727 Power fault has been detected"
-                                      " on port %d\n", oc_port);
+                       DP(NETIF_MSG_LINK,
+                          "8727 Power fault has been detected on port %d\n",
+                          oc_port);
                        netdev_err(bp->dev, "Error:  Power fault on Port %d has"
                                            " been detected and the power to "
                                            "that SFP+ module has been removed"
@@ -9690,8 +9694,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
                                MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
                                &legacy_status);
 
-               DP(NETIF_MSG_LINK, "Legacy speed status"
-                            " = 0x%x\n", legacy_status);
+               DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n",
+                  legacy_status);
                link_up = ((legacy_status & (1<<11)) == (1<<11));
                if (link_up) {
                        legacy_speed = (legacy_status & (3<<9));
@@ -9709,9 +9713,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
                        else
                                vars->duplex = DUPLEX_HALF;
 
-                       DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
-                                  " is_duplex_full= %d\n", vars->line_speed,
-                                  (vars->duplex == DUPLEX_FULL));
+                       DP(NETIF_MSG_LINK,
+                          "Link is up in %dMbps, is_duplex_full= %d\n",
+                          vars->line_speed,
+                          (vars->duplex == DUPLEX_FULL));
                        /* Check legacy speed AN resolution */
                        bnx2x_cl45_read(bp, phy,
                                        MDIO_AN_DEVAD,
@@ -10286,9 +10291,10 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy,
                } else /* Should not happen */
                        vars->line_speed = 0;
 
-               DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
-                          " is_duplex_full= %d\n", vars->line_speed,
-                          (vars->duplex == DUPLEX_FULL));
+               DP(NETIF_MSG_LINK,
+                  "Link is up in %dMbps, is_duplex_full= %d\n",
+                  vars->line_speed,
+                  (vars->duplex == DUPLEX_FULL));
 
                /* Check legacy speed AN resolution */
                bnx2x_cl22_read(bp, phy,
@@ -11336,8 +11342,9 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
                                                      dev_info.
                        port_hw_config[params->port].speed_capability_mask));
        }
-       DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask"
-                      " 0x%x\n", phy_index, link_config, phy->speed_cap_mask);
+       DP(NETIF_MSG_LINK,
+          "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n",
+          phy_index, link_config, phy->speed_cap_mask);
 
        phy->req_duplex = DUPLEX_FULL;
        switch (link_config  & PORT_FEATURE_LINK_SPEED_MASK) {
index 173b258b855f4759edc357acb6deb25e5534df80..e899e87f722d73e2b7e0fae77d3f3fe333d7090a 100644 (file)
@@ -4388,7 +4388,7 @@ static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
 static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
        struct bnx2x *bp, u32 cid)
 {
-       DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid);
+       DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
 #ifdef BCM_CNIC
        if (cid == BNX2X_FCOE_ETH_CID)
                return &bnx2x_fcoe(bp, q_obj);
@@ -7176,7 +7176,7 @@ static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
        /* set maximum number of COSs supported by this queue */
        init_params->max_cos = fp->max_cos;
 
-       DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d",
+       DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n",
            fp->index, init_params->max_cos);
 
        /* set the context pointers queue object */
@@ -7209,7 +7209,7 @@ int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
        DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
                         "cos %d, primary cid %d, cid %d, "
-                        "client id %d, sp-client id %d, flags %lx",
+                        "client id %d, sp-client id %d, flags %lx\n",
           tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
           q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
           tx_only_params->gen_params.spcl_id, tx_only_params->flags);
@@ -7241,7 +7241,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
        int rc;
        u8 tx_index;
 
-       DP(BNX2X_MSG_SP, "setting up queue %d", fp->index);
+       DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index);
 
        /* reset IGU state skip FCoE L2 queue */
        if (!IS_FCOE_FP(fp))
@@ -7265,7 +7265,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                return rc;
        }
 
-       DP(BNX2X_MSG_SP, "init complete");
+       DP(BNX2X_MSG_SP, "init complete\n");
 
 
        /* Now move the Queue to the SETUP state... */
@@ -7319,7 +7319,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
        struct bnx2x_queue_state_params q_params = {0};
        int rc, tx_index;
 
-       DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid);
+       DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid);
 
        q_params.q_obj = &fp->q_obj;
        /* We want to wait for completion in this context */
@@ -7334,7 +7334,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
                /* ascertain this is a normal queue*/
                txdata = &fp->txdata[tx_index];
 
-               DP(BNX2X_MSG_SP, "stopping tx-only queue %d",
+               DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n",
                                                        txdata->txq_index);
 
                /* send halt terminate on tx-only connection */
@@ -10704,7 +10704,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
                return rc;
        }
 
-       DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs);
+       DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs);
 
        rc = bnx2x_init_bp(bp);
        if (rc)
@@ -10759,15 +10759,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
        bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
 
-       netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
-              " IRQ %d, ", board_info[ent->driver_data].name,
-              (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
-              pcie_width,
-              ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
-                (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
-                                               "5GHz (Gen2)" : "2.5GHz",
-              dev->base_addr, bp->pdev->irq);
-       pr_cont("node addr %pM\n", dev->dev_addr);
+       netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+                   board_info[ent->driver_data].name,
+                   (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+                   pcie_width,
+                   ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
+                    (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
+                   "5GHz (Gen2)" : "2.5GHz",
+                   dev->base_addr, bp->pdev->irq, dev->dev_addr);
 
        return 0;
 
index b4d9c16ff152c951afcc9fa55e4d0eaa8da803d6..1f88c1913bb6570bdd14c6bc134da1c3fa7fad4a 100644 (file)
@@ -3045,8 +3045,8 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp,
                        break;
 
                case BNX2X_MCAST_CMD_DEL:
-                       DP(BNX2X_MSG_SP, "Invalidating multicast "
-                                        "MACs configuration\n");
+                       DP(BNX2X_MSG_SP,
+                          "Invalidating multicast MACs configuration\n");
 
                        /* clear the registry */
                        memset(o->registry.aprox_match.vec, 0,
@@ -4239,7 +4239,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
                         o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state);
 
        if (o->next_tx_only)  /* print num tx-only if any exist */
-               DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d",
+               DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n",
                           o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only);
 
        o->state = o->next_state;
@@ -4301,7 +4301,7 @@ static void bnx2x_q_fill_init_general_data(struct bnx2x *bp,
                test_bit(BNX2X_Q_FLG_FCOE, flags) ?
                LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
 
-       DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d",
+       DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n",
           gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg);
 }
 
@@ -4454,7 +4454,7 @@ static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp,
                                  &data->tx,
                                  &cmd_params->params.tx_only.flags);
 
-       DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x",cmd_params->q_obj->cids[0],
+       DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x\n",cmd_params->q_obj->cids[0],
           data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi);
 }
 
@@ -4501,9 +4501,9 @@ static inline int bnx2x_q_init(struct bnx2x *bp,
 
        /* Set CDU context validation values */
        for (cos = 0; cos < o->max_cos; cos++) {
-               DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d",
+               DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n",
                                 o->cids[cos], cos);
-               DP(BNX2X_MSG_SP, "context pointer %p", init->cxts[cos]);
+               DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]);
                bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]);
        }
 
@@ -4592,7 +4592,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
                return -EINVAL;
        }
 
-       DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d",
+       DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n",
                         tx_only_params->gen_params.cos,
                         tx_only_params->gen_params.spcl_id);
 
@@ -4603,7 +4603,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
        bnx2x_q_fill_setup_tx_only(bp, params, rdata);
 
        DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d,"
-                        "sp-client id %d, cos %d",
+                        "sp-client id %d, cos %d\n",
                         o->cids[cid_index],
                         rdata->general.client_id,
                         rdata->general.sp_client_id, rdata->general.cos);
@@ -5160,8 +5160,9 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp,
                return -EINVAL;
        }
 
-       DP(BNX2X_MSG_SP, "Completing command %d for func %d, setting state to "
-                        "%d\n", cmd, BP_FUNC(bp), o->next_state);
+       DP(BNX2X_MSG_SP,
+          "Completing command %d for func %d, setting state to %d\n",
+          cmd, BP_FUNC(bp), o->next_state);
 
        o->state = o->next_state;
        o->next_state = BNX2X_F_STATE_MAX;