powerpc/85xx: mpc8548cds - Add FPGA node to dts

Remove FPGA(CADMUS) macros in code. Move it to dts.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 8d4df8e7b696dc075865493e839374c66116e87f..0683983f1d3bf0b955e61e6111fb81d9e8fb56f6 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -35,7 +35,8 @@
        lbc: localbus@e0005000 {
                reg = <0 0xe0005000 0 0x1000>;
 
-               ranges = <0x0 0x0 0x0 0xff000000 0x01000000>;
+               ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+                         0x1 0x0 0x0 0xf8004000 0x00001000>;
 
                nor@0,0 {
                        #address-cells = <1>;
@@ -72,6 +73,11 @@
                                read-only;
                        };
                };
+
+               board-control@1,0 {
+                       compatible = "fsl,mpc8548cds-fpga";
+                       reg = <0x1 0x0 0x1000>;
+               };
        };
 
        soc: soc8548@e0000000 {

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 766b2150e480999b360b8883aea1c1e4dee4f8d2..ab5f0bf19454ca04526517443615b2476812e38f 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -48,17 +48,24 @@
 
 #include "mpc85xx.h"
 
-/* CADMUS info */
-/* xxx - galak, move into device tree */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER (0)
-#define CM_CSR (1)
-#define CM_RST (2)
-
+/*
+ * The CDS board contains an FPGA/CPLD called "Cadmus", which collects
+ * various logic and performs system control functions.
+ * Here is the FPGA/CPLD register map.
+ */
+struct cadmus_reg {
+       u8 cm_ver;              /* Board version */
+       u8 cm_csr;              /* General control/status */
+       u8 cm_rst;              /* Reset control */
+       u8 cm_hsclk;    /* High speed clock */
+       u8 cm_hsxclk;   /* High speed clock extended */
+       u8 cm_led;              /* LED data */
+       u8 cm_pci;              /* PCI control/status */
+       u8 cm_dma;              /* DMA control */
+       u8 res[248];    /* Total 256 bytes */
+};
 
-static int cds_pci_slot = 2;
-static volatile u8 *cadmus;
+static struct cadmus_reg *cadmus;
 
 #ifdef CONFIG_PCI
 
@@ -275,20 +282,30 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
  */
 static void __init mpc85xx_cds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
        struct device_node *np;
-#endif
+       int cds_pci_slot;
 
        if (ppc_md.progress)
                ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
 
-       cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
-       cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+       np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga");
+       if (!np) {
+               pr_err("Could not find FPGA node.\n");
+               return;
+       }
+
+       cadmus = of_iomap(np, 0);
+       of_node_put(np);
+       if (!cadmus) {
+               pr_err("Fail to map FPGA area.\n");
+               return;
+       }
 
        if (ppc_md.progress) {
                char buf[40];
+               cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1;
                snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
-                               cadmus[CM_VER], cds_pci_slot);
+                               in_8(&cadmus->cm_ver), cds_pci_slot);
                ppc_md.progress(buf, 0);
        }
 
@@ -318,7 +335,8 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
        svid = mfspr(SPRN_SVR);
 
        seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-       seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
+       seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n",
+                       in_8(&cadmus->cm_ver));
        seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
        seq_printf(m, "SVR\t\t: 0x%x\n", svid);