arm64: dts: s32g2: add serial/uart support

Add serial/uart support for NXP S32G2 based on the information provided by
NXP's CodeAurora BSP.

Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Chester Lin <clin@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 53b18671deece40c76aa61325a3878d06ffab46e..59ea8a25aa4c16d05d62d0cf4492915e0df4f4f1 100644 (file)
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,6 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2017-2021 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -84,6 +85,30 @@
                #size-cells = <1>;
                ranges = <0 0 0 0x80000000>;
 
+               uart0: serial@401c8000 {
+                       compatible = "nxp,s32g2-linflexuart",
+                                    "fsl,s32v234-linflexuart";
+                       reg = <0x401c8000 0x3000>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+                       status = "disabled";
+               };
+
+               uart1: serial@401cc000 {
+                       compatible = "nxp,s32g2-linflexuart",
+                                    "fsl,s32v234-linflexuart";
+                       reg = <0x401cc000 0x3000>;
+                       interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+                       status = "disabled";
+               };
+
+               uart2: serial@402bc000 {
+                       compatible = "nxp,s32g2-linflexuart",
+                                    "fsl,s32v234-linflexuart";
+                       reg = <0x402bc000 0x3000>;
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+                       status = "disabled";
+               };
+
                gic: interrupt-controller@50800000 {
                        compatible = "arm,gic-v3";
                        reg = <0x50800000 0x10000>,