wifi: rtw89: 8851be: add 8851BE PCI entry and fill PCI capabilities

Add PCI entry to 8851BE with its device ID 10ec:b851, also fill PCI info
according to its capabilities.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421024551.29994-3-pkshih@realtek.com

diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851be.c b/drivers/net/wireless/realtek/rtw89/rtw8851be.c
new file mode 100644 (file)
index 0000000..0f7711c
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851be.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2022-2023  Realtek Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "pci.h"
+#include "reg.h"
+#include "rtw8851b.h"
+
+static const struct rtw89_pci_info rtw8851b_pci_info = {
+       .txbd_trunc_mode        = MAC_AX_BD_TRUNC,
+       .rxbd_trunc_mode        = MAC_AX_BD_TRUNC,
+       .rxbd_mode              = MAC_AX_RXBD_PKT,
+       .tag_mode               = MAC_AX_TAG_MULTI,
+       .tx_burst               = MAC_AX_TX_BURST_2048B,
+       .rx_burst               = MAC_AX_RX_BURST_128B,
+       .wd_dma_idle_intvl      = MAC_AX_WD_DMA_INTVL_256NS,
+       .wd_dma_act_intvl       = MAC_AX_WD_DMA_INTVL_256NS,
+       .multi_tag_num          = MAC_AX_TAG_NUM_8,
+       .lbc_en                 = MAC_AX_PCIE_ENABLE,
+       .lbc_tmr                = MAC_AX_LBC_TMR_2MS,
+       .autok_en               = MAC_AX_PCIE_DISABLE,
+       .io_rcy_en              = MAC_AX_PCIE_DISABLE,
+       .io_rcy_tmr             = MAC_AX_IO_RCY_ANA_TMR_6MS,
+
+       .init_cfg_reg           = R_AX_PCIE_INIT_CFG1,
+       .txhci_en_bit           = B_AX_TXHCI_EN,
+       .rxhci_en_bit           = B_AX_RXHCI_EN,
+       .rxbd_mode_bit          = B_AX_RXBD_MODE,
+       .exp_ctrl_reg           = R_AX_PCIE_EXP_CTRL,
+       .max_tag_num_mask       = B_AX_MAX_TAG_NUM,
+       .rxbd_rwptr_clr_reg     = R_AX_RXBD_RWPTR_CLR,
+       .txbd_rwptr_clr2_reg    = 0,
+       .dma_stop1              = {R_AX_PCIE_DMA_STOP1, B_AX_TX_STOP1_MASK_V1},
+       .dma_stop2              = {0},
+       .dma_busy1              = {R_AX_PCIE_DMA_BUSY1, DMA_BUSY1_CHECK_V1},
+       .dma_busy2_reg          = 0,
+       .dma_busy3_reg          = R_AX_PCIE_DMA_BUSY1,
+
+       .rpwm_addr              = R_AX_PCIE_HRPWM,
+       .cpwm_addr              = R_AX_CPWM,
+       .tx_dma_ch_mask         = BIT(RTW89_TXCH_ACH4) | BIT(RTW89_TXCH_ACH5) |
+                                 BIT(RTW89_TXCH_ACH6) | BIT(RTW89_TXCH_ACH7) |
+                                 BIT(RTW89_TXCH_CH10) | BIT(RTW89_TXCH_CH11),
+       .bd_idx_addr_low_power  = NULL,
+       .dma_addr_set           = &rtw89_pci_ch_dma_addr_set,
+       .bd_ram_table           = &rtw89_bd_ram_table_single,
+
+       .ltr_set                = rtw89_pci_ltr_set,
+       .fill_txaddr_info       = rtw89_pci_fill_txaddr_info,
+       .config_intr_mask       = rtw89_pci_config_intr_mask,
+       .enable_intr            = rtw89_pci_enable_intr,
+       .disable_intr           = rtw89_pci_disable_intr,
+       .recognize_intrs        = rtw89_pci_recognize_intrs,
+};
+
+static const struct rtw89_driver_info rtw89_8851be_info = {
+       .chip = &rtw8851b_chip_info,
+       .bus = {
+               .pci = &rtw8851b_pci_info,
+       },
+};
+
+static const struct pci_device_id rtw89_8851be_id_table[] = {
+       {
+               PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb851),
+               .driver_data = (kernel_ulong_t)&rtw89_8851be_info,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(pci, rtw89_8851be_id_table);
+
+static struct pci_driver rtw89_8851be_driver = {
+       .name           = "rtw89_8851be",
+       .id_table       = rtw89_8851be_id_table,
+       .probe          = rtw89_pci_probe,
+       .remove         = rtw89_pci_remove,
+       .driver.pm      = &rtw89_pm_ops,
+};
+module_pci_driver(rtw89_8851be_driver);
+
+MODULE_AUTHOR("Realtek Corporation");
+MODULE_DESCRIPTION("Realtek 802.11ax wireless 8851BE driver");
+MODULE_LICENSE("Dual BSD/GPL");