}
card->dev = &pdev->dev;
- ret = snd_soc_register_card(card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
return ret;
}
-static int mt8173_max98090_dev_remove(struct platform_device *pdev)
-{
- struct snd_soc_card *card = platform_get_drvdata(pdev);
-
- snd_soc_unregister_card(card);
- return 0;
-}
-
static const struct of_device_id mt8173_max98090_dt_match[] = {
{ .compatible = "mediatek,mt8173-max98090", },
{ }
#endif
},
.probe = mt8173_max98090_dev_probe,
- .remove = mt8173_max98090_dev_remove,
};
module_platform_driver(mt8173_max98090_driver);
card->dev = &pdev->dev;
platform_set_drvdata(pdev, card);
- ret = snd_soc_register_card(card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
return ret;
}
-static int mt8173_rt5650_rt5676_dev_remove(struct platform_device *pdev)
-{
- struct snd_soc_card *card = platform_get_drvdata(pdev);
-
- snd_soc_unregister_card(card);
- return 0;
-}
-
static const struct of_device_id mt8173_rt5650_rt5676_dt_match[] = {
{ .compatible = "mediatek,mt8173-rt5650-rt5676", },
{ }
#endif
},
.probe = mt8173_rt5650_rt5676_dev_probe,
- .remove = mt8173_rt5650_rt5676_dev_remove,
};
module_platform_driver(mt8173_rt5650_rt5676_driver);
#define DPCM_MAX_BE_USERS 8
+/*
+ * snd_soc_dai_stream_valid() - check if a DAI supports the given stream
+ *
+ * Returns true if the DAI supports the indicated stream type.
+ */
+static bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream)
+{
+ struct snd_soc_pcm_stream *codec_stream;
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ codec_stream = &dai->driver->playback;
+ else
+ codec_stream = &dai->driver->capture;
+
+ /* If the codec specifies any rate at all, it supports the stream. */
+ return codec_stream->rates;
+}
+
/**
* snd_soc_runtime_activate() - Increment active count for PCM runtime components
* @rtd: ASoC PCM runtime that is activated
/* first calculate min/max only for CODECs in the DAI link */
for (i = 0; i < rtd->num_codecs; i++) {
+
+ /*
+ * Skip CODECs which don't support the current stream type.
+ * Otherwise, since the rate, channel, and format values will
+ * zero in that case, we would have no usable settings left,
+ * causing the resulting setup to fail.
+ * At least one CODEC should match, otherwise we should have
+ * bailed out on a higher level, since there would be no
+ * CODEC to support the transfer direction in that case.
+ */
+ if (!snd_soc_dai_stream_valid(rtd->codec_dais[i],
+ substream->stream))
+ continue;
+
codec_dai_drv = rtd->codec_dais[i]->driver;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
codec_stream = &codec_dai_drv->playback;
struct snd_soc_dai *codec_dai = rtd->codec_dais[i];
struct snd_pcm_hw_params codec_params;
+ /*
+ * Skip CODECs which don't support the current stream type,
+ * the idea being that if a CODEC is not used for the currently
+ * set up transfer direction, it should not need to be
+ * configured, especially since the configuration used might
+ * not even be supported by that CODEC. There may be cases
+ * however where a CODEC needs to be set up although it is
+ * actually not being used for the transfer, e.g. if a
+ * capture-only CODEC is acting as an LRCLK and/or BCLK master
+ * for the DAI link including a playback-only CODEC.
+ * If this becomes necessary, we will have to augment the
+ * machine driver setup with information on how to act, so
+ * we can do the right thing here.
+ */
+ if (!snd_soc_dai_stream_valid(codec_dai, substream->stream))
+ continue;
+
/* copy params for each codec */
codec_params = *params;