#include "tuner-i2c.h"
#include "tuner-simple.h"
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
#define PREFIX "tuner-simple"
-static int offset = 0;
+static int offset;
module_param(offset, int, 0664);
-MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner");
+MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner");
/* ---------------------------------------------------------------------- */
*/
#define TEMIC_SET_PAL_I 0x05
#define TEMIC_SET_PAL_DK 0x09
-#define TEMIC_SET_PAL_L 0x0a // SECAM ?
-#define TEMIC_SET_PAL_L2 0x0b // change IF !
+#define TEMIC_SET_PAL_L 0x0a /* SECAM ? */
+#define TEMIC_SET_PAL_L2 0x0b /* change IF ! */
#define TEMIC_SET_PAL_BG 0x0c
/* tv tuner system standard selection for Philips FQ1216ME
struct tuner_simple_priv *priv = fe->tuner_priv;
unsigned char byte;
- if (1 != tuner_i2c_xfer_recv(&priv->i2c_props,&byte,1))
+ if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1))
return 0;
return byte;
static inline int tuner_stereo(const int type, const int status)
{
switch (type) {
- case TUNER_PHILIPS_FM1216ME_MK3:
- case TUNER_PHILIPS_FM1236_MK3:
- case TUNER_PHILIPS_FM1256_IH3:
- case TUNER_LG_NTSC_TAPE:
- return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
- default:
- return status & TUNER_STEREO;
+ case TUNER_PHILIPS_FM1216ME_MK3:
+ case TUNER_PHILIPS_FM1236_MK3:
+ case TUNER_PHILIPS_FM1256_IH3:
+ case TUNER_LG_NTSC_TAPE:
+ return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
+ default:
+ return status & TUNER_STEREO;
}
}
continue;
break;
}
- /* use default tuner_t_params if desired_type not available */
+ /* use default tuner params if desired_type not available */
if (desired_type != tun->params[j].type) {
- tuner_dbg("IFPCoff = %d: tuner_t_params undefined for tuner %d\n",
+ tuner_dbg("IFPCoff = %d: params undefined for tuner %d\n",
IFPCoff, priv->type);
j = 0;
}
}
if (i == t_params->count) {
tuner_dbg("TV frequency out of range (%d > %d)",
- params->frequency, t_params->ranges[i - 1].limit);
+ params->frequency, t_params->ranges[i - 1].limit);
params->frequency = t_params->ranges[--i].limit;
}
config = t_params->ranges[i].config;
/* i == 0 -> VHF_LO
* i == 1 -> VHF_HI
* i == 2 -> UHF */
- tuner_dbg("tv: param %d, range %d\n",j,i);
+ tuner_dbg("tv: param %d, range %d\n", j, i);
- div=params->frequency + IFPCoff + offset;
+ div = params->frequency + IFPCoff + offset;
- tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n",
- params->frequency / 16, params->frequency % 16 * 100 / 16,
- IFPCoff / 16, IFPCoff % 16 * 100 / 16,
- offset / 16, offset % 16 * 100 / 16,
- div);
+ tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, "
+ "Offset=%d.%02d MHz, div=%0d\n",
+ params->frequency / 16, params->frequency % 16 * 100 / 16,
+ IFPCoff / 16, IFPCoff % 16 * 100 / 16,
+ offset / 16, offset % 16 * 100 / 16, div);
/* tv norm specific stuff for multi-norm tuners */
switch (priv->type) {
- case TUNER_PHILIPS_SECAM: // FI1216MF
+ case TUNER_PHILIPS_SECAM: /* FI1216MF */
/* 0x01 -> ??? no change ??? */
/* 0x02 -> PAL BDGHI / SECAM L */
/* 0x04 -> ??? PAL others / SECAM others ??? */
cb &= ~0x03;
- if (params->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM
+ if (params->std & V4L2_STD_SECAM_L)
+ /* also valid for V4L2_STD_SECAM */
cb |= PHILIPS_MF_SET_STD_L;
else if (params->std & V4L2_STD_SECAM_LC)
cb |= PHILIPS_MF_SET_STD_LC;
/* set to the correct mode (analog or digital) */
tuneraddr = priv->i2c_props.addr;
priv->i2c_props.addr = 0x0a;
- if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[0],2)))
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
- if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,&buffer[2],2)))
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+ if (2 != rc)
+ tuner_warn("i2c i/o error: rc == %d "
+ "(should be 2)\n", rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+ if (2 != rc)
+ tuner_warn("i2c i/o error: rc == %d "
+ "(should be 2)\n", rc);
priv->i2c_props.addr = tuneraddr;
/* FIXME: input */
break;
if (t_params->has_tda9887) {
struct v4l2_priv_tun_config tda9887_cfg;
int config = 0;
- int is_secam_l = (params->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) &&
- !(params->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC));
+ int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
+ V4L2_STD_SECAM_LC)) &&
+ !(params->std & ~(V4L2_STD_SECAM_L |
+ V4L2_STD_SECAM_LC));
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &config;
config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
config |= TDA9887_PORT2_ACTIVE;
- }
- else {
+ } else {
if (t_params->port1_active)
config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active)
config |= TDA9887_TOP(t_params->default_top_secam_mid);
else if (t_params->default_top_secam_high)
config |= TDA9887_TOP(t_params->default_top_secam_high);
- }
- else {
+ } else {
if (i == 0 && t_params->default_top_low)
config |= TDA9887_TOP(t_params->default_top_low);
else if (i == 1 && t_params->default_top_mid)
&tda9887_cfg);
}
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0],buffer[1],buffer[2],buffer[3]);
+ buffer[0], buffer[1], buffer[2], buffer[3]);
- if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
+ if (4 != rc)
+ tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
switch (priv->type) {
case TUNER_LG_TDVS_H06XF:
buffer[0] &= ~0x20;
buffer[0] |= 0x18;
buffer[1] = 0x20;
- tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]);
+ tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]);
- if (2 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,2)))
- tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
+ if (2 != rc)
+ tuner_warn("i2c i/o error: rc == %d "
+ "(should be 2)\n", rc);
break;
case TUNER_MICROTUNE_4042FI5:
{
- // FIXME - this may also work for other tuners
+ /* FIXME - this may also work for other tuners */
unsigned long timeout = jiffies + msecs_to_jiffies(1);
u8 status_byte = 0;
/* Wait until the PLL locks */
for (;;) {
- if (time_after(jiffies,timeout))
+ if (time_after(jiffies, timeout))
return 0;
- if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,&status_byte,1))) {
- tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc);
+ rc = tuner_i2c_xfer_recv(&priv->i2c_props,
+ &status_byte, 1);
+ if (1 != rc) {
+ tuner_warn("i2c i/o read error: rc == %d "
+ "(should be 1)\n", rc);
break;
}
if (status_byte & TUNER_PLL_LOCKED)
buffer[2] = config;
buffer[3] = cb;
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0],buffer[1],buffer[2],buffer[3]);
+ buffer[0], buffer[1], buffer[2], buffer[3]);
- if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
+ if (4 != rc)
+ tuner_warn("i2c i/o error: rc == %d "
+ "(should be 4)\n", rc);
break;
}
}
freq += (unsigned int)(41.3*16000);
break;
default:
- tuner_warn("Unsupported radio_if value %d\n", t_params->radio_if);
+ tuner_warn("Unsupported radio_if value %d\n",
+ t_params->radio_if);
return 0;
}
switch (priv->type) {
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
- tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
+ tuner_dbg("This tuner doesn't have FM. "
+ "Most cards have a TEA5767 for FM\n");
return 0;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
}
tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
- buffer[0],buffer[1],buffer[2],buffer[3]);
+ buffer[0], buffer[1], buffer[2], buffer[3]);
priv->last_div = div;
if (t_params->has_tda9887) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &config;
- if (t_params->port1_active && !t_params->port1_fm_high_sensitivity)
+ if (t_params->port1_active &&
+ !t_params->port1_fm_high_sensitivity)
config |= TDA9887_PORT1_ACTIVE;
- if (t_params->port2_active && !t_params->port2_fm_high_sensitivity)
+ if (t_params->port2_active &&
+ !t_params->port2_fm_high_sensitivity)
config |= TDA9887_PORT2_ACTIVE;
if (t_params->intercarrier_mode)
config |= TDA9887_INTERCARRIER;
if (t_params->radio_if == 2)
config |= TDA9887_RIF_41_3;
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
- &tda9887_cfg);
+ &tda9887_cfg);
}
- if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,buffer,4)))
- tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
+ rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
+ if (4 != rc)
+ tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
return 0;
}
priv->type = cfg->type;
priv->tun = cfg->tun;
- memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, sizeof(struct dvb_tuner_ops));
+ memcpy(&fe->ops.tuner_ops, &simple_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
tuner_info("type set to %d (%s)\n", cfg->type, cfg->tun->name);
- strlcpy(fe->ops.tuner_ops.info.name, cfg->tun->name, sizeof(fe->ops.tuner_ops.info.name));
+ strlcpy(fe->ops.tuner_ops.info.name, cfg->tun->name,
+ sizeof(fe->ops.tuner_ops.info.name));
return fe;
}
-
-
EXPORT_SYMBOL_GPL(simple_tuner_attach);
MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver");