clk: baikal-t1: Mark Ethernet PLL as critical

We've discovered that disabling the so called Ethernet PLL causes reset of
the devices consuming its outgoing clock. The resets happen automatically
even if each underlying clock gate is turned off. Due to that we can't
disable the Ethernet PLL until the kernel is prepared for the corresponding
resets. So for now just mark the PLL clock provider as critical.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200920110335.18034-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

diff --git a/drivers/clk/baikal-t1/clk-ccu-pll.c b/drivers/clk/baikal-t1/clk-ccu-pll.c
index 1eec8c0b8f50fcdaf95ade7545715195e5cee580..2445d4b12bafa09e9413ff4750bd7511c2d2c852 100644 (file)
--- a/drivers/clk/baikal-t1/clk-ccu-pll.c
+++ b/drivers/clk/baikal-t1/clk-ccu-pll.c
@@ -51,11 +51,13 @@ struct ccu_pll_info {
 };
 
 /*
- * Mark as critical all PLLs except Ethernet one. CPU and DDR PLLs are sources
- * of CPU cores and DDR controller reference clocks, due to which they
- * obviously shouldn't be ever gated. SATA and PCIe PLLs are the parents of
- * APB-bus and DDR controller AXI-bus clocks. If they are gated the system will
- * be unusable.
+ * Alas we have to mark all PLLs as critical. CPU and DDR PLLs are sources of
+ * CPU cores and DDR controller reference clocks, due to which they obviously
+ * shouldn't be ever gated. SATA and PCIe PLLs are the parents of APB-bus and
+ * DDR controller AXI-bus clocks. If they are gated the system will be
+ * unusable. Moreover disabling SATA and Ethernet PLLs causes automatic reset
+ * of the corresponding subsystems. So until we aren't ready to re-initialize
+ * all the devices consuming those PLLs, they will be marked as critical too.
  */
 static const struct ccu_pll_info pll_info[] = {
        CCU_PLL_INFO(CCU_CPU_PLL, "cpu_pll", "ref_clk", CCU_CPU_PLL_BASE,
@@ -67,7 +69,7 @@ static const struct ccu_pll_info pll_info[] = {
        CCU_PLL_INFO(CCU_PCIE_PLL, "pcie_pll", "ref_clk", CCU_PCIE_PLL_BASE,
                     CLK_IS_CRITICAL),
        CCU_PLL_INFO(CCU_ETH_PLL, "eth_pll", "ref_clk", CCU_ETH_PLL_BASE,
-                    CLK_SET_RATE_GATE)
+                    CLK_IS_CRITICAL | CLK_SET_RATE_GATE)
 };
 
 struct ccu_pll_data {