ARM: dts: lpc32xx: phy3250: add NAND partitions device node

To declare MTD OF partitions NAND controller device node should have
a special 'partitions' subnode, the change removes a debug message
from mtd/ofpart on boot:

  nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000.
  Trying to parse direct subnodes as partitions.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index c1a6e624bf19505b907cba187626a1060705a747..fd95e2b10357755478f544075bb2ac30d3ace486 100644 (file)
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -136,8 +136,6 @@
 
 /* 64MB Flash via SLC NAND controller */
 &slc {
-       #address-cells = <1>;
-       #size-cells = <1>;
        status = "okay";
 
        nxp,wdr-clks = <14>;
@@ -151,31 +149,37 @@
        nand-on-flash-bbt;
        gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
 
-       mtd0@00000000 {
-               label = "phy3250-boot";
-               reg = <0x00000000 0x00064000>;
-               read-only;
-       };
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
 
-       mtd1@00064000 {
-               label = "phy3250-uboot";
-               reg = <0x00064000 0x00190000>;
-               read-only;
-       };
+               mtd0@00000000 {
+                       label = "phy3250-boot";
+                       reg = <0x00000000 0x00064000>;
+                       read-only;
+               };
 
-       mtd2@001f4000 {
-               label = "phy3250-ubt-prms";
-               reg = <0x001f4000 0x00010000>;
-       };
+               mtd1@00064000 {
+                       label = "phy3250-uboot";
+                       reg = <0x00064000 0x00190000>;
+                       read-only;
+               };
 
-       mtd3@00204000 {
-               label = "phy3250-kernel";
-               reg = <0x00204000 0x00400000>;
-       };
+               mtd2@001f4000 {
+                       label = "phy3250-ubt-prms";
+                       reg = <0x001f4000 0x00010000>;
+               };
 
-       mtd4@00604000 {
-               label = "phy3250-rootfs";
-               reg = <0x00604000 0x039fc000>;
+               mtd3@00204000 {
+                       label = "phy3250-kernel";
+                       reg = <0x00204000 0x00400000>;
+               };
+
+               mtd4@00604000 {
+                       label = "phy3250-rootfs";
+                       reg = <0x00604000 0x039fc000>;
+               };
        };
 };