]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
leds-bcm6328: add more init configuration options
authorÁlvaro Fernández Rojas <noltari@gmail.com>
Thu, 8 Oct 2015 10:35:54 +0000 (12:35 +0200)
committerJacek Anaszewski <j.anaszewski@samsung.com>
Tue, 3 Nov 2015 07:59:44 +0000 (08:59 +0100)
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
drivers/leds/leds-bcm6328.c

index bf063fae4ad096a6918dd6a56ea41f6810bdac5e..18de0942c79545e02c88e33b7c30a564ae256f8f 100644 (file)
 #define BCM6328_SERIAL_LED_SHIFT_DIR   BIT(16)
 #define BCM6328_LED_SHIFT_TEST         BIT(30)
 #define BCM6328_LED_TEST               BIT(31)
+#define BCM6328_INIT_MASK              (BCM6328_SERIAL_LED_EN | \
+                                        BCM6328_SERIAL_LED_MUX  | \
+                                        BCM6328_SERIAL_LED_CLK_NPOL | \
+                                        BCM6328_SERIAL_LED_DATA_PPOL | \
+                                        BCM6328_SERIAL_LED_SHIFT_DIR)
 
 #define BCM6328_LED_MODE_MASK          3
 #define BCM6328_LED_MODE_OFF           0
@@ -366,9 +371,17 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
        bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
 
        val = bcm6328_led_read(mem + BCM6328_REG_INIT);
-       val &= ~BCM6328_SERIAL_LED_EN;
+       val &= ~(BCM6328_INIT_MASK);
        if (of_property_read_bool(np, "brcm,serial-leds"))
                val |= BCM6328_SERIAL_LED_EN;
+       if (of_property_read_bool(np, "brcm,serial-mux"))
+               val |= BCM6328_SERIAL_LED_MUX;
+       if (of_property_read_bool(np, "brcm,serial-clk-low"))
+               val |= BCM6328_SERIAL_LED_CLK_NPOL;
+       if (!of_property_read_bool(np, "brcm,serial-dat-low"))
+               val |= BCM6328_SERIAL_LED_DATA_PPOL;
+       if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
+               val |= BCM6328_SERIAL_LED_SHIFT_DIR;
        bcm6328_led_write(mem + BCM6328_REG_INIT, val);
 
        for_each_available_child_of_node(np, child) {