#include "hw-ops.h"
#include "../regd.h"
#include "ar9002_phy.h"
+#include "ar5008_initvals.h"
/* All code below is for AR5008, AR9001, AR9002 */
static const int m1ThreshExt_off = 127;
static const int m2ThreshExt_off = 127;
+static const struct ar5416IniArray bank0 = STATIC_INI_ARRAY(ar5416Bank0);
+static const struct ar5416IniArray bank1 = STATIC_INI_ARRAY(ar5416Bank1);
+static const struct ar5416IniArray bank2 = STATIC_INI_ARRAY(ar5416Bank2);
+static const struct ar5416IniArray bank3 = STATIC_INI_ARRAY(ar5416Bank3);
+static const struct ar5416IniArray bank7 = STATIC_INI_ARRAY(ar5416Bank7);
-static void ar5008_rf_bank_setup(u32 *bank, struct ar5416IniArray *array,
- int col)
-{
- int i;
-
- for (i = 0; i < array->ia_rows; i++)
- bank[i] = INI_RA(array, i, col);
-}
-
-
-#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) \
- ar5008_write_rf_array(ah, iniarray, regData, &(regWr))
-
-static void ar5008_write_rf_array(struct ath_hw *ah, struct ar5416IniArray *array,
- u32 *data, unsigned int *writecnt)
+static void ar5008_write_bank6(struct ath_hw *ah, unsigned int *writecnt)
{
+ struct ar5416IniArray *array = &ah->iniBank6;
+ u32 *data = ah->analogBank6Data;
int r;
ENABLE_REGWRITE_BUFFER(ah);
ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
/* write Bank 6 with new params */
- REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes);
+ ar5008_write_bank6(ah, ®_writes);
}
/**
*/
static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah)
{
-#define ATH_ALLOC_BANK(bank, size) do { \
- bank = devm_kzalloc(ah->dev, sizeof(u32) * size, GFP_KERNEL); \
- if (!bank) \
- goto error; \
- } while (0);
-
- struct ath_common *common = ath9k_hw_common(ah);
+ int size = ah->iniBank6.ia_rows * sizeof(u32);
if (AR_SREV_9280_20_OR_LATER(ah))
return 0;
- ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows);
- ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows);
- ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows);
- ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows);
- ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
- ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
+ ah->analogBank6Data = devm_kzalloc(ah->dev, size, GFP_KERNEL);
+ if (!ah->analogBank6Data)
+ return -ENOMEM;
return 0;
-#undef ATH_ALLOC_BANK
-error:
- ath_err(common, "Cannot allocate RF banks\n");
- return -ENOMEM;
}
/* Setup rf parameters */
eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
- /* Setup Bank 0 Write */
- ar5008_rf_bank_setup(ah->analogBank0Data, &ah->iniBank0, 1);
-
- /* Setup Bank 1 Write */
- ar5008_rf_bank_setup(ah->analogBank1Data, &ah->iniBank1, 1);
-
- /* Setup Bank 2 Write */
- ar5008_rf_bank_setup(ah->analogBank2Data, &ah->iniBank2, 1);
-
- /* Setup Bank 6 Write */
- ar5008_rf_bank_setup(ah->analogBank3Data, &ah->iniBank3,
- modesIndex);
-
for (i = 0; i < ah->iniBank6.ia_rows; i++)
ah->analogBank6Data[i] = INI_RA(&ah->iniBank6, i, modesIndex);
}
}
- /* Setup Bank 7 Setup */
- ar5008_rf_bank_setup(ah->analogBank7Data, &ah->iniBank7, 1);
-
/* Write Analog registers */
- REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data, regWrites);
- REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data, regWrites);
- REG_WRITE_RF_ARRAY(&ah->iniBank2, ah->analogBank2Data, regWrites);
- REG_WRITE_RF_ARRAY(&ah->iniBank3, ah->analogBank3Data, regWrites);
- REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, regWrites);
- REG_WRITE_RF_ARRAY(&ah->iniBank7, ah->analogBank7Data, regWrites);
+ REG_WRITE_ARRAY(&bank0, 1, regWrites);
+ REG_WRITE_ARRAY(&bank1, 1, regWrites);
+ REG_WRITE_ARRAY(&bank2, 1, regWrites);
+ REG_WRITE_ARRAY(&bank3, modesIndex, regWrites);
+ ar5008_write_bank6(ah, ®Writes);
+ REG_WRITE_ARRAY(&bank7, 1, regWrites);
return true;
}