#endif
static int power_save = -1;
static int led_on = 100, led_off; /* defaults to LED that is on while in use */
-static struct {
- int type;
- char serial_number[30];
- int device_node;
- struct pwc_device *pdev;
-} device_hint[MAX_DEV_HINTS];
/***/
static void pwc_video_release(struct v4l2_device *v)
{
struct pwc_device *pdev = container_of(v, struct pwc_device, v4l2_dev);
- int hint;
-
- /* search device_hint[] table if we occupy a slot, by any chance */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++)
- if (device_hint[hint].pdev == pdev)
- device_hint[hint].pdev = NULL;
v4l2_ctrl_handler_free(&pdev->ctrl_handler);
-
kfree(pdev->ctrl_buf);
kfree(pdev);
}
struct usb_device *udev = interface_to_usbdev(intf);
struct pwc_device *pdev = NULL;
int vendor_id, product_id, type_id;
- int hint, rc;
+ int rc;
int features = 0;
int compression = 0;
- int video_nr = -1; /* default: use next available device */
int my_power_save = power_save;
char serial_number[30], *name;
pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
PWC_DEBUG_PROBE("Release: %04x\n", pdev->release);
- /* Now search device_hint[] table for a match, so we can hint a node number. */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++) {
- if (((device_hint[hint].type == -1) || (device_hint[hint].type == pdev->type)) &&
- (device_hint[hint].pdev == NULL)) {
- /* so far, so good... try serial number */
- if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) {
- /* match! */
- video_nr = device_hint[hint].device_node;
- PWC_DEBUG_PROBE("Found hint, will try to register as /dev/video%d\n", video_nr);
- break;
- }
- }
- }
-
- /* occupy slot */
- if (hint < MAX_DEV_HINTS)
- device_hint[hint].pdev = pdev;
-
/* Allocate USB command buffers */
pdev->ctrl_buf = kmalloc(sizeof(pdev->cmd_buf), GFP_KERNEL);
if (!pdev->ctrl_buf) {
pdev->v4l2_dev.ctrl_handler = &pdev->ctrl_handler;
pdev->vdev.v4l2_dev = &pdev->v4l2_dev;
- rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
+ rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, -1);
if (rc < 0) {
PWC_ERROR("Failed to register as video device (%d).\n", rc);
goto err_unregister_v4l2_dev;
err_free_controls:
v4l2_ctrl_handler_free(&pdev->ctrl_handler);
err_free_mem:
- if (hint < MAX_DEV_HINTS)
- device_hint[hint].pdev = NULL;
kfree(pdev->ctrl_buf);
kfree(pdev);
return rc;
static int leds[2] = { -1, -1 };
static unsigned int leds_nargs;
-static char *dev_hint[MAX_DEV_HINTS];
-static unsigned int dev_hint_nargs;
#ifdef CONFIG_USB_PWC_DEBUG
module_param_named(trace, pwc_trace, int, 0644);
#endif
module_param(power_save, int, 0644);
module_param_array(leds, int, &leds_nargs, 0444);
-module_param_array(dev_hint, charp, &dev_hint_nargs, 0444);
#ifdef CONFIG_USB_PWC_DEBUG
MODULE_PARM_DESC(trace, "For debugging purposes");
#endif
MODULE_PARM_DESC(power_save, "Turn power saving for new cameras on or off");
MODULE_PARM_DESC(leds, "LED on,off time in milliseconds");
-MODULE_PARM_DESC(dev_hint, "Device node hints");
MODULE_DESCRIPTION("Philips & OEM USB webcam driver");
MODULE_AUTHOR("Luc Saillard <luc@saillard.org>");
static int __init usb_pwc_init(void)
{
- int i;
-
-#ifdef CONFIG_USB_PWC_DEBUG
- PWC_INFO("Philips webcam module version " PWC_VERSION " loaded.\n");
- PWC_INFO("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
- PWC_INFO("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
- PWC_INFO("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
-
- if (pwc_trace >= 0) {
- PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace);
- }
-#endif
-
if (leds[0] >= 0)
led_on = leds[0];
if (leds[1] >= 0)
led_off = leds[1];
- /* Big device node whoopla. Basically, it allows you to assign a
- device node (/dev/videoX) to a camera, based on its type
- & serial number. The format is [type[.serialnumber]:]node.
-
- Any camera that isn't matched by these rules gets the next
- available free device node.
- */
- for (i = 0; i < MAX_DEV_HINTS; i++) {
- char *s, *colon, *dot;
-
- /* This loop also initializes the array */
- device_hint[i].pdev = NULL;
- s = dev_hint[i];
- if (s != NULL && *s != '\0') {
- device_hint[i].type = -1; /* wildcard */
- strcpy(device_hint[i].serial_number, "*");
-
- /* parse string: chop at ':' & '/' */
- colon = dot = s;
- while (*colon != '\0' && *colon != ':')
- colon++;
- while (*dot != '\0' && *dot != '.')
- dot++;
- /* Few sanity checks */
- if (*dot != '\0' && dot > colon) {
- PWC_ERROR("Malformed camera hint: the colon must be after the dot.\n");
- return -EINVAL;
- }
-
- if (*colon == '\0') {
- /* No colon */
- if (*dot != '\0') {
- PWC_ERROR("Malformed camera hint: no colon + device node given.\n");
- return -EINVAL;
- }
- else {
- /* No type or serial number specified, just a number. */
- device_hint[i].device_node =
- simple_strtol(s, NULL, 10);
- }
- }
- else {
- /* There's a colon, so we have at least a type and a device node */
- device_hint[i].type =
- simple_strtol(s, NULL, 10);
- device_hint[i].device_node =
- simple_strtol(colon + 1, NULL, 10);
- if (*dot != '\0') {
- /* There's a serial number as well */
- int k;
-
- dot++;
- k = 0;
- while (*dot != ':' && k < 29) {
- device_hint[i].serial_number[k++] = *dot;
- dot++;
- }
- device_hint[i].serial_number[k] = '\0';
- }
- }
- PWC_TRACE("device_hint[%d]:\n", i);
- PWC_TRACE(" type : %d\n", device_hint[i].type);
- PWC_TRACE(" serial# : %s\n", device_hint[i].serial_number);
- PWC_TRACE(" node : %d\n", device_hint[i].device_node);
- }
- else
- device_hint[i].type = 0; /* not filled */
- } /* ..for MAX_DEV_HINTS */
-
- PWC_DEBUG_PROBE("Registering driver at address 0x%p.\n", &pwc_driver);
return usb_register(&pwc_driver);
}
static void __exit usb_pwc_exit(void)
{
- PWC_DEBUG_MODULE("Deregistering driver.\n");
usb_deregister(&pwc_driver);
- PWC_INFO("Philips webcam module removed.\n");
}
module_init(usb_pwc_init);
module_exit(usb_pwc_exit);
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
projects / mirror_ubuntu-eoan-kernel.git / commitdiff