ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family

The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78]
voltage regulators values.

1. The voltage tables for configuring their registers mention range of
   voltages: 0.750 V to 3.55 V,
2. The constrains in electrical specifications say output voltage range
   to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V).

Adjust the ranges to match the electrical specifications to stay on the
safe side.  Also change the name of regulators to match reality.  Anyway
these regulators stay at default value so this should not have effect.

Reported-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 9843d21d692491fb7941dfc1707c5a70d31e76f0..829147e320e081165642924e5a7bf48e07b76eb9 100644 (file)
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -551,17 +551,17 @@
                        };
 
                        buck7_reg: BUCK7 {
-                               regulator-name = "vdd_1.0v_ldo";
-                               regulator-min-microvolt = <800000>;
+                               regulator-name = "vdd_1.35v_ldo";
+                               regulator-min-microvolt = <1200000>;
                                regulator-max-microvolt = <1500000>;
                                regulator-always-on;
                                regulator-boot-on;
                        };
 
                        buck8_reg: BUCK8 {
-                               regulator-name = "vdd_1.8v_ldo";
-                               regulator-min-microvolt = <800000>;
-                               regulator-max-microvolt = <2000000>;
+                               regulator-name = "vdd_2.0v_ldo";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <2100000>;
                                regulator-always-on;
                                regulator-boot-on;
                        };