]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/commitdiff
Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support
authorDaniel Drake <drake@endlessm.com>
Thu, 16 Apr 2015 20:09:55 +0000 (14:09 -0600)
committerMarcel Holtmann <marcel@holtmann.org>
Wed, 29 Apr 2015 23:05:30 +0000 (01:05 +0200)
Realtek ship a variety of bluetooth USB devices that identify
themselves with standard USB Bluetooth device class values, but
require a special driver to actually work. Without that driver,
you never get any scan results.

More recently however, Realtek appear to have wisened up and simply
posted a firmware update that makes these devices comply with
normal btusb protocols. The firmware needs to be uploaded on each boot.

Based on Realtek code from https://github.com/lwfinger/rtl8723au_bt
('new' branch).

This enables bluetooth support in the Gigabyte Brix GB-BXBT-2807 which
has this RTL8723BE USB device:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3410 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

There is no change to the USB descriptor after firmware update,
however the version read by HCI_OP_READ_LOCAL_VERSION changes from
0x8723 to 0x3083.

This has also been tested on RTL8723AE and RTL8821AE. Support for
RTL8761A has also been added, but that is untested.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
drivers/bluetooth/btusb.c

index de7b236eeae7777f71389ec42c233525d309aef2..84f998532117b4dff8f02a694e2e62dfa0bc6408 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/firmware.h>
+#include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -57,6 +58,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_AMP              0x4000
 #define BTUSB_QCA_ROME         0x8000
 #define BTUSB_BCM_APPLE                0x10000
+#define BTUSB_REALTEK          0x20000
 
 static const struct usb_device_id btusb_table[] = {
        /* Generic Bluetooth USB device */
@@ -288,6 +290,28 @@ static const struct usb_device_id blacklist_table[] = {
        { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
          .driver_info = BTUSB_IGNORE },
 
+       /* Realtek Bluetooth devices */
+       { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
+         .driver_info = BTUSB_REALTEK },
+
+       /* Additional Realtek 8723AE Bluetooth devices */
+       { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
+
+       /* Additional Realtek 8723BE Bluetooth devices */
+       { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
+
+       /* Additional Realtek 8821AE Bluetooth devices */
+       { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
+       { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+
        { }     /* Terminating entry */
 };
 
@@ -1345,6 +1369,378 @@ static int btusb_setup_csr(struct hci_dev *hdev)
        return ret;
 }
 
+#define RTL_FRAG_LEN 252
+
+struct rtl_download_cmd {
+       __u8 index;
+       __u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+       __u8 status;
+       __u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+       __u8 status;
+       __u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+       __u8 signature[8];
+       __le32 fw_version;
+       __le16 num_patches;
+} __packed;
+
+#define RTL_EPATCH_SIGNATURE   "Realtech"
+#define RTL_ROM_LMP_3499       0x3499
+#define RTL_ROM_LMP_8723A      0x1200
+#define RTL_ROM_LMP_8723B      0x8723
+#define RTL_ROM_LMP_8821A      0x8821
+#define RTL_ROM_LMP_8761A      0x8761
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+       struct rtl_rom_version_evt *rom_version;
+       struct sk_buff *skb;
+       int ret;
+
+       /* Read RTL ROM version command */
+       skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+       if (IS_ERR(skb)) {
+               BT_ERR("%s: Read ROM version failed (%ld)",
+                      hdev->name, PTR_ERR(skb));
+               return PTR_ERR(skb);
+       }
+
+       if (skb->len != sizeof(*rom_version)) {
+               BT_ERR("%s: RTL version event length mismatch", hdev->name);
+               kfree_skb(skb);
+               return -EIO;
+       }
+
+       rom_version = (struct rtl_rom_version_evt *)skb->data;
+       BT_INFO("%s: rom_version status=%x version=%x",
+               hdev->name, rom_version->status, rom_version->version);
+
+       ret = rom_version->status;
+       if (ret == 0)
+               *version = rom_version->version;
+
+       kfree_skb(skb);
+       return ret;
+}
+
+static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
+                                  const struct firmware *fw,
+                                  unsigned char **_buf)
+{
+       const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+       struct rtl_epatch_header *epatch_info;
+       unsigned char *buf;
+       int i, ret, len;
+       size_t min_size;
+       u8 opcode, length, data, rom_version = 0;
+       int project_id = -1;
+       const unsigned char *fwptr, *chip_id_base;
+       const unsigned char *patch_length_base, *patch_offset_base;
+       u32 patch_offset = 0;
+       u16 patch_length, num_patches;
+       const u16 project_id_to_lmp_subver[] = {
+               RTL_ROM_LMP_8723A,
+               RTL_ROM_LMP_8723B,
+               RTL_ROM_LMP_8821A,
+               RTL_ROM_LMP_8761A
+       };
+
+       ret = rtl_read_rom_version(hdev, &rom_version);
+       if (ret)
+               return -bt_to_errno(ret);
+
+       min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+       if (fw->size < min_size)
+               return -EINVAL;
+
+       fwptr = fw->data + fw->size - sizeof(extension_sig);
+       if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+               BT_ERR("%s: extension section signature mismatch", hdev->name);
+               return -EINVAL;
+       }
+
+       /* Loop from the end of the firmware parsing instructions, until
+        * we find an instruction that identifies the "project ID" for the
+        * hardware supported by this firwmare file.
+        * Once we have that, we double-check that that project_id is suitable
+        * for the hardware we are working with.
+        */
+       while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
+               opcode = *--fwptr;
+               length = *--fwptr;
+               data = *--fwptr;
+
+               BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+               if (opcode == 0xff) /* EOF */
+                       break;
+
+               if (length == 0) {
+                       BT_ERR("%s: found instruction with length 0",
+                              hdev->name);
+                       return -EINVAL;
+               }
+
+               if (opcode == 0 && length == 1) {
+                       project_id = data;
+                       break;
+               }
+
+               fwptr -= length;
+       }
+
+       if (project_id < 0) {
+               BT_ERR("%s: failed to find version instruction", hdev->name);
+               return -EINVAL;
+       }
+
+       if (project_id > ARRAY_SIZE(project_id_to_lmp_subver)) {
+               BT_ERR("%s: unknown project id %d", hdev->name, project_id);
+               return -EINVAL;
+       }
+
+       if (lmp_subver != project_id_to_lmp_subver[project_id]) {
+               BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
+                      project_id_to_lmp_subver[project_id], lmp_subver);
+               return -EINVAL;
+       }
+
+       epatch_info = (struct rtl_epatch_header *)fw->data;
+       if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+               BT_ERR("%s: bad EPATCH signature", hdev->name);
+               return -EINVAL;
+       }
+
+       num_patches = le16_to_cpu(epatch_info->num_patches);
+       BT_DBG("fw_version=%x, num_patches=%d",
+              le32_to_cpu(epatch_info->fw_version), num_patches);
+
+       /* After the rtl_epatch_header there is a funky patch metadata section.
+        * Assuming 2 patches, the layout is:
+        * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+        *
+        * Find the right patch for this chip.
+        */
+       min_size += 8 * num_patches;
+       if (fw->size < min_size)
+               return -EINVAL;
+
+       chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
+       patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+       patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+       for (i = 0; i < num_patches; i++) {
+               u16 chip_id = get_unaligned_le16(chip_id_base +
+                                                (i * sizeof(u16)));
+               if (chip_id == rom_version + 1) {
+                       patch_length = get_unaligned_le16(patch_length_base +
+                                                         (i * sizeof(u16)));
+                       patch_offset = get_unaligned_le32(patch_offset_base +
+                                                         (i * sizeof(u32)));
+                       break;
+               }
+       }
+
+       if (!patch_offset) {
+               BT_ERR("%s: didn't find patch for chip id %d",
+                      hdev->name, rom_version);
+               return -EINVAL;
+       }
+
+       BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+       min_size = patch_offset + patch_length;
+       if (fw->size < min_size)
+               return -EINVAL;
+
+       /* Copy the firmware into a new buffer and write the version at
+        * the end.
+        */
+       len = patch_length;
+       buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
+
+       memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+       *_buf = buf;
+       return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+                                const unsigned char *data, int fw_len)
+{
+       struct rtl_download_cmd *dl_cmd;
+       int frag_num = fw_len / RTL_FRAG_LEN + 1;
+       int frag_len = RTL_FRAG_LEN;
+       int ret = 0;
+       int i;
+
+       dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+       if (!dl_cmd)
+               return -ENOMEM;
+
+       for (i = 0; i < frag_num; i++) {
+               struct rtl_download_response *dl_resp;
+               struct sk_buff *skb;
+
+               BT_DBG("download fw (%d/%d)", i, frag_num);
+
+               dl_cmd->index = i;
+               if (i == (frag_num - 1)) {
+                       dl_cmd->index |= 0x80; /* data end */
+                       frag_len = fw_len % RTL_FRAG_LEN;
+               }
+               memcpy(dl_cmd->data, data, frag_len);
+
+               /* Send download command */
+               skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+                                    HCI_INIT_TIMEOUT);
+               if (IS_ERR(skb)) {
+                       BT_ERR("%s: download fw command failed (%ld)",
+                              hdev->name, PTR_ERR(skb));
+                       ret = -PTR_ERR(skb);
+                       goto out;
+               }
+
+               if (skb->len != sizeof(*dl_resp)) {
+                       BT_ERR("%s: download fw event length mismatch",
+                              hdev->name);
+                       kfree_skb(skb);
+                       ret = -EIO;
+                       goto out;
+               }
+
+               dl_resp = (struct rtl_download_response *)skb->data;
+               if (dl_resp->status != 0) {
+                       kfree_skb(skb);
+                       ret = bt_to_errno(dl_resp->status);
+                       goto out;
+               }
+
+               kfree_skb(skb);
+               data += RTL_FRAG_LEN;
+       }
+
+out:
+       kfree(dl_cmd);
+       return ret;
+}
+
+static int btusb_setup_rtl8723a(struct hci_dev *hdev)
+{
+       struct btusb_data *data = dev_get_drvdata(&hdev->dev);
+       struct usb_device *udev = interface_to_usbdev(data->intf);
+       const struct firmware *fw;
+       int ret;
+
+       BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
+       ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev);
+       if (ret < 0) {
+               BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
+               return ret;
+       }
+
+       if (fw->size < 8) {
+               ret = -EINVAL;
+               goto out;
+       }
+
+       /* Check that the firmware doesn't have the epatch signature
+        * (which is only for RTL8723B and newer).
+        */
+       if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
+               BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
+               ret = -EINVAL;
+               goto out;
+       }
+
+       ret = rtl_download_firmware(hdev, fw->data, fw->size);
+
+out:
+       release_firmware(fw);
+       return ret;
+}
+
+static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
+                               const char *fw_name)
+{
+       struct btusb_data *data = dev_get_drvdata(&hdev->dev);
+       struct usb_device *udev = interface_to_usbdev(data->intf);
+       unsigned char *fw_data = NULL;
+       const struct firmware *fw;
+       int ret;
+
+       BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
+       ret = request_firmware(&fw, fw_name, &udev->dev);
+       if (ret < 0) {
+               BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
+               return ret;
+       }
+
+       ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
+       if (ret < 0)
+               goto out;
+
+       ret = rtl_download_firmware(hdev, fw_data, ret);
+       kfree(fw_data);
+       if (ret < 0)
+               goto out;
+
+out:
+       release_firmware(fw);
+       return ret;
+}
+
+static int btusb_setup_realtek(struct hci_dev *hdev)
+{
+       struct sk_buff *skb;
+       struct hci_rp_read_local_version *resp;
+       u16 lmp_subver;
+
+       skb = btusb_read_local_version(hdev);
+       if (IS_ERR(skb))
+               return -PTR_ERR(skb);
+
+       resp = (struct hci_rp_read_local_version *)skb->data;
+       BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
+               "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
+               resp->lmp_ver, resp->lmp_subver);
+
+       lmp_subver = le16_to_cpu(resp->lmp_subver);
+       kfree_skb(skb);
+
+       /* Match a set of subver values that correspond to stock firmware,
+        * which is not compatible with standard btusb.
+        * If matched, upload an alternative firmware that does conform to
+        * standard btusb. Once that firmware is uploaded, the subver changes
+        * to a different value.
+        */
+       switch (lmp_subver) {
+       case RTL_ROM_LMP_8723A:
+       case RTL_ROM_LMP_3499:
+               return btusb_setup_rtl8723a(hdev);
+       case RTL_ROM_LMP_8723B:
+               return btusb_setup_rtl8723b(hdev, lmp_subver,
+                                           "rtl_bt/rtl8723b_fw.bin");
+       case RTL_ROM_LMP_8821A:
+               return btusb_setup_rtl8723b(hdev, lmp_subver,
+                                           "rtl_bt/rtl8821a_fw.bin");
+       case RTL_ROM_LMP_8761A:
+               return btusb_setup_rtl8723b(hdev, lmp_subver,
+                                           "rtl_bt/rtl8761a_fw.bin");
+       default:
+               BT_INFO("rtl: assuming no firmware upload needed.");
+               return 0;
+       }
+}
+
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
                                                       struct intel_version *ver)
 {
@@ -2776,6 +3172,9 @@ static int btusb_probe(struct usb_interface *intf,
                hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
        }
 
+       if (id->driver_info & BTUSB_REALTEK)
+               hdev->setup = btusb_setup_realtek;
+
        if (id->driver_info & BTUSB_AMP) {
                /* AMP controllers do not support SCO packets */
                data->isoc = NULL;