ARM: dts: wandboard: Add support for SDIO bcm4329

The wandboard has a Broadcom 4329 WiFi connected via SDIO. This patch
sets the required pins to enable the wifi module.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 77188cbf047a2d2087649e97785348398fef3686..a55113e65bcb0a3d9d6345f7129623384ee881b6 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -73,9 +73,14 @@
        hog {
                pinctrl_hog: hoggrp {
                        fsl,pins = <
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-                               MX6QDL_PAD_GPIO_2__GPIO1_IO02   0x80000000
-                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09  0x80000000
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x130b0
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000
+                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09   0x80000000
+                               MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
+                               MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
                        >;
                };
        };