MN10300: Fix up the IRQ names for the on-chip serial ports

Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as
request_interrupt() no longer allows names containing slashes, giving a warning
like the following if one is encountered:

	------------[ cut here ]------------
	WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c()
	name 'ttySM0/Rx'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 9d49073e827a26429335b54cc51cff3304433ac7..db509dd80565b9e91c2b661c08c5fd64bc52e8d4 100644 (file)
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -156,17 +156,17 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
        ._intr          = &SC0ICR,
        ._rxb           = &SC0RXB,
        ._txb           = &SC0TXB,
-       .rx_name        = "ttySM0/Rx",
-       .tx_name        = "ttySM0/Tx",
+       .rx_name        = "ttySM0:Rx",
+       .tx_name        = "ttySM0:Tx",
 #ifdef CONFIG_MN10300_TTYSM0_TIMER8
-       .tm_name        = "ttySM0/Timer8",
+       .tm_name        = "ttySM0:Timer8",
        ._tmxmd         = &TM8MD,
        ._tmxbr         = &TM8BR,
        ._tmicr         = &TM8ICR,
        .tm_irq         = TM8IRQ,
        .div_timer      = MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM0_TIMER2 */
-       .tm_name        = "ttySM0/Timer2",
+       .tm_name        = "ttySM0:Timer2",
        ._tmxmd         = &TM2MD,
        ._tmxbr         = (volatile u16 *) &TM2BR,
        ._tmicr         = &TM2ICR,
@@ -209,17 +209,17 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
        ._intr          = &SC1ICR,
        ._rxb           = &SC1RXB,
        ._txb           = &SC1TXB,
-       .rx_name        = "ttySM1/Rx",
-       .tx_name        = "ttySM1/Tx",
+       .rx_name        = "ttySM1:Rx",
+       .tx_name        = "ttySM1:Tx",
 #ifdef CONFIG_MN10300_TTYSM1_TIMER9
-       .tm_name        = "ttySM1/Timer9",
+       .tm_name        = "ttySM1:Timer9",
        ._tmxmd         = &TM9MD,
        ._tmxbr         = &TM9BR,
        ._tmicr         = &TM9ICR,
        .tm_irq         = TM9IRQ,
        .div_timer      = MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM1_TIMER3 */
-       .tm_name        = "ttySM1/Timer3",
+       .tm_name        = "ttySM1:Timer3",
        ._tmxmd         = &TM3MD,
        ._tmxbr         = (volatile u16 *) &TM3BR,
        ._tmicr         = &TM3ICR,
@@ -260,9 +260,9 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
        .uart.lock      =
        __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
        .name           = "ttySM2",
-       .rx_name        = "ttySM2/Rx",
-       .tx_name        = "ttySM2/Tx",
-       .tm_name        = "ttySM2/Timer10",
+       .rx_name        = "ttySM2:Rx",
+       .tx_name        = "ttySM2:Tx",
+       .tm_name        = "ttySM2:Timer10",
        ._iobase        = &SC2CTR,
        ._control       = &SC2CTR,
        ._status        = &SC2STR,