FAQ: Explain what to do when building against a too-new kernel.

Also add references to this FAQ from INSTALL and configure.

Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Gurucharan Shetty <gshetty@nicira.com>

diff --git a/FAQ b/FAQ
index 6b4be439dc83e0a7e6a66891c74f575900bdc980..c43b0c8f3b3177cc55c30b4a714ebad90e9fd362 100644 (file)
--- a/FAQ
+++ b/FAQ
@@ -158,18 +158,22 @@ A: The following table lists the Linux kernel versions against which the
    It should build against almost any kernel, certainly against 2.6.32
    and later.
 
-Q: What Linux kernel versions does IPFIX flow monitoring work with?
+Q: I get an error like this when I configure Open vSwitch:
 
-A: IPFIX flow monitoring requires the Linux kernel module from Open
-   vSwitch version 1.10.90 or later.
+       configure: error: Linux kernel in <dir> is version <x>, but
+       version newer than <y> is not supported (please refer to the
+       FAQ for advice)
 
-Q: Should userspace or kernel be upgraded first to minimize downtime?
+   What should I do?
 
-   In general, the Open vSwitch userspace should be used with the
-   kernel version included in the same release or with the version
-   from upstream Linux.  However, when upgrading between two releases
-   of Open vSwitch it is best to migrate userspace first to reduce
-   the possibility of incompatibilities.
+A: If there is a newer version of Open vSwitch, consider building that
+   one, because it may support the kernel that you are building
+   against.  (To find out, consult the table in the previous answer.)
+
+   Otherwise, use the Linux kernel module supplied with the kernel
+   that you are using.  All versions of Open vSwitch userspace are
+   compatible with all versions of the Open vSwitch kernel module, so
+   this will also work.  See also the following question.
 
 Q: What features are not available in the Open vSwitch kernel datapath
    that ships as part of the upstream Linux kernel?
@@ -193,6 +197,19 @@ A: Tunnel virtual ports are not supported, as described in the
    actions.  On Linux kernels before 2.6.39, maximum-sized VLAN packets
    may not be transmitted.
 
+Q: What Linux kernel versions does IPFIX flow monitoring work with?
+
+A: IPFIX flow monitoring requires the Linux kernel module from Open
+   vSwitch version 1.10.90 or later.
+
+Q: Should userspace or kernel be upgraded first to minimize downtime?
+
+   In general, the Open vSwitch userspace should be used with the
+   kernel version included in the same release or with the version
+   from upstream Linux.  However, when upgrading between two releases
+   of Open vSwitch it is best to migrate userspace first to reduce
+   the possibility of incompatibilities.
+
 Q: What happened to the bridge compatibility feature?
 
 A: Bridge compatibility was a feature of Open vSwitch 1.9 and earlier.

diff --git a/INSTALL b/INSTALL
index f43c65bab2f832de70e1d4f1c7e21e73685cee13..afefb518196162b4bf3abb3a841ca4ad9a4dfdb8 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -177,6 +177,10 @@ Prerequisites section, follow the procedure below to build.
 
       % ./configure --with-linux=/lib/modules/`uname -r`/build
 
+   If --with-linux requests building for an unsupported version of
+   Linux, then "configure" will fail with an error message.  Please
+   refer to the FAQ for advice in that case.
+
    If you wish to build the kernel module for an architecture other
    than the architecture of the machine used for the build, you may
    specify the kernel architecture string using the KARCH variable

diff --git a/acinclude.m4 b/acinclude.m4
index 4269620a00890a9b2c3d40eb029dc871fe507eee..e6bed37c31eb29fefd11b44fd54abee2d6809a5e 100644 (file)
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -137,7 +137,7 @@ AC_DEFUN([OVS_CHECK_LINUX], [
        if test "$version" = 3 && test "$patchlevel" -le 13; then
           : # Linux 3.x
        else
-         AC_ERROR([Linux kernel in $KBUILD is version $kversion, but version newer than 3.13.x is not supported])
+         AC_ERROR([Linux kernel in $KBUILD is version $kversion, but version newer than 3.13.x is not supported (please refer to the FAQ for advice)])
        fi
     else
        if test "$version" -le 1 || test "$patchlevel" -le 5 || test "$sublevel" -le 31; then