]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
authorLang Yu <lang.yu@amd.com>
Fri, 27 Aug 2021 07:20:51 +0000 (15:20 +0800)
committerAlex Deucher <alexander.deucher@amd.com>
Thu, 16 Sep 2021 13:56:23 +0000 (09:56 -0400)
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.

v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.

Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
"vc"    - sclk voltage curve
"point" - must be 0
"sclk"  - target value of sclk(MHz), should be in safe range
"vddc"  - target value of vddc(mV), a 6.25(mV) stepping is
  recommended and should be in safe range (the real
  vddc is an approximation of target value)
echo c > pp_od_clk_voltage
"c" - commit the changes of sclk and vddc, only after
  the commit command, the target values set by "vc"
  command will take effect
echo r > pp_od_clk_voltage
"r"  - reset sclk and vddc to default value, a subsequent
  commit command is needed to take effect

Example:
1) Check default sclk and vddc
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 862mV *
OD_RANGE:
SCLK:    1000Mhz       2000Mhz
VDDC:     700mV        1129mV
2) Set sclk to 1500MHz and vddc to 700mV
$ echo vc 0 1500 700 > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1500Mhz *
OD_VDDC:
0: 693mV *
OD_RANGE:
SCLK:    1000Mhz       2000Mhz
VDDC:     700mV        1129mV
3) Reset sclk and vddc to default
$ echo r > pp_od_clk_voltage
$ echo c > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 1800Mhz *
OD_VDDC:
0: 874mV *
OD_RANGE:
SCLK:    1000Mhz       2000Mhz
VDDC:     700mV        1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/pm/inc/smu_types.h
drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c

index 6f1b1b50d527c6c0f43b9edd8e3d551d0b7dc6e1..18b862a90fbe5c8857686b35acc0616f8c27aa87 100644 (file)
        __SMU_DUMMY_MAP(SetUclkDpmMode),                \
        __SMU_DUMMY_MAP(LightSBR),                      \
        __SMU_DUMMY_MAP(GfxDriverResetRecovery),        \
-       __SMU_DUMMY_MAP(BoardPowerCalibration),
+       __SMU_DUMMY_MAP(BoardPowerCalibration),   \
+       __SMU_DUMMY_MAP(RequestGfxclk),           \
+       __SMU_DUMMY_MAP(ForceGfxVid),             \
+       __SMU_DUMMY_MAP(UnforceGfxVid),
 
 #undef __SMU_DUMMY_MAP
 #define __SMU_DUMMY_MAP(type)  SMU_MSG_##type
index e1fab030cfc508d6020a1342a3150d5c84528f32..3d4c65bc29dc3daa29c53753421764c79d710bcc 100644 (file)
 #undef pr_info
 #undef pr_debug
 
+/* unit: MHz */
+#define CYAN_SKILLFISH_SCLK_MIN                        1000
+#define CYAN_SKILLFISH_SCLK_MAX                        2000
+#define CYAN_SKILLFISH_SCLK_DEFAULT                    1800
+
+/* unit: mV */
+#define CYAN_SKILLFISH_VDDC_MIN                        700
+#define CYAN_SKILLFISH_VDDC_MAX                        1129
+#define CYAN_SKILLFISH_VDDC_MAGIC                      5118 // 0x13fe
+
+static struct gfx_user_settings {
+       uint32_t sclk;
+       uint32_t vddc;
+} cyan_skillfish_user_settings;
+
 #define FEATURE_MASK(feature) (1ULL << feature)
 #define SMC_DPM_FEATURE ( \
        FEATURE_MASK(FEATURE_FCLK_DPM_BIT)      |       \
@@ -297,6 +312,27 @@ static int cyan_skillfish_print_clk_levels(struct smu_context *smu,
        smu_cmn_get_sysfs_buf(&buf, &size);
 
        switch (clk_type) {
+       case SMU_OD_SCLK:
+               ret  = cyan_skillfish_get_smu_metrics_data(smu, METRICS_CURR_GFXCLK, &cur_value);
+               if (ret)
+                       return ret;
+               size += sysfs_emit_at(buf, size,"%s:\n", "OD_SCLK");
+               size += sysfs_emit_at(buf, size, "0: %uMhz *\n", cur_value);
+               break;
+       case SMU_OD_VDDC_CURVE:
+               ret  = cyan_skillfish_get_smu_metrics_data(smu, METRICS_VOLTAGE_VDDGFX, &cur_value);
+               if (ret)
+                       return ret;
+               size += sysfs_emit_at(buf, size,"%s:\n", "OD_VDDC");
+               size += sysfs_emit_at(buf, size, "0: %umV *\n", cur_value);
+               break;
+       case SMU_OD_RANGE:
+               size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+               size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n",
+                                               CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+               size += sysfs_emit_at(buf, size, "VDDC: %7umV  %10umV\n",
+                                               CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+               break;
        case SMU_GFXCLK:
        case SMU_SCLK:
        case SMU_FCLK:
@@ -394,6 +430,103 @@ static ssize_t cyan_skillfish_get_gpu_metrics(struct smu_context *smu,
        return sizeof(struct gpu_metrics_v2_2);
 }
 
+static int cyan_skillfish_od_edit_dpm_table(struct smu_context *smu,
+                                       enum PP_OD_DPM_TABLE_COMMAND type,
+                                       long input[], uint32_t size)
+{
+       int ret = 0;
+       uint32_t vid;
+
+       switch (type) {
+       case PP_OD_EDIT_VDDC_CURVE:
+               if (size != 3 || input[0] != 0) {
+                       dev_err(smu->adev->dev, "Invalid parameter!\n");
+                       return -EINVAL;
+               }
+
+               if (input[1] <= CYAN_SKILLFISH_SCLK_MIN ||
+                       input[1] > CYAN_SKILLFISH_SCLK_MAX) {
+                       dev_err(smu->adev->dev, "Invalid sclk! Valid sclk range: %uMHz - %uMhz\n",
+                                       CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+                       return -EINVAL;
+               }
+
+               if (input[2] <= CYAN_SKILLFISH_VDDC_MIN ||
+                       input[2] > CYAN_SKILLFISH_VDDC_MAX) {
+                       dev_err(smu->adev->dev, "Invalid vddc! Valid vddc range: %umV - %umV\n",
+                                       CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+                       return -EINVAL;
+               }
+
+               cyan_skillfish_user_settings.sclk = input[1];
+               cyan_skillfish_user_settings.vddc = input[2];
+
+               break;
+       case PP_OD_RESTORE_DEFAULT_TABLE:
+               if (size != 0) {
+                       dev_err(smu->adev->dev, "Invalid parameter!\n");
+                       return -EINVAL;
+               }
+
+               cyan_skillfish_user_settings.sclk = CYAN_SKILLFISH_SCLK_DEFAULT;
+               cyan_skillfish_user_settings.vddc = CYAN_SKILLFISH_VDDC_MAGIC;
+
+               break;
+       case PP_OD_COMMIT_DPM_TABLE:
+               if (size != 0) {
+                       dev_err(smu->adev->dev, "Invalid parameter!\n");
+                       return -EINVAL;
+               }
+
+               if (cyan_skillfish_user_settings.sclk < CYAN_SKILLFISH_SCLK_MIN ||
+                   cyan_skillfish_user_settings.sclk > CYAN_SKILLFISH_SCLK_MAX) {
+                       dev_err(smu->adev->dev, "Invalid sclk! Valid sclk range: %uMHz - %uMhz\n",
+                                       CYAN_SKILLFISH_SCLK_MIN, CYAN_SKILLFISH_SCLK_MAX);
+                       return -EINVAL;
+               }
+
+               if ((cyan_skillfish_user_settings.vddc != CYAN_SKILLFISH_VDDC_MAGIC) &&
+                       (cyan_skillfish_user_settings.vddc < CYAN_SKILLFISH_VDDC_MIN ||
+                       cyan_skillfish_user_settings.vddc > CYAN_SKILLFISH_VDDC_MAX)) {
+                       dev_err(smu->adev->dev, "Invalid vddc! Valid vddc range: %umV - %umV\n",
+                                       CYAN_SKILLFISH_VDDC_MIN, CYAN_SKILLFISH_VDDC_MAX);
+                       return -EINVAL;
+               }
+
+               ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_RequestGfxclk,
+                                       cyan_skillfish_user_settings.sclk, NULL);
+               if (ret) {
+                       dev_err(smu->adev->dev, "Set sclk failed!\n");
+                       return ret;
+               }
+
+               if (cyan_skillfish_user_settings.vddc == CYAN_SKILLFISH_VDDC_MAGIC) {
+                       ret = smu_cmn_send_smc_msg(smu, SMU_MSG_UnforceGfxVid, NULL);
+                       if (ret) {
+                               dev_err(smu->adev->dev, "Unforce vddc failed!\n");
+                               return ret;
+                       }
+               } else {
+                       /*
+                        * PMFW accepts SVI2 VID code, convert voltage to VID:
+                        * vid = (uint32_t)((1.55 - voltage) * 160.0 + 0.00001)
+                        */
+                       vid = (1550 - cyan_skillfish_user_settings.vddc) * 160 / 1000;
+                       ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_ForceGfxVid, vid, NULL);
+                       if (ret) {
+                               dev_err(smu->adev->dev, "Force vddc failed!\n");
+                               return ret;
+                       }
+               }
+
+               break;
+       default:
+               return -EOPNOTSUPP;
+       }
+
+       return ret;
+}
+
 static const struct pptable_funcs cyan_skillfish_ppt_funcs = {
 
        .check_fw_status = smu_v11_0_check_fw_status,
@@ -406,6 +539,7 @@ static const struct pptable_funcs cyan_skillfish_ppt_funcs = {
        .print_clk_levels = cyan_skillfish_print_clk_levels,
        .is_dpm_running = cyan_skillfish_is_dpm_running,
        .get_gpu_metrics = cyan_skillfish_get_gpu_metrics,
+       .od_edit_dpm_table = cyan_skillfish_od_edit_dpm_table,
        .register_irq_handler = smu_v11_0_register_irq_handler,
        .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location,
        .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param,