]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/commitdiff
MIPS: lantiq: Remove separate GPHY Firmware loader
authorHauke Mehrtens <hauke@hauke-m.de>
Fri, 22 Feb 2019 20:13:47 +0000 (21:13 +0100)
committerPaul Burton <paul.burton@mips.com>
Mon, 25 Feb 2019 22:17:10 +0000 (14:17 -0800)
The separate GPHY Firmware loader driver is not used any more, the GPHY
firmware is now loaded by the GSWIP switch driver which also makes use
of the GPHY.
Remove the old unused GPHY firmware loader driver.

The GPHY firmware is useless without an Ethernet and switch driver, it
should not harm if loading this does not work for system using an old
device tree.
I am not aware of any vendor separating the device tree from the kernel
binary, it should be ok to remove this.

The code and the functionality form this separate GPHY firmware loader
was added to the gswip driver in commit 14fceff4771e ("net: dsa: Add
Lantiq / Intel DSA driver for vrx200")

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: netdev@vger.kernel.org
Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt [deleted file]
Documentation/devicetree/bindings/mips/lantiq/rcu.txt
arch/mips/configs/xway_defconfig
arch/mips/lantiq/Kconfig
drivers/soc/lantiq/Makefile
drivers/soc/lantiq/gphy.c [deleted file]

diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
deleted file mode 100644 (file)
index a0c19bd..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-Lantiq XWAY SoC GPHY binding
-============================
-
-This binding describes a software-defined ethernet PHY, provided by the RCU
-module on newer Lantiq XWAY SoCs (xRX200 and newer).
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible           : Should be one of
-                               "lantiq,xrx200a1x-gphy"
-                               "lantiq,xrx200a2x-gphy"
-                               "lantiq,xrx300-gphy"
-                               "lantiq,xrx330-gphy"
-- reg                  : Addrress of the GPHY FW load address register
-- resets               : Must reference the RCU GPHY reset bit
-- reset-names          : One entry, value must be "gphy" or optional "gphy2"
-- clocks               : A reference to the (PMU) GPHY clock gate
-
-Optional properties:
-- lantiq,gphy-mode     : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
-                         <dt-bindings/mips/lantiq_xway_gphy.h>
-
-
--------------------------------------------------------------------------------
-Example for the GPHys on the xRX200 SoCs:
-
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-       gphy0: gphy@20 {
-               compatible = "lantiq,xrx200a2x-gphy";
-               reg = <0x20 0x4>;
-
-               resets = <&reset0 31 30>, <&reset1 7 7>;
-               reset-names = "gphy", "gphy2";
-               clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
-               lantiq,gphy-mode = <GPHY_MODE_GE>;
-       };
index 7f0822b4beae404f630ba9d222b8560d5440fcec..58d51f480c9ec385eb6b848dc935cf649acd1c44 100644 (file)
@@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC:
                ranges = <0x0 0x203000 0x100>;
                big-endian;
 
-               gphy0: gphy@20 {
-                       compatible = "lantiq,xrx200a2x-gphy";
-                       reg = <0x20 0x4>;
-
-                       resets = <&reset0 31 30>, <&reset1 7 7>;
-                       reset-names = "gphy", "gphy2";
-                       lantiq,gphy-mode = <GPHY_MODE_GE>;
-               };
-
-               gphy1: gphy@68 {
-                       compatible = "lantiq,xrx200a2x-gphy";
-                       reg = <0x68 0x4>;
-
-                       resets = <&reset0 29 28>, <&reset1 6 6>;
-                       reset-names = "gphy", "gphy2";
-                       lantiq,gphy-mode = <GPHY_MODE_GE>;
-               };
-
                reset0: reset-controller@10 {
                        compatible = "lantiq,xrx200-reset";
                        reg = <0x10 4>, <0x14 4>;
index c3cac29e8414c644885982716b7c5f5f4d543dfb..2bb02ea9fb4ee06c10855ffe9328df25c5153d6f 100644 (file)
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_LANTIQ=y
 CONFIG_PCI_LANTIQ=y
-CONFIG_XRX200_PHY_FW=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_MIPS_VPE_LOADER=y
 CONFIG_NR_CPUS=2
index 188de95d6dbdc337b16c7c753c1ccc8ab4f893b2..6c6802e482c98c80fee921d895ce9bef6f8ae0e7 100644 (file)
@@ -52,8 +52,4 @@ config PCI_LANTIQ
        bool "PCI Support"
        depends on SOC_XWAY && PCI
 
-config XRX200_PHY_FW
-       bool "XRX200 PHY firmware loader"
-       depends on SOC_XWAY
-
 endif
index be9e866d53e5022f59d73737cbdc4503c32f3f83..35aa86bd10233cb82438a2f3cc65758e21982dc7 100644 (file)
@@ -1,2 +1 @@
 obj-y                          += fpi-bus.o
-obj-$(CONFIG_XRX200_PHY_FW)    += gphy.o
diff --git a/drivers/soc/lantiq/gphy.c b/drivers/soc/lantiq/gphy.c
deleted file mode 100644 (file)
index feeb17c..0000000
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2012 John Crispin <blogic@phrozen.org>
- *  Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
- *  Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/firmware.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <linux/property.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-#include <lantiq_soc.h>
-
-#define XRX200_GPHY_FW_ALIGN   (16 * 1024)
-
-struct xway_gphy_priv {
-       struct clk *gphy_clk_gate;
-       struct reset_control *gphy_reset;
-       struct reset_control *gphy_reset2;
-       void __iomem *membase;
-       char *fw_name;
-};
-
-struct xway_gphy_match_data {
-       char *fe_firmware_name;
-       char *ge_firmware_name;
-};
-
-static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
-       .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
-       .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
-};
-
-static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
-       .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
-       .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
-};
-
-static const struct xway_gphy_match_data xrx300_gphy_data = {
-       .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
-       .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
-};
-
-static const struct of_device_id xway_gphy_match[] = {
-       { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
-       { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
-       { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-       { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data },
-       {},
-};
-MODULE_DEVICE_TABLE(of, xway_gphy_match);
-
-static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
-                         dma_addr_t *dev_addr)
-{
-       const struct firmware *fw;
-       void *fw_addr;
-       dma_addr_t dma_addr;
-       size_t size;
-       int ret;
-
-       ret = request_firmware(&fw, priv->fw_name, dev);
-       if (ret) {
-               dev_err(dev, "failed to load firmware: %s, error: %i\n",
-                       priv->fw_name, ret);
-               return ret;
-       }
-
-       /*
-        * GPHY cores need the firmware code in a persistent and contiguous
-        * memory area with a 16 kB boundary aligned start address.
-        */
-       size = fw->size + XRX200_GPHY_FW_ALIGN;
-
-       fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
-       if (fw_addr) {
-               fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
-               *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
-               memcpy(fw_addr, fw->data, fw->size);
-       } else {
-               dev_err(dev, "failed to alloc firmware memory\n");
-               ret = -ENOMEM;
-       }
-
-       release_firmware(fw);
-
-       return ret;
-}
-
-static int xway_gphy_of_probe(struct platform_device *pdev,
-                             struct xway_gphy_priv *priv)
-{
-       struct device *dev = &pdev->dev;
-       const struct xway_gphy_match_data *gphy_fw_name_cfg;
-       u32 gphy_mode;
-       int ret;
-       struct resource *res_gphy;
-
-       gphy_fw_name_cfg = of_device_get_match_data(dev);
-
-       priv->gphy_clk_gate = devm_clk_get(dev, NULL);
-       if (IS_ERR(priv->gphy_clk_gate)) {
-               dev_err(dev, "Failed to lookup gate clock\n");
-               return PTR_ERR(priv->gphy_clk_gate);
-       }
-
-       res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       priv->membase = devm_ioremap_resource(dev, res_gphy);
-       if (IS_ERR(priv->membase))
-               return PTR_ERR(priv->membase);
-
-       priv->gphy_reset = devm_reset_control_get(dev, "gphy");
-       if (IS_ERR(priv->gphy_reset)) {
-               if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER)
-                       dev_err(dev, "Failed to lookup gphy reset\n");
-               return PTR_ERR(priv->gphy_reset);
-       }
-
-       priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2");
-       if (IS_ERR(priv->gphy_reset2))
-               return PTR_ERR(priv->gphy_reset2);
-
-       ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode);
-       /* Default to GE mode */
-       if (ret)
-               gphy_mode = GPHY_MODE_GE;
-
-       switch (gphy_mode) {
-       case GPHY_MODE_FE:
-               priv->fw_name = gphy_fw_name_cfg->fe_firmware_name;
-               break;
-       case GPHY_MODE_GE:
-               priv->fw_name = gphy_fw_name_cfg->ge_firmware_name;
-               break;
-       default:
-               dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
-               return -EINVAL;
-       }
-
-       return 0;
-}
-
-static int xway_gphy_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       struct xway_gphy_priv *priv;
-       dma_addr_t fw_addr = 0;
-       int ret;
-
-       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-       if (!priv)
-               return -ENOMEM;
-
-       ret = xway_gphy_of_probe(pdev, priv);
-       if (ret)
-               return ret;
-
-       ret = clk_prepare_enable(priv->gphy_clk_gate);
-       if (ret)
-               return ret;
-
-       ret = xway_gphy_load(dev, priv, &fw_addr);
-       if (ret) {
-               clk_disable_unprepare(priv->gphy_clk_gate);
-               return ret;
-       }
-
-       reset_control_assert(priv->gphy_reset);
-       reset_control_assert(priv->gphy_reset2);
-
-       iowrite32be(fw_addr, priv->membase);
-
-       reset_control_deassert(priv->gphy_reset);
-       reset_control_deassert(priv->gphy_reset2);
-
-       platform_set_drvdata(pdev, priv);
-
-       return ret;
-}
-
-static int xway_gphy_remove(struct platform_device *pdev)
-{
-       struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
-
-       iowrite32be(0, priv->membase);
-
-       clk_disable_unprepare(priv->gphy_clk_gate);
-
-       return 0;
-}
-
-static struct platform_driver xway_gphy_driver = {
-       .probe = xway_gphy_probe,
-       .remove = xway_gphy_remove,
-       .driver = {
-               .name = "xway-rcu-gphy",
-               .of_match_table = xway_gphy_match,
-       },
-};
-
-module_platform_driver(xway_gphy_driver);
-
-MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
-MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
-MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
-MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
-MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
-MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
-MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader");
-MODULE_LICENSE("GPL");