ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1

"push-pull" configuration is now fully handled by the gpiolib and the
STMFX pinctrl driver. There is no longer need to declare a pinctrl group
to only configure "push-pull" setting for the line. It is done directly by
the gpiolib.

Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 89d29b50c3f46df13ba252fa914aee8de50a0dfc..9928d43233ffc9a1059ca24e73e773c9f83a3d8e 100644 (file)
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -183,14 +183,12 @@
 
        ov5640: camera@3c {
                compatible = "ovti,ov5640";
-               pinctrl-names = "default";
-               pinctrl-0 = <&ov5640_pins>;
                reg = <0x3c>;
                clocks = <&clk_ext_camera>;
                clock-names = "xclk";
                DOVDD-supply = <&v2v8>;
-               powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
-               reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
+               powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
+               reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
                rotation = <180>;
                status = "okay";
 
@@ -226,12 +224,6 @@
                                drive-push-pull;
                                bias-pull-down;
                        };
-
-                       ov5640_pins: camera {
-                               pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
-                               drive-push-pull;
-                               output-low;
-                       };
                };
        };
 };