#include <asm/pci-direct.h>
#include <asm/acpi.h>
#include <asm/apic.h>
+#include <asm/irq.h>
#ifdef CONFIG_ACPI
return 0;
}
+static void check_intel(void)
+{
+ u16 vendor, device;
+
+ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
+
+ if (vendor != PCI_VENDOR_ID_INTEL)
+ return;
+
+ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
+#ifdef CONFIG_SMP
+ if (device == PCI_DEVICE_ID_INTEL_E7320_MCH ||
+ device == PCI_DEVICE_ID_INTEL_E7520_MCH ||
+ device == PCI_DEVICE_ID_INTEL_E7525_MCH)
+ quirk_intel_irqbalance();
+#endif
+}
+
void __init check_acpi_pci(void)
{
int num, slot, func;
if (!early_pci_allowed())
return;
+ check_intel();
+
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++) {
for (slot = 0; slot < 32; slot++) {
*/
#include <linux/pci.h>
#include <linux/irq.h>
+#include <asm/pci-direct.h>
+#include <asm/genapic.h>
+#include <asm/cpu.h>
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
+static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
+{
+#ifdef CONFIG_X86_64
+ if (genapic != &apic_flat)
+ panic("APIC mode must be flat on this system\n");
+#elif defined(CONFIG_X86_GENERICARCH)
+ if (genapic != &apic_default)
+ panic("APIC mode must be default(flat) on this system. Use apic=default\n");
+#endif
+}
-static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
+void __init quirk_intel_irqbalance(void)
{
u8 config, rev;
u32 word;
* based platforms.
* Disable SW irqbalance/affinity on those platforms.
*/
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
+ rev = read_pci_config_byte(0, 0, 0, PCI_CLASS_REVISION);
if (rev > 0x9)
return;
printk(KERN_INFO "Intel E7520/7320/7525 detected.");
- /* enable access to config space*/
- pci_read_config_byte(dev, 0xf4, &config);
- pci_write_config_byte(dev, 0xf4, config|0x2);
+ /* enable access to config space */
+ config = read_pci_config_byte(0, 0, 0, 0xf4);
+ write_pci_config_byte(0, 0, 0, 0xf4, config|0x2);
/* read xTPR register */
- raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
+ word = read_pci_config_16(0, 0, 0x40, 0x4c);
if (!(word & (1 << 13))) {
printk(KERN_INFO "Disabling irq balancing and affinity\n");
noirqdebug_setup("");
#ifdef CONFIG_PROC_FS
no_irq_affinity = 1;
+#endif
+#ifdef CONFIG_HOTPLUG_CPU
+ printk(KERN_INFO "Disabling cpu hotplug control\n");
+ enable_cpu_hotplug = 0;
+#endif
+#ifdef CONFIG_X86_64
+ /* force the genapic selection to flat mode so that
+ * interrupts can be redirected to more than one CPU.
+ */
+ genapic_force = &apic_flat;
#endif
}
- /* put back the original value for config space*/
+ /* put back the original value for config space */
if (!(config & 0x2))
- pci_write_config_byte(dev, 0xf4, config);
+ write_pci_config_byte(0, 0, 0, 0xf4, config);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, verify_quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, verify_quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, verify_quirk_intel_irqbalance);
+
#endif
{
}
+static void intel_bugs(void)
+{
+ u16 device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
+
+#ifdef CONFIG_SMP
+ if (device == PCI_DEVICE_ID_INTEL_E7320_MCH ||
+ device == PCI_DEVICE_ID_INTEL_E7520_MCH ||
+ device == PCI_DEVICE_ID_INTEL_E7525_MCH)
+ quirk_intel_irqbalance();
+#endif
+}
+
struct chipset {
u16 vendor;
void (*f)(void);
{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
{ PCI_VENDOR_ID_VIA, via_bugs },
{ PCI_VENDOR_ID_ATI, ati_bugs },
+ { PCI_VENDOR_ID_INTEL, intel_bugs},
{}
};