#define DM_MSG_PREFIX "raid"
/*
- * If the MD doesn't support MD_SYNC_STATE_FORCED yet, then
- * make it so the flag doesn't set anything.
+ * The following flags are used by dm-raid.c to set up the array state.
+ * They must be cleared before md_run is called.
*/
-#ifndef MD_SYNC_STATE_FORCED
-#define MD_SYNC_STATE_FORCED 0
-#endif
+#define FirstUse 10 /* rdev flag */
struct raid_dev {
/*
{
int i;
- for (i = 0; i < rs->md.raid_disks; i++)
+ for (i = 0; i < rs->md.raid_disks; i++) {
+ if (rs->dev[i].meta_dev)
+ dm_put_device(rs->ti, rs->dev[i].meta_dev);
+ if (rs->dev[i].rdev.sb_page)
+ put_page(rs->dev[i].rdev.sb_page);
+ rs->dev[i].rdev.sb_page = NULL;
+ rs->dev[i].rdev.sb_loaded = 0;
if (rs->dev[i].data_dev)
dm_put_device(rs->ti, rs->dev[i].data_dev);
+ }
kfree(rs);
}
* <meta_dev>: meta device name or '-' if missing
* <data_dev>: data device name or '-' if missing
*
- * This code parses those words.
+ * The following are permitted:
+ * - -
+ * - <data_dev>
+ * <meta_dev> <data_dev>
+ *
+ * The following is not allowed:
+ * <meta_dev> -
+ *
+ * This code parses those words. If there is a failure,
+ * the caller must use context_free to unwind the operations.
*/
static int dev_parms(struct raid_set *rs, char **argv)
{
rs->dev[i].rdev.mddev = &rs->md;
if (strcmp(argv[0], "-")) {
- rs->ti->error = "Metadata devices not supported";
- return -EINVAL;
+ ret = dm_get_device(rs->ti, argv[0],
+ dm_table_get_mode(rs->ti->table),
+ &rs->dev[i].meta_dev);
+ rs->ti->error = "RAID metadata device lookup failure";
+ if (ret)
+ return ret;
+
+ rs->dev[i].rdev.sb_page = alloc_page(GFP_KERNEL);
+ if (!rs->dev[i].rdev.sb_page)
+ return -ENOMEM;
}
if (!strcmp(argv[1], "-")) {
return -EINVAL;
}
+ rs->ti->error = "No data device supplied with metadata device";
+ if (rs->dev[i].meta_dev)
+ return -EINVAL;
+
continue;
}
return ret;
}
+ if (rs->dev[i].meta_dev) {
+ metadata_available = 1;
+ rs->dev[i].rdev.meta_bdev = rs->dev[i].meta_dev->bdev;
+ }
rs->dev[i].rdev.bdev = rs->dev[i].data_dev->bdev;
list_add(&rs->dev[i].rdev.same_set, &rs->md.disks);
if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
num_raid_params--;
/*
- * Second, parse the unordered optional arguments
+ * We set each individual device as In_sync with a completed
+ * 'recovery_offset'. If there has been a device failure or
+ * replacement then one of the following cases applies:
+ *
+ * 1) User specifies 'rebuild'.
+ * - Device is reset when param is read.
+ * 2) A new device is supplied.
+ * - No matching superblock found, resets device.
+ * 3) Device failure was transient and returns on reload.
+ * - Failure noticed, resets device for bitmap replay.
+ * 4) Device hadn't completed recovery after previous failure.
+ * - Superblock is read and overrides recovery_offset.
+ *
+ * What is found in the superblocks of the devices is always
+ * authoritative, unless 'rebuild' or '[no]sync' was specified.
*/
- for (i = 0; i < rs->md.raid_disks; i++)
+ for (i = 0; i < rs->md.raid_disks; i++) {
set_bit(In_sync, &rs->dev[i].rdev.flags);
+ rs->dev[i].rdev.recovery_offset = MaxSector;
+ }
+ /*
+ * Second, parse the unordered optional arguments
+ */
for (i = 0; i < num_raid_params; i++) {
if (!strcasecmp(argv[i], "nosync")) {
rs->md.recovery_cp = MaxSector;
rs->print_flags |= DMPF_NOSYNC;
- rs->md.flags |= MD_SYNC_STATE_FORCED;
continue;
}
if (!strcasecmp(argv[i], "sync")) {
rs->md.recovery_cp = 0;
rs->print_flags |= DMPF_SYNC;
- rs->md.flags |= MD_SYNC_STATE_FORCED;
continue;
}
return md_raid5_congested(&rs->md, bits);
}
+/*
+ * This structure is never routinely used by userspace, unlike md superblocks.
+ * Devices with this superblock should only ever be accessed via device-mapper.
+ */
+#define DM_RAID_MAGIC 0x64526D44
+struct dm_raid_superblock {
+ __le32 magic; /* "DmRd" */
+ __le32 features; /* Used to indicate possible future changes */
+
+ __le32 num_devices; /* Number of devices in this array. (Max 64) */
+ __le32 array_position; /* The position of this drive in the array */
+
+ __le64 events; /* Incremented by md when superblock updated */
+ __le64 failed_devices; /* Bit field of devices to indicate failures */
+
+ /*
+ * This offset tracks the progress of the repair or replacement of
+ * an individual drive.
+ */
+ __le64 disk_recovery_offset;
+
+ /*
+ * This offset tracks the progress of the initial array
+ * synchronisation/parity calculation.
+ */
+ __le64 array_resync_offset;
+
+ /*
+ * RAID characteristics
+ */
+ __le32 level;
+ __le32 layout;
+ __le32 stripe_sectors;
+
+ __u8 pad[452]; /* Round struct to 512 bytes. */
+ /* Always set to 0 when writing. */
+} __packed;
+
+static int read_disk_sb(mdk_rdev_t *rdev, int size)
+{
+ BUG_ON(!rdev->sb_page);
+
+ if (rdev->sb_loaded)
+ return 0;
+
+ if (!sync_page_io(rdev, 0, size, rdev->sb_page, READ, 1)) {
+ DMERR("Failed to read device superblock");
+ return -EINVAL;
+ }
+
+ rdev->sb_loaded = 1;
+
+ return 0;
+}
+
+static void super_sync(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ mdk_rdev_t *r, *t;
+ uint64_t failed_devices;
+ struct dm_raid_superblock *sb;
+
+ sb = page_address(rdev->sb_page);
+ failed_devices = le64_to_cpu(sb->failed_devices);
+
+ rdev_for_each(r, t, mddev)
+ if ((r->raid_disk >= 0) && test_bit(Faulty, &r->flags))
+ failed_devices |= (1ULL << r->raid_disk);
+
+ memset(sb, 0, sizeof(*sb));
+
+ sb->magic = cpu_to_le32(DM_RAID_MAGIC);
+ sb->features = cpu_to_le32(0); /* No features yet */
+
+ sb->num_devices = cpu_to_le32(mddev->raid_disks);
+ sb->array_position = cpu_to_le32(rdev->raid_disk);
+
+ sb->events = cpu_to_le64(mddev->events);
+ sb->failed_devices = cpu_to_le64(failed_devices);
+
+ sb->disk_recovery_offset = cpu_to_le64(rdev->recovery_offset);
+ sb->array_resync_offset = cpu_to_le64(mddev->recovery_cp);
+
+ sb->level = cpu_to_le32(mddev->level);
+ sb->layout = cpu_to_le32(mddev->layout);
+ sb->stripe_sectors = cpu_to_le32(mddev->chunk_sectors);
+}
+
+/*
+ * super_load
+ *
+ * This function creates a superblock if one is not found on the device
+ * and will decide which superblock to use if there's a choice.
+ *
+ * Return: 1 if use rdev, 0 if use refdev, -Exxx otherwise
+ */
+static int super_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev)
+{
+ int ret;
+ struct dm_raid_superblock *sb;
+ struct dm_raid_superblock *refsb;
+ uint64_t events_sb, events_refsb;
+
+ rdev->sb_start = 0;
+ rdev->sb_size = sizeof(*sb);
+
+ ret = read_disk_sb(rdev, rdev->sb_size);
+ if (ret)
+ return ret;
+
+ sb = page_address(rdev->sb_page);
+ if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) {
+ super_sync(rdev->mddev, rdev);
+
+ set_bit(FirstUse, &rdev->flags);
+
+ /* Force writing of superblocks to disk */
+ set_bit(MD_CHANGE_DEVS, &rdev->mddev->flags);
+
+ /* Any superblock is better than none, choose that if given */
+ return refdev ? 0 : 1;
+ }
+
+ if (!refdev)
+ return 1;
+
+ events_sb = le64_to_cpu(sb->events);
+
+ refsb = page_address(refdev->sb_page);
+ events_refsb = le64_to_cpu(refsb->events);
+
+ return (events_sb > events_refsb) ? 1 : 0;
+}
+
+static int super_init_validation(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ int role;
+ struct raid_set *rs = container_of(mddev, struct raid_set, md);
+ uint64_t events_sb;
+ uint64_t failed_devices;
+ struct dm_raid_superblock *sb;
+ uint32_t new_devs = 0;
+ uint32_t rebuilds = 0;
+ mdk_rdev_t *r, *t;
+ struct dm_raid_superblock *sb2;
+
+ sb = page_address(rdev->sb_page);
+ events_sb = le64_to_cpu(sb->events);
+ failed_devices = le64_to_cpu(sb->failed_devices);
+
+ /*
+ * Initialise to 1 if this is a new superblock.
+ */
+ mddev->events = events_sb ? : 1;
+
+ /*
+ * Reshaping is not currently allowed
+ */
+ if ((le32_to_cpu(sb->level) != mddev->level) ||
+ (le32_to_cpu(sb->layout) != mddev->layout) ||
+ (le32_to_cpu(sb->stripe_sectors) != mddev->chunk_sectors)) {
+ DMERR("Reshaping arrays not yet supported.");
+ return -EINVAL;
+ }
+
+ /* We can only change the number of devices in RAID1 right now */
+ if ((rs->raid_type->level != 1) &&
+ (le32_to_cpu(sb->num_devices) != mddev->raid_disks)) {
+ DMERR("Reshaping arrays not yet supported.");
+ return -EINVAL;
+ }
+
+ if (!(rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)))
+ mddev->recovery_cp = le64_to_cpu(sb->array_resync_offset);
+
+ /*
+ * During load, we set FirstUse if a new superblock was written.
+ * There are two reasons we might not have a superblock:
+ * 1) The array is brand new - in which case, all of the
+ * devices must have their In_sync bit set. Also,
+ * recovery_cp must be 0, unless forced.
+ * 2) This is a new device being added to an old array
+ * and the new device needs to be rebuilt - in which
+ * case the In_sync bit will /not/ be set and
+ * recovery_cp must be MaxSector.
+ */
+ rdev_for_each(r, t, mddev) {
+ if (!test_bit(In_sync, &r->flags)) {
+ if (!test_bit(FirstUse, &r->flags))
+ DMERR("Superblock area of "
+ "rebuild device %d should have been "
+ "cleared.", r->raid_disk);
+ set_bit(FirstUse, &r->flags);
+ rebuilds++;
+ } else if (test_bit(FirstUse, &r->flags))
+ new_devs++;
+ }
+
+ if (!rebuilds) {
+ if (new_devs == mddev->raid_disks) {
+ DMINFO("Superblocks created for new array");
+ set_bit(MD_ARRAY_FIRST_USE, &mddev->flags);
+ } else if (new_devs) {
+ DMERR("New device injected "
+ "into existing array without 'rebuild' "
+ "parameter specified");
+ return -EINVAL;
+ }
+ } else if (new_devs) {
+ DMERR("'rebuild' devices cannot be "
+ "injected into an array with other first-time devices");
+ return -EINVAL;
+ } else if (mddev->recovery_cp != MaxSector) {
+ DMERR("'rebuild' specified while array is not in-sync");
+ return -EINVAL;
+ }
+
+ /*
+ * Now we set the Faulty bit for those devices that are
+ * recorded in the superblock as failed.
+ */
+ rdev_for_each(r, t, mddev) {
+ if (!r->sb_page)
+ continue;
+ sb2 = page_address(r->sb_page);
+ sb2->failed_devices = 0;
+
+ /*
+ * Check for any device re-ordering.
+ */
+ if (!test_bit(FirstUse, &r->flags) && (r->raid_disk >= 0)) {
+ role = le32_to_cpu(sb2->array_position);
+ if (role != r->raid_disk) {
+ if (rs->raid_type->level != 1) {
+ rs->ti->error = "Cannot change device "
+ "positions in RAID array";
+ return -EINVAL;
+ }
+ DMINFO("RAID1 device #%d now at position #%d",
+ role, r->raid_disk);
+ }
+
+ /*
+ * Partial recovery is performed on
+ * returning failed devices.
+ */
+ if (failed_devices & (1 << role))
+ set_bit(Faulty, &r->flags);
+ }
+ }
+
+ return 0;
+}
+
+static int super_validate(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ struct dm_raid_superblock *sb = page_address(rdev->sb_page);
+
+ /*
+ * If mddev->events is not set, we know we have not yet initialized
+ * the array.
+ */
+ if (!mddev->events && super_init_validation(mddev, rdev))
+ return -EINVAL;
+
+ mddev->bitmap_info.offset = 4096 >> 9; /* Enable bitmap creation */
+ rdev->mddev->bitmap_info.default_offset = 4096 >> 9;
+ if (!test_bit(FirstUse, &rdev->flags)) {
+ rdev->recovery_offset = le64_to_cpu(sb->disk_recovery_offset);
+ if (rdev->recovery_offset != MaxSector)
+ clear_bit(In_sync, &rdev->flags);
+ }
+
+ /*
+ * If a device comes back, set it as not In_sync and no longer faulty.
+ */
+ if (test_bit(Faulty, &rdev->flags)) {
+ clear_bit(Faulty, &rdev->flags);
+ clear_bit(In_sync, &rdev->flags);
+ rdev->saved_raid_disk = rdev->raid_disk;
+ rdev->recovery_offset = 0;
+ }
+
+ clear_bit(FirstUse, &rdev->flags);
+
+ return 0;
+}
+
+/*
+ * Analyse superblocks and select the freshest.
+ */
+static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
+{
+ int ret;
+ mdk_rdev_t *rdev, *freshest, *tmp;
+ mddev_t *mddev = &rs->md;
+
+ freshest = NULL;
+ rdev_for_each(rdev, tmp, mddev) {
+ if (!rdev->meta_bdev)
+ continue;
+
+ ret = super_load(rdev, freshest);
+
+ switch (ret) {
+ case 1:
+ freshest = rdev;
+ break;
+ case 0:
+ break;
+ default:
+ ti->error = "Failed to load superblock";
+ return ret;
+ }
+ }
+
+ if (!freshest)
+ return 0;
+
+ /*
+ * Validation of the freshest device provides the source of
+ * validation for the remaining devices.
+ */
+ ti->error = "Unable to assemble array: Invalid superblocks";
+ if (super_validate(mddev, freshest))
+ return -EINVAL;
+
+ rdev_for_each(rdev, tmp, mddev)
+ if ((rdev != freshest) && super_validate(mddev, rdev))
+ return -EINVAL;
+
+ return 0;
+}
+
/*
* Construct a RAID4/5/6 mapping:
* Args:
* <raid_type> <#raid_params> <raid_params> \
* <#raid_devs> { <meta_dev1> <dev1> .. <meta_devN> <devN> }
*
- * ** metadata devices are not supported yet, use '-' instead **
- *
* <raid_params> varies by <raid_type>. See 'parse_raid_params' for
* details on possible <raid_params>.
*/
if (ret)
goto bad;
+ rs->md.sync_super = super_sync;
+ ret = analyse_superblocks(ti, rs);
+ if (ret)
+ goto bad;
+
INIT_WORK(&rs->md.event_work, do_table_event);
ti->private = rs;
DMEMIT(" %d", rs->md.raid_disks);
for (i = 0; i < rs->md.raid_disks; i++) {
- DMEMIT(" -"); /* metadata device */
+ if (rs->dev[i].meta_dev)
+ DMEMIT(" %s", rs->dev[i].meta_dev->name);
+ else
+ DMEMIT(" -");
if (rs->dev[i].data_dev)
DMEMIT(" %s", rs->dev[i].data_dev->name);
{
struct raid_set *rs = ti->private;
+ bitmap_load(&rs->md);
mddev_resume(&rs->md);
}
projects / mirror_ubuntu-disco-kernel.git / commitdiff