#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/timer.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
*******************************************************************************
*/
-static irqreturn_t imx_udc_irq(int irq, void *dev)
+/*
+ * Called when timer expires.
+ * Timer is started when CFG_CHG is received.
+ */
+static void handle_config(unsigned long data)
{
- struct imx_udc_struct *imx_usb = dev;
+ struct imx_udc_struct *imx_usb = (void *)data;
struct usb_ctrlrequest u;
int temp, cfg, intf, alt;
- int intr = __raw_readl(imx_usb->base + USB_INTR);
-
- if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
- | INTR_RESET_STOP | INTR_CFG_CHG)) {
- dump_intr(__func__, intr, imx_usb->dev);
- dump_usb_stat(__func__, imx_usb);
- }
-
- if (!imx_usb->driver)
- goto end_irq;
-
- if (intr & INTR_WAKEUP) {
- if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
- && imx_usb->driver && imx_usb->driver->resume)
- imx_usb->driver->resume(&imx_usb->gadget);
- imx_usb->set_config = 0;
- imx_usb->gadget.speed = USB_SPEED_FULL;
- }
-
- if (intr & INTR_SUSPEND) {
- if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
- && imx_usb->driver && imx_usb->driver->suspend)
- imx_usb->driver->suspend(&imx_usb->gadget);
- imx_usb->set_config = 0;
- imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
- }
- if (intr & INTR_RESET_START) {
- __raw_writel(intr, imx_usb->base + USB_INTR);
- udc_stop_activity(imx_usb, imx_usb->driver);
- imx_usb->set_config = 0;
- imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
- }
-
- if (intr & INTR_RESET_STOP)
- imx_usb->gadget.speed = USB_SPEED_FULL;
+ local_irq_disable();
- if (intr & INTR_CFG_CHG) {
- __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
- temp = __raw_readl(imx_usb->base + USB_STAT);
- cfg = (temp & STAT_CFG) >> 5;
- intf = (temp & STAT_INTF) >> 3;
- alt = temp & STAT_ALTSET;
+ temp = __raw_readl(imx_usb->base + USB_STAT);
+ cfg = (temp & STAT_CFG) >> 5;
+ intf = (temp & STAT_INTF) >> 3;
+ alt = temp & STAT_ALTSET;
- D_REQ(imx_usb->dev,
- "<%s> orig config C=%d, I=%d, A=%d / "
- "req config C=%d, I=%d, A=%d\n",
- __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
- cfg, intf, alt);
+ D_REQ(imx_usb->dev,
+ "<%s> orig config C=%d, I=%d, A=%d / "
+ "req config C=%d, I=%d, A=%d\n",
+ __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
+ cfg, intf, alt);
- if (cfg != 1 && cfg != 2)
- goto end_irq;
+ if (cfg == 1 || cfg == 2) {
- imx_usb->set_config = 0;
-
- /* Config setup */
if (imx_usb->cfg != cfg) {
- D_REQ(imx_usb->dev,
- "<%s> Change config start\n", __func__);
u.bRequest = USB_REQ_SET_CONFIGURATION;
u.bRequestType = USB_DIR_OUT |
USB_TYPE_STANDARD |
u.wIndex = 0;
u.wLength = 0;
imx_usb->cfg = cfg;
- imx_usb->set_config = 1;
imx_usb->driver->setup(&imx_usb->gadget, &u);
- imx_usb->set_config = 0;
- D_REQ(imx_usb->dev,
- "<%s> Change config done\n", __func__);
}
if (imx_usb->intf != intf || imx_usb->alt != alt) {
- D_REQ(imx_usb->dev,
- "<%s> Change interface start\n", __func__);
u.bRequest = USB_REQ_SET_INTERFACE;
u.bRequestType = USB_DIR_OUT |
USB_TYPE_STANDARD |
u.wLength = 0;
imx_usb->intf = intf;
imx_usb->alt = alt;
- imx_usb->set_config = 1;
imx_usb->driver->setup(&imx_usb->gadget, &u);
- imx_usb->set_config = 0;
- D_REQ(imx_usb->dev,
- "<%s> Change interface done\n", __func__);
}
}
+ imx_usb->set_config = 0;
+
+ local_irq_enable();
+}
+
+static irqreturn_t imx_udc_irq(int irq, void *dev)
+{
+ struct imx_udc_struct *imx_usb = dev;
+ int intr = __raw_readl(imx_usb->base + USB_INTR);
+ int temp;
+
+ if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
+ | INTR_RESET_STOP | INTR_CFG_CHG)) {
+ dump_intr(__func__, intr, imx_usb->dev);
+ dump_usb_stat(__func__, imx_usb);
+ }
+
+ if (!imx_usb->driver)
+ goto end_irq;
+
if (intr & INTR_SOF) {
/* Copy from Freescale BSP.
We must enable SOF intr and set CMDOVER.
}
}
+ if (intr & INTR_CFG_CHG) {
+ /* A workaround of serious IMX UDC bug.
+ Handling of CFG_CHG should be delayed for some time, because
+ IMX does not NACK the host when CFG_CHG interrupt is pending.
+ There is no time to handle current CFG_CHG
+ if next CFG_CHG or SETUP packed is send immediately.
+ We have to clear CFG_CHG, start the timer and
+ NACK the host by setting CTRL_CMDOVER
+ if it sends any SETUP packet.
+ When timer expires, handler is called to handle configuration
+ changes. While CFG_CHG is not handled (set_config=1),
+ we must NACK the host to every SETUP packed.
+ This delay prevents from going out of sync with host.
+ */
+ __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
+ imx_usb->set_config = 1;
+ mod_timer(&imx_usb->timer, jiffies + 5);
+ goto end_irq;
+ }
+
+ if (intr & INTR_WAKEUP) {
+ if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
+ && imx_usb->driver && imx_usb->driver->resume)
+ imx_usb->driver->resume(&imx_usb->gadget);
+ imx_usb->set_config = 0;
+ del_timer(&imx_usb->timer);
+ imx_usb->gadget.speed = USB_SPEED_FULL;
+ }
+
+ if (intr & INTR_SUSPEND) {
+ if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
+ && imx_usb->driver && imx_usb->driver->suspend)
+ imx_usb->driver->suspend(&imx_usb->gadget);
+ imx_usb->set_config = 0;
+ del_timer(&imx_usb->timer);
+ imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+ }
+
+ if (intr & INTR_RESET_START) {
+ __raw_writel(intr, imx_usb->base + USB_INTR);
+ udc_stop_activity(imx_usb, imx_usb->driver);
+ imx_usb->set_config = 0;
+ del_timer(&imx_usb->timer);
+ imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
+ }
+
+ if (intr & INTR_RESET_STOP)
+ imx_usb->gadget.speed = USB_SPEED_FULL;
+
end_irq:
__raw_writel(intr, imx_usb->base + USB_INTR);
return IRQ_HANDLED;
udc_stop_activity(imx_usb, driver);
imx_udc_disable(imx_usb);
+ del_timer(&imx_usb->timer);
driver->unbind(&imx_usb->gadget);
imx_usb->gadget.dev.driver = NULL;
usb_init_data(imx_usb);
imx_udc_init(imx_usb);
+ init_timer(&imx_usb->timer);
+ imx_usb->timer.function = handle_config;
+ imx_usb->timer.data = (unsigned long)imx_usb;
+
return 0;
fail3:
int i;
imx_udc_disable(imx_usb);
+ del_timer(&imx_usb->timer);
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
free_irq(imx_usb->usbd_int[i], imx_usb);