return 0;
}
+/* pre-generated data for generating the CRC based on the poly 0xAC9A. */
+static const u16 fm10k_crc_16b_table[256] = {
+ 0x0000, 0x7956, 0xF2AC, 0x8BFA, 0xBC6D, 0xC53B, 0x4EC1, 0x3797,
+ 0x21EF, 0x58B9, 0xD343, 0xAA15, 0x9D82, 0xE4D4, 0x6F2E, 0x1678,
+ 0x43DE, 0x3A88, 0xB172, 0xC824, 0xFFB3, 0x86E5, 0x0D1F, 0x7449,
+ 0x6231, 0x1B67, 0x909D, 0xE9CB, 0xDE5C, 0xA70A, 0x2CF0, 0x55A6,
+ 0x87BC, 0xFEEA, 0x7510, 0x0C46, 0x3BD1, 0x4287, 0xC97D, 0xB02B,
+ 0xA653, 0xDF05, 0x54FF, 0x2DA9, 0x1A3E, 0x6368, 0xE892, 0x91C4,
+ 0xC462, 0xBD34, 0x36CE, 0x4F98, 0x780F, 0x0159, 0x8AA3, 0xF3F5,
+ 0xE58D, 0x9CDB, 0x1721, 0x6E77, 0x59E0, 0x20B6, 0xAB4C, 0xD21A,
+ 0x564D, 0x2F1B, 0xA4E1, 0xDDB7, 0xEA20, 0x9376, 0x188C, 0x61DA,
+ 0x77A2, 0x0EF4, 0x850E, 0xFC58, 0xCBCF, 0xB299, 0x3963, 0x4035,
+ 0x1593, 0x6CC5, 0xE73F, 0x9E69, 0xA9FE, 0xD0A8, 0x5B52, 0x2204,
+ 0x347C, 0x4D2A, 0xC6D0, 0xBF86, 0x8811, 0xF147, 0x7ABD, 0x03EB,
+ 0xD1F1, 0xA8A7, 0x235D, 0x5A0B, 0x6D9C, 0x14CA, 0x9F30, 0xE666,
+ 0xF01E, 0x8948, 0x02B2, 0x7BE4, 0x4C73, 0x3525, 0xBEDF, 0xC789,
+ 0x922F, 0xEB79, 0x6083, 0x19D5, 0x2E42, 0x5714, 0xDCEE, 0xA5B8,
+ 0xB3C0, 0xCA96, 0x416C, 0x383A, 0x0FAD, 0x76FB, 0xFD01, 0x8457,
+ 0xAC9A, 0xD5CC, 0x5E36, 0x2760, 0x10F7, 0x69A1, 0xE25B, 0x9B0D,
+ 0x8D75, 0xF423, 0x7FD9, 0x068F, 0x3118, 0x484E, 0xC3B4, 0xBAE2,
+ 0xEF44, 0x9612, 0x1DE8, 0x64BE, 0x5329, 0x2A7F, 0xA185, 0xD8D3,
+ 0xCEAB, 0xB7FD, 0x3C07, 0x4551, 0x72C6, 0x0B90, 0x806A, 0xF93C,
+ 0x2B26, 0x5270, 0xD98A, 0xA0DC, 0x974B, 0xEE1D, 0x65E7, 0x1CB1,
+ 0x0AC9, 0x739F, 0xF865, 0x8133, 0xB6A4, 0xCFF2, 0x4408, 0x3D5E,
+ 0x68F8, 0x11AE, 0x9A54, 0xE302, 0xD495, 0xADC3, 0x2639, 0x5F6F,
+ 0x4917, 0x3041, 0xBBBB, 0xC2ED, 0xF57A, 0x8C2C, 0x07D6, 0x7E80,
+ 0xFAD7, 0x8381, 0x087B, 0x712D, 0x46BA, 0x3FEC, 0xB416, 0xCD40,
+ 0xDB38, 0xA26E, 0x2994, 0x50C2, 0x6755, 0x1E03, 0x95F9, 0xECAF,
+ 0xB909, 0xC05F, 0x4BA5, 0x32F3, 0x0564, 0x7C32, 0xF7C8, 0x8E9E,
+ 0x98E6, 0xE1B0, 0x6A4A, 0x131C, 0x248B, 0x5DDD, 0xD627, 0xAF71,
+ 0x7D6B, 0x043D, 0x8FC7, 0xF691, 0xC106, 0xB850, 0x33AA, 0x4AFC,
+ 0x5C84, 0x25D2, 0xAE28, 0xD77E, 0xE0E9, 0x99BF, 0x1245, 0x6B13,
+ 0x3EB5, 0x47E3, 0xCC19, 0xB54F, 0x82D8, 0xFB8E, 0x7074, 0x0922,
+ 0x1F5A, 0x660C, 0xEDF6, 0x94A0, 0xA337, 0xDA61, 0x519B, 0x28CD };
+
+/**
+ * fm10k_crc_16b - Generate a 16 bit CRC for a region of 16 bit data
+ * @data: pointer to data to process
+ * @seed: seed value for CRC
+ * @len: length measured in 16 bits words
+ *
+ * This function will generate a CRC based on the polynomial 0xAC9A and
+ * whatever value is stored in the seed variable. Note that this
+ * value inverts the local seed and the result in order to capture all
+ * leading and trailing zeros.
+ */
+static u16 fm10k_crc_16b(const u32 *data, u16 seed, u16 len)
+{
+ u32 result = seed;
+
+ while (len--) {
+ result ^= *(data++);
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+
+ if (!(len--))
+ break;
+
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ }
+
+ return (u16)result;
+}
+
+/**
+ * fm10k_fifo_crc - generate a CRC based off of FIFO data
+ * @fifo: pointer to FIFO
+ * @offset: offset point for start of FIFO
+ * @len: number of DWORDS words to process
+ * @seed: seed value for CRC
+ *
+ * This function generates a CRC for some region of the FIFO
+ **/
+static u16 fm10k_fifo_crc(struct fm10k_mbx_fifo *fifo, u16 offset,
+ u16 len, u16 seed)
+{
+ u32 *data = fifo->buffer + offset;
+
+ /* track when we should cross the end of the FIFO */
+ offset = fifo->size - offset;
+
+ /* if we are in 2 blocks process the end of the FIFO first */
+ if (offset < len) {
+ seed = fm10k_crc_16b(data, seed, offset * 2);
+ data = fifo->buffer;
+ len -= offset;
+ }
+
+ /* process any remaining bits */
+ return fm10k_crc_16b(data, seed, len * 2);
+}
+
+/**
+ * fm10k_mbx_update_local_crc - Update the local CRC for outgoing data
+ * @mbx: pointer to mailbox
+ * @head: head index provided by remote mailbox
+ *
+ * This function will generate the CRC for all data from the end of the
+ * last head update to the current one. It uses the result of the
+ * previous CRC as the seed for this update. The result is stored in
+ * mbx->local.
+ **/
+static void fm10k_mbx_update_local_crc(struct fm10k_mbx_info *mbx, u16 head)
+{
+ u16 len = mbx->tail_len - fm10k_mbx_index_len(mbx, head, mbx->tail);
+
+ /* determine the offset for the start of the region to be pulled */
+ head = fm10k_fifo_head_offset(&mbx->tx, mbx->pulled);
+
+ /* update local CRC to include all of the pulled data */
+ mbx->local = fm10k_fifo_crc(&mbx->tx, head, len, mbx->local);
+}
+
+/**
+ * fm10k_mbx_verify_remote_crc - Verify the CRC is correct for current data
+ * @mbx: pointer to mailbox
+ *
+ * This function will take all data that has been provided from the remote
+ * end and generate a CRC for it. This is stored in mbx->remote. The
+ * CRC for the header is then computed and if the result is non-zero this
+ * is an error and we signal an error dropping all data and resetting the
+ * connection.
+ */
+static s32 fm10k_mbx_verify_remote_crc(struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ u16 len = mbx->head_len;
+ u16 offset = fm10k_fifo_tail_offset(fifo, mbx->pushed) - len;
+ u16 crc;
+
+ /* update the remote CRC if new data has been received */
+ if (len)
+ mbx->remote = fm10k_fifo_crc(fifo, offset, len, mbx->remote);
+
+ /* process the full header as we have to validate the CRC */
+ crc = fm10k_crc_16b(&mbx->mbx_hdr, mbx->remote, 1);
+
+ /* notify other end if we have a problem */
+ return crc ? FM10K_MBX_ERR_CRC : 0;
+}
+
/**
* fm10k_mbx_rx_ready - Indicates that a message is ready in the Rx FIFO
* @mbx: pointer to mailbox
mbx->mbx_lock = 0;
}
+/**
+ * fm10k_mbx_create_connect_hdr - Generate a connect mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a connection mailbox header
+ **/
+static void fm10k_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx)
+{
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_CONNECT, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->rx.size - 1, CONNECT_SIZE);
+}
+
+/**
+ * fm10k_mbx_create_data_hdr - Generate a data mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a data mailbox header
+ **/
+static void fm10k_mbx_create_data_hdr(struct fm10k_mbx_info *mbx)
+{
+ u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DATA, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+ struct fm10k_mbx_fifo *fifo = &mbx->tx;
+ u16 crc;
+
+ if (mbx->tail_len)
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ /* generate CRC for data in flight and header */
+ crc = fm10k_fifo_crc(fifo, fm10k_fifo_head_offset(fifo, mbx->pulled),
+ mbx->tail_len, mbx->local);
+ crc = fm10k_crc_16b(&hdr, crc, 1);
+
+ /* load header to memory to be written */
+ mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC);
+}
+
+/**
+ * fm10k_mbx_create_disconnect_hdr - Generate a disconnect mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a disconnect mailbox header
+ **/
+static void fm10k_mbx_create_disconnect_hdr(struct fm10k_mbx_info *mbx)
+{
+ u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+ u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1);
+
+ mbx->mbx_lock |= FM10K_MBX_ACK;
+
+ /* load header to memory to be written */
+ mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC);
+}
+
+/**
+ * fm10k_mbx_create_error_msg - Generate a error message
+ * @mbx: pointer to mailbox
+ * @err: local error encountered
+ *
+ * This function will interpret the error provided by err, and based on
+ * that it may shift the message by 1 DWORD and then place an error header
+ * at the start of the message.
+ **/
+static void fm10k_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err)
+{
+ /* only generate an error message for these types */
+ switch (err) {
+ case FM10K_MBX_ERR_TAIL:
+ case FM10K_MBX_ERR_HEAD:
+ case FM10K_MBX_ERR_TYPE:
+ case FM10K_MBX_ERR_SIZE:
+ case FM10K_MBX_ERR_RSVD0:
+ case FM10K_MBX_ERR_CRC:
+ break;
+ default:
+ return;
+ }
+
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_ERROR, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(err, ERR_NO) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+}
+
+/**
+ * fm10k_mbx_validate_msg_hdr - Validate common fields in the message header
+ * @mbx: pointer to mailbox
+ * @msg: message array to read
+ *
+ * This function will parse up the fields in the mailbox header and return
+ * an error if the header contains any of a number of invalid configurations
+ * including unrecognized type, invalid route, or a malformed message.
+ **/
+static s32 fm10k_mbx_validate_msg_hdr(struct fm10k_mbx_info *mbx)
+{
+ u16 type, rsvd0, head, tail, size;
+ const u32 *hdr = &mbx->mbx_hdr;
+
+ type = FM10K_MSG_HDR_FIELD_GET(*hdr, TYPE);
+ rsvd0 = FM10K_MSG_HDR_FIELD_GET(*hdr, RSVD0);
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+ size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE);
+
+ if (rsvd0)
+ return FM10K_MBX_ERR_RSVD0;
+
+ switch (type) {
+ case FM10K_MSG_DISCONNECT:
+ /* validate that all data has been received */
+ if (tail != mbx->head)
+ return FM10K_MBX_ERR_TAIL;
+
+ /* fall through */
+ case FM10K_MSG_DATA:
+ /* validate that head is moving correctly */
+ if (!head || (head == FM10K_MSG_HDR_MASK(HEAD)))
+ return FM10K_MBX_ERR_HEAD;
+ if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len)
+ return FM10K_MBX_ERR_HEAD;
+
+ /* validate that tail is moving correctly */
+ if (!tail || (tail == FM10K_MSG_HDR_MASK(TAIL)))
+ return FM10K_MBX_ERR_TAIL;
+ if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len)
+ break;
+
+ return FM10K_MBX_ERR_TAIL;
+ case FM10K_MSG_CONNECT:
+ /* validate size is in range and is power of 2 mask */
+ if ((size < FM10K_VFMBX_MSG_MTU) || (size & (size + 1)))
+ return FM10K_MBX_ERR_SIZE;
+
+ /* fall through */
+ case FM10K_MSG_ERROR:
+ if (!head || (head == FM10K_MSG_HDR_MASK(HEAD)))
+ return FM10K_MBX_ERR_HEAD;
+ /* neither create nor error include a tail offset */
+ if (tail)
+ return FM10K_MBX_ERR_TAIL;
+
+ break;
+ default:
+ return FM10K_MBX_ERR_TYPE;
+ }
+
+ return 0;
+}
+
+/**
+ * fm10k_mbx_create_reply - Generate reply based on state and remote head
+ * @mbx: pointer to mailbox
+ * @head: acknowledgement number
+ *
+ * This function will generate an outgoing message based on the current
+ * mailbox state and the remote fifo head. It will return the length
+ * of the outgoing message excluding header on success, and a negative value
+ * on error.
+ **/
+static s32 fm10k_mbx_create_reply(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, u16 head)
+{
+ switch (mbx->state) {
+ case FM10K_STATE_OPEN:
+ case FM10K_STATE_DISCONNECT:
+ /* update our checksum for the outgoing data */
+ fm10k_mbx_update_local_crc(mbx, head);
+
+ /* as long as other end recognizes us keep sending data */
+ fm10k_mbx_pull_head(hw, mbx, head);
+
+ /* generate new header based on data */
+ if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN))
+ fm10k_mbx_create_data_hdr(mbx);
+ else
+ fm10k_mbx_create_disconnect_hdr(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* send disconnect even if we aren't connected */
+ fm10k_mbx_create_connect_hdr(mbx);
+ break;
+ case FM10K_STATE_CLOSED:
+ /* generate new header based on data */
+ fm10k_mbx_create_disconnect_hdr(mbx);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
/**
* fm10k_mbx_reset_work- Reset internal pointers for any pending work
* @mbx: pointer to mailbox
}
}
+/**
+ * fm10k_mbx_connect_reset - Reset following request for reset
+ * @mbx: pointer to mailbox
+ *
+ * This function resets the mailbox to either a disconnected state
+ * or a connect state depending on the current mailbox state
+ **/
+static void fm10k_mbx_connect_reset(struct fm10k_mbx_info *mbx)
+{
+ /* just do a quick resysnc to start of frame */
+ fm10k_mbx_reset_work(mbx);
+
+ /* reset CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* we cannot exit connect until the size is good */
+ if (mbx->state == FM10K_STATE_OPEN)
+ mbx->state = FM10K_STATE_CONNECT;
+ else
+ mbx->state = FM10K_STATE_CLOSED;
+}
+
+/**
+ * fm10k_mbx_process_connect - Process connect header
+ * @mbx: pointer to mailbox
+ * @msg: message array to process
+ *
+ * This function will read an incoming connect header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+static s32 fm10k_mbx_process_connect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 size, head;
+
+ /* we will need to pull all of the fields for verification */
+ size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ case FM10K_STATE_OPEN:
+ /* reset any in-progress work */
+ fm10k_mbx_connect_reset(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* we cannot exit connect until the size is good */
+ if (size > mbx->rx.size) {
+ mbx->max_size = mbx->rx.size - 1;
+ } else {
+ /* record the remote system requesting connection */
+ mbx->state = FM10K_STATE_OPEN;
+
+ fm10k_mbx_update_max_size(mbx, size);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* align our tail index to remote head index */
+ mbx->tail = head;
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_data - Process data header
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming data header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+static s32 fm10k_mbx_process_data(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head, tail;
+ s32 err;
+
+ /* we will need to pull all of the fields for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL);
+
+ /* if we are in connect just update our data and go */
+ if (mbx->state == FM10K_STATE_CONNECT) {
+ mbx->tail = head;
+ mbx->state = FM10K_STATE_OPEN;
+ }
+
+ /* abort on message size errors */
+ err = fm10k_mbx_push_tail(hw, mbx, tail);
+ if (err < 0)
+ return err;
+
+ /* verify the checksum on the incoming data */
+ err = fm10k_mbx_verify_remote_crc(mbx);
+ if (err)
+ return err;
+
+ /* process messages if we have received any */
+ fm10k_mbx_dequeue_rx(hw, mbx);
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_disconnect - Process disconnect header
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming disconnect header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+static s32 fm10k_mbx_process_disconnect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head, tail;
+ s32 err;
+
+ /* we will need to pull all of the fields for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL);
+
+ /* We should not be receiving disconnect if Rx is incomplete */
+ if (mbx->pushed)
+ return FM10K_MBX_ERR_TAIL;
+
+ /* we have already verified mbx->head == tail so we know this is 0 */
+ mbx->head_len = 0;
+
+ /* verify the checksum on the incoming header is correct */
+ err = fm10k_mbx_verify_remote_crc(mbx);
+ if (err)
+ return err;
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ case FM10K_STATE_OPEN:
+ /* state doesn't change if we still have work to do */
+ if (!fm10k_mbx_tx_complete(mbx))
+ break;
+
+ /* verify the head indicates we completed all transmits */
+ if (head != mbx->tail)
+ return FM10K_MBX_ERR_HEAD;
+
+ /* reset any in-progress work */
+ fm10k_mbx_connect_reset(mbx);
+ break;
+ default:
+ break;
+ }
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_error - Process error header
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming error header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+static s32 fm10k_mbx_process_error(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ s32 err_no;
+ u16 head;
+
+ /* we will need to pull all of the fields for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+
+ /* we only have lower 10 bits of error number os add upper bits */
+ err_no = FM10K_MSG_HDR_FIELD_GET(*hdr, ERR_NO);
+ err_no |= ~FM10K_MSG_HDR_MASK(ERR_NO);
+
+ switch (mbx->state) {
+ case FM10K_STATE_OPEN:
+ case FM10K_STATE_DISCONNECT:
+ /* flush any uncompleted work */
+ fm10k_mbx_reset_work(mbx);
+
+ /* reset CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* reset tail index and size to prepare for reconnect */
+ mbx->tail = head;
+
+ /* if open then reset max_size and go back to connect */
+ if (mbx->state == FM10K_STATE_OPEN) {
+ mbx->state = FM10K_STATE_CONNECT;
+ break;
+ }
+
+ /* send a connect message to get data flowing again */
+ fm10k_mbx_create_connect_hdr(mbx);
+ return 0;
+ default:
+ break;
+ }
+
+ return fm10k_mbx_create_reply(hw, mbx, mbx->tail);
+}
+
+/**
+ * fm10k_mbx_process - Process mailbox interrupt
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will process incoming mailbox events and generate mailbox
+ * replies. It will return a value indicating the number of DWORDs
+ * transmitted excluding header on success or a negative value on error.
+ **/
+static s32 fm10k_mbx_process(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ s32 err;
+
+ /* we do not read mailbox if closed */
+ if (mbx->state == FM10K_STATE_CLOSED)
+ return 0;
+
+ /* copy data from mailbox */
+ err = fm10k_mbx_read(hw, mbx);
+ if (err)
+ return err;
+
+ /* validate type, source, and destination */
+ err = fm10k_mbx_validate_msg_hdr(mbx);
+ if (err < 0)
+ goto msg_err;
+
+ switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, TYPE)) {
+ case FM10K_MSG_CONNECT:
+ err = fm10k_mbx_process_connect(hw, mbx);
+ break;
+ case FM10K_MSG_DATA:
+ err = fm10k_mbx_process_data(hw, mbx);
+ break;
+ case FM10K_MSG_DISCONNECT:
+ err = fm10k_mbx_process_disconnect(hw, mbx);
+ break;
+ case FM10K_MSG_ERROR:
+ err = fm10k_mbx_process_error(hw, mbx);
+ break;
+ default:
+ err = FM10K_MBX_ERR_TYPE;
+ break;
+ }
+
+msg_err:
+ /* notify partner of errors on our end */
+ if (err < 0)
+ fm10k_mbx_create_error_msg(mbx, err);
+
+ /* copy data from mailbox */
+ fm10k_mbx_write(hw, mbx);
+
+ return err;
+}
+
+/**
+ * fm10k_mbx_disconnect - Shutdown mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will shut down the mailbox. It places the mailbox first
+ * in the disconnect state, it then allows up to a predefined timeout for
+ * the mailbox to transition to close on its own. If this does not occur
+ * then the mailbox will be forced into the closed state.
+ *
+ * Any mailbox transactions not completed before calling this function
+ * are not guaranteed to complete and may be dropped.
+ **/
+static void fm10k_mbx_disconnect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0;
+
+ /* Place mbx in ready to disconnect state */
+ mbx->state = FM10K_STATE_DISCONNECT;
+
+ /* trigger interrupt to start shutdown process */
+ fm10k_write_reg(hw, mbx->mbx_reg, FM10K_MBX_REQ |
+ FM10K_MBX_INTERRUPT_DISABLE);
+ do {
+ udelay(FM10K_MBX_POLL_DELAY);
+ mbx->ops.process(hw, mbx);
+ timeout -= FM10K_MBX_POLL_DELAY;
+ } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED));
+
+ /* in case we didn't close just force the mailbox into shutdown */
+ fm10k_mbx_connect_reset(mbx);
+ fm10k_mbx_update_max_size(mbx, 0);
+
+ fm10k_write_reg(hw, mbx->mbmem_reg, 0);
+}
+
+/**
+ * fm10k_mbx_connect - Start mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will initiate a mailbox connection. It will populate the
+ * mailbox with a broadcast connect message and then initialize the lock.
+ * This is safe since the connect message is a single DWORD so the mailbox
+ * transaction is guaranteed to be atomic.
+ *
+ * This function will return an error if the mailbox has not been initiated
+ * or is currently in use.
+ **/
+static s32 fm10k_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
+{
+ /* we cannot connect an uninitialized mailbox */
+ if (!mbx->rx.buffer)
+ return FM10K_MBX_ERR_NO_SPACE;
+
+ /* we cannot connect an already connected mailbox */
+ if (mbx->state != FM10K_STATE_CLOSED)
+ return FM10K_MBX_ERR_BUSY;
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = FM10K_MBX_INIT_TIMEOUT;
+
+ /* Place mbx in ready to connect state */
+ mbx->state = FM10K_STATE_CONNECT;
+
+ /* initialize header of remote mailbox */
+ fm10k_mbx_create_disconnect_hdr(mbx);
+ fm10k_write_reg(hw, mbx->mbmem_reg ^ mbx->mbmem_len, mbx->mbx_hdr);
+
+ /* enable interrupt and notify other party of new message */
+ mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT |
+ FM10K_MBX_INTERRUPT_ENABLE;
+
+ /* generate and load connect header into mailbox */
+ fm10k_mbx_create_connect_hdr(mbx);
+ fm10k_mbx_write(hw, mbx);
+
+ return 0;
+}
+
/**
* fm10k_mbx_validate_handlers - Validate layout of message parsing data
* @msg_data: handlers for mailbox events
return 0;
}
+/**
+ * fm10k_pfvf_mbx_init - Initialize mailbox memory for PF/VF mailbox
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @msg_data: handlers for mailbox events
+ * @id: ID reference for PF as it supports up to 64 PF/VF mailboxes
+ *
+ * This function initializes the mailbox for use. It will split the
+ * buffer provided an use that th populate both the Tx and Rx FIFO by
+ * evenly splitting it. In order to allow for easy masking of head/tail
+ * the value reported in size must be a power of 2 and is reported in
+ * DWORDs, not bytes. Any invalid values will cause the mailbox to return
+ * error.
+ **/
+s32 fm10k_pfvf_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx,
+ const struct fm10k_msg_data *msg_data, u8 id)
+{
+ /* initialize registers */
+ switch (hw->mac.type) {
+ case fm10k_mac_pf:
+ /* there are only 64 VF <-> PF mailboxes */
+ if (id < 64) {
+ mbx->mbx_reg = FM10K_MBX(id);
+ mbx->mbmem_reg = FM10K_MBMEM_VF(id, 0);
+ break;
+ }
+ /* fallthough */
+ default:
+ return FM10K_MBX_ERR_NO_MBX;
+ }
+
+ /* start out in closed state */
+ mbx->state = FM10K_STATE_CLOSED;
+
+ /* validate layout of handlers before assigning them */
+ if (fm10k_mbx_validate_handlers(msg_data))
+ return FM10K_ERR_PARAM;
+
+ /* initialize the message handlers */
+ mbx->msg_data = msg_data;
+
+ /* start mailbox as timed out and let the reset_hw call
+ * set the timeout value to begin communications
+ */
+ mbx->timeout = 0;
+ mbx->udelay = FM10K_MBX_INIT_DELAY;
+
+ /* initalize tail and head */
+ mbx->tail = 1;
+ mbx->head = 1;
+
+ /* initialize CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* Split buffer for use by Tx/Rx FIFOs */
+ mbx->max_size = FM10K_MBX_MSG_MAX_SIZE;
+ mbx->mbmem_len = FM10K_VFMBMEM_VF_XOR;
+
+ /* initialize the FIFOs, sizes are in 4 byte increments */
+ fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE);
+ fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE],
+ FM10K_MBX_RX_BUFFER_SIZE);
+
+ /* initialize function pointers */
+ mbx->ops.connect = fm10k_mbx_connect;
+ mbx->ops.disconnect = fm10k_mbx_disconnect;
+ mbx->ops.rx_ready = fm10k_mbx_rx_ready;
+ mbx->ops.tx_ready = fm10k_mbx_tx_ready;
+ mbx->ops.tx_complete = fm10k_mbx_tx_complete;
+ mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx;
+ mbx->ops.process = fm10k_mbx_process;
+ mbx->ops.register_handlers = fm10k_mbx_register_handlers;
+
+ return 0;
+}
+
/**
* fm10k_sm_mbx_create_data_hdr - Generate a mailbox header for local FIFO
* @mbx: pointer to mailbox
projects / mirror_ubuntu-disco-kernel.git / commitdiff