mfd: arizona: Add TST_CAP bits for headphone detection

On wm5110/8280 some additional settings are required to get accurate
measurements at the top end of the headphone detection range. This patch
adds the bits required for this.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index aae17d6997b1f71380a2a4e504ca4696d7c1fef6..28f2ae30507a2f8dd5a7905c858ff4746a6c5676 100644 (file)
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -1912,6 +1912,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
        case ARIZONA_HP1_SHORT_CIRCUIT_CTRL:
        case ARIZONA_HP2_SHORT_CIRCUIT_CTRL:
        case ARIZONA_HP3_SHORT_CIRCUIT_CTRL:
+       case ARIZONA_HP_TEST_CTRL_1:
        case ARIZONA_AIF1_BCLK_CTRL:
        case ARIZONA_AIF1_TX_PIN_CTRL:
        case ARIZONA_AIF1_RX_PIN_CTRL:
@@ -2857,6 +2858,7 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
        case ARIZONA_INPUT_ENABLES_STATUS:
        case ARIZONA_OUTPUT_STATUS_1:
        case ARIZONA_RAW_OUTPUT_STATUS_1:
+       case ARIZONA_HP_TEST_CTRL_1:
        case ARIZONA_SLIMBUS_RX_PORT_STATUS:
        case ARIZONA_SLIMBUS_TX_PORT_STATUS:
        case ARIZONA_INTERRUPT_STATUS_1:

diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index ab219c9b0b08773326b53082073b5738ff78a97d..c7c11c900196c59f22db80e7a3c202b2effcfa47 100644 (file)
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -242,6 +242,7 @@
 #define ARIZONA_HP1_SHORT_CIRCUIT_CTRL           0x4A0
 #define ARIZONA_HP2_SHORT_CIRCUIT_CTRL           0x4A1
 #define ARIZONA_HP3_SHORT_CIRCUIT_CTRL           0x4A2
+#define ARIZONA_HP_TEST_CTRL_1                   0x4A4
 #define ARIZONA_SPK_CTRL_2                       0x4B5
 #define ARIZONA_SPK_CTRL_3                       0x4B6
 #define ARIZONA_DAC_COMP_1                       0x4DC
@@ -3701,6 +3702,13 @@
 #define ARIZONA_HP3_SC_ENA_SHIFT                     12  /* HP3_SC_ENA */
 #define ARIZONA_HP3_SC_ENA_WIDTH                      1  /* HP3_SC_ENA */
 
+/*
+ * R1188 (0x4A4) HP Test Ctrl 1
+ */
+#define ARIZONA_HP1_TST_CAP_SEL_MASK             0x0003  /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_SHIFT                 0  /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_WIDTH                 2  /* HP1_TST_CAP_SEL - [1:0] */
+
 /*
  * R1244 (0x4DC) - DAC comp 1
  */