ARM: shmobile: r8a7790/lager dts: Add DVFS parameters into cpu0 node for r8a7790

Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.

- voltage-tolerance = 1%
  It reflects the tolerance for the CPU voltage defined inside the OPP
  table. Due to the lack of proper OPP definition, use an arbitrary safe
  value.
- clock-latency = 300 us
  Approximate worst-case latency to do a full DVFS transition for every
  OPPs. Due to the lack of HW information, use an arbitrary safe value.
  Note: The term transition-latency will be more accurate to define this
  value since the clock transition latency is not the only parameter that
  will define the overall DVFS transition.
- operating-points = < kHz - uV >
  List of 6 operating points. All of them are using the same voltage
  since the valid Vmin voltage is not documented in the HW spec.
- clocks
  phandle to the CPU clock source. This clock source is used for all the
  4 CortexA15 located inside the same cluster.

Signed-off-by: Benoit Cousson <bcousson+renesas@baylibre.com>
[gaku.inami.xw@bp.renesas.com: Change the setting of OPPs for ES2.0]
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 6472cf0914e27298f7b5f5f7283b96daa9375dbb..cc65e3f96f08a9f45bf5cbcde7489a5556bb68ba 100644 (file)
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -338,3 +338,7 @@
                regulator-always-on;
        };
 };
+
+&cpu0 {
+       cpu0-supply = <&vdd_dvfs>;
+};

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e2c7d6df5be4c053027df6a395e9f180c6a3e91a..e990d3c4fe62340a291fe1b910dd7b0d69112add 100644 (file)
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -44,6 +44,17 @@
                        compatible = "arm,cortex-a15";
                        reg = <0>;
                        clock-frequency = <1300000000>;
+                       voltage-tolerance = <1>; /* 1% */
+                       clocks = <&cpg_clocks R8A7790_CLK_Z>;
+                       clock-latency = <300000>; /* 300 us */
+
+                       /* kHz - uV - OPPs unknown yet */
+                       operating-points = <1400000 1000000>,
+                                          <1225000 1000000>,
+                                          <1050000 1000000>,
+                                          < 875000 1000000>,
+                                          < 700000 1000000>,
+                                          < 350000 1000000>;
                };
 
                cpu1: cpu@1 {