arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Add QUP SE instances configuration for sc7180.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-14-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index d8206d1b5896f704d1933eeb1f8622204e8e805b..189254f5ae9572fbf1eb1098bd22e23ff440cb87 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -17,6 +17,7 @@
        compatible = "qcom,sc7180-idp";
 
        aliases {
+               hsuart0 = &uart3;
                serial0 = &uart8;
        };
 
@@ -231,16 +232,100 @@
        };
 };
 
+&qupv3_id_0 {
+       status = "okay";
+};
+
 &qupv3_id_1 {
        status = "okay";
 };
 
+&uart3 {
+       status = "okay";
+};
+
 &uart8 {
        status = "okay";
 };
 
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
+&qup_i2c2_default {
+       pinconf {
+               pins = "gpio15", "gpio16";
+               drive-strength = <2>;
+
+               /* Has external pullup */
+               bias-disable;
+       };
+};
+
+&qup_i2c4_default {
+       pinconf {
+               pins = "gpio115", "gpio116";
+               drive-strength = <2>;
+
+               /* Has external pullup */
+               bias-disable;
+       };
+};
+
+&qup_i2c7_default {
+       pinconf {
+               pins = "gpio6", "gpio7";
+               drive-strength = <2>;
+               bias-disable;
+       };
+};
+
+&qup_i2c9_default {
+       pinconf {
+               pins = "gpio46", "gpio47";
+               drive-strength = <2>;
+
+               /* Has external pullup */
+               bias-disable;
+       };
+};
+
+&qup_uart3_default {
+       pinconf-cts {
+               /*
+                * Configure a pull-down on 38 (CTS) to match the pull of
+                * the Bluetooth module.
+                */
+               pins = "gpio38";
+               bias-pull-down;
+               output-high;
+       };
+
+       pinconf-rts {
+               /* We'll drive 39 (RTS), so no pull */
+               pins = "gpio39";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       pinconf-tx {
+               /* We'll drive 40 (TX), so no pull */
+               pins = "gpio40";
+               drive-strength = <2>;
+               bias-disable;
+               output-high;
+       };
+
+       pinconf-rx {
+               /*
+                * Configure a pull-up on 41 (RX). This is needed to avoid
+                * garbage data when the TX pin of the Bluetooth module is
+                * in tri-state (module powered off or not driving the
+                * signal yet).
+                */
+               pins = "gpio41";
+               bias-pull-up;
+       };
+};
+
 &qup_uart8_default {
        pinconf-tx {
                pins = "gpio44";
@@ -254,3 +339,64 @@
                bias-pull-up;
        };
 };
+
+&qup_spi0_default {
+       pinconf {
+               pins = "gpio34", "gpio35", "gpio36", "gpio37";
+               drive-strength = <2>;
+               bias-disable;
+       };
+};
+
+&qup_spi6_default {
+       pinconf {
+               pins = "gpio59", "gpio60", "gpio61", "gpio62";
+               drive-strength = <2>;
+               bias-disable;
+       };
+};
+
+&qup_spi10_default {
+       pinconf {
+               pins = "gpio86", "gpio87", "gpio88", "gpio89";
+               drive-strength = <2>;
+               bias-disable;
+       };
+};
+
+&qspi {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&qspi_cs0 {
+               pinconf {
+                       pins = "gpio68";
+                       bias-disable;
+               };
+};
+
+&qspi_clk {
+               pinconf {
+                       pins = "gpio63";
+                       bias-disable;
+               };
+};
+
+&qspi_data01 {
+               pinconf {
+                       pins = "gpio64", "gpio65";
+
+                       /* High-Z when no transfers; nice to park the lines */
+                       bias-pull-up;
+               };
+};

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e1d6278d85f794468f0b156262b109af78bfa7cf..666e9b92c7add07683f7f671ef11d1bd6edc787a 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -182,6 +182,214 @@
                        #power-domain-cells = <1>;
                };
 
+               qupv3_id_0: geniqup@8c0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0 0x008c0000 0 0x6000>;
+                       clock-names = "m-ahb", "s-ahb";
+                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       status = "disabled";
+
+                       i2c0: i2c@880000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00880000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c0_default>;
+                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi0: spi@880000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00880000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi0_default>;
+                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart0: serial@880000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00880000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart0_default>;
+                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@884000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00884000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c1_default>;
+                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi1: spi@884000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00884000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi1_default>;
+                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart1: serial@884000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00884000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart1_default>;
+                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c2: i2c@888000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00888000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c2_default>;
+                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart2: serial@888000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00888000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart2_default>;
+                               interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c3: i2c@88c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x0088c000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c3_default>;
+                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi3: spi@88c000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x0088c000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi3_default>;
+                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart3: serial@88c000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x0088c000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart3_default>;
+                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c4: i2c@890000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00890000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c4_default>;
+                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart4: serial@890000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00890000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart4_default>;
+                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c5: i2c@894000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00894000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c5_default>;
+                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi5: spi@894000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00894000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi5_default>;
+                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart5: serial@894000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00894000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart5_default>;
+                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+               };
+
                qupv3_id_1: geniqup@ac0000 {
                        compatible = "qcom,geni-se-qup";
                        reg = <0 0x00ac0000 0 0x6000>;
@@ -193,6 +401,93 @@
                        ranges;
                        status = "disabled";
 
+                       i2c6: i2c@a80000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a80000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c6_default>;
+                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi6: spi@a80000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00a80000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi6_default>;
+                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart6: serial@a80000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00a80000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart6_default>;
+                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c7: i2c@a84000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a84000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c7_default>;
+                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart7: serial@a84000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00a84000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart7_default>;
+                               interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c8: i2c@a88000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a88000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c8_default>;
+                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi8: spi@a88000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00a88000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi8_default>;
+                               interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
                        uart8: serial@a88000 {
                                compatible = "qcom,geni-debug-uart";
                                reg = <0 0x00a88000 0 0x4000>;
@@ -203,6 +498,104 @@
                                interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
                                status = "disabled";
                        };
+
+                       i2c9: i2c@a8c000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a8c000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c9_default>;
+                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart9: serial@a8c000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00a8c000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart9_default>;
+                               interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c10: i2c@a90000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a90000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c10_default>;
+                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi10: spi@a90000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00a90000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi10_default>;
+                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart10: serial@a90000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00a90000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart10_default>;
+                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
+
+                       i2c11: i2c@a94000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00a94000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_i2c11_default>;
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       spi11: spi@a94000 {
+                               compatible = "qcom,geni-spi";
+                               reg = <0 0x00a94000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_spi11_default>;
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       uart11: serial@a94000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00a94000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&qup_uart11_default>;
+                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               status = "disabled";
+                       };
                };
 
                pdc: interrupt-controller@b220000 {
@@ -228,12 +621,294 @@
                        #interrupt-cells = <2>;
                        gpio-ranges = <&tlmm 0 0 120>;
 
+                       qspi_clk: qspi-clk {
+                               pinmux {
+                                       pins = "gpio63";
+                                       function = "qspi_clk";
+                               };
+                       };
+
+                       qspi_cs0: qspi-cs0 {
+                               pinmux {
+                                       pins = "gpio68";
+                                       function = "qspi_cs";
+                               };
+                       };
+
+                       qspi_cs1: qspi-cs1 {
+                               pinmux {
+                                       pins = "gpio72";
+                                       function = "qspi_cs";
+                               };
+                       };
+
+                       qspi_data01: qspi-data01 {
+                               pinmux-data {
+                                       pins = "gpio64", "gpio65";
+                                       function = "qspi_data";
+                               };
+                       };
+
+                       qspi_data12: qspi-data12 {
+                               pinmux-data {
+                                       pins = "gpio66", "gpio67";
+                                       function = "qspi_data";
+                               };
+                       };
+
+                       qup_i2c0_default: qup-i2c0-default {
+                               pinmux {
+                                       pins = "gpio34", "gpio35";
+                                       function = "qup00";
+                               };
+                       };
+
+                       qup_i2c1_default: qup-i2c1-default {
+                               pinmux {
+                                       pins = "gpio0", "gpio1";
+                                       function = "qup01";
+                               };
+                       };
+
+                       qup_i2c2_default: qup-i2c2-default {
+                               pinmux {
+                                       pins = "gpio15", "gpio16";
+                                       function = "qup02";
+                               };
+                       };
+
+                       qup_i2c3_default: qup-i2c3-default {
+                               pinmux {
+                                       pins = "gpio38", "gpio39";
+                                       function = "qup03";
+                               };
+                       };
+
+                       qup_i2c4_default: qup-i2c4-default {
+                               pinmux {
+                                       pins = "gpio115", "gpio116";
+                                       function = "qup04";
+                               };
+                       };
+
+                       qup_i2c5_default: qup-i2c5-default {
+                               pinmux {
+                                       pins = "gpio25", "gpio26";
+                                       function = "qup05";
+                               };
+                       };
+
+                       qup_i2c6_default: qup-i2c6-default {
+                               pinmux {
+                                       pins = "gpio59", "gpio60";
+                                       function = "qup10";
+                               };
+                       };
+
+                       qup_i2c7_default: qup-i2c7-default {
+                               pinmux {
+                                       pins = "gpio6", "gpio7";
+                                       function = "qup11";
+                               };
+                       };
+
+                       qup_i2c8_default: qup-i2c8-default {
+                               pinmux {
+                                       pins = "gpio42", "gpio43";
+                                       function = "qup12";
+                               };
+                       };
+
+                       qup_i2c9_default: qup-i2c9-default {
+                               pinmux {
+                                       pins = "gpio46", "gpio47";
+                                       function = "qup13";
+                               };
+                       };
+
+                       qup_i2c10_default: qup-i2c10-default {
+                               pinmux {
+                                       pins = "gpio86", "gpio87";
+                                       function = "qup14";
+                               };
+                       };
+
+                       qup_i2c11_default: qup-i2c11-default {
+                               pinmux {
+                                       pins = "gpio53", "gpio54";
+                                       function = "qup15";
+                               };
+                       };
+
+                       qup_spi0_default: qup-spi0-default {
+                               pinmux {
+                                       pins = "gpio34", "gpio35",
+                                              "gpio36", "gpio37";
+                                       function = "qup00";
+                               };
+                       };
+
+                       qup_spi1_default: qup-spi1-default {
+                               pinmux {
+                                       pins = "gpio0", "gpio1",
+                                              "gpio2", "gpio3",
+                                              "gpio12", "gpio94";
+                                       function = "qup01";
+                               };
+                       };
+
+                       qup_spi3_default: qup-spi3-default {
+                               pinmux {
+                                       pins = "gpio38", "gpio39",
+                                              "gpio40", "gpio41";
+                                       function = "qup03";
+                               };
+                       };
+
+                       qup_spi5_default: qup-spi5-default {
+                               pinmux {
+                                       pins = "gpio25", "gpio26",
+                                              "gpio27", "gpio28";
+                                       function = "qup05";
+                               };
+                       };
+
+                       qup_spi6_default: qup-spi6-default {
+                               pinmux {
+                                       pins = "gpio59", "gpio60",
+                                              "gpio61", "gpio62",
+                                              "gpio68", "gpio72";
+                                       function = "qup10";
+                               };
+                       };
+
+                       qup_spi8_default: qup-spi8-default {
+                               pinmux {
+                                       pins = "gpio42", "gpio43",
+                                              "gpio44", "gpio45";
+                                       function = "qup12";
+                               };
+                       };
+
+                       qup_spi10_default: qup-spi10-default {
+                               pinmux {
+                                       pins = "gpio86", "gpio87",
+                                              "gpio88", "gpio89",
+                                              "gpio90", "gpio91";
+                                       function = "qup14";
+                               };
+                       };
+
+                       qup_spi11_default: qup-spi11-default {
+                               pinmux {
+                                       pins = "gpio53", "gpio54",
+                                              "gpio55", "gpio56";
+                                       function = "qup15";
+                               };
+                       };
+
+                       qup_uart0_default: qup-uart0-default {
+                               pinmux {
+                                       pins = "gpio34", "gpio35",
+                                              "gpio36", "gpio37";
+                                       function = "qup00";
+                               };
+                       };
+
+                       qup_uart1_default: qup-uart1-default {
+                               pinmux {
+                                       pins = "gpio0", "gpio1",
+                                              "gpio2", "gpio3";
+                                       function = "qup01";
+                               };
+                       };
+
+                       qup_uart2_default: qup-uart2-default {
+                               pinmux {
+                                       pins = "gpio15", "gpio16";
+                                       function = "qup02";
+                               };
+                       };
+
+                       qup_uart3_default: qup-uart3-default {
+                               pinmux {
+                                       pins = "gpio38", "gpio39",
+                                              "gpio40", "gpio41";
+                                       function = "qup03";
+                               };
+                       };
+
+                       qup_uart4_default: qup-uart4-default {
+                               pinmux {
+                                       pins = "gpio115", "gpio116";
+                                       function = "qup04";
+                               };
+                       };
+
+                       qup_uart5_default: qup-uart5-default {
+                               pinmux {
+                                       pins = "gpio25", "gpio26",
+                                              "gpio27", "gpio28";
+                                       function = "qup05";
+                               };
+                       };
+
+                       qup_uart6_default: qup-uart6-default {
+                               pinmux {
+                                       pins = "gpio59", "gpio60",
+                                              "gpio61", "gpio62";
+                                       function = "qup10";
+                               };
+                       };
+
+                       qup_uart7_default: qup-uart7-default {
+                               pinmux {
+                                       pins = "gpio6", "gpio7";
+                                       function = "qup11";
+                               };
+                       };
+
                        qup_uart8_default: qup-uart8-default {
                                pinmux {
                                        pins = "gpio44", "gpio45";
                                        function = "qup12";
                                };
                        };
+
+                       qup_uart9_default: qup-uart9-default {
+                               pinmux {
+                                       pins = "gpio46", "gpio47";
+                                       function = "qup13";
+                               };
+                       };
+
+                       qup_uart10_default: qup-uart10-default {
+                               pinmux {
+                                       pins = "gpio86", "gpio87",
+                                              "gpio88", "gpio89";
+                                       function = "qup14";
+                               };
+                       };
+
+                       qup_uart11_default: qup-uart11-default {
+                               pinmux {
+                                       pins = "gpio53", "gpio54",
+                                              "gpio55", "gpio56";
+                                       function = "qup15";
+                               };
+                       };
+               };
+
+               qspi: spi@88dc000 {
+                       compatible = "qcom,qspi-v1";
+                       reg = <0 0x088dc000 0 0x600>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                                <&gcc GCC_QSPI_CORE_CLK>;
+                       clock-names = "iface", "core";
+                       status = "disabled";
                };
 
                spmi_bus: spmi@c440000 {