ARM: dts: am335x-wega: Use AM33XX_IOPAD pinmux macro

Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 2cecb3951e1bbae11e3fb22fea9bc2c95613fb7d..282f6d4b27bce4a3308e9ca6d5666e60de1c00ca 100644 (file)
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -28,8 +28,8 @@
 &am33xx_pinmux {
        dcan1_pins: pinmux_dcan1 {
                pinctrl-single,pins = <
-                       0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-                       0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+                       AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+                       AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
                >;
        };
 };
@@ -44,20 +44,20 @@
 &am33xx_pinmux {
        ethernet1_pins: pinmux_ethernet1 {
                pinctrl-single,pins = <
-                       0x40 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a0.mii2_txen */
-                       0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a1.mii2_rxdv */
-                       0x48 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a2.mii2_txd3 */
-                       0x4c (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a3.mii2_txd2 */
-                       0x50 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a4.mii2_txd1 */
-                       0x54 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a5.mii2_txd0 */
-                       0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a6.mii2_txclk */
-                       0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a7.mii2_rxclk */
-                       0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a8.mii2_rxd3 */
-                       0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a9.mii2_rxd2 */
-                       0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a10.mii2_rxd1 */
-                       0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a11.mii2_rxd0 */
-                       0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_wpn.mii2_rxerr */
-                       0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_ben1.mii2_col */
+                       AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)             /* gpmc_a0.mii2_txen */
+                       AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a1.mii2_rxdv */
+                       AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)             /* gpmc_a2.mii2_txd3 */
+                       AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)             /* gpmc_a3.mii2_txd2 */
+                       AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)             /* gpmc_a4.mii2_txd1 */
+                       AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)             /* gpmc_a5.mii2_txd0 */
+                       AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a6.mii2_txclk */
+                       AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a7.mii2_rxclk */
+                       AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a8.mii2_rxd3 */
+                       AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a9.mii2_rxd2 */
+                       AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a10.mii2_rxd1 */
+                       AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_a11.mii2_rxd0 */
+                       AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_wpn.mii2_rxerr */
+                       AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)     /* gpmc_ben1.mii2_col */
                >;
        };
 };
@@ -79,13 +79,13 @@
 &am33xx_pinmux {
        mmc1_pins: pinmux_mmc1 {
                pinctrl-single,pins = <
-                       0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat3.mmc0_dat3 */
-                       0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat2.mmc0_dat2 */
-                       0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat1.mmc0_dat1 */
-                       0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat0.mmc0_dat0 */
-                       0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_clk.mmc0_clk */
-                       0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_cmd.mmc0_cmd */
-                       0x160 (PIN_INPUT_PULLUP | MUX_MODE7)    /* spi0_cs1.mmc0_sdcd */
+                       AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat3.mmc0_dat3 */
+                       AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat2.mmc0_dat2 */
+                       AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat1.mmc0_dat1 */
+                       AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat0.mmc0_dat0 */
+                       AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_clk.mmc0_clk */
+                       AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_cmd.mmc0_cmd */
+                       AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)       /* spi0_cs1.mmc0_sdcd */
                >;
        };
 };
@@ -103,17 +103,17 @@
 &am33xx_pinmux {
        uart0_pins: pinmux_uart0 {
                pinctrl-single,pins = <
-                       0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-                       0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+                       AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+                       AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
                >;
        };
 
        uart1_pins: pinmux_uart1_pins {
                pinctrl-single,pins = <
-                       0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
-                       0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
-                       0x178 (PIN_INPUT | MUX_MODE0)           /* uart1_ctsn.uart1_ctsn */
-                       0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)         /* uart1_rtsn.uart1_rtsn */
+                       AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart1_rxd.uart1_rxd */
+                       AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_txd.uart1_txd */
+                       AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)              /* uart1_ctsn.uart1_ctsn */
+                       AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_rtsn.uart1_rtsn */
                >;
        };
 };