/* restore regular registers */
for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
- /* this regs depends on the others */
+ /* These regs should restore in particular order */
if (reg == SGTL5000_CHIP_ANA_POWER ||
reg == SGTL5000_CHIP_CLK_CTRL ||
reg == SGTL5000_CHIP_LINREG_CTRL ||
reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
- reg == SGTL5000_CHIP_CLK_CTRL)
+ reg == SGTL5000_CHIP_REF_CTRL)
continue;
snd_soc_write(codec, reg, cache[reg]);
snd_soc_write(codec, reg, cache[reg]);
/*
- * restore power and other regs according
- * to set_power() and set_clock()
+ * restore these regs according to the power setting sequence in
+ * sgtl5000_set_power_regs() and clock setting sequence in
+ * sgtl5000_set_clock().
+ *
+ * The order of restore is:
+ * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
+ * SGTL5000_CHIP_ANA_POWER PLL bits set
+ * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
+ * SGTL5000_CHIP_ANA_POWER LINREG_D restored
+ * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
+ * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
*/
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
cache[SGTL5000_CHIP_LINREG_CTRL]);