/**
* vsp1_du_setup_lif - Setup the output part of the VSP pipeline
* @dev: the VSP device
- * @width: output frame width in pixels
- * @height: output frame height in pixels
+ * @cfg: the LIF configuration
*
- * Configure the output part of VSP DRM pipeline for the given frame @width and
- * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
- * pads, and the LIF sink pad.
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
+ * and source pads, and the LIF sink pad.
*
* As the media bus code on the BRU source pad is conditioned by the
* configuration of the BRU sink 0 pad, we also set up the formats on all BRU
*
* Return 0 on success or a negative error code on failure.
*/
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
- unsigned int height)
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
{
struct vsp1_device *vsp1 = dev_get_drvdata(dev);
struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
unsigned int i;
int ret;
- dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
- __func__, width, height);
-
- if (width == 0 || height == 0) {
- /* Zero width or height means the CRTC is being disabled, stop
+ if (!cfg) {
+ /* NULL configuration means the CRTC is being disabled, stop
* the pipeline and turn the light off.
*/
ret = vsp1_pipeline_stop(pipe);
return 0;
}
+ dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+ __func__, cfg->width, cfg->height);
+
/* Configure the format at the BRU sinks and propagate it through the
* pipeline.
*/
for (i = 0; i < bru->entity.source_pad; ++i) {
format.pad = i;
- format.format.width = width;
- format.format.height = height;
+ format.format.width = cfg->width;
+ format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
}
format.pad = bru->entity.source_pad;
- format.format.width = width;
- format.format.height = height;
+ format.format.width = cfg->width;
+ format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
/* Verify that the format at the output of the pipeline matches the
* requested frame size and media bus code.
*/
- if (format.format.width != width || format.format.height != height ||
+ if (format.format.width != cfg->width ||
+ format.format.height != cfg->height ||
format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
return -EPIPE;
ir_raw_event_handle(serial_ir.rcdev);
}
+/* Needed by serial_ir_probe() */
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+ unsigned int count);
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle);
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier);
+static int serial_ir_open(struct rc_dev *rcdev);
+static void serial_ir_close(struct rc_dev *rcdev);
+
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->min_timeout = 1;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
+ setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+ (unsigned long)&serial_ir);
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
return -EBUSY;
}
- setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- (unsigned long)&serial_ir);
-
result = hardware_init_port();
if (result < 0)
return result;
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->min_timeout = 1;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
struct dw2102_state {
u8 initialized;
u8 last_lock;
+ u8 data[MAX_XFER_SIZE + 4];
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
- u8 obuf[0x40], ibuf[0x40];
+ struct dw2102_state *state;
if (!d)
return -ENODEV;
+
+ state = d->priv;
+
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
+ if (mutex_lock_interruptible(&d->data_mutex) < 0) {
+ mutex_unlock(&d->i2c_mutex);
+ return -EAGAIN;
+ }
switch (num) {
case 1:
switch (msg[0].addr) {
case SU3000_STREAM_CTRL:
- obuf[0] = msg[0].buf[0] + 0x36;
- obuf[1] = 3;
- obuf[2] = 0;
- if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0)
+ state->data[0] = msg[0].buf[0] + 0x36;
+ state->data[1] = 3;
+ state->data[2] = 0;
+ if (dvb_usb_generic_rw(d, state->data, 3,
+ state->data, 0, 0) < 0)
err("i2c transfer failed.");
break;
case DW2102_RC_QUERY:
- obuf[0] = 0x10;
- if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
+ state->data[0] = 0x10;
+ if (dvb_usb_generic_rw(d, state->data, 1,
+ state->data, 2, 0) < 0)
err("i2c transfer failed.");
- msg[0].buf[1] = ibuf[0];
- msg[0].buf[0] = ibuf[1];
+ msg[0].buf[1] = state->data[0];
+ msg[0].buf[0] = state->data[1];
break;
default:
/* always i2c write*/
- obuf[0] = 0x08;
- obuf[1] = msg[0].addr;
- obuf[2] = msg[0].len;
+ state->data[0] = 0x08;
+ state->data[1] = msg[0].addr;
+ state->data[2] = msg[0].len;
- memcpy(&obuf[3], msg[0].buf, msg[0].len);
+ memcpy(&state->data[3], msg[0].buf, msg[0].len);
- if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3,
- ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3,
+ state->data, 1, 0) < 0)
err("i2c transfer failed.");
}
break;
case 2:
/* always i2c read */
- obuf[0] = 0x09;
- obuf[1] = msg[0].len;
- obuf[2] = msg[1].len;
- obuf[3] = msg[0].addr;
- memcpy(&obuf[4], msg[0].buf, msg[0].len);
-
- if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4,
- ibuf, msg[1].len + 1, 0) < 0)
+ state->data[0] = 0x09;
+ state->data[1] = msg[0].len;
+ state->data[2] = msg[1].len;
+ state->data[3] = msg[0].addr;
+ memcpy(&state->data[4], msg[0].buf, msg[0].len);
+
+ if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4,
+ state->data, msg[1].len + 1, 0) < 0)
err("i2c transfer failed.");
- memcpy(msg[1].buf, &ibuf[1], msg[1].len);
+ memcpy(msg[1].buf, &state->data[1], msg[1].len);
break;
default:
warn("more than 2 i2c messages at a time is not handled yet.");
break;
}
+ mutex_unlock(&d->data_mutex);
mutex_unlock(&d->i2c_mutex);
return num;
}
static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
{
struct dw2102_state *state = (struct dw2102_state *)d->priv;
- u8 obuf[] = {0xde, 0};
+ int ret = 0;
info("%s: %d, initialized %d", __func__, i, state->initialized);
if (i && !state->initialized) {
+ mutex_lock(&d->data_mutex);
+
+ state->data[0] = 0xde;
+ state->data[1] = 0;
+
state->initialized = 1;
/* reset board */
- return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
+ ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0);
+ mutex_unlock(&d->data_mutex);
}
- return 0;
+ return ret;
}
static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
return 0;
}
-static int su3000_frontend_attach(struct dvb_usb_adapter *d)
+static int su3000_frontend_attach(struct dvb_usb_adapter *adap)
{
- u8 obuf[3] = { 0xe, 0x80, 0 };
- u8 ibuf[] = { 0 };
+ struct dvb_usb_device *d = adap->dev;
+ struct dw2102_state *state = d->priv;
+
+ mutex_lock(&d->data_mutex);
+
+ state->data[0] = 0xe;
+ state->data[1] = 0x80;
+ state->data[2] = 0;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x02;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x02;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(300);
- obuf[0] = 0xe;
- obuf[1] = 0x83;
- obuf[2] = 0;
+ state->data[0] = 0xe;
+ state->data[1] = 0x83;
+ state->data[2] = 0;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x83;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x83;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0x51;
+ state->data[0] = 0x51;
- if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
- d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
- &d->dev->i2c_adap);
- if (d->fe_adap[0].fe == NULL)
+ mutex_unlock(&d->data_mutex);
+
+ adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
+ &d->i2c_adap);
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
- if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+ if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
&dw2104_ts2020_config,
- &d->dev->i2c_adap)) {
+ &d->i2c_adap)) {
info("Attached DS3000/TS2020!");
return 0;
}
return -EIO;
}
-static int t220_frontend_attach(struct dvb_usb_adapter *d)
+static int t220_frontend_attach(struct dvb_usb_adapter *adap)
{
- u8 obuf[3] = { 0xe, 0x87, 0 };
- u8 ibuf[] = { 0 };
+ struct dvb_usb_device *d = adap->dev;
+ struct dw2102_state *state = d->priv;
+
+ mutex_lock(&d->data_mutex);
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ state->data[0] = 0xe;
+ state->data[1] = 0x87;
+ state->data[2] = 0x0;
+
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x86;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x86;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x80;
- obuf[2] = 0;
+ state->data[0] = 0xe;
+ state->data[1] = 0x80;
+ state->data[2] = 0;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(50);
- obuf[0] = 0xe;
- obuf[1] = 0x80;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x80;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0x51;
+ state->data[0] = 0x51;
- if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
- d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
- &d->dev->i2c_adap, NULL);
- if (d->fe_adap[0].fe != NULL) {
- if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60,
- &d->dev->i2c_adap, &tda18271_config)) {
+ mutex_unlock(&d->data_mutex);
+
+ adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
+ &d->i2c_adap, NULL);
+ if (adap->fe_adap[0].fe != NULL) {
+ if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60,
+ &d->i2c_adap, &tda18271_config)) {
info("Attached TDA18271HD/CXD2820R!");
return 0;
}
return -EIO;
}
-static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d)
+static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap)
{
- u8 obuf[] = { 0x51 };
- u8 ibuf[] = { 0 };
+ struct dvb_usb_device *d = adap->dev;
+ struct dw2102_state *state = d->priv;
+
+ mutex_lock(&d->data_mutex);
- if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
+ state->data[0] = 0x51;
+
+ if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
- d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config,
- &d->dev->i2c_adap);
+ mutex_unlock(&d->data_mutex);
- if (d->fe_adap[0].fe == NULL)
+ adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach,
+ &s421_m88rs2000_config,
+ &d->i2c_adap);
+
+ if (adap->fe_adap[0].fe == NULL)
return -EIO;
- if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
+ if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
&dw2104_ts2020_config,
- &d->dev->i2c_adap)) {
+ &d->i2c_adap)) {
info("Attached RS2000/TS2020!");
return 0;
}
{
struct dvb_usb_device *d = adap->dev;
struct dw2102_state *state = d->priv;
- u8 obuf[3] = { 0xe, 0x80, 0 };
- u8 ibuf[] = { 0 };
struct i2c_adapter *i2c_adapter;
struct i2c_client *client;
struct i2c_board_info board_info;
struct m88ds3103_platform_data m88ds3103_pdata = {};
struct ts2020_config ts2020_config = {};
- if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+ mutex_lock(&d->data_mutex);
+
+ state->data[0] = 0xe;
+ state->data[1] = 0x80;
+ state->data[2] = 0x0;
+
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x02;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x02;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(300);
- obuf[0] = 0xe;
- obuf[1] = 0x83;
- obuf[2] = 0;
+ state->data[0] = 0xe;
+ state->data[1] = 0x83;
+ state->data[2] = 0;
- if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0xe;
- obuf[1] = 0x83;
- obuf[2] = 1;
+ state->data[0] = 0xe;
+ state->data[1] = 0x83;
+ state->data[2] = 1;
- if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
- obuf[0] = 0x51;
+ state->data[0] = 0x51;
- if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0)
+ if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
+ mutex_unlock(&d->data_mutex);
+
/* attach demod */
m88ds3103_pdata.clk = 27000000;
m88ds3103_pdata.i2c_wr_max = 33;
projects / mirror_ubuntu-artful-kernel.git / commitdiff