[media] or51211: apply pr_fmt and use pr_* macros instead of printk

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c
index 1af997eb05784788f1348a99d71c1e54252893f3..10cfc05791689323b0d4ab5b967eb22ff7e9e1db 100644 (file)
--- a/drivers/media/dvb-frontends/or51211.c
+++ b/drivers/media/dvb-frontends/or51211.c
@@ -22,6 +22,8 @@
  *
 */
 
+#define pr_fmt(fmt)    KBUILD_MODNAME ": %s: " fmt, __func__
+
 /*
  * This driver needs external firmware. Please use the command
  * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
@@ -44,9 +46,7 @@
 
 static int debug;
 #define dprintk(args...) \
-       do { \
-               if (debug) printk(KERN_DEBUG "or51211: " args); \
-       } while (0)
+       do { if (debug) pr_debug(args); } while (0)
 
 static u8 run_buf[] = {0x7f,0x01};
 static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
@@ -80,8 +80,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf,
        msg.buf         = (u8 *)buf;
 
        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk(KERN_WARNING "or51211: i2c_writebytes error "
-                      "(addr %02x, err == %i)\n", reg, err);
+               pr_warn("error (addr %02x, err == %i)\n", reg, err);
                return -EREMOTEIO;
        }
 
@@ -98,8 +97,7 @@ static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len)
        msg.buf         = buf;
 
        if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk(KERN_WARNING "or51211: i2c_readbytes error "
-                      "(addr %02x, err == %i)\n", reg, err);
+               pr_warn("error (addr %02x, err == %i)\n", reg, err);
                return -EREMOTEIO;
        }
 
@@ -118,11 +116,11 @@ static int or51211_load_firmware (struct dvb_frontend* fe,
        /* Get eprom data */
        tudata[0] = 17;
        if (i2c_writebytes(state,0x50,tudata,1)) {
-               printk(KERN_WARNING "or51211:load_firmware error eprom addr\n");
+               pr_warn("error eprom addr\n");
                return -1;
        }
        if (i2c_readbytes(state,0x50,&tudata[145],192)) {
-               printk(KERN_WARNING "or51211: load_firmware error eprom\n");
+               pr_warn("error eprom\n");
                return -1;
        }
 
@@ -136,32 +134,32 @@ static int or51211_load_firmware (struct dvb_frontend* fe,
        state->config->reset(fe);
 
        if (i2c_writebytes(state,state->config->demod_address,tudata,585)) {
-               printk(KERN_WARNING "or51211: load_firmware error 1\n");
+               pr_warn("error 1\n");
                return -1;
        }
        msleep(1);
 
        if (i2c_writebytes(state,state->config->demod_address,
                           &fw->data[393],8125)) {
-               printk(KERN_WARNING "or51211: load_firmware error 2\n");
+               pr_warn("error 2\n");
                return -1;
        }
        msleep(1);
 
        if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-               printk(KERN_WARNING "or51211: load_firmware error 3\n");
+               pr_warn("error 3\n");
                return -1;
        }
 
        /* Wait at least 5 msec */
        msleep(10);
        if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-               printk(KERN_WARNING "or51211: load_firmware error 4\n");
+               pr_warn("error 4\n");
                return -1;
        }
        msleep(10);
 
-       printk("or51211: Done.\n");
+       pr_info("Done.\n");
        return 0;
 };
 
@@ -173,14 +171,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode)
        state->config->setmode(fe, mode);
 
        if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-               printk(KERN_WARNING "or51211: setmode error 1\n");
+               pr_warn("error 1\n");
                return -1;
        }
 
        /* Wait at least 5 msec */
        msleep(10);
        if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
-               printk(KERN_WARNING "or51211: setmode error 2\n");
+               pr_warn("error 2\n");
                return -1;
        }
 
@@ -196,7 +194,7 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode)
         *             normal +/-150kHz Carrier acquisition range
         */
        if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
-               printk(KERN_WARNING "or51211: setmode error 3\n");
+               pr_warn("error 3\n");
                return -1;
        }
 
@@ -206,14 +204,14 @@ static int or51211_setmode(struct dvb_frontend* fe, int mode)
        rec_buf[3] = 0x00;
        msleep(20);
        if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
-               printk(KERN_WARNING "or51211: setmode error 5\n");
+               pr_warn("error 5\n");
        }
        msleep(3);
        if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
-               printk(KERN_WARNING "or51211: setmode error 6");
+               pr_warn("error 6\n");
                return -1;
        }
-       dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]);
+       dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]);
 
        return 0;
 }
@@ -248,15 +246,15 @@ static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
        /* Receiver Status */
        if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-               printk(KERN_WARNING "or51132: read_status write error\n");
+               pr_warn("write error\n");
                return -1;
        }
        msleep(3);
        if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-               printk(KERN_WARNING "or51132: read_status read error\n");
+               pr_warn("read error\n");
                return -1;
        }
-       dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
+       dprintk("%x %x\n", rec_buf[0], rec_buf[1]);
 
        if (rec_buf[0] &  0x01) { /* Receiver Lock */
                *status |= FE_HAS_SIGNAL;
@@ -306,20 +304,18 @@ static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
        snd_buf[2] = 0x04;
 
        if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-               printk(KERN_WARNING "%s: error writing snr reg\n",
-                      __func__);
+               pr_warn("error writing snr reg\n");
                return -1;
        }
        if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-               printk(KERN_WARNING "%s: read_status read error\n",
-                      __func__);
+               pr_warn("read_status read error\n");
                return -1;
        }
 
        state->snr = calculate_snr(rec_buf[0], 89599047);
        *snr = (state->snr) >> 16;
 
-       dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0],
+       dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0],
                state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
 
        return 0;
@@ -375,25 +371,24 @@ static int or51211_init(struct dvb_frontend* fe)
 
        if (!state->initialized) {
                /* Request the firmware, this will block until it uploads */
-               printk(KERN_INFO "or51211: Waiting for firmware upload "
-                      "(%s)...\n", OR51211_DEFAULT_FIRMWARE);
+               pr_info("Waiting for firmware upload (%s)...\n",
+                       OR51211_DEFAULT_FIRMWARE);
                ret = config->request_firmware(fe, &fw,
                                               OR51211_DEFAULT_FIRMWARE);
-               printk(KERN_INFO "or51211:Got Hotplug firmware\n");
+               pr_info("Got Hotplug firmware\n");
                if (ret) {
-                       printk(KERN_WARNING "or51211: No firmware uploaded "
-                              "(timeout or file not found?)\n");
+                       pr_warn("No firmware uploaded "
+                               "(timeout or file not found?)\n");
                        return ret;
                }
 
                ret = or51211_load_firmware(fe, fw);
                release_firmware(fw);
                if (ret) {
-                       printk(KERN_WARNING "or51211: Writing firmware to "
-                              "device failed!\n");
+                       pr_warn("Writing firmware to device failed!\n");
                        return ret;
                }
-               printk(KERN_INFO "or51211: Firmware upload complete.\n");
+               pr_info("Firmware upload complete.\n");
 
                /* Set operation mode in Receiver 1 register;
                 * type 1:
@@ -406,7 +401,7 @@ static int or51211_init(struct dvb_frontend* fe)
                 */
                if (i2c_writebytes(state,state->config->demod_address,
                                   cmd_buf,3)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error 5\n");
+                       pr_warn("Load DVR Error 5\n");
                        return -1;
                }
 
@@ -419,13 +414,13 @@ static int or51211_init(struct dvb_frontend* fe)
                msleep(30);
                if (i2c_writebytes(state,state->config->demod_address,
                                   rec_buf,3)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error A\n");
+                       pr_warn("Load DVR Error A\n");
                        return -1;
                }
                msleep(3);
                if (i2c_readbytes(state,state->config->demod_address,
                                  &rec_buf[10],2)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error B\n");
+                       pr_warn("Load DVR Error B\n");
                        return -1;
                }
 
@@ -436,13 +431,13 @@ static int or51211_init(struct dvb_frontend* fe)
                msleep(20);
                if (i2c_writebytes(state,state->config->demod_address,
                                   rec_buf,3)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error C\n");
+                       pr_warn("Load DVR Error C\n");
                        return -1;
                }
                msleep(3);
                if (i2c_readbytes(state,state->config->demod_address,
                                  &rec_buf[12],2)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error D\n");
+                       pr_warn("Load DVR Error D\n");
                        return -1;
                }
 
@@ -454,16 +449,14 @@ static int or51211_init(struct dvb_frontend* fe)
                        get_ver_buf[4] = i+1;
                        if (i2c_writebytes(state,state->config->demod_address,
                                           get_ver_buf,5)) {
-                               printk(KERN_WARNING "or51211:Load DVR Error 6"
-                                      " - %d\n",i);
+                               pr_warn("Load DVR Error 6 - %d\n", i);
                                return -1;
                        }
                        msleep(3);
 
                        if (i2c_readbytes(state,state->config->demod_address,
                                          &rec_buf[i*2],2)) {
-                               printk(KERN_WARNING "or51211:Load DVR Error 7"
-                                      " - %d\n",i);
+                               pr_warn("Load DVR Error 7 - %d\n", i);
                                return -1;
                        }
                        /* If we didn't receive the right index, try again */
@@ -473,10 +466,9 @@ static int or51211_init(struct dvb_frontend* fe)
                }
                dprintk("read_fwbits %10ph\n", rec_buf);
 
-               printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x"
-                      " Status %02x\n",
-                      rec_buf[2], rec_buf[4],rec_buf[6],
-                      rec_buf[12],rec_buf[10]);
+               pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n",
+                       rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12],
+                       rec_buf[10]);
 
                rec_buf[0] = 0x04;
                rec_buf[1] = 0x00;
@@ -485,13 +477,13 @@ static int or51211_init(struct dvb_frontend* fe)
                msleep(20);
                if (i2c_writebytes(state,state->config->demod_address,
                                   rec_buf,3)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error 8\n");
+                       pr_warn("Load DVR Error 8\n");
                        return -1;
                }
                msleep(20);
                if (i2c_readbytes(state,state->config->demod_address,
                                  &rec_buf[8],2)) {
-                       printk(KERN_WARNING "or51211: Load DVR Error 9\n");
+                       pr_warn("Load DVR Error 9\n");
                        return -1;
                }
                state->initialized = 1;