Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Number of sectors written by the frontend.
+
+What: /sys/bus/xen-backend/devices/*/state
+Date: August 2018
+KernelVersion: 4.19
+Contact: Joe Jin <joe.jin@oracle.com>
+Description:
+ The state of the device. One of: 'Unknown',
+ 'Initialising', 'Initialised', 'Connected', 'Closing',
+ 'Closed', 'Reconfiguring', 'Reconfigured'.
blkback. If the frontend tries to use more than
max_persistent_grants, the LRU kicks in and starts
removing 5% of max_persistent_grants every 100ms.
+
+What: /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds
+Date: August 2018
+KernelVersion: 4.19
+Contact: Roger Pau Monné <roger.pau@citrix.com>
+Description:
+ How long a persistent grant is allowed to remain
+ allocated without being in use. The time is in
+ seconds, 0 means indefinitely long.
+ The default is 60 seconds.
0x20 0xfcba0d10 (Magic cookie) AFTR
0x24 exynos_cpu_resume_ns AFTR
0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR
+0x28 0x0 or last value during resume (Exynos542x) System suspend
2. Secure mode
thread.
* Changing the vector length causes all of P0..P15, FFR and all bits of
- Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
flag, does not constitute a change to the vector length for this purpose.
[2] arch/arm64/include/uapi/asm/ptrace.h
AArch64 Linux ptrace ABI definitions
-[3] linux/Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.txt
[4] ARM IHI0055C
http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
Required root node property:
compatible: "amlogic,a113d", "amlogic,meson-axg";
+Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,g12a";
+
Board compatible values (alphabetically, grouped by SoC):
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
+ - "endless,ec100" (Meson8b)
- "hardkernel,odroid-c1" (Meson8b)
- "tronfy,mxq" (Meson8b)
- "amlogic,s400" (Meson axg a113d)
+ - "amlogic,u200" (Meson g12a s905d2)
+
Amlogic Meson Firmware registers Interface
------------------------------------------
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
Raspberry Pi Zero
Required root node properties:
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
Required root node properties:
- compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+i.MX6 Quad Plus SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+
+i.MX6 Quad Plus SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+
+i.MX6 DualLite SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+
+i.MX6 DualLite/Solo SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+
+i.MX6 SoloLite EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+i.MX6 UltraLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+i.MX6 UltraLiteLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+i.MX6 SoloX SDB Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+i.MX6 SoloX Sabre Auto Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+i.MX7 SabreSD Board
+Required root node properties:
+ - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
Generic i.MX boards
-------------------
Required root node properties:
- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+Hi3670 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi3670";
+
+HiKey970 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
+++ /dev/null
-Marvell Berlin SoC Family Device Tree Bindings
----------------------------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
-shall have the following properties:
-
-* Required root node properties:
-compatible: must contain "marvell,berlin"
-
-In addition, the above compatible shall be extended with the specific
-SoC and board used. Currently known SoC compatibles are:
- "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
- "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
- "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
- "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
- "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
-
-* Example:
-
-/ {
- model = "Sony NSZ-GS7";
- compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
- ...
-}
-
-* Marvell Berlin CPU control bindings
-
-CPU control register allows various operations on CPUs, like resetting them
-independently.
-
-Required properties:
-- compatible: should be "marvell,berlin-cpu-ctrl"
-- reg: address and length of the register set
-
-Example:
-
-cpu-ctrl@f7dd0000 {
- compatible = "marvell,berlin-cpu-ctrl";
- reg = <0xf7dd0000 0x10000>;
-};
-
-* Marvell Berlin2 chip control binding
-
-Marvell Berlin SoCs have a chip control register set providing several
-individual registers dealing with pinmux, padmux, clock, reset, and secondary
-CPU boot address. Unfortunately, the individual registers are spread among the
-chip control registers, so there should be a single DT node only providing the
-different functions which are described below.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of following register sets for
- BG2/BG2CD: chip control register set
- BG2Q: chip control register set and cpu pll registers
-
-* Marvell Berlin2 system control binding
-
-Marvell Berlin SoCs have a system control register set providing several
-individual registers dealing with pinmux, padmux, and reset.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of the system control register set
-
-Example:
-
-chip: chip-control@ea0000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xea0000 0x400>;
-
- /* sub-device nodes */
-};
-
-sysctrl: system-controller@d000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xd000 0x100>;
-
- /* sub-device nodes */
-};
- "mediatek,mt2712-apmixedsys", "syscon"
- "mediatek,mt6797-apmixedsys"
- "mediatek,mt7622-apmixedsys"
+ - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
- "mediatek,mt8135-apmixedsys"
- "mediatek,mt8173-apmixedsys"
- #clock-cells: Must be 1
- compatible: Should be one of:
- "mediatek,mt2701-audsys", "syscon"
- "mediatek,mt7622-audsys", "syscon"
+ - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
- #clock-cells: Must be 1
The AUDSYS controller uses the common clk binding from
- compatible: Should be:
- "mediatek,mt2701-bdpsys", "syscon"
- "mediatek,mt2712-bdpsys", "syscon"
+ - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
- #clock-cells: Must be 1
The bdpsys controller uses the common clk binding from
- compatible: Should be:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
+ - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- #clock-cells: Must be 1
- #reset-cells: Must be 1
- compatible: Should be:
- "mediatek,mt2701-hifsys", "syscon"
- "mediatek,mt7622-hifsys", "syscon"
+ - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
- #clock-cells: Must be 1
The hifsys controller uses the common clk binding from
- "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt2712-imgsys", "syscon"
- "mediatek,mt6797-imgsys", "syscon"
+ - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt8173-imgsys", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2712-infracfg", "syscon"
- "mediatek,mt6797-infracfg", "syscon"
- "mediatek,mt7622-infracfg", "syscon"
+ - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
- "mediatek,mt8135-infracfg", "syscon"
- "mediatek,mt8173-infracfg", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt2712-mmsys", "syscon"
- "mediatek,mt6797-mmsys", "syscon"
+ - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt8173-mmsys", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt2712-pericfg", "syscon"
- "mediatek,mt7622-pericfg", "syscon"
+ - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt8135-pericfg", "syscon"
- "mediatek,mt8173-pericfg", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2712-topckgen", "syscon"
- "mediatek,mt6797-topckgen"
- "mediatek,mt7622-topckgen"
+ - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
- "mediatek,mt8135-topckgen"
- "mediatek,mt8173-topckgen"
- #clock-cells: Must be 1
- "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt2712-vdecsys", "syscon"
- "mediatek,mt6797-vdecsys", "syscon"
+ - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt8173-vdecsys", "syscon"
- #clock-cells: Must be 1
Required root node properties:
- compatible = "vamrs,ficus", "rockchip,rk3399";
+- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+ Required root node properties:
+ - compatible = "vamrs,rock960", "rockchip,rk3399";
+
- Amarula Vyasa RK3288 board
Required root node properties:
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+- Asus Tinker board S
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
Required root node properties:
- compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+- Firefly ROC-RK3399-PC board:
+ Required root node properties:
+ - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "pine64,rock64", "rockchip,rk3328";
+- Pine64 RockPro64 board:
+ Required root node properties:
+ - compatible = "pine64,rockpro64", "rockchip,rk3399";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+- Rockchip PX30 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px30-evb", "rockchip,px30";
+
- Rockchip RV1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
Example:
-scu@a04100000 {
+scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
compatible = "renesas,emev2"
- RZ/A1H (R7S72100)
compatible = "renesas,r7s72100"
+ - RZ/A2 (R7S9210)
+ compatible = "renesas,r7s9210"
- SH-Mobile AG5 (R8A73A00/SH73A0)
compatible = "renesas,sh73a0"
- R-Mobile APE6 (R8A73A40)
compatible = "renesas,r8a7745"
- RZ/G1C (R8A77470)
compatible = "renesas,r8a77470"
+ - RZ/G2M (R8A774A1)
+ compatible = "renesas,r8a774a1"
+ - RZ/G2E (RA8774C0)
+ compatible = "renesas,r8a774c0"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
compatible = "renesas,m3ulcb", "renesas,r8a7796"
+ - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+ compatible = "renesas,m3nulcb", "renesas,r8a77965"
- Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,wheat", "renesas,r8a7792"
-Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
-product and revision information. If present, a device node for this register
-should be added.
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information. If present, a device
+node for this register should be added.
Required properties:
- - compatible: Must be "renesas,prr".
+ - compatible: Must be "renesas,prr" or "renesas,bsid"
- reg: Base address and length of the register block.
--- /dev/null
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
+---------------------------------------------------------------
+
+Work in progress statement:
+
+Device tree files and bindings applying to Marvell Berlin SoCs and boards are
+considered "unstable". Any Marvell Berlin device tree binding may change at any
+time. Be sure to use a device tree binary and a kernel image generated from the
+same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
+Boards with the Synaptics AS370 SoC shall have the following properties:
+ Required root node property:
+ compatible: "syna,as370"
+
+Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
+shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "marvell,berlin"
+
+In addition, the above compatible shall be extended with the specific
+SoC and board used. Currently known SoC compatibles are:
+ "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
+ "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
+ "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
+ "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
+ "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
+
+* Example:
+
+/ {
+ model = "Sony NSZ-GS7";
+ compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+ ...
+}
+
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xf7dd0000 0x10000>;
+};
+
+* Marvell Berlin2 chip control binding
+
+Marvell Berlin SoCs have a chip control register set providing several
+individual registers dealing with pinmux, padmux, clock, reset, and secondary
+CPU boot address. Unfortunately, the individual registers are spread among the
+chip control registers, so there should be a single DT node only providing the
+different functions which are described below.
+
+Required properties:
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
+- reg: address and length of following register sets for
+ BG2/BG2CD: chip control register set
+ BG2Q: chip control register set and cpu pll registers
+
+* Marvell Berlin2 system control binding
+
+Marvell Berlin SoCs have a system control register set providing several
+individual registers dealing with pinmux, padmux, and reset.
+
+Required properties:
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
+- reg: address and length of the system control register set
+
+Example:
+
+chip: chip-control@ea0000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0xea0000 0x400>;
+
+ /* sub-device nodes */
+};
+
+sysctrl: system-controller@d000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0xd000 0x100>;
+
+ /* sub-device nodes */
+};
nvidia,ventana
toradex,apalis_t30
toradex,apalis_t30-eval
+ toradex,apalis_t30-v1.1
+ toradex,apalis_t30-v1.1-eval
toradex,apalis-tk1
toradex,apalis-tk1-eval
- toradex,colibri_t20-512
+ toradex,apalis-tk1-v1.2
+ toradex,apalis-tk1-v1.2-eval
+ toradex,colibri_t20
+ toradex,colibri_t20-eval-v3
+ toradex,colibri_t20-iris
toradex,colibri_t30
toradex,colibri_t30-eval-v3
- toradex,iris
Trusted Foundations
-------------------------------------------
pmc@c360000 {
nvidia,invert-interrupt;
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+Pad configurations are described with pin configuration nodes which
+are placed under the pmc node and they are referred to by the pinctrl
+client properties. For more information see
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+
+The following pads are present on Tegra186:
+csia csib dsi mipi-bias
+pex-clk-bias pex-clk3 pex-clk2 pex-clk1
+usb0 usb1 usb2 usb-bias
+uart audio hsic dbg
+hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv
+sdmmc4 cam dsib dsic
+dsid csic csid csie
+dsif spi ufs dmic-hv
+edp sdmmc1-hv sdmmc3-hv conn
+audio-hv ao-hv
+
+Required pin configuration properties:
+ - pins: A list of strings, each of which contains the name of a pad
+ to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+ TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the above pads except
+ for ao-hv. Following pads have software configurable signaling
+ voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
+ ao-hv.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra186-pmc";
+ reg = <0 0x0c360000 0 0x10000>,
+ <0 0x0c370000 0 0x10000>,
+ <0 0x0c380000 0 0x10000>,
+ <0 0x0c390000 0 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@3400000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+
+ ...
+
+ sor0: sor@15540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
power-domains = <&pd_audio>;
...
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+The pad configuration state nodes are placed under the pmc node and they
+are referred to by the pinctrl client properties. For more information
+see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+The pad name should be used as the value of the pins property in pin
+configuration nodes.
+
+The following pads are present on Tegra124 and Tegra132:
+audio bb cam comp
+csia csb cse dsi
+dsib dsic dsid hdmi
+hsic hv lvds mipi-bias
+nand pex-bias pex-clk1 pex-clk2
+pex-cntrl sdmmc1 sdmmc3 sdmmc4
+sys_ddc uart usb0 usb1
+usb2 usb_bias
+
+The following pads are present on Tegra210:
+audio audio-hv cam csia
+csib csic csid csie
+csif dbg debug-nonao dmic
+dp dsi dsib dsic
+dsid emmc emmc2 gpio
+hdmi hsic lvds mipi-bias
+pex-bias pex-clk1 pex-clk2 pex-cntrl
+sdmmc1 sdmmc3 spi spi-hv
+uart usb0 usb1 usb2
+usb3 usb-bias
+
+Required pin configuration properties:
+ - pins: Must contain name of the pad(s) to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
+ or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the Tegra124 and
+ Tegra132 pads. None of the Tegra124 or Tegra132 pads support
+ signaling voltage switching.
+
+Note: All of the listed Tegra210 pads except pex-cntrl support power
+ state configuration. Signaling voltage switching is supported on
+ following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
+ pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@700b0000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+ ...
+ sor@54540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
attached to every HLIC: software interrupts, the timer interrupt, and external
interrupts. Software interrupts are used to send IPIs between cores. The
timer interrupt comes from an architecturally mandated real-time timer that is
-controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
interrupts connect all other device interrupts to the HLIC, which are routed
via the platform-level interrupt controller (PLIC).
Required properties:
- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>
+- #interrupt-cells : should be <1>. The interrupt sources are defined by the
+ RISC-V supervisor ISA manual, with only the following three interrupts being
+ defined for supervisor mode:
+ - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+ call and is reserved for use by software.
+ - Source 5 is the supervisor timer interrupt, which can be configured by
+ SBI calls and implements a one-shot timer.
+ - Source 9 is the supervisor external interrupt, which chains to all other
+ device interrupts.
- interrupt-controller : Identifies the node as an interrupt controller
Furthermore, this interrupt-controller MUST be embedded inside the cpu
...
cpu1-intc: interrupt-controller {
#interrupt-cells = <1>;
- compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+ compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};
- compatible : must be one of the following string:
"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
+ "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
+ generation one m4u HW.
"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
- reg : m4u register base and size.
- interrupts : the interrupt of m4u.
according to the local arbiter index, like larb0, larb1, larb2...
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
Specifies the mtk_m4u_id as defined in
- dt-binding/memory/mt2701-larb-port.h for mt2701,
+ dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
dt-binding/memory/mt2712-larb-port.h for mt2712, and
dt-binding/memory/mt8173-larb-port.h for mt8173.
Required properties:
- compatible : must be one of the following string:
"mediatek,mt8173-jpgdec"
+ "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
"mediatek,mt2701-jpgdec"
- reg : physical base address of the jpeg decoder registers and length of
memory mapped region.
- compatible : must be one of :
"mediatek,mt2701-smi-common"
"mediatek,mt2712-smi-common"
+ "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
"mediatek,mt8173-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
+ "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8173-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
the register.
- "smi" : It's the clock for transfer data and command.
-Required property for mt2701 and mt2712:
+Required property for mt2701, mt2712 and mt7623:
- mediatek,larb-id :the hardware id of this larb.
Example:
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
+Required properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg: a total of 3 register base addresses, the first one must be the
+ Switch Register Access block base, the second is the port 5/4 mux
+ configuration register and the third one is the SGMII configuration
+ and status register base address.
+
+ - interrupts: a total of 13 interrupts must be specified, in the following
+ order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+ then the timestamping interrupt and the sleep timer interrupts for ports
+ 5,7,8.
+
+Optional properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg-names: a total of 3 names matching the 3 base register address, must
+ be in the following order:
+ "srab"
+ "mux_config"
+ "sgmii_config"
+
+ - interrupt-names: a total of 13 names matching the 13 interrupts specified
+ must be in the following order:
+ "link_state_p0"
+ "link_state_p1"
+ "link_state_p2"
+ "link_state_p3"
+ "link_state_p4"
+ "link_state_p5"
+ "link_state_p7"
+ "link_state_p8"
+ "phy"
+ "ts"
+ "imp_sleep_timer_p5"
+ "imp_sleep_timer_p7"
+ "imp_sleep_timer_p8"
+
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
"allwinner,sun8i-a83t-sid"
"allwinner,sun8i-h3-sid"
"allwinner,sun50i-a64-sid"
+ "allwinner,sun50i-h5-sid"
- reg: Should contain registers location and length
Required properties:
- compatible : "actions,s500-sps" for S500
"actions,s700-sps" for S700
+ "actions,s900-sps" for S900
- reg : Offset and length of the register set for the device.
- #power-domain-cells : Must be 1.
See macros in:
include/dt-bindings/power/owl-s500-powergate.h for S500
include/dt-bindings/power/owl-s700-powergate.h for S700
+ include/dt-bindings/power/owl-s900-powergate.h for S900
Example:
Required Properties:
- compatible: GRF should be one of the following:
+ - "rockchip,px30-grf", "syscon": for px30
- "rockchip,rk3036-grf", "syscon": for rk3036
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3399-grf", "syscon": for rk3399
- "rockchip,rv1108-grf", "syscon": for rv1108
- compatible: PMUGRF should be one of the following:
+ - "rockchip,px30-pmugrf", "syscon": for px30
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
- hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+ - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
embest Shenzhen Embest Technology Co., Ltd.
emmicro EM Microelectronic
emtrion emtrion GmbH
+endless Endless Mobile, Inc.
energymicro Silicon Laboratories (formerly Energy Micro AS)
engicam Engicam S.r.l.
epcos EPCOS AG
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+plx Broadcom Corporation (formerly PLX Technology)
portwell Portwell Inc.
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
- "renesas,r8a7745-wdt" (RZ/G1E)
+ - "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)
- "renesas,r8a7791-wdt" (R-Car M2-W)
- "renesas,r8a7792-wdt" (R-Car V2H)
- "renesas,r7s72100-wdt" (RZ/A1)
The generic compatible string must be:
- "renesas,rza-wdt" for RZ/A
- - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G
- - "renesas,rcar-gen3-wdt" for R-Car Gen3
+ - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
+ - "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2
- reg : Should contain WDT registers location and length
- clocks : the clock feeding the watchdog timer.
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
-Author: Lothar Felten <l-felten@ti.com>
+Author: Lothar Felten <lothar.felten@gmail.com>
Description
-----------
returned buffer. If NULL is returned, the threshold was not met or a bounce
buffer could not be allocated. Fall back to PIO in that case.
-In any case, a buffer obtained from above needs to be released. It ensures data
-is copied back to the message and a potentially used bounce buffer is freed::
+In any case, a buffer obtained from above needs to be released. Another helper
+function ensures a potentially used bounce buffer is freed::
- i2c_release_dma_safe_msg_buf(msg, dma_buf);
+ i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred);
+
+The last argument 'xferred' controls if the buffer is synced back to the
+message or not. No syncing is needed in cases setting up DMA had an error and
+there was no data transferred.
The bounce buffer handling from the core is generic and simple. It will always
allocate a new bounce buffer. If you want a more sophisticated handling (e.g.
LIBATA PATA DRIVERS
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-M: Jens Axboe <kernel.dk>
+M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/pata_*.c
F: drivers/ata/ata_generic.c
M: Hans de Goede <hdegoede@redhat.com>
M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/
F: include/linux/ata.h
VERSION = 4
PATCHLEVEL = 19
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Merciless Moray
# *DOCUMENTATION*
# disable pointer signed / unsigned warnings in gcc 4.0
KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb \
+ meson8b-ec100.dtb \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb \
meson8m2-mxiii-plus.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-ccimx6ulsbcexpress.dtb \
+ imx6ul-ccimx6ulsbcpro.dtb \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
- imx6ull-colibri-wifi-eval-v3.dtb
+ imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
omap3-gta04a3.dtb \
omap3-gta04a4.dtb \
omap3-gta04a5.dtb \
+ omap3-gta04a5one.dtb \
omap3-ha.dtb \
omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
+ am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-pdu001.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i-h3-beelink-x2.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-h3-orangepi-zero-plus2.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
+ tegra20-colibri-eval-v3.dtb \
tegra20-colibri-iris.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-apalis-eval.dtb \
+ tegra30-apalis-v1.1-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db-88f6820-amc.dtb \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&mmc1 {
*/
#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
&ldo3_reg {
regulator-min-microvolt = <1800000>;
};
&i2c0 {
- tda19988: tda19988 {
+ tda19988: tda19988@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
+ nxp,calib-gpios = <&gpio1 25 0>;
+ interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
+ slaves = <1>;
};
&davinci_mdio {
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
-};
-&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
- phy-mode = "rgmii-txid";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
+
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <3>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@5 {
+ reg = <5>;
+ };
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ push_button_pins: pinmux_push_button {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ status = "okay";
+};
+
+&cpsw_emac1 {
+ status = "okay";
+};
+
+&phy_sel {
+ reg= <0x44e10650 0xf5>;
+ rmii-clock-ext;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc1_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ m25p80@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x40000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+
+ tpm_spi_tis@0 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+ model = "Moxa UC-2101";
+ compatible = "moxa,uc-2101", "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "UC2100:GREEN:USER";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ >;
+ };
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+ status = "disabled";
+};
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
};
- bmp280: pressure@78 {
+ bmp280: pressure@76 {
compatible = "bosch,bmp280";
reg = <0x76>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
ti,pindir-d0-out-d1-in;
status = "okay";
- cfaf240320a032t {
+ display-controller@0 {
compatible = "orisetech,otm3225a";
reg = <0>;
spi-max-frequency = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
/* Ethernet */
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&mac {
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
status = "okay";
slaves = <1>;
cpsw_emac0: slave@4a100200 {
- phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-handle = <ðernetphy0>;
};
--- /dev/null
+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ codec1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_1>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ codec2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master2>;
+ simple-audio-card,frame-master = <&sound_master2>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master2: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_2>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ expander-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ record {
+ label = "Record";
+ /* linux,code = <BTN_0>; */
+ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ play {
+ label = "Play";
+ linux,code = <KEY_PLAY>;
+ gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ Stop {
+ label = "Stop";
+ linux,code = <KEY_STOP>;
+ gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+ };
+
+ fwd {
+ label = "FWD";
+ linux,code = <KEY_FASTFORWARD>;
+ gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rwd {
+ label = "RWD";
+ linux,code = <KEY_REWIND>;
+ gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ shift {
+ label = "Shift";
+ linux,code = <KEY_LEFTSHIFT>;
+ gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ Mode {
+ label = "Mode";
+ linux,code = <BTN_MODE>;
+ gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+ };
+
+ Menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ Up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ Down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c2 {
+ /* Audio codecs */
+ tlv320aic23_1: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ tlv320aic23_2: codec@1b {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1b>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Audio codecs */
+ tlv320aic23_3: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ /* GPIO Expanders */
+ tca6416_2: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ tca6416_3: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ /* TVP5146 Analog Video decoder input */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&mcbsp1 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+};
#include "am3517.dtsi"
#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
#include <dt-bindings/input/input.h>
/ {
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
+ system-power-controller;
status = "disabled";
};
};
};
- qspi: qspi@47900000 {
+ qspi: spi@47900000 {
compatible = "ti,am4372-qspi";
reg = <0x47900000 0x100>,
<0x30000000 0x4000000>;
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@16 {
+ reg = <16>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <16>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
};
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
+&sn65hvs882 {
+ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
};
/* touch controller */
- ads7846@0 {
+ touchscreen@1 {
pinctrl-names = "default";
pinctrl-0 = <&ads7846_pins>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&usb2_phy1 {
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
};
};
};
+
+&cpu0 {
+ vdd-supply = <&smps12_reg>;
+};
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
clock-names = "apb_pclk";
};
- pb1176_ssp: ssp@1010b000 {
+ pb1176_ssp: spi@1010b000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1010b000 0x1000>;
interrupt-parent = <&intc_dc1176>;
clock-names = "uartclk", "apb_pclk";
};
- ssp@1000d000 {
+ spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
interrupt-parent = <&intc_pb11mp>;
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 385 AMC";
+ compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ spi1 = &spi1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&uart0 {
+ /*
+ * Exported on the micro USB connector CON3
+ * through an FTDI
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+
+ð0 {
+ pinctrl-names = "default";
+ /*
+ * The Reference Clock 0 is used to provide a
+ * clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+ð2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x40000000>;
+ label = "user";
+ };
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@100000 {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ };
+ };
+};
+
+&refclk {
+ clock-frequency = <20000000>;
+};
&clearfog_sdhci_cd_pins>;
pinctrl-names = "default";
status = "okay";
- vmmc = <®_3p3v>;
+ vmmc-supply = <®_3p3v>;
wp-inverted;
};
};
};
- nand: nand@d0000 {
+ nand_controller: nand-controller@d0000 {
clocks = <&dfx_coredivclk 0>;
};
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
pp0: packet-processor@0 {
- compatible = "marvell,prestera-98dx3236";
+ compatible = "marvell,prestera-98dx3236", "marvell,prestera";
reg = <0 0x4000000>;
interrupts = <33>, <34>, <35>;
dfx = <&dfx>;
};
&pp0 {
- compatible = "marvell,prestera-98dx3336";
+ compatible = "marvell,prestera-98dx3336", "marvell,prestera";
};
};
&pp0 {
- compatible = "marvell,prestera-98dx4251";
+ compatible = "marvell,prestera-98dx4251", "marvell,prestera";
interrupts = <33>, <34>, <35>, <36>;
};
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&sdio {
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&spi0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HXT StarDragon 4800 REP2 AST2520";
+ compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_fault1 {
+ label = "System_fault1";
+ gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ system_fault2 {
+ label = "System_fault2";
+ gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default
+ &pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+ current-speed = <115200>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp421@1e {
+ compatible = "ti,tmp421";
+ reg = <0x1e>;
+ };
+ tmp421@2a {
+ compatible = "ti,tmp421";
+ reg = <0x2a>;
+ };
+ tmp421@1c {
+ compatible = "ti,tmp421";
+ reg = <0x1c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ nvt210@4c {
+ compatible = "nvt210";
+ reg = <0x4c>;
+ };
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9641@70 {
+ compatible = "nxp,pca9641";
+ reg = <0x70>;
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ dps650ab@58 {
+ compatible = "dps650ab";
+ reg = <0x58>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_c7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BIOS_SPI_MUX_S";
+ };
+ pin_gpio_d1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PHY2_RESET_N";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook TiogaPass BMC";
+ compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart1 {
+ // Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+ //Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+ status = "okay";
+ //X24 Riser
+};
+
+&i2c2 {
+ status = "okay";
+ // Mezz Management SMBus
+};
+
+&i2c3 {
+ status = "okay";
+ // SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+ status = "okay";
+ // BMC Debug Header
+};
+
+&i2c5 {
+ status = "okay";
+ // CPU Voltage regulators
+};
+
+&i2c6 {
+ status = "okay";
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ //HSC, AirMax Conn A
+};
+
+&i2c8 {
+ status = "okay";
+ //Mezz Sensor SMBus
+};
+
+&i2c9 {
+ status = "okay";
+ //USB Debug Connector
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
model = "Quanta Q71L BMC";
compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+ aliases {
+ i2c14 = &i2c_pcie2;
+ i2c15 = &i2c_pcie3;
+ i2c16 = &i2c_pcie6;
+ i2c17 = &i2c_pcie7;
+ i2c18 = &i2c_pcie1;
+ i2c19 = &i2c_pcie4;
+ i2c20 = &i2c_pcie5;
+ i2c21 = &i2c_pcie8;
+ i2c22 = &i2c_pcie9;
+ i2c23 = &i2c_pcie10;
+ i2c24 = &i2c_ssd1;
+ i2c25 = &i2c_ssd2;
+ i2c26 = &i2c_psu4;
+ i2c27 = &i2c_psu1;
+ i2c28 = &i2c_psu3;
+ i2c29 = &i2c_psu2;
+ };
+
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
};
+&ibt {
+ status = "okay";
+};
+
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
i2c_psu1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu2: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
};
status = "okay";
};
+&adc {
+ status = "okay";
+};
+
&pwm_tacho {
status = "okay";
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
&i2c1 {
status = "okay";
- eeprom@87 {
+ eeprom@57 {
compatible = "giantec,gt24c32a", "atmel,24c32";
- reg = <87>;
+ reg = <0x57>;
pagesize = <32>;
};
};
&i2c1 {
status = "okay";
- ft5426@56 {
+ ft5426@38 {
compatible = "focaltech,ft5426", "edt,edt-ft5406";
- reg = <56>;
+ reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_ctp_int>;
compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- nattis {
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOD 28
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
-
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOD 5
- AT91_PERIPH_GPIO
- AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_lcd_prlud0: lcd_prlud0 {
- atmel,pins =
- <AT91_PIOA 21
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
-
- pinctrl_lcd_hipow0: lcd_hipow0 {
- atmel,pins =
- <AT91_PIOA 23
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
};
panel: panel {
- compatible = "sharp,lq150x1lg11";
+ compatible = "sharp,lq150x1lg11", "panel-lvds";
+
backlight = <&panel_bl>;
power-supply = <&panel_reg>;
+ width-mm = <304>;
+ height-mm = <228>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ // 1024x768 @ 60Hz (typical)
+ clock-frequency = <50000000 65000000 80000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hfront-porch = <48 88 88>;
+ hback-porch = <96 168 168>;
+ hsync-len = <32 64 64>;
+ vsync-len = <3 13 74>;
+ vfront-porch = <3 13 74>;
+ vback-porch = <3 12 74>;
+ };
+
port {
panel_input: endpoint {
remote-endpoint = <&lvds_encoder_output>;
};
lvds-encoder {
- compatible = "lvds-encoder";
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
ports {
#address-cells = <1>;
};
};
+&pinctrl {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lvds_prlud0: lvds_prlud0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_lvds_hipow0: lvds_hipow0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
hlcdc-display-controller {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base
- &pinctrl_lcd_rgb565
- &pinctrl_lcd_prlud0
- &pinctrl_lcd_hipow0>;
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
port@0 {
hlcdc_output: endpoint {
remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <16>;
};
};
};
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
};
};
status = "okay";
};
+ adc: adc@fc030000 {
+ vddana-supply = <&vddana>;
+ vref-supply = <&advref>;
+
+ status = "disabled";
+ };
+
pinctrl@fc038000 {
pinctrl_can1_default: can1_default {
linux,default-trigger = "heartbeat";
};
};
+
+ vddin_3v3: fixed-regulator-vddin_3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDIN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vddana: fixed-regulator-vddana {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddin_3v3>;
+ status = "okay";
+ };
+
+ advref: fixed-regulator-advref {
+ compatible = "regulator-fixed";
+
+ regulator-name = "advref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddana>;
+ status = "okay";
+ };
};
reg = <0x40000 0xc0000>;
};
- bootloaderenv@0x100000 {
- label = "bootloader env";
+ bootloaderenvred@0x100000 {
+ label = "bootloader env redundant";
reg = <0x100000 0x40000>;
};
- bootloaderenvred@0x140000 {
- label = "bootloader env redundant";
+ bootloaderenv@0x140000 {
+ label = "bootloader env";
reg = <0x140000 0x40000>;
};
status = "okay";
};
+ i2s0: i2s@f8050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ status = "disabled"; /* conflict with can0 */
+ };
+
can0: can@f8054000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
bias-disable;
};
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PC1__I2SC0_CK>,
+ <PIN_PC2__I2SC0_MCK>,
+ <PIN_PC3__I2SC0_WS>,
+ <PIN_PC4__I2SC0_DI0>,
+ <PIN_PC5__I2SC0_DO0>;
+ bias-disable;
+ };
+
+ pinctrl_i2s1_default: i2s1_default {
+ pinmux = <PIN_PA15__I2SC1_CK>,
+ <PIN_PA14__I2SC1_MCK>,
+ <PIN_PA16__I2SC1_WS>,
+ <PIN_PA17__I2SC1_DI0>,
+ <PIN_PA18__I2SC1_DO0>;
+ bias-disable;
+ };
+
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PB9__GPIO>;
bias-pull-up;
status = "okay";
};
+ i2s1: i2s@fc04c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_default>;
+ status = "disabled"; /* conflict with spi0, sdmmc1 */
+ };
+
can1: can@fc050000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x0f800000>;
+ reg = <0x800000 0x1f800000>;
};
};
};
compatible = "axentia,tse850v3", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- tse850 {
- pinctrl_usba_vbus: usba-vbus {
- atmel,pins =
- <AT91_PIOC 31
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
sck: oscillator {
compatible = "fixed-clock";
};
};
+&pinctrl {
+ tse850 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&usart0 {
status = "okay";
i2c2: i2c@f8024000 {
status = "okay";
- rtc1: rtc@64 {
+ rtc1: rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
spi-max-frequency = <15000000>;
};
- tsc2046@0 {
+ tsc2046@2 {
reg = <2>;
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
};
};
- uart1 {
+ usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
uboot@40000 {
label = "u-boot";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- ubootenv@c0000 {
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
label = "U-Boot Env";
- reg = <0xc0000 0x140000>;
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
};
kernel@200000 {
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x1f800000>;
+ reg = <0x800000 0x0f800000>;
};
};
};
reg = <0x33000 0x14>;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
brcm,nand-has-wp;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
srab: srab@36000 {
compatible = "brcm,nsp-srab";
- reg = <0x36000 0x1000>;
+ reg = <0x36000 0x1000>,
+ <0x3f308 0x8>,
+ <0x3f410 0xc>;
+ reg-names = "srab", "mux_config", "sgmii";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "link_state_p0",
+ "link_state_p1",
+ "link_state_p2",
+ "link_state_p3",
+ "link_state_p4",
+ "link_state_p5",
+ "link_state_p7",
+ "link_state_p8",
+ "phy",
+ "ts",
+ "imp_sleep_timer_p5",
+ "imp_sleep_timer_p7",
+ "imp_sleep_timer_p8";
#address-cells = <1>;
#size-cells = <0>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+ model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "GPIO0",
+ "GPIO1",
+ "GPIO2",
+ "GPIO3",
+ "GPIO4",
+ "GPIO5",
+ "GPIO6",
+ "GPIO7",
+ "GPIO8",
+ "GPIO9",
+ "GPIO10",
+ "GPIO11",
+ "GPIO12",
+ "GPIO13",
+ "GPIO14",
+ "GPIO15",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "GPIO28",
+ "GPIO29",
+ "GPIO30",
+ "GPIO31",
+ "GPIO32",
+ "GPIO33",
+ "GPIO34",
+ "GPIO35",
+ "GPIO36",
+ "GPIO37",
+ "GPIO38",
+ "GPIO39",
+ "GPIO40",
+ "GPIO41",
+ "GPIO42",
+ "GPIO43",
+ "GPIO44",
+ "GPIO45",
+ "GPIO46",
+ "GPIO47",
+ /* Used by eMMC */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+ hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ reg_3v3: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HDMI_HPD_N",
+ "EMMC_EN_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+ status = "okay";
+ };
+};
+
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+ vmmc-supply = <®_3v3>;
+ vqmmc-supply = <®_1v8>;
+ status = "okay";
+};
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
/ {
aliases {
ethernet0 = ðernet;
ethernet: ethernet@1 {
compatible = "usb424,7800";
reg = <1>;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ eth_phy: ethernet-phy@1 {
+ reg = <1>;
+ microchip,led-modes = <
+ LAN78XX_LINK_1000_ACTIVITY
+ LAN78XX_LINK_10_100_ACTIVITY
+ >;
+ };
+ };
};
};
};
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb2 {
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ nvram@80000 {
+ label = "nvram";
+ reg = <0x00080000 0x00180000>;
+ };
+
+ firmware@200000 {
+ label = "firmware";
+ reg = <0x00200000 0x07cc0000>;
+ compatible = "brcm,trx";
+ };
+
+ asus@7ec0000 {
+ label = "asus";
+ reg = <0x07ec0000 0x00140000>;
+ read-only;
+ };
+ };
+};
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb3_phy {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
};
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
open-source;
priority = <200>;
};
+
+ /* Hardware I2C block cannot do more than 63 bytes per transfer,
+ * which would prevent reading from a SFP's EEPROM (256 byte).
+ */
+ i2c1: i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+ };
};
&amac0 {
reg = <4>;
};
+ port@5 {
+ label = "sfp";
+ phy-mode = "sgmii";
+ reg = <5>;
+ sfp = <&sfp>;
+ managed = "in-band-status";
+ };
+
port@8 {
ethernet = <&amac2>;
label = "cpu";
gpio-controller;
#gpio-cells = <2>;
};
+ tca6416_bb: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&wdt {
compatible = "ti,ads7957";
reg = <3>;
#io-channel-cells = <1>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <1000000>;
+ ti,spi-wdelay = <63>;
vref-supply = <&adc_ref>;
};
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc1 {
status = "disabled";
};
status = "okay";
clock-frequency = <100000>;
- si5351: clock-generator {
+ si5351: clock-generator@60 {
compatible = "silabs,si5351a-msop";
reg = <0x60>;
#address-cells = <1>;
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- spi0: spi-ctrl@10600 {
+ spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- i2c: i2c-ctrl@11000 {
+ i2c: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
status = "disabled";
};
- spi1: spi-ctrl@14600 {
+ spi1: spi@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
- ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
};
};
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
status = "disabled";
};
- qspi: qspi@4b300000 {
+ qspi: spi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>,
<0x5c000000 0x4000000>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;
s2mps14_osc: clocks {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
samsung,pin-val = <1>;
};
+
+ s2mps14_irq: s2mps14-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&rtc {
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max8997_irq>;
max8997,pmic-buck1-dvs-voltage = <1350000>;
max8997,pmic-buck2-dvs-voltage = <1100000>;
};
};
+&pinctrl_1 {
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-3", "gpx0-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&sdhci_0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
regulator-max-microvolt = <1800000>;
};
+ tflash_reg: LDO17 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.2V";
regulator-min-microvolt = <1200000>;
status = "okay";
};
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&tflash_reg>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&serial_0 {
status = "okay";
};
pmic@66 {
compatible = "national,lp3974";
+ interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lp3974_irq>;
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
};
&pinctrl_1 {
+ lp3974_irq: lp3974-irq {
+ samsung,pins = "gpx0-7", "gpx2-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
&sdhci_2 {
bus-width = <4>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
vqmmc-supply = <&ldo4_reg>;
- cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
};
+ panel: panel {
+ compatible = "boe,hv070wsa-100";
+ power-supply = <&vcc_3v3_reg>;
+ enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
reg = <2>;
regulator-name = "hdmi-en";
};
+
+ vcc_1v2_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vcc_1v8_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
fixed-rate-clocks {
cpu0-supply = <&buck2_reg>;
};
+&dsi_0 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ samsung,burst-clock-frequency = <320000000>;
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358764";
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ bridge_out_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+};
+
&dp {
status = "okay";
samsung,color-space = <0>;
};
&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
status = "okay";
- ddc = <&i2c_2>;
- hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ ddc = <&i2c_ddc>;
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
};
};
-&i2c_2 {
- status = "okay";
- /* used by HDMI DDC */
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
&i2c_3 {
status = "okay";
cap-sd-highspeed;
};
+&pinctrl_0 {
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&rtc {
status = "okay";
};
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+
+&soc {
+ /*
+ * For unknown reasons HDMI-DDC does not work with Exynos I2C
+ * controllers. Lets use software I2C over GPIO pins as a workaround.
+ */
+ i2c_ddc: i2c-gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_gpio_bus>;
+ status = "okay";
+ compatible = "i2c-gpio";
+ gpios = <&gpa0 6 0 /* sda */
+ &gpa0 7 0 /* scl */
+ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ i2c2_gpio_bus: i2c2-gpio-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&pinctrl_1 {
samsung,model = "Snow-I2S-MAX98090";
samsung,audio-codec = <&max98090>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ codec {
+ sound-dai = <&max98090 0>, <&hdmi>;
+ };
};
};
interrupt-parent = <&gpx0>;
pinctrl-names = "default";
pinctrl-0 = <&max98090_irq>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "mclk";
+ #sound-dai-cells = <1>;
};
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1050000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1075000>;
+ clock-latency-ns = <140000>;
+ opp-suspend;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1125000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
#phy-cells = <0>;
};
+ mipi_phy: video-phy@10040710 {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ reg = <0x10040710 0x100>;
+ #phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
+ };
+
+ dsi_0: dsi@14500000 {
+ compatible = "samsung,exynos4210-mipi-dsi";
+ reg = <0x14500000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,power-domain = <&pd_disp1>;
+ phys = <&mipi_phy 3>;
+ phy-names = "dsim";
+ clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+ clock-names = "bus_clk", "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
bus-width = <4>;
cap-sd-highspeed;
vmmc-supply = <&ldo21_reg>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+ sd2_wp: sd2-wp {
+ samsung,pins = "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ /* Pin is floating so be sure to disable write-protect */
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-always-on;
};
+ ldo2_reg: LDO2 {
+ regulator-name = "vdd_ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
+ /* Unused */
regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
};
ldo13_reg: LDO13 {
regulator-max-microvolt = <2800000>;
};
+ ldo14_reg: LDO14 {
+ /* Unused */
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3300000>;
};
ldo16_reg: LDO16 {
+ /* Unused */
regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo17_reg: LDO17 {
regulator-max-microvolt = <2800000>;
};
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ ldo20_reg: LDO20 {
+ /* Unused */
+ regulator-name = "vdd_ldo20";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo21_reg: LDO21 {
+ /* Unused */
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo22_reg: LDO22 {
+ /* Unused */
+ regulator-name = "vdd_ldo22";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_mifs";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
};
+ ldo24_reg: LDO24 {
+ /* Unused */
+ regulator-name = "vdd_ldo24";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo26_reg: LDO26 {
+ /* Used on XU3, XU3-Lite and XU4 */
regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_g3ds";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
+ ldo28_reg: LDO28 {
+ /* Used on XU3 */
+ regulator-name = "vdd_ldo28";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo29_reg: LDO29 {
+ /* Unused */
+ regulator-name = "vdd_ldo29";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo30_reg: LDO30 {
+ /* Unused */
+ regulator-name = "vdd_ldo30";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo31_reg: LDO31 {
+ /* Unused */
+ regulator-name = "vdd_ldo31";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo32_reg: LDO32 {
+ /* Unused */
+ regulator-name = "vdd_ldo32";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo33_reg: LDO33 {
+ /* Unused */
+ regulator-name = "vdd_ldo33";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo34_reg: LDO34 {
+ /* Unused */
+ regulator-name = "vdd_ldo34";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo35_reg: LDO35 {
+ /* Unused */
+ regulator-name = "vdd_ldo35";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "vdd_ldo36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "vdd_ldo37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ /* Unused */
+ regulator-name = "vdd_ldo38";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
status = "okay";
};
+&ldo26_reg {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+};
+
&mixer {
status = "okay";
};
};
};
+&ldo28_reg {
+ regulator-name = "dp_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
&pwm {
/*
* PWM 0 -- fan
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint@0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint@0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint@0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint@0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel0_out_port0: endpoint {
remote-endpoint =
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel1_out_port0: endpoint {
remote-endpoint =
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel2_out_port0: endpoint {
remote-endpoint =
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel3_out_port0: endpoint {
remote-endpoint =
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
reg = <0x00210000 0x10000>;
ranges;
- cspi1: cspi@213000 {
+ cspi1: spi@213000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
status = "disabled";
};
- cspi2: cspi@219000 {
+ cspi2: spi@219000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
reg = <0x40000000 0x08000000>;
};
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <15>;
- hfront-porch = <8>;
- vback-porch = <12>;
- vfront-porch = <4>;
- hsync-len = <1>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_vddio_sd0: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
- };
-
- reg_lcd_3v3: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 18 0>;
- enable-active-high;
- };
- };
-
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
};
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-spi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_8bit_pins_a>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_4bit_pins_a>;
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15>;
clocks = <&clks 33>;
status = "disabled";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2>;
clocks = <&clks 33>;
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50000000 0x40000>;
ranges;
- spi3: cspi@50004000 {
+ spi3: spi@50004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- cspi1: cspi@1000e000 {
+ cspi1: spi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
status = "disabled";
};
- cspi2: cspi@1000f000 {
+ cspi2: spi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
status = "disabled";
};
- cspi3: cspi@10017000 {
+ cspi3: spi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
reg = <0x40000000 0x08000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_fec_3v3: regulator-fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 15 0>;
+ };
+
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 8 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 0>;
+ enable-active-high;
+ };
+
+ reg_can_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 13 0>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
status = "okay";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vddio_sd0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
- };
-
- reg_fec_3v3: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "fec-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 15 0>;
- };
-
- reg_usb0_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
- enable-active-high;
- };
-
- reg_usb1_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
- enable-active-high;
- };
-
- reg_lcd_3v3: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 0>;
- enable-active-high;
- };
-
- reg_can_3v3: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 13 0>;
- enable-active-high;
- };
-
- };
-
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
};
};
- backlight {
+ backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
};
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_a
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a>;
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
status = "disabled";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
status = "disabled";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
status = "disabled";
};
- ssp3: ssp@80016000 {
+ ssp3: spi@80016000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
compatible = "fsl,imx31-cspi";
reg = <0x50010000 0x4000>;
interrupts = <13>;
#clock-cells = <1>;
};
- spi3: cspi@53f84000 {
+ spi3: spi@53f84000 {
compatible = "fsl,imx31-cspi";
reg = <0x53f84000 0x4000>;
interrupts = <17>;
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
regulators {
};
ds1341: rtc@68 {
- compatible = "maxim,ds1341";
+ compatible = "dallas,ds1341";
reg = <0x68>;
};
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
&wdog1 {
status = "disabled";
};
status = "disabled";
};
- ecspi1: ecspi@70010000 {
+ ecspi1: spi@70010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@83fac000 {
+ ecspi2: spi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
- cspi: cspi@83fc0000 {
+ cspi: spi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- vpu@83ff4000 {
+ vpu: vpu@83ff4000 {
compatible = "fsl,imx51-vpu", "cnm,codahx4";
reg = <0x83ff4000 0x1000>;
interrupts = <9>;
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- num-chipselects = <1>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
status = "okay";
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
&ecspi4 {
status = "okay";
- mcp251x0: mcp251x@1 {
+ mcp251x0: mcp251x@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2018 Engicam S.r.l.
* Copyright (C) 2018 Amarula Solutions B.V.
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic-stby-poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2017 Engicam S.r.l.
* Copyright (C) 2017 Amarula Solutions B.V.
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
- model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
aips-bus@2000000 { /* AIPS1 */
spba-bus@2000000 {
- ecspi5: ecspi@2018000 {
+ ecspi5: spi@2018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
};
&iomuxc {
- /* pins used on module */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reset_moci>;
-
pinctrl_apalis_gpio1: gpio2io04grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
#include <dt-bindings/gpio/gpio.h>
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
// Copyright 2011 Linaro Ltd.
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
chosen {
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ home {
+ label = "Home";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ wakeup-source;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROGRAM>;
+ wakeup-source;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ };
+ };
+
clocks {
codec_osc: anaclk2 {
compatible = "fixed-clock";
VLC-supply = <®_audio>;
};
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ };
};
&i2c3 {
>;
};
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
>;
};
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
+ >;
+ };
+
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
#include <dt-bindings/gpio/gpio.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
sound {
compatible = "fsl,imx6-wandboard-sgtl5000",
"fsl,imx-audio-sgtl5000";
status = "okay";
};
+&snvs_rtc {
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- qspi1: qspi@21e0000 {
+ qspi1: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
status = "disabled";
};
- qspi2: qspi@21e4000 {
+ qspi2: spi@21e4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
status = "disabled";
};
- ecspi5: ecspi@228c000 {
+ ecspi5: spi@228c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+ model = "Digi International ConnectCore 6UL SBC Pro.";
+ compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm5 0 50000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&ext_3v3>;
+ status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&ext_3v3>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_master>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <26>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <1>;
+ };
+ };
+};
+
+&gpio5 {
+ emmc-usd-mux {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat0_17
+ &pinctrl_lcdif_clken
+ &pinctrl_lcdif_hvsync>;
+ lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
+ status = "okay";
+};
+
+&ldo4_ext {
+ regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm5>;
+ status = "okay";
+};
+
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&pwm8 {
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai2>;
+ pinctrl-1 = <&pinctrl_sai2_sleep>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-rates = <0>, <786432000>, <12288000>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_4wires>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2wires>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ broken-cd; /* no carrier detect line (use polling) */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ >;
+ };
+
+ pinctrl_ecspi1_master: ecspi1grp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051
+ >;
+ };
+
+ pinctrl_enet2_mdio: mdioenet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ >;
+ };
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
+ pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_lcdif_clken: lcdifctrlgrp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ >;
+ };
+
+ pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm5: pwm5grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0
+ >;
+ };
+
+ pinctrl_sai2_sleep: sai2grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000
+ >;
+ };
+
+ pinctrl_uart2_4wires: uart2grp-4wires {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_2wires: uart3grp-2wires {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
+ /* Mux selector between eMMC/SD# */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059
+ >;
+ };
+};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
};
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- bus-width = <8>;
- no-1-8-v;
status = "okay";
};
-
-&iomuxc {
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
- MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
- >;
- };
-};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
status = "okay";
};
-
-&iomuxc {
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
- >;
- };
-};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
};
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
>;
};
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
};
"pll1_sys";
arm-supply = <®_arm>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
soc {
reg = <0x02000000 0x40000>;
ranges;
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x021b0000 0x4000>;
};
+ weim: weim@21b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_EIM>;
+ fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
+ };
+
ocotp: ocotp-ctrl@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
tempmon_temp_grade: temp-grade@20 {
reg = <0x20 4>;
};
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
lcdif: lcdif@21c8000 {
status = "disabled";
};
- qspi: qspi@21e0000 {
+ qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
#include "imx6ul-14x14-evk.dtsi"
/ {
- model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+ model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
};
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0
#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
>;
fsl,soc-operating-points = <
/* KHz uV */
- 900000 1175000
+ 900000 1250000
792000 1175000
528000 1175000
396000 1175000
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
label = "Volume Up";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
reg = <1>;
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * Reference manual lists pci irqs incorrectly
+ * Real hardware ordering is same as imx6: D+MSI, C, B, A
+ */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 NXP Semiconductors.
* Author: Fabio Estevam <fabio.estevam@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep_wait: cpu-sleep-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <50>;
+ min-residency-us = <1000>;
+ };
+ };
+
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clock-frequency = <792000000>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
+ ca_funnel_in_ports: in-ports {
+ port {
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port@2 {
- reg = <0>;
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port@2 {
- reg = <0>;
+ out-ports {
+ port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clock-names = "snvs-rtc";
};
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- value = <0x60>;
- mask = <0x60>;
- };
-
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
status = "disabled";
};
- ecspi4: ecspi@30630000 {
+ ecspi4: spi@30630000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30800000 0x100000>;
ranges;
- ecspi1: ecspi@30820000 {
+ ecspi1: spi@30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@30830000 {
+ ecspi2: spi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@30840000 {
+ ecspi3: spi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
+ mu0a: mailbox@30aa0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu0b: mailbox@30ab0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30ab0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ fsl,mu-side-b;
+ status = "disabled";
+ };
+
usbotg1: usb@30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
#define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1
#define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1
#define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1
#define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0
#define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1
#define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1
#define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1
#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1
#define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1
#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1
#define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1
#define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1
#define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1
#define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1
#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1
#define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1
#define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3
#define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2
#define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2
#define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2
#define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2
#define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2
#define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1
#define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2
#define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2
#define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2
#define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2
#define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2
#define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2
#define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2
#define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2
#define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0
#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3
#define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3
#define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3
clock-frequency = <100000000>;
};
-&pciec {
- status = "okay";
-};
-
&pfc {
can0_pins: can0 {
groups = "can0_data_d";
clock-names = "fck", "mmchsdb_fck";
};
- qspi: qspi@2940000 {
+ qspi: spi@2940000 {
compatible = "ti,k2g-qspi", "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
* ssp0 and spi1 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp0: ssp@20084000 {
+ ssp0: spi@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
* ssp1 and spi2 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp1: ssp@2008c000 {
+ ssp1: spi@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
big-endian;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
};
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 39>, <&edma0 1 38>;
status = "disabled";
};
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 37>, <&edma0 1 36>;
status = "disabled";
};
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 35>, <&edma0 1 34>;
status = "disabled";
};
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+ model = "Endless Computers Endless Mini";
+ compatible = "endless,ec100", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ pal-switch {
+ label = "pal";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+ };
+
+ ntsc-switch {
+ label = "ntsc";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ /*
+ * shutdown is managed by the EC (embedded micro-controller)
+ * which is configured through GPIOAO_2 (poweroff GPIO) and
+ * GPIOAO_7 (power LED, which has to go LOW as well).
+ */
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ timeout-ms = <20000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "ec100:red:power";
+ /*
+ * Needs to go LOW (together with the poweroff GPIO)
+ * during shutdown to allow the EC (embedded
+ * micro-controller) to shutdown the system. Setting
+ * the output to LOW signals the EC to start a
+ * "breathing"/pulsing effect until the power is fully
+ * turned off.
+ */
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC5V";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwms = <&pwm_cd 0 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOH_4 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101A/G (0x02430c54) */
+ reg = <0>;
+ };
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+
+ rt5640: codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+ realtek,in1-differential;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+ status = "okay";
+ pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
mmc0 = &sd_card_slot;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x40000000>;
};
};
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
/*
* signal name from schematics: TF_3V3N_1V8_EN
*/
states = <3300000 0
1800000 1>;
};
+
+ vcc_1v8: regulator-vcc-1v8 {
+ /*
+ * RICHTEK RT9179 configured for a fixed output voltage of
+ * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+ * VDD1V8 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 3.3V. This supplies not only VCC3V3 but
+ * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcck: regulator-vcck {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 0 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddc_ddr: regulator-vddc-ddr {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 1.5V. This supplies not only DDR_VDDC but
+ * also DDR3_1V5 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "DDR_VDDC";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vdd_rtc: regulator-vdd-rtc {
+ /*
+ * Torex Semiconductor XC6215 configured for a fixed output of
+ * 0.9V.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
};
ðmac {
pinctrl-names = "default";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
&sdio {
status = "okay";
};
};
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
};
};
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+
+ i2c_a_pins: i2c-a {
+ mux {
+ groups = "i2c_sda_a", "i2c_sck_a";
+ function = "i2c_a";
+ };
+ };
+
sd_b_pins: sd-b {
mux {
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
function = "sd_b";
};
};
+
+ pwm_c1_pins: pwm-c1 {
+ mux {
+ groups = "pwm_c1";
+ function = "pwm_c";
+ };
+ };
+
+ uart_b0_pins: uart-b0 {
+ mux {
+ groups = "uart_tx_b0",
+ "uart_rx_b0";
+ function = "uart_b";
+ };
+ };
+
+ uart_b0_cts_rts_pins: uart-b0-cts-rts {
+ mux {
+ groups = "uart_cts_b0",
+ "uart_rts_b0";
+ function = "uart_b";
+ };
+ };
};
};
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
status = "disabled";
};
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
dma-names = "tx", "rx";
};
- mcspi1: mcspi@48098000 {
+ mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
"tx2", "rx2", "tx3", "rx3";
};
- mcspi2: mcspi@4809a000 {
+ mcspi2: spi@4809a000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
ti,timer-alwon;
};
- mcspi3: mcspi@480b8000 {
+ mcspi3: spi@480b8000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi3";
reg = <0x480b8000 0x100>;
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
/dts-v1/;
#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "OMAP3 GTA04";
aliases {
display0 = &lcd;
+ display1 = &tv0;
};
/* fixed 26MHz oscillator */
aux-button {
label = "aux";
- linux,code = <169>;
+ linux,code = <KEY_PHONE>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
+ antenna-detect {
+ compatible = "gpio-keys";
+
+ gps_antenna_button: gps-antenna-button {
+ label = "GPS_EXT_ANT";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEIN_INSERT>;
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
sound {
compatible = "ti,omap-twl4030";
ti,model = "gta04";
ti,mcbsp = <&mcbsp2>;
};
- /* GSM audio */
+ /* GSM audio */
sound_telephony {
compatible = "simple-audio-card";
simple-audio-card,name = "GTA04 voice";
#sound-dai-cells = <0>;
};
- spi_lcd {
+ spi_lcd: spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
};
tv0: connector {
- compatible = "svideo-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
ports {
#address-cells = <1>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux_mcbsp1@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
+ /* devconf1 setup for tvout pins */
+ pinmux_tv_out@480022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
};
&omap3_pmx_core {
>;
};
- backlight_pins: backlight_pins_pimnux {
+ backlight_pins: backlight_pins_pinmux {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
+ pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
>;
};
+ bmp085_pins: pinmux_bmp085_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+ >;
+ };
+
bma180_pins: pinmux_bma180_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
>;
};
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
+
+ camera_pins: pinmux_camera_pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ /* mcbsp_clks is used as PENIRQ */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */
+ >;
+ };
+
+ mcbsp4_pins: pinmux_mcbsp4_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */
+ >;
+ };
};
&omap3_pmx_core2 {
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bmp085_pins>;
interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
};
reg = <0x4>;
};
- wifi_reset: wifi_reset@6 {
+ wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
reg = <0x6>;
compatible = "gpio";
};
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
};
/* RFID EEPROM */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
ti,non-removable;
+ broken-cd; /* hardware has no CD */
};
&mmc2 {
status = "disabled";
};
+#define BIT(x) (1 << (x))
+&twl_gpio {
+ /* pullups: BIT(2) */
+ ti,pullups = <BIT(2)>;
+ /*
+ * pulldowns:
+ * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
&twl_keypad {
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&charger {
&vaux2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ regulator-always-on; /* we should never switch off while vio is on! */
};
/* camera */
regulator-max-microvolt = <3150000>;
};
+/* Needed to power the DPI pins */
+
+&vpll2 {
+ regulator-always-on;
+};
+
&dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
vdda-supply = <&vdac>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port {
+ reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
- ti,channels = <2>;
+ ti,channels = <1>;
ti,invert-polarity;
};
};
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpmc,sync-clk-ps = <0>;
+ gpmc,device-width = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
+ gpmc,we-off-ns = <40>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
-
- #address-cells = <1>;
- #size-cells = <1>;
+ gpmc,sync-clk-ps = <0>;
x-loader@0 {
label = "X-Loader";
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <0x80000 0x1c0000>;
};
- bootloaders_env@260000 {
+ bootloaders_env@240000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <0x240000 0x40000>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <0x280000 0x600000>;
};
- filesystem@680000 {
+ filesystem@880000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
};
};
};
-&mcbsp2 {
- status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp4_pins>;
};
&hdqw1w {
pinctrl-0 = <&hdq_pins>;
};
-&mcbsp4 {
- status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+ ports {
+ port@0 {
+ reg = <0>;
+ parallel_ep: endpoint {
+ ti,isp-clock-divisor = <1>;
+ ti,strobe-mode;
+ bus-width = <8>;/* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <1>; /* Active high */
+ data-active = <1>;/* Active high */
+ pclk-sample = <1>;/* Falling */
+ };
+ };
+ /* port@1 and port@2 are not used by GTA04 */
+ };
};
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A3";
+ model = "Goldelico GTA04A3/Letux 2804";
};
&i2c2 {
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A4";
+ model = "Goldelico GTA04A4/Letux 2804";
};
/*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A5";
+ model = "Goldelico GTA04A5/Letux 2804";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ };
+
+ wlan_en: wlan_en_regulator {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pps_pins>;
+
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+ };
+
+};
+
+&gpio5 {
+ irda_en {
+ gpio-hog;
+ gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+ output-high; /* activate gpio_175 to disable IrDA receiver */
+ };
+};
+
+&omap3_pmx_core {
+ bt_pins: pinmux_bt_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+ >;
+ };
+
+ wlan_irq_pin: pinmux_wlan_irq_pin {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+ >;
+ };
+
+ irda_pins: pinmux_irda {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
+ >;
+ };
+
+ pps_pins: pinmux_pps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+ >;
+ };
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+ /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ cap-power-off-card;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_irq_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ mmc-pwrseq;
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ /delete-node/ bmp085@77;
+ /delete-node/ bma180@41;
+ /delete-node/ itg3200@68;
+ /delete-node/ hmc5843@1e;
+
+ bmg160@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ };
+
+ bmc150@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ };
+
+ bmc150@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+ };
+
+ bme280@76 {
+ compatible = "bosch,bme280";
+ reg = <0x76>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+ model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+};
+
+&gpmc {
+ /* switch inherited setup to OneNAND */
+
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /delete-node/ nand@0,0;
+
+ onenand@0,0 {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <87>;
+ gpmc,cs-wr-off-ns = <87>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <87>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <87>;
+ gpmc,rd-cycle-ns = <112>;
+ gpmc,wr-cycle-ns = <112>;
+ gpmc,access-ns = <81>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <81>;
+ gpmc,sync-clk-ps = <15000>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+
+ bootloaders_env@240000 {
+ label = "U-Boot Env";
+ reg = <0x240000 0x40000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x600000>;
+ };
+
+ filesystem@880000 {
+ label = "File System";
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+
+ };
+};
};
&i2c3 {
- ak8975@0f {
+ ak8975@f {
compatible = "asahi-kasei,ak8975";
reg = <0x0f>;
};
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
- non-removable;
+ ti,non-removable;
};
&mmc3 {
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-};
-
-&omap4_pmx_wkup {
- usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
- /* gpio_wk0 */
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
- >;
- };
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
};
};
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
vbus-supply = <&smps10_out1_reg>;
};
+&dwc3 {
+ dr_mode = "otg";
+};
+
&mcspi1 {
};
&i2c {
status = "okay";
- rtc {
+ rtc@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Cubietech CubieBoard6
*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* LeMaker Guitar SoM
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include "owl-s500.dtsi"
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Actions Semi S500 SoC
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#pwm-cells = <1>;
clocks = <&clks CLK_PWM1>;
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
timer@40a00000 {
clocks = <&clks CLK_PWM1>;
};
- pwri2c: i2c@40f000180 {
+ pwri2c: i2c@40f00180 {
compatible = "mrvl,pxa-i2c";
reg = <0x40f00180 0x24>;
interrupts = <6>;
status = "disabled";
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
clocks {
#include "skeleton.dtsi"
#include "dt-bindings/clock/pxa-clock.h"
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ }
+#define PMMUX_LPM_LOW(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-disable; \
+ }
+#define PMMUX_LPM_HIGH(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-enable; \
+ }
+
/ {
model = "Marvell PXA2xx family SoC";
compatible = "marvell,pxa2xx";
};
};
- ffuart: uart@40100000 {
+ ffuart: serial@40100000 {
compatible = "mrvl,pxa-uart";
reg = <0x40100000 0x30>;
interrupts = <22>;
status = "disabled";
};
- btuart: uart@40200000 {
+ btuart: serial@40200000 {
compatible = "mrvl,pxa-uart";
reg = <0x40200000 0x30>;
interrupts = <21>;
status = "disabled";
};
- stuart: uart@40700000 {
+ stuart: serial@40700000 {
compatible = "mrvl,pxa-uart";
reg = <0x40700000 0x30>;
interrupts = <20>;
status = "disabled";
};
- hwuart: uart@41100000 {
+ hwuart: serial@41100000 {
compatible = "mrvl,pxa-uart";
reg = <0x41100000 0x30>;
interrupts = <7>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 716000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-48000000 {
+ opp-hz = /bits/ 64 <48000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-716000000 {
+ opp-hz = /bits/ 64 <716000000>;
+ clock-latency-ns = <256000>;
+ };
};
pmu {
status = "disabled";
};
- acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
- };
+ acc0: clock-controller@b088000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+ };
- acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
- };
+ acc1: clock-controller@b098000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+ };
- acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc2: clock-controller@b0a8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+ };
- acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc3: clock-controller@b0b8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+ };
- saw0: regulator@b089000 {
- compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ saw0: regulator@b089000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
- };
+ };
- saw1: regulator@b099000 {
- compatible = "qcom,saw2";
- reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw1: regulator@b099000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw2: regulator@b0a9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw2: regulator@b0a9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw3: regulator@b0b9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw3: regulator@b0b9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
#size-cells = <2>;
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";
#include "qcom-ipq8064-v1.0.dtsi"
/ {
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
+ model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+ compatible = "qcom,ipq8064-ap148";
soc {
pinmux@800000 {
bias-disable;
};
- spi_pins: spi_pins {
+ buttons_pins: buttons_pins {
mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
+ pins = "gpio54", "gpio65";
+ drive-strength = <2>;
+ bias-pull-up;
};
};
};
gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
+ i2c@16380000 {
status = "ok";
- };
-
- i2c4: i2c@16380000 {
- status = "ok";
-
clock-frequency = <200000>;
-
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partition@0 {
- label = "rootfs";
- reg = <0x0 0x1000000>;
- };
-
- partition@1 {
- label = "scratch";
- reg = <0x1000000 0x1000000>;
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- ports-implemented = <0x1>;
- status = "ok";
- };
};
};
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+
+ serial@16340000 {
+ status = "ok";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "rootfs";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1 {
+ label = "scratch";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+ };
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ ports-implemented = <0x1>;
+ status = "ok";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ button@2 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led@7 {
+ label = "led_usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@8 {
+ label = "led_usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@9 {
+ label = "status_led_fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@26 {
+ label = "sata_led";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@53 {
+ label = "status_led_pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+ };
+};
/dts-v1/;
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie1_pins: pcie1_pinmux {
+ mux {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie2_pins: pcie2_pinmux {
+ mux {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ buttons_pins: buttons_pins {
+ mux {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
intc: interrupt-controller@2000000 {
#reset-cells = <1>;
};
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie1: pci@1b700000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b700000 0x1000
+ 0x1b702000 0x80
+ 0x1b800000 0x100
+ 0x31f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_1_A_CLK>,
+ <&gcc PCIE_1_H_CLK>,
+ <&gcc PCIE_1_PHY_CLK>,
+ <&gcc PCIE_1_AUX_CLK>,
+ <&gcc PCIE_1_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_1_ACLK_RESET>,
+ <&gcc PCIE_1_HCLK_RESET>,
+ <&gcc PCIE_1_POR_RESET>,
+ <&gcc PCIE_1_PCI_RESET>,
+ <&gcc PCIE_1_PHY_RESET>,
+ <&gcc PCIE_1_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie2: pci@1b900000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b900000 0x1000
+ 0x1b902000 0x80
+ 0x1ba00000 0x100
+ 0x35f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_2_A_CLK>,
+ <&gcc PCIE_2_H_CLK>,
+ <&gcc PCIE_2_PHY_CLK>,
+ <&gcc PCIE_2_AUX_CLK>,
+ <&gcc PCIE_2_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_2_ACLK_RESET>,
+ <&gcc PCIE_2_HCLK_RESET>,
+ <&gcc PCIE_2_POR_RESET>,
+ <&gcc PCIE_2_PCI_RESET>,
+ <&gcc PCIE_2_PHY_RESET>,
+ <&gcc PCIE_2_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+ };
+
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdcc1bam:dma@12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc3bam:dma@12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ #mmc-ddr-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+ };
};
};
bias-pull-up;
};
};
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mpu6515_pin: mpu6515 {
+ irq {
+ pins = "gpio73";
+ function = "gpio";
+ bias-disable;
+ input-enable;
+ };
+ };
};
sdhci@f9824900 {
linux,code = <KEY_VOLUMEDOWN>;
};
};
+
+ i2c@f9968000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ mpu6515@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+ interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+ vddio-supply = <&pm8941_lvs1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6515_pin>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ak8963@f {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0f>;
+ // Currently only works in polling mode.
+ // gpios = <&msmgpio 61 0>;
+ vid-supply = <&pm8941_lvs1>;
+ vdd-supply = <&pm8941_l17>;
+ };
+
+ bmp280@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ vdda-supply = <&pm8941_lvs1>;
+ vddd-supply = <&pm8941_l17>;
+ };
+ };
+ };
+ };
+
+ i2c@f9925000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ avago_apds993@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+ interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <0>;
+ };
+ };
};
&spmi_bus {
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 7 0xf04>;
+ interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
- interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
- interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
adsp_smsm: adsp@2 {
reg = <2>;
- interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
wcnss_smsm: wcnss@7 {
reg = <7>;
- interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
frame@f9021000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
- interrupts = <0 107 0x0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
- <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
- interrupts = <0 96 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
+ blsp_i2c3: i2c@f9925000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9925000 0x1000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c8: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
- interrupts = <0 102 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
- interrupts = <0 105 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
dma-names = "tx", "rx";
};
+ blsp_i2c12: i2c@f9968000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9968000 0x1000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
compatible = "qcom,smd";
adsp {
- interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
modem {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
};
rpm {
- interrupts = <0 168 1>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
phy3: ethernet-phy@3 {
reg = <3>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
};
};
clock-frequency = <20000000>;
};
+&pfc {
+ scif1_pins: scif1 {
+ groups = "scif1_data_b";
+ function = "scif1";
+ };
+};
+
&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
/ {
compatible = "renesas,r8a77470";
#address-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+ next-level-cache = <&L2_CA7>;
+ };
L2_CA7: cache-controller-0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77470_PD_CA7_SCU>;
};
};
#size-cells = <2>;
ranges;
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a77470";
+ reg = <0 0xe6060000 0 0x118>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77470-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
#reset-cells = <1>;
};
+ apmu@e6151000 {
+ compatible = "renesas,r8a77470-apmu", "renesas,apmu";
+ reg = <0 0xe6151000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
rst: reset-controller@e6160000 {
compatible = "renesas,r8a77470-rst";
reg = <0 0xe6160000 0 0x100>;
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
reg = <0 0xe6300000 0 0x20000>;
};
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 719>;
status = "disabled";
};
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 718>;
status = "disabled";
};
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 715>;
status = "disabled";
};
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 714>;
status = "disabled";
};
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77470",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee160000 0 0x328>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Reference Device Tree Source for the Bock-W board
+ * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7778
+ * Device Tree Source for the R-Car M1A (R8A77781) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Marzen board
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7779
+ * Device Tree Source for the R-Car H1 (R8A77790) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
sata: sata@fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
- reg = <0xfc600000 0x2000>;
+ reg = <0xfc600000 0x200000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
rtc {
compatible = "dlg,da9063-rtc";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7790 SoC
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
*
* Copyright (C) 2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7791 SoC
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
*
* Copyright (C) 2013-2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7792 SoC
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
*
* Copyright (C) 2016 Cogent Embedded Inc.
*/
du: display@feb00000 {
compatible = "renesas,du-r8a7792";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
compatible = "dlg,da9063-watchdog";
};
};
+
+ vdd_dvfs: regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&i2c4 {
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7793 SoC
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
*/
clock-frequency = <400000>;
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7794 SoC
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014 Ulrich Hecht
du: display@feb00000 {
compatible = "renesas,du-r8a7794";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a06g032-sysctrl.h>
/ {
compatible = "renesas,r9a06g032";
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <1>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
enable-method = "renesas,r9a06g032-smp";
cpu-release-addr = <0 0x4000c204>;
};
};
uart0: serial@40060000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
reg = <0x40060000 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&sysctrl 146>;
- clock-names = "baudclk";
+ clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: serial@40061000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40061000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@40062000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40062000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: serial@50000000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50000000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: serial@50001000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50001000 0x400>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart5: serial@50002000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50002000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart6: serial@50003000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50003000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart7: serial@50004000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50004000 0x400>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
status = "disabled";
};
/* no rts / cts for uart2 */
};
- spi {
+ spi-pins {
spi_txd:spi-txd {
rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
};
};
+ sd0 {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop0_out>, <&vop1_out>;
+ };
+
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x8000>;
};
};
+ vop0: vop@1010c000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010c000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop0_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vop1: vop@1010e000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010e000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop1_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
timer3: timer@2000e000 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
};
};
+ lcdc1 {
+ lcdc1_dclk: lcdc1-dclk {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_den: lcdc1-den {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_hsync: lcdc1-hsync {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_vsync: lcdc1-vsync {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_rgb24: ldcd1-rgb24 {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ max-frequency = <150000000>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
/dts-v1/;
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
/ {
- model = "Rockchip RK3288 Tinker Board";
+ model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- button@0 {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
- };
-
- heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
- };
-
- pwr-led {
- gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vcc33_lan>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
- <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc18_ldo1: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_ldo1";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_mipi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_codec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc33_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
- &pcfg_pull_up>;
- };
-
- dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
- &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc18_ldo1>;
- status ="okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status= "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
interrupts = <30>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
+ compatible = "samsung,s5pv210-wakeup-eint";
interrupts = <16>;
interrupt-parent = <&vic0>;
};
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
serial1 = &uart3;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2s0 = &i2s0;
+ i2s1 = &i2s1;
};
cpus {
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
};
};
- nand0: nand@80000000 {
- compatible = "atmel,sama5d2-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = < /* EBI CS3 */
- 0x80000000 0x08000000
- /* SMC PMECC regs */
- 0xf8014070 0x00000490
- /* SMC PMECC Error Location regs */
- 0xf8014500 0x00000200
- /* ROM Galois tables */
- 0x00040000 0x00018000
- >;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- atmel,nand-has-dma;
- atmel,has-pmecc;
- atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
- status = "disabled";
-
- nfc@c0000000 {
- compatible = "atmel,sama5d3-nfc";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = < /* NFC Command Registers */
- 0xc0000000 0x08000000
- /* NFC HSMC regs */
- 0xf8014000 0x00000070
- /* NFC SRAM banks */
- 0x00100000 0x00100000
- >;
- clocks = <&hsmc_clk>;
- atmel,write-by-sram;
- };
- };
-
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
atmel,clk-output-range = <0 100000000>;
};
};
+
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };
};
qspi0: spi@f0020000 {
clocks = <&clk32k>;
};
+ i2s0: i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s0muxck>;
+ assigned-clock-parents = <&i2s0_gclk>;
+ status = "disabled";
+ };
+
can0: can@f8054000 {
compatible = "bosch,m_can";
reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
status = "disabled";
};
status = "disabled";
};
+ i2s1: i2s@fc04c000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s1muxck>;
+ assigned-parrents = <&i2s1_gclk>;
+ status = "disabled";
+ };
+
can1: can@fc050000 {
compatible = "bosch,m_can";
reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
};
};
- rstc@fc068600 {
+ reset_controller: rstc@fc068600 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
clocks = <&clk32k>;
};
- shdwc@fc068610 {
+ shutdown_controller: shdwc@fc068610 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfc068610 0x10>;
clocks = <&clk32k>;
clocks = <&h32ck>;
};
- watchdog@fc068640 {
+ watchdog: watchdog@fc068640 {
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
};
- pinctrl@fc06a000 {
+ pinctrl: pinctrl@fc06a000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ste-ab8500.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output ports */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
};
prcmu: prcmu@80157000 {
- compatible = "stericsson,db8500-prcmu";
+ compatible = "stericsson,db8500-prcmu", "syscon";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
mcde {
lcd_default_mode: lcd_default {
- default_mux {
+ default_mux1 {
/* Mux in VSI0 and all the data lines */
function = "lcd";
groups =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
- "lcdaclk_b_1", /* Clock line for TV-out */
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
+ default_mux2 {
+ function = "lcda";
+ groups =
+ "lcdaclk_b_1"; /* Clock line for TV-out */
+ };
default_cfg1 {
pins =
"GPIO68_E1", /* VSI0 */
/ {
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2260";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* DAC */
format = "i2s";
mclk-fs = <128>;
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2120";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* HDMI */
format = "i2s";
mclk-fs = <128>;
};
};
- simple-audio-card,dai-link1 {
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
/* DAC */
format = "i2s";
mclk-fs = <256>;
};
};
- simple-audio-card,dai-link2 {
+ simple-audio-card,dai-link@2 {
+ reg = <2>;
/* SPDIF */
format = "left_j";
mclk-fs = <128>;
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_pins_od>;
clock-frequency = <0>;
};
- clk-lse {
+ clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_a>;
pinctrl-1 = <&sdio_pins_od_a>;
&sdio2 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_b>;
interrupt-parent = <&exti>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "alarm";
- st,syscfg = <&pwrcfg>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
/dts-v1/;
#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
serial0 = &uart4;
ethernet0 = ðernet0;
};
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+ default-on;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cec_pins_a>;
+ status = "okay";
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ backlight = <&panel_backlight>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
};
ðernet0 {
};
};
-&cec {
- pinctrl-names = "default";
- pinctrl-0 = <&cec_pins_a>;
- status = "okay";
-};
-
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&m_can1 {
pinctrl-names = "default";
pinctrl-0 = <&m_can1_pins_a>;
dma-requests = <48>;
};
- qspi: qspi@58003000 {
+ qspi: spi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
*/
clock-frequency = <400000>;
- touchscreen: touchscreen {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
pinctrl-names = "default";
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun5i-a13-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <53>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-a33-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
reg = <0x1f01c00 0x400>;
};
+ r_cir: ir@1f02000 {
+ compatible = "allwinner,sun8i-a83t-ir",
+ "allwinner,sun5i-a13-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x400>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_cir_pin>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupt-controller;
#interrupt-cells = <3>;
+ r_cir_pin: r-cir-pin {
+ pins = "PL12";
+ function = "s_cir_rx";
+ };
+
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H3";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
/dts-v1/;
#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-bananapi-m2-plus.dtsi"
/ {
- model = "Banana Pi BPI-M2-Plus";
+ model = "Banana Pi BPI-M2-Plus H3";
compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-
- pwr_led {
- label = "bananapi-m2-plus:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-
- sw4 {
- label = "power";
- linux,code = <BTN_0>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- };
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
- interrupt-names = "host-wake";
- };
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-®_usb0_vbus {
- gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- usb0_vbus-supply = <®_usb0_vbus>;
- /* USB host VBUS is on as long as VCC-IO is on */
- status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Zero Plus2 H3";
+ compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc {
system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-h3-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mali: gpu@1c40000 {
compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
};
};
+&ahci {
+ ahci-supply = <®_dldo4>;
+ phy-supply = <®_eldo3>;
+ status = "okay";
+};
+
&de {
status = "okay";
};
&mmc0 {
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
- cd-inverted;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
status = "okay";
};
regulator-name = "vcc-wifi";
};
+®_dldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
&tcon_tv0 {
status = "okay";
};
#size-cells = <0>;
};
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ resets-name = "ahci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ };
+
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
*/
clock-frequency = <400000>;
- touchscreen: touchscreen@0 {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
pinctrl-names = "default";
&i2c0 {
status = "okay";
- axp22x: pmic@68 {
+ axp22x: pmic@34 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
};
};
- r_rsb: i2c@8003400 {
+ r_rsb: rsb@8003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+ /*
+ * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+ * resistance on the CPU regulator's feedback pin.
+ */
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpux>;
+};
--- /dev/null
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+
+ pwr_led {
+ label = "bananapi-m2-plus:red:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+
+ sw4 {
+ label = "power";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ /* USB host VBUS is on as long as VCC-IO is on */
+ status = "okay";
+};
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
/*
* GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c400 {
+ i2c@7000c400 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <®_5v0>;
+ target-12v-supply = <®_12v0>;
};
hda@70030000 {
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
/ {
model = "Toradex Apalis TK1 on Apalis Evaluation Board";
compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
- "toradex,apalis-tk1", "nvidia,tegra124";
+ "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+ "nvidia,tegra124";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
* I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
* (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <®_5v0>;
+ target-12v-supply = <®_12v0>;
};
hda@70030000 {
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
* Compatible for Revisions 2GB: V1.2A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
- "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <®_3v3>;
- hvdd-pex-supply = <®_3v3>;
- vddio-pex-ctl-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pex-pll-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <®_module_3v3>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <®_1v05_avdd_hdmi_pll>;
- vdd-supply = <®_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v05_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <®_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis GPIO */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C4 (DDC) */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBH_EN */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vddio>;
+ VDDIO-supply = <®_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
};
regulators {
- vsup-sd2-supply = <®_3v3>;
- vsup-sd3-supply = <®_3v3>;
- vsup-sd4-supply = <®_3v3>;
- vsup-sd5-supply = <®_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <®_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <®_3v3>;
- vin-ldo9-10-supply = <®_3v3>;
- vin-ldo11-supply = <®_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <®_module_3v3>;
+ vsup-sd3-supply = <®_module_3v3>;
+ vsup-sd4-supply = <®_module_3v3>;
+ vsup-sd5-supply = <®_module_3v3>;
+ vin-ldo0-supply = <®_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <®_module_3v3>;
+ vin-ldo2-5-7-supply = <®_1v8_vddio>;
+ vin-ldo3-4-supply = <®_module_3v3>;
+ vin-ldo9-10-supply = <®_module_3v3>;
+ vin-ldo11-supply = <®_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <®_module_3v3>;
};
};
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <®_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <®_1v05_vdd>;
+ hvdd-supply = <®_module_3v3>;
+ vddio-supply = <®_1v05_vdd>;
};
usb@70090000 {
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <®_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <®_3v3>;
- hvdd-usb-ss-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ avdd-pll-utmip-supply = <®_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <®_1v05_vdd>;
+ avdd-usb-supply = <®_module_3v3>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <®_module_3v3>;
+ hvdd-usb-ss-supply = <®_module_3v3>;
};
padctl@7009f000 {
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <®_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <®_usbo1_vbus>;
};
};
};
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
ahub@70300000 {
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
};
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <®_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
vin-supply = <®_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
* Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1", "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <®_3v3>;
- hvdd-pex-supply = <®_3v3>;
- vddio-pex-ctl-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pex-pll-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <®_module_3v3>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <®_1v05_avdd_hdmi_pll>;
- vdd-supply = <®_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v05_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <®_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis GPIO */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C2 (DDC) */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBH_EN */
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBO1_EN */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vddio>;
+ VDDIO-supply = <®_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
};
regulators {
- vsup-sd2-supply = <®_3v3>;
- vsup-sd3-supply = <®_3v3>;
- vsup-sd4-supply = <®_3v3>;
- vsup-sd5-supply = <®_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <®_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <®_3v3>;
- vin-ldo9-10-supply = <®_3v3>;
- vin-ldo11-supply = <®_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <®_module_3v3>;
+ vsup-sd3-supply = <®_module_3v3>;
+ vsup-sd4-supply = <®_module_3v3>;
+ vsup-sd5-supply = <®_module_3v3>;
+ vin-ldo0-supply = <®_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <®_module_3v3>;
+ vin-ldo2-5-7-supply = <®_1v8_vddio>;
+ vin-ldo3-4-supply = <®_module_3v3>;
+ vin-ldo9-10-supply = <®_module_3v3>;
+ vin-ldo11-supply = <®_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <®_module_3v3>;
};
};
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <®_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <®_1v05_vdd>;
+ hvdd-supply = <®_module_3v3>;
+ vddio-supply = <®_1v05_vdd>;
};
usb@70090000 {
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <®_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <®_3v3>;
- hvdd-usb-ss-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ avdd-pll-utmip-supply = <®_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <®_1v05_vdd>;
+ avdd-usb-supply = <®_module_3v3>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <®_module_3v3>;
+ hvdd-usb-ss-supply = <®_module_3v3>;
};
padctl@7009f000 {
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <®_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <®_usbo1_vbus>;
};
};
};
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
ahub@70300000 {
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
};
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <®_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
vin-supply = <®_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri T20 on Colibri Evaluation Board";
+ compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+ "nvidia,tegra20";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartd;
+ serial2 = &uartb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <®_5v0>;
+ };
+ };
+
+ pinmux@70000014 {
+ state_default: pinmux {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-a {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ usbh-pen {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Colibri UART-A */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
+ status = "okay";
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+ usb@c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <®_usbc_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <®_3v3>;
+ xceiver-supply = <®_5v0>;
+ };
+ };
+
+ /* SD/MMC */
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
+ };
+};
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20-colibri.dtsi"
/ {
- model = "Toradex Colibri T20 256/512 MB on Iris";
- compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+ model = "Toradex Colibri T20 on Iris";
+ compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+ "nvidia,tegra20";
aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartd;
+ serial2 = &uartb;
};
chosen {
};
host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
pinmux@70000014 {
state_default: pinmux {
- hdint {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- i2cddc {
+ uart-a {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdio4 {
+ uart-b {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uarta {
+ uart-c {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uartd {
+ usbh-pen {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
serial@70006300 {
status = "okay";
};
- i2c_ddc: i2c@7000c400 {
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
status = "okay";
};
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@c5000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
+ vbus-supply = <®_usbc_vbus>;
};
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
};
+ /* SD/MMC */
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
- vmmc-supply = <&vcc_sd_reg>;
- vqmmc-supply = <&vcc_sd_reg>;
- };
-
- regulators {
- regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
- };
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
- vcc_sd_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
};
};
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
+ };
};
// SPDX-License-Identifier: GPL-2.0
#include "tegra20.dtsi"
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
/ {
- model = "Toradex Colibri T20 256/512 MB";
- compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
- aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
- rtc1 = "/rtc@7000e000";
- };
-
memory@0 {
/*
* Set memory to 256 MB to be safe as this could be used on
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
-
- nvidia,ddc-i2c-bus = <&i2c_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
pinctrl-0 = <&state_default>;
state_default: pinmux {
- audio_refclk {
+ /* Analogue Audio AC97 to WM9712 (On-module) */
+ audio-refclk {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- crt {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- displaya {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3",
- "ld4", "ld5", "ld6", "ld7", "ld8",
- "ld9", "ld10", "ld11", "ld12", "ld13",
- "ld14", "ld15", "ld16", "ld17",
- "lhs", "lpw0", "lpw2", "lsc0",
- "lsc1", "lsck", "lsda", "lspi", "lvs";
- nvidia,function = "displaya";
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
- gpio_dte {
- nvidia,pins = "dte";
- nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
- gpio_gmi {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap1", "dap2", "dap4", "gpu", "irrx",
- "irtx", "spia", "spib", "spic";
- nvidia,function = "gmi";
+
+ /*
+ * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+ * (All on-module), SODIMM Pin 45 Wakeup
+ */
+ gpio-uac {
+ nvidia,pins = "uac";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_pta {
+
+ /*
+ * Buffer Enables for nPWE and RDnWR (On-module,
+ * see GPIO hogging further down below)
+ */
+ gpio-pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_uac {
- nvidia,pins = "uac";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+
+ /*
+ * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+ * SYS_CLK_REQ (All on-module)
+ */
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- hdint {
- nvidia,pins = "hdint";
+
+ /*
+ * Colibri Address/Data Bus (GMI)
+ * Note: spid and spie optionally used for SPI1
+ */
+ gmi {
+ nvidia,pins = "atc", "atd", "ate", "dap1",
+ "dap2", "dap4", "gmd", "gpu",
+ "irrx", "irtx", "spia", "spib",
+ "spic", "spid", "spie", "uca",
+ "ucb";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ gmi-gpio1 {
+ nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
nvidia,function = "hdmi";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c1 {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ gmi-gpio2 {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+ nvidia,function = "rsvd4";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c3 {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
+
+ /* Colibri BL_ON */
+ bl-on {
+ nvidia,pins = "dta";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cddc {
+
+ /* Colibri Backlight PWM<A>, PWM<B> */
+ pwm-a-b {
+ nvidia,pins = "sdc";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri DDC */
+ ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
+
+ /*
+ * Colibri EXT_IO*
+ * Note: dtf optionally used for I2C3
+ */
+ ext-io {
+ nvidia,pins = "dtf", "spdi";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- irda {
- nvidia,pins = "uad";
- nvidia,function = "irda";
+
+ /*
+ * Colibri Ethernet (On-module)
+ * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+ */
+ ulpi {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- nand {
- nvidia,pins = "kbca", "kbcc", "kbcd",
- "kbce", "kbcf";
- nvidia,function = "nand";
+ ulpi-refclk {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- owc {
- nvidia,pins = "owc";
- nvidia,function = "owr";
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hotplug-detect {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ i2c {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+
+ /*
+ * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+ * today's display need DE, disable LCD_M1
+ */
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pwm {
- nvidia,pins = "sdb", "sdc", "sdd";
- nvidia,function = "pwm";
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+ "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11",
+ "ld12", "ld13", "ld14", "ld15",
+ "ld16", "ld17", "lhs", "lsc0",
+ "lspi", "lvs";
+ nvidia,function = "displaya";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- sdio4 {
- nvidia,pins = "atb", "gma", "gme";
+ /* Colibri LCD (Optional 24 BPP Support) */
+ lcd-24 {
+ nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+ "lpp", "lvp1";
+ nvidia,function = "displaya";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri MMC */
+ mmc {
+ nvidia,pins = "atb", "gma";
nvidia,function = "sdio4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi1 {
- nvidia,pins = "spid", "spie", "spif";
- nvidia,function = "spi1";
+
+ /* Colibri MMCCD */
+ mmccd {
+ nvidia,pins = "gmb";
+ nvidia,function = "gmi_int";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi4 {
+
+ /* Colibri MMC (Optional 8-bit) */
+ mmc-8bit {
+ nvidia,pins = "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ * Note: dta used for BL_ON by default
+ */
+ cif-mclk {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ cif {
+ nvidia,pins = "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri PWM<C>, PWM<D> */
+ pwm-c-d {
+ nvidia,pins = "sdb", "sdd";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri SSP */
+ ssp {
nvidia,pins = "slxa", "slxc", "slxd", "slxk";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uarta {
+
+ /* Colibri UART-A */
+ uart-a {
nvidia,pins = "sdio1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uartd {
+ uart-a-dsr {
+ nvidia,pins = "lpw1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ uart-a-dcd {
+ nvidia,pins = "lpw2";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri UART-B */
+ uart-b {
nvidia,pins = "gmc";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- ulpi {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
+
+ /* Colibri UART-C */
+ uart-c {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USB_CDET */
+ usb-cdet {
+ nvidia,pins = "spdo";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ usbh-oc {
+ nvidia,pins = "spih";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ usbh-pen {
+ nvidia,pins = "spig";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported */
+ vga {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* I2C3 (Optional) */
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* JTAG_RTCK */
+ jtag-rtck {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+ * (All On-module)
+ */
+ gpio-gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- ulpi_refclk {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
+
+ /*
+ * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+ * (All On-module); Colibri CAN_INT
+ */
+ gpio-dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- usb_gpio {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
+
+ /* NAND (On-module) */
+ nand {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "nand";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- vi {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,function = "vi";
+
+ /* Onewire (Optional) */
+ owr {
+ nvidia,pins = "owc";
+ nvidia,function = "owr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- vi_sc {
- nvidia,pins = "csus";
- nvidia,function = "vi_sensor_clk";
+
+ /* Power I2C (On-module) */
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* RESET_OUT */
+ reset-out {
+ nvidia,pins = "ata";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * SPI1 (Optional)
+ * Note: spid and spie used for Colibri Address/Data
+ * Bus (GMI)
+ */
+ spi1 {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+
+ /*
+ * THERMD_ALERT# (On-module), unlatched I2C address pin
+ * of LM95245 temperature sensor therefore requires
+ * disabling for now
+ */
+ lvp0 {
+ nvidia,pins = "lvp0";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
};
};
- ac97: ac97@70002000 {
+ tegra_ac97: ac97@70002000 {
status = "okay";
- nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_HIGH>;
- nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
- GPIO_ACTIVE_HIGH>;
+ nvidia,codec-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio =
+ <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra20-hsuart";
};
nand-controller@70008000 {
};
/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
- i2c_ddc: i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
clock-frequency = <10000>;
};
status = "okay";
clock-frequency = <100000>;
- pmic: tps6586x@34 {
+ pmic@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
ti,system-power-controller;
-
#gpio-cells = <2>;
gpio-controller;
-
- sys-supply = <&vdd_3v3_reg>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&vdd_3v3_reg>;
- vinldo4-supply = <&vdd_3v3_reg>;
- vinldo678-supply = <&vdd_3v3_reg>;
- vinldo9-supply = <&vdd_3v3_reg>;
+ sys-supply = <®_module_3v3>;
+ vin-sm0-supply = <®_3v3_vsys>;
+ vin-sm1-supply = <®_3v3_vsys>;
+ vin-sm2-supply = <®_3v3_vsys>;
+ vinldo01-supply = <®_1v8_vdd_ddr2>;
+ vinldo23-supply = <®_module_3v3>;
+ vinldo4-supply = <®_module_3v3>;
+ vinldo678-supply = <®_module_3v3>;
+ vinldo9-supply = <®_module_3v3>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
- regulator-name = "vdd_sys";
+ reg_3v3_vsys: sys {
+ regulator-name = "VSYS_3.3V";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
- regulator-name = "vdd_sm0,vdd_core";
+ sm0 {
+ regulator-name = "VDD_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
- regulator-name = "vdd_sm1,vdd_cpu";
+ sm1 {
+ regulator-name = "VDD_CPU_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
- regulator-name = "vdd_sm2,vin_ldo*";
+ reg_1v8_vdd_ddr2: sm2 {
+ regulator-name = "VDD_DDR2_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
- regulator-name = "vdd_ldo1,avdd_pll*";
+ /*
+ * +3.3V_ENABLE_N switching via FET:
+ * AVDD_AUDIO_S and +3.3V
+ * see also +3.3V fixed supply
+ */
+ ldo1 {
+ regulator-name = "AVDD_PLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
- regulator-name = "vdd_ldo2,vdd_rtc";
+ ldo2 {
+ regulator-name = "VDD_RTC_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* LDO3 is not connected to anything */
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
- regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ ldo4 {
+ regulator-name = "VDDIO_SYS_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo5_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
- regulator-name = "vdd_ldo5,vdd_fuse";
+ /* Switched via FET from regular +3.3V */
+ ldo5 {
+ regulator-name = "+3.3V_USB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
- regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ ldo6 {
+ regulator-name = "AVDD_VDAC_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- hdmi_vdd_reg: regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
- regulator-name = "vdd_ldo7,avdd_hdmi";
+ reg_3v3_avdd_hdmi: ldo7 {
+ regulator-name = "AVDD_HDMI_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- hdmi_pll_reg: regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
- regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ reg_1v8_avdd_hdmi_pll: ldo8 {
+ regulator-name = "AVDD_HDMI_PLL_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
- regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ ldo9 {
+ regulator-name = "VDDIO_RX_DDR_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
- regulator-name = "vdd_rtc_out,vdd_cell";
+ ldo_rtc {
+ regulator-name = "VCC_BATT";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
- temperature-sensor@4c {
+ /* LM95245 temperature sensor */
+ temp-sensor@4c {
compatible = "national,lm95245";
reg = <0x4c>;
};
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
+
+ /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <3>;
+ nvidia,bus-addr = <0x34>;
+ nvidia,reg-addr = <0x14>;
+ nvidia,reg-data = <0x8>;
+ };
};
memory-controller@7000f400 {
};
};
+ /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ nvidia,phy-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ vbus-supply = <®_lan_v_bus>;
};
- sdhci@c8000600 {
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ clk32k_in: xtal3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_3v3_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "internal_usb";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
- "nvidia,tegra-audio-wm9712";
- nvidia,model = "Colibri T20 AC97 Audio";
-
+ "nvidia,tegra-audio-wm9712";
+ nvidia,model = "Toradex Colibri T20";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
-
- nvidia,ac97-controller = <&ac97>;
-
+ nvidia,ac97-controller = <&tegra_ac97>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+
+ /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+ npwe {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Tri-state nPWE";
+ };
+
+ /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+ rdnwr {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "Not tri-state RDnWR";
+ };
+};
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
slave-addr = <138>;
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
wakeup-source;
};
};
GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
status = "disabled";
};
- gmi@70009000 {
- compatible = "nvidia,tegra20-gmi";
- reg = <0x70009000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0xd0000000 0xfffffff>;
- clocks = <&tegra_car TEGRA20_CLK_NOR>;
- clock-names = "gmi";
- resets = <&tegra_car 42>;
- reset-names = "gmi";
- status = "disabled";
- };
-
nand-controller@70008000 {
compatible = "nvidia,tegra20-nand";
reg = <0x70008000 0x100>;
status = "disabled";
};
+ gmi@70009000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd0000000 0xfffffff>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ status = "disabled";
+ };
+
pwm: pwm@7000a000 {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>;
};
};
/ {
model = "Toradex Apalis T30 on Apalis Evaluation Board";
- compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+ compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
};
pcie@3000 {
- status = "okay";
-
pci@1,0 {
status = "okay";
};
pci@2,0 {
status = "okay";
};
-
- pci@3,0 {
- status = "okay";
- };
};
host1x@50000000 {
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
+ /* Apalis UART1 */
serial@70006000 {
status = "okay";
};
+ /* Apalis UART2 */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART3 */
serial@70006200 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART4 */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
* CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
* carrier board)
*/
- cami2c: i2c@7000c500 {
+ i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev0: spidev@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
- };
};
/* SPI5: Apalis SPI2 */
spi@7000dc00 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev1: spidev@2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <25000000>;
- };
- };
-
- hda@70030000 {
- status = "okay";
};
- sd1: sdhci@78000000 {
+ /* Apalis SD1 */
+ sdhci@78000000 {
status = "okay";
bus-width = <4>;
/* SD1_CD# */
no-1-8-v;
};
- mmc1: sdhci@78000400 {
+ /* Apalis MMC1 */
+ sdhci@78000400 {
status = "okay";
bus-width = <8>;
/* MMC1_CD# */
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbo1_vbus_reg>;
+ vbus-supply = <®_usbo1_vbus>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb-phy@7d004000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM_BKL1 */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
};
gpio-keys {
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwm1 {
- label = "PWM1";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
-
- pwm2 {
- label = "PWM2";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- pwm3 {
- label = "PWM3";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
- /* USBO1_EN */
- usbo1_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbo1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+};
- /* USBH_EN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+ "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+ "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@2d";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pcie@3000 {
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <®_5v0>;
+ };
+ };
+
+ /* Apalis UART1 */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Apalis UART2 */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Apalis UART3 */
+ serial@70006200 {
+ status = "okay";
+ };
+
+ /* Apalis UART4 */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* Apalis SD1 */
+ sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* Apalis MMC1 */
+ sdhci@78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <®_vddio_sdmmc3>;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ vbus-supply = <®_usbo1_vbus>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "WAKE1_MICO";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+
+ /*
+ * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+ * EN_+3.3_SDMMC3 GPIO
+ */
+ reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0
+ 3300000 0x1>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vddio_sdmmc_1v8_reg>;
+ };
+};
+
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ pcie@3000 {
+ status = "okay";
+ avdd-pexa-supply = <&vdd2_reg>;
+ avdd-pexb-supply = <&vdd2_reg>;
+ avdd-pex-pll-supply = <&vdd2_reg>;
+ avdd-plle-supply = <&ldo6_reg>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+
+ /* Apalis type specific */
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ /* Apalis PCIe */
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Analogue Audio (On-module) */
+ clk1-out-pw4 {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3-rts-n-pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3-cts-n-pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2-cs0-n-px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi-a16-pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* CAN_INT2 */
+ spi2-cs2-n-pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Digital Audio */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1-fs-pn0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM1 */
+ pu6 {
+ nvidia,pins = "pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ pu5 {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ pu4 {
+ nvidia,pins = "pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1-clk-pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1-cmd-pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1-sck-px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd-sck-pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi-data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi-clk-py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2-rxd-pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3-rxd-pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2-i2c-sda-pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-dat0-paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* EN_+3.3_SDMMC3 */
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-rts-n-pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr-i2c-scl-pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd-dc1-pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* TOUCH_PEN_INT# (On-module) */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ clock-frequency = <10000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* SGTL5000 audio codec */
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
+ clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+ };
+
+ pmic: pmic@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-name = "+V1.35_VDDIO_DDR";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "+V1.05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "+V1.0_VDD_CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+ * is off
+ */
+ vddio_sdmmc_1v8_reg: ldo1 {
+ regulator-name = "+VDDIO_SDMMC3_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "EN_+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "+V1.2_CSI";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "+V1.2_VDD_RTC";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for (unsupported) analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "+V2.8_AVDD_VDAC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "+V1.05_AVDD_PLLE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "+V1.2_AVDD_PLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "+V1.0_VDD_DDR_HS";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ touchscreen@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ regulator@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi@7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ ahub@70080000 {
+ i2s@70080500 {
+ status = "okay";
+ };
+ };
+
+ /* eMMC */
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
+ };
+
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
+ };
+
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
+
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+ "nvidia,tegra-audio-sgtl5000";
+ nvidia,model = "Toradex Apalis T30";
+ nvidia,audio-routing =
+ "Headphone Jack", "HP_OUT",
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack";
+ nvidia,i2s-controller = <&tegra_i2s2>;
+ nvidia,audio-codec = <&sgtl5000>;
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+};
/*
* Toradex Apalis T30 Module Device Tree
- * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
- * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
*/
/ {
- model = "Toradex Apalis T30";
- compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
pcie@3000 {
+ status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
- vdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
avdd-plle-supply = <&ldo6_reg>;
- vddio-pex-ctl-supply = <&sys_3v3_reg>;
- hvdd-pex-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+ /* Apalis type specific */
pci@1,0 {
nvidia,num-lanes = <4>;
};
+ /* Apalis PCIe */
pci@2,0 {
nvidia,num-lanes = <1>;
};
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
pci@3,0 {
+ status = "okay";
nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis BKL1_PWM */
- uart3_rts_n_pc0 {
+ uart3-rts-n-pc0 {
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
- uart3_cts_n_pa1 {
+ uart3-cts-n-pa1 {
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis CAN1 on SPI6 */
- spi2_cs0_n_px3 {
+ spi2-cs0-n-px3 {
nvidia,pins = "spi2_cs0_n_px3",
"spi2_miso_px1",
"spi2_mosi_px0",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* CAN_INT1 */
- spi2_cs1_n_pw2 {
+ spi2-cs1-n-pw2 {
nvidia,pins = "spi2_cs1_n_pw2";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAN2 on SPI4 */
- gmi_a16_pj7 {
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* CAN_INT2 */
- spi2_cs2_n_pw3 {
+ spi2-cs2-n-pw3 {
nvidia,pins = "spi2_cs2_n_pw3";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- clk1_req_pee2 {
+ clk1-req-pee2 {
nvidia,pins = "clk1_req_pee2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- clk2_out_pw5 {
+ clk2-out-pw5 {
nvidia,pins = "clk2_out_pw5";
nvidia,function = "extperiph2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 {
+ dap1-fs-pn0 {
nvidia,pins = "dap1_fs_pn0",
"dap1_din_pn1",
"dap1_dout_pn2",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Apalis I2C3 */
- cam_i2c_scl_pbb1 {
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis MMC1 */
- sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6",
- "sdmmc3_cmd_pa7";
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat0_pb7 {
- nvidia,pins = "sdmmc3_dat0_pb7",
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
pv3 {
nvidia,pins = "pv3";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
/* Apalis PWM1 */
pu6 {
};
/* Apalis RESET_MOCI# */
- gmi_rst_n_pi4 {
+ gmi-rst-n-pi4 {
nvidia,pins = "gmi_rst_n_pi4";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis SD1 */
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis SD1_CD# */
- clk2_req_pcc5 {
+ clk2-req-pcc5 {
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPI1 */
- spi1_sck_px5 {
+ spi1-sck-px5 {
nvidia,pins = "spi1_sck_px5",
"spi1_mosi_px4",
"spi1_miso_px7",
};
/* Apalis SPI2 */
- lcd_sck_pz4 {
+ lcd-sck-pz4 {
nvidia,pins = "lcd_sck_pz4",
"lcd_sdout_pn5",
"lcd_sdin_pz2",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis UART1 */
- ulpi_data0 {
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
};
/* Apalis UART2 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
};
/* Apalis UART3 */
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
};
/* Apalis UART4 */
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7",
"uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
/* Apalis USBO1_OC# */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis WAKE1_MICO */
pv1 {
nvidia,pins = "pv1";
};
/* eMMC (On-module) */
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* LVDS Transceiver Configuration */
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
};
pbb3 {
nvidia,pins = "pbb3",
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- /* SW2: +V1.05 */
vdd2_reg: vdd2 {
- regulator-name =
- "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/*
* EN_+V3.3 switching via FET:
- * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also v3_3 fixed supply
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- /* +V1.2_CSI */
ldo3_reg: ldo3 {
- regulator-name =
- "avdd_dsi_csi,pwrdet_mipi";
+ regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
reg = <1>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra30-colibri.dtsi"
/ {
model = "Toradex Colibri T30 on Colibri Evaluation Board";
- compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+ compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Colibri UART-B */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
};
};
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- can0: can@0 {
+
+ can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
- };
- spidev0: spi@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
+ vdd-supply = <®_3v3>;
+ xceiver-supply = <®_5v0>;
};
};
sdhci@78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
no-1-8-v;
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbc_vbus_reg>;
+ vbus-supply = <®_usbc_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM<A> */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
};
- clocks {
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
};
gpio-keys {
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwmb {
- label = "PWM<B>";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
- pwmc {
- label = "PWM<C>";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
- pwmd {
- label = "PWM<D>";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- usbc_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbc_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&sys_5v0_reg>;
- };
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
- /* USBH_PEN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
};
};
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/*
* Toradex Colibri T30 Module Device Tree
- * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
*/
/ {
- model = "Toradex Colibri T30";
- compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri Address/Data Bus (GMI) */
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_cs0_n_px6",
+ "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2",
+ "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ dap4-din-pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7",
+ "pbb7",
+ "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat3_py4",
+ "uart3_cts_n_pa1",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-d18-pm2 {
+ nvidia,pins = "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-cs0-n-pn4 {
+ nvidia,pins = "lcd_cs0_n_pn4",
+ "lcd_sdin_pz2",
+ "pu0",
+ "pu1",
+ "pu2",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "spi1_miso_px7",
+ "uart3_rts_n_pc0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed RDnWR and therefore disabled */
+ lcd-cs1-n-pw0 {
+ nvidia,pins = "lcd_cs1_n_pw0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Multiplexed GMI_CLK and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+ sdmmc3-dat4-pd1 {
+ nvidia,pins = "sdmmc3_dat4_pd1";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+ sdmmc3-dat5-pd0 {
+ nvidia,pins = "sdmmc3_dat5_pd0";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Colibri BL_ON */
pv2 {
nvidia,pins = "pv2";
};
/* Colibri Backlight PWM<A> */
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Colibri CAN_INT */
- kb_row8_ps0 {
+ kb-row8-ps0 {
nvidia,pins = "kb_row8_ps0";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri DDC */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri EXT_IO* */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spdif-in-pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri GPIO */
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5",
+ "pcc2",
+ "pv3",
+ "sdmmc1_dat2_py5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr1-pc1 {
+ nvidia,pins = "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
/*
* Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
- * todays display need DE, disable LCD_M1
+ * today's display need DE, disable LCD_M1
*/
- lcd_m1_pw1 {
+ lcd-m1-pw1 {
nvidia,pins = "lcd_m1_pw1";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Colibri MMC */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "sdmmc2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3",
"kb_row12_ps4",
"kb_row13_ps5",
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri MMC_CD */
+ gmi-wp-n-pc7 {
+ nvidia,pins = "gmi_wp_n_pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri nRESET_OUT */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ */
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_mclk_pt1",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<B> */
+ sdmmc3-dat2-pb5 {
+ nvidia,pins = "sdmmc3_dat2_pb5";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<C> */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<D> */
+ sdmmc3-cmd-pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
/* Colibri SSP */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat6_pd3 {
+ /* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+ sdmmc3-dat6-pd3 {
nvidia,pins = "sdmmc3_dat6_pd3",
"sdmmc3_dat7_pd4";
nvidia,function = "spdif";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_A */
- ulpi_data0 {
+ /* Colibri UART-A */
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_B */
- gmi_a16_pj7 {
+ /* Colibri UART-B */
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_C */
- uart2_rxd {
+ /* Colibri UART-C */
+ uart2-rxd {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* eMMC */
- sdmmc4_clk_pcc4 {
+ /* Colibri USBC_DET */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ spi2-cs2-n-pw3, {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1",
+ "pex_wake_n_pdd3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN_V_BUS, LAN_RESET# (On-module) */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2",
+ "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+ pex-l2-rst-n-pcc6 {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2",
+ "pex_l1_prsnt_n_pdd4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "hdmi_cec_pee3",
+ "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-dqs-pi2 {
+ nvidia,pins = "gmi_dqs_pi2",
+ "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr2-pc6 {
+ nvidia,pins = "lcd_pwr2_pc6";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
+ * touch screen controller (On-module)
*/
i2c@7000d000 {
status = "okay";
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
/* SW2: unused */
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also 3v3 fixed supply
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
/* LDO3: unused */
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- /* EHCI instance 1: USB2_DP/N -> AX88772B */
+ /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
usb@7d004000 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@7d004000 {
status = "okay";
- nvidia,is-wired = <1>;
+ vbus-supply = <®_lan_v_bus>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+};
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>,
+ <&{/cpus/cpu@2}>,
+ <&{/cpus/cpu@3}>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
function = "sd";
};
+ pinctrl_sd_uhs: sd-uhs {
+ groups = "sd";
+ function = "sd";
+ };
+
pinctrl_sd1: sd1 {
groups = "sd1";
function = "sd1";
};
+ pinctrl_spi0: spi0 {
+ groups = "spi0";
+ function = "spi0";
+ };
+
+ pinctrl_spi1: spi1 {
+ groups = "spi1";
+ function = "spi1";
+ };
+
+ pinctrl_spi2: spi2 {
+ groups = "spi2";
+ function = "spi2";
+ };
+
+ pinctrl_spi3: spi3 {
+ groups = "spi3";
+ function = "spi3";
+ };
+
pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd1: sdhc@5a600000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a600000 0x200>;
+ interrupts = <0 85 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clocks = <&mio_clk 2>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 2>, <&mio_rst 5>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
usb2: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-pro4-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb_phy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb1_vbus>;
+ };
+ };
};
soc-glue@5f900000 {
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 4>;
+ phys = <&usb_phy2>, <&usb0_ssphy>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x100>;
+
+ usb0_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_ssphy: ss-phy@10 {
+ compatible = "socionext,uniphier-pro4-usb3-ssphy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb0_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 4>;
+ phys = <&usb_phy3>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x100>;
+
+ usb1_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5a";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
cache-level = <3>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
+
+ emmc: sdhc@68400000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68400000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@68800000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68800000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
};
};
};
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ emmc: sdhc@5a000000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a000000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 21>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
clock-names = "apb_pclk";
};
- ssp@101f4000 {
+ spi@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include "vf610.dtsi"
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ sff: sfp {
+ compatible = "sff,sff";
+ pinctrl-0 = <&pinctrl_optical>;
+ pinctrl-names = "default";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
};
&adc0 {
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};
label = "eth_cu_1000_3";
};
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_1";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff>;
+ };
+
port@6 {
reg = <6>;
label = "cpu";
>;
};
+ pinctrl_optical: optical-grp {
+ fsl,pins = <
+ /* SFF SD input */
+ VF610_PAD_PTE27__GPIO_132 0x3061
+
+ /* SFF Transmit disable output */
+ VF610_PAD_PTE13__GPIO_118 0x3043
+ >;
+ };
+
pinctrl_switch: switch-grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x3061
phy-handle = <&switch1phy4>;
};
+ port@9 {
+ reg = <9>;
+ label = "sff2";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
switch1port10: port@10 {
reg = <10>;
#size-cells = <0>;
};
};
+
+ sff2: sff2 {
+ /* lower */
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ /* upper */
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
};
&dspi0 {
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
interrupt-controller;
-
- enet_swr_en {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "enet-swr-en";
- };
};
/*
reg = <0>;
};
- i2c@1 {
+ sff2_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
- i2c@2 {
+ sff3_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
i2c@3 {
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
#include "vf500.dtsi"
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
status = "disabled";
};
- dspi0: dspi0@4002c000 {
+ dspi0: spi@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- dspi1: dspi1@4002d000 {
+ dspi1: spi@4002d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- qspi0: quadspi@40044000 {
+ qspi0: spi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
status = "disabled";
};
- dspi2: dspi2@400ac000 {
+ dspi2: spi@400ac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- dspi3: dspi3@400ad000 {
+ dspi3: spi@400ad000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- qspi1: quadspi@400c4000 {
+ qspi1: spi@400c4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon@52 {
+ hwmon@34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon@53 {
+ hwmon@35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon@54 {
+ hwmon@36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash@0 {
+ flash@1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom@0 {
+ eeprom: eeprom@2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_NFSD_V3=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
+bool __init exynos_secure_firmware_available(void);
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
}
-void __init exynos_firmware_init(void)
+bool __init exynos_secure_firmware_available(void)
{
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
- return;
+ return false;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
- return;
+ return false;
}
+ return true;
+}
+
+void __init exynos_firmware_init(void)
+{
+ if (!exynos_secure_firmware_available())
+ return;
+
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
int (*cpu_suspend)(unsigned long);
};
-static const struct exynos_pm_data *pm_data __ro_after_init;
+/* Used only on Exynos542x/5800 */
+struct exynos_pm_state {
+ int cpu_state;
+ unsigned int pmu_spare3;
+ void __iomem *sysram_base;
+};
-static int exynos5420_cpu_state;
-static unsigned int exynos_pmu_spare3;
+static const struct exynos_pm_data *pm_data __ro_after_init;
+static struct exynos_pm_state pm_state;
/*
* GIC wake-up support
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+ pm_state.pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
/*
* The cpu state needs to be saved and restored so that the
* secondary CPUs will enter low power start. Though the U-Boot
* needs to restore it back in case, the primary cpu fails to
* suspend for any reason.
*/
- exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
- EXYNOS5420_CPU_STATE);
+ pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
+ EXYNOS5420_CPU_STATE);
exynos_pm_enter_sleep_mode();
EXYNOS5_ARM_CORE0_SYS_PWR_REG);
/* Restore the sysram cpu state register */
- writel_relaxed(exynos5420_cpu_state,
- sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(pm_state.cpu_state,
+ pm_state.sysram_base + EXYNOS5420_CPU_STATE);
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
if (exynos_pm_central_resume())
goto early_wakeup;
- pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+ pmu_raw_writel(pm_state.pmu_spare3, S5P_PMU_SPARE3);
early_wakeup:
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
+
+ /*
+ * Applicable as of now only to Exynos542x. If booted under secure
+ * firmware, the non-secure region of sysram should be used.
+ */
+ if (exynos_secure_firmware_available())
+ pm_state.sysram_base = sysram_ns_base_addr;
+ else
+ pm_state.sysram_base = sysram_base_addr;
}
return -ENODEV;
}
+/**
+ * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
+ *
+ * @oh: struct omap_hwmod *
+ * @np: struct device_node *
+ *
+ * Fix up module register offsets for modules with mpu_rt_idx.
+ * Only needed for cpsw with interconnect target module defined
+ * in device tree while still using legacy hwmod platform data
+ * for rev, sysc and syss registers.
+ *
+ * Can be removed when all cpsw hwmod platform data has been
+ * dropped.
+ */
+static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
+ struct device_node *np,
+ struct resource *res)
+{
+ struct device_node *child = NULL;
+ int error;
+
+ child = of_get_next_child(np, child);
+ if (!child)
+ return;
+
+ error = of_address_to_resource(child, oh->mpu_rt_idx, res);
+ if (error)
+ pr_err("%s: error mapping mpu_rt_idx: %i\n",
+ __func__, error);
+}
+
/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
size = be32_to_cpup(ranges);
pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
- oh->name, np->name, base, size);
+ oh ? oh->name : "", np->name, base, size);
+
+ if (oh && oh->mpu_rt_idx) {
+ omap_hwmod_fix_mpu_rt_idx(oh, np, res);
+
+ return 0;
+ }
res->start = base;
res->end = base + size - 1;
#define gta02_udc_vbus_draw NULL
#endif
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
static char *gta02_batteries[] = {
"battery",
};
},
},
- .probe_done = gta02_pmu_attach_child_devices,
.mbc_event_callback = gta02_pmu_event_callback,
};
&s3c_device_ts,
};
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device. Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent. This makes them get suspended and
- * resumed with their parent the pcf50633 still around. All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
- int n;
-
- /* Grab a copy of the now probed PMU pointer. */
- gta02_pcf = pcf;
-
- for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
- gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
- platform_add_devices(gta02_devices_pmu_children,
- ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
static void gta02_poweroff(void)
{
pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
};
#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
[0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
/*
* This macro simplifies the table bellow
*/
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+ _yres, margin_top, margin_bottom, vsync, refresh) \
.width = _xres, \
.xres = _xres, \
.height = _yres, \
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
+ 240, 21, 38, 6, /* x timing */
320, 4, 4, 2, /* y timing */
60), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
[1] = { /* mini2440 + 7" TFT + touchscreen */
_LCD_DECLARE(
10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
+ 800, 40, 40, 48, /* x timing */
480, 29, 3, 3, /* y timing */
50), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN),
},
- /* The VGA shield can outout at several resolutions. All share
+ /* The VGA shield can outout at several resolutions. All share
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
_LCD_DECLARE(
10,
1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
+ 768, 200, 16, 16, /* x timing */
24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
+ * tested with the FPGA shield
+ */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
* and disable the pull down resistors on pins we are using for LCD
- * data. */
+ * data.
+ */
.gpcup = (0xf << 1) | (0x3f << 10),
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .wprotect_invert = 1,
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
[2] = {
.name = "kernel",
/* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
+ * or a uImage with a ramdisk attached
+ */
.size = 0x00500000,
.offset = SZ_256K + SZ_128K,
},
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .ecc_mode = NAND_ECC_HW,
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource mini2440_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE),
};
},
#if 0
/* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
+ * marked as "in use" somehow in the kernel -- possibly wrongly
+ */
{
.gpio = S3C2410_GPG(11), /* K6 */
.code = KEY_F6,
static int __init mini2440_features_setup(char *str)
{
if (str)
- strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+ strlcpy(mini2440_features_str, str,
+ sizeof(mini2440_features_str));
return 1;
}
};
static void __init mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
+ struct mini2440_features_t *features,
+ const char *features_str)
{
- const char * fp = features_str;
+ const char *fp = features_str;
features->count = 0;
features->done = 0;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
+ pr_info("MINI2440: '%c' ignored, screen type already set\n",
+ f);
} else {
int li = f - '0';
+
if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n", f);
+ pr_info("MINI2440: '%c' out of range LCD mode\n",
+ f);
else {
features->optional[features->count++] =
&s3c_device_lcd;
break;
case 'b':
if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
+ pr_info("MINI2440: '%c' ignored, backlight already set\n",
+ f);
else {
features->optional[features->count++] =
&mini2440_led_backlight;
features->done |= FEATURE_BACKLIGHT;
break;
case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
+ pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+ f);
break;
case 'c':
if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
+ pr_info("MINI2440: '%c' ignored, camera already registered\n",
+ f);
else
features->optional[features->count++] =
&s3c_device_camif;
struct mini2440_features_t features = { 0 };
int i;
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ pr_info("MINI2440: Option string mini2440=%s\n",
mini2440_features_str);
/* Parse the feature string */
mini2440_fb_info.displays =
&mini2440_lcd_cfg[features.lcd_index];
- printk(KERN_INFO "MINI2440: LCD");
+ pr_info("MINI2440: LCD");
for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
+ pr_cont(" [%d:%dx%d]", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
else
- printk(" %d:%dx%d", li,
+ pr_cont(" %d:%dx%d", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
- printk("\n");
+ pr_cont("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
config HOLES_IN_ZONE
def_bool y
- depends on NUMA
source kernel/Kconfig.hz
+# SPDX-License-Identifier: GPL-2.0+
+
dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
device_type = "memory";
reg = <0x1 0xe0000000 0x0 0x0>;
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&timer {
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
* Copyright (c) 2017 Andreas Färber
*/
+#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ cmu: clock-controller@e0168000 {
+ compatible = "actions,s700-cmu";
+ reg = <0x0 0xe0168000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
sps: power-controller@e01b0100 {
compatible = "actions,s700-sps";
reg = <0x0 0xe01b0100 0x0 0x100>;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+};
+
+&i2c0 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+ gpio-line-names =
+ "GPIO-A", /* GPIO_0, LSEC pin 23 */
+ "GPIO-B", /* GPIO_1, LSEC pin 24 */
+ "GPIO-C", /* GPIO_2, LSEC pin 25 */
+ "GPIO-D", /* GPIO_3, LSEC pin 26 */
+ "GPIO-E", /* GPIO_4, LSEC pin 27 */
+ "GPIO-F", /* GPIO_5, LSEC pin 28 */
+ "GPIO-G", /* GPIO_6, LSEC pin 29 */
+ "GPIO-H", /* GPIO_7, LSEC pin 30 */
+ "GPIO-I", /* GPIO_8, LSEC pin 31 */
+ "GPIO-J", /* GPIO_9, LSEC pin 32 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "SIRQ2_1V8", /* GPIO_12 */
+ "PCM0_OUT", /* GPIO_13 */
+ "WIFI_LED", /* GPIO_14 */
+ "PCM0_SYNC", /* GPIO_15 */
+ "PCM0_CLK", /* GPIO_16 */
+ "PCM0_IN", /* GPIO_17 */
+ "BT_LED", /* GPIO_18 */
+ "LED0", /* GPIO_19 */
+ "LED1", /* GPIO_20 */
+ "JTAG_TCK", /* GPIO_21 */
+ "JTAG_TMS", /* GPIO_22 */
+ "JTAG_TDI", /* GPIO_23 */
+ "JTAG_TDO", /* GPIO_24 */
+ "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+ "NC", /* GPIO_26 */
+ "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+ "SD0_D0", /* GPIO_28 */
+ "SD0_D1", /* GPIO_29 */
+ "SD0_D2", /* GPIO_30 */
+ "SD0_D3", /* GPIO_31 */
+ "SD1_D0", /* GPIO_32 */
+ "SD1_D1", /* GPIO_33 */
+ "SD1_D2", /* GPIO_34 */
+ "SD1_D3", /* GPIO_35 */
+ "SD0_CMD", /* GPIO_36 */
+ "SD0_CLK", /* GPIO_37 */
+ "SD1_CMD", /* GPIO_38 */
+ "SD1_CLK", /* GPIO_39 */
+ "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+ "SPI0_CS", /* GPIO_41, LSEC pin 12 */
+ "SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+ "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+ "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+ "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+ "UART0_RX", /* GPIO_46, LSEC pin 7 */
+ "UART0_TX", /* GPIO_47, LSEC pin 5 */
+ "UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+ "UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+ "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+ "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+ "I2C0_SCLK", /* GPIO_52 */
+ "I2C0_SDATA", /* GPIO_53 */
+ "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+ "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+ "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+ "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+ "CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+ "CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+ "CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+ "CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+ "CSI0_CN", /* GPIO_62, HSEC pin 4 */
+ "CSI0_CP", /* GPIO_63, HSEC pin 2 */
+ "CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+ "CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+ "CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+ "CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+ "[CLK0]", /* GPIO_68, HSEC pin 15 */
+ "CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+ "CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+ "CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+ "CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+ "CSI1_CN", /* GPIO_73, HSEC pin 56 */
+ "CSI1_CP", /* GPIO_74, HSEC pin 54 */
+ "[CLK1]", /* GPIO_75, HSEC pin 17 */
+ "[GPIOD0]", /* GPIO_76 */
+ "[GPIOD1]", /* GPIO_77 */
+ "BT_RST_N", /* GPIO_78 */
+ "EXT_DC_EN", /* GPIO_79 */
+ "[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+ "[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+ "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+ "WAKE_BT", /* GPIO_84 */
+ "WL_REG_ON", /* GPIO_85 */
+ "NC", /* GPIO_86 */
+ "NC", /* GPIO_87 */
+ "NC", /* GPIO_88 */
+ "NC", /* GPIO_89 */
+ "NC", /* GPIO_90 */
+ "WIFI_WAKE", /* GPIO_91 */
+ "BT_WAKE", /* GPIO_92 */
+ "NC", /* GPIO_93 */
+ "OTG_EN2", /* GPIO_94 */
+ "OTG_EN", /* GPIO_95 */
+ "DSI_DP3", /* GPIO_96, HSEC pin 45 */
+ "DSI_DN3", /* GPIO_97, HSEC pin 47 */
+ "DSI_DP1", /* GPIO_98, HSEC pin 33 */
+ "DSI_DN1", /* GPIO_99, HSEC pin 35 */
+ "DSI_CP", /* GPIO_100, HSEC pin 21 */
+ "DSI_CN", /* GPIO_101, HSEC pin 23 */
+ "DSI_DP0", /* GPIO_102, HSEC pin 27 */
+ "DSI_DN0", /* GPIO_103, HSEC pin 29 */
+ "DSI_DP2", /* GPIO_104, HSEC pin 39 */
+ "DSI_DN2", /* GPIO_105, HSEC pin 41 */
+ "N0_D0", /* GPIO_106 */
+ "N0_D1", /* GPIO_107 */
+ "N0_D2", /* GPIO_108 */
+ "N0_D3", /* GPIO_109 */
+ "N0_D4", /* GPIO_110 */
+ "N0_D5", /* GPIO_111 */
+ "N0_D6", /* GPIO_112 */
+ "N0_D7", /* GPIO_113 */
+ "N0_DQS", /* GPIO_114 */
+ "N0_DQSN", /* GPIO_115 */
+ "NC", /* GPIO_116 */
+ "NC", /* GPIO_117 */
+ "NC", /* GPIO_118 */
+ "N0_CEB1", /* GPIO_119 */
+ "CARD_DT", /* GPIO_120 */
+ "N0_CEB3", /* GPIO_121 */
+ "SD_DAT0", /* GPIO_122, HSEC pin 1 */
+ "SD_DAT1", /* GPIO_123, HSEC pin 3 */
+ "SD_DAT2", /* GPIO_124, HSEC pin 5 */
+ "SD_DAT3", /* GPIO_125, HSEC pin 7 */
+ "NC", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+ "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+ "NC", /* GPIO_130 */
+ "SD_CMD", /* GPIO_131 */
+ "GPIO-L", /* GPIO_132, LSEC pin 34 */
+ "GPIO-K", /* GPIO_133, LSEC pin 33 */
+ "NC", /* GPIO_134 */
+ "SD_SCLK", /* GPIO_135 */
+ "NC", /* GPIO_136 */
+ "JTAG_TRST", /* GPIO_137 */
+ "I2C3_SCLK", /* GPIO_138 */
+ "LED2", /* GPIO_139 */
+ "LED3", /* GPIO_140 */
+ "I2C3_SDATA", /* GPIO_141 */
+ "UART3_RX", /* GPIO_142 */
+ "UART3_TX", /* GPIO_143 */
+ "UART3_RTSB", /* GPIO_144 */
+ "UART3_CTSB"; /* GPIO_145 */
+
+ i2c0_default: i2c0-default {
+ pinmux {
+ groups = "i2c0_mfp";
+ function = "i2c0";
+ };
+ pinconf {
+ pins = "i2c0_sclk", "i2c0_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c1_default: i2c1-default {
+ pinconf {
+ pins = "i2c1_sclk", "i2c1_sdata";
+ bias-pull-up;
+ };
+ };
- uart5_clk: uart5-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
+ i2c2_default: i2c2-default {
+ pinconf {
+ pins = "i2c2_sclk", "i2c2_sdata";
+ bias-pull-up;
+ };
};
};
&uart5 {
status = "okay";
- clocks = <&uart5_clk>;
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/clock/actions,s900-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ diff24M: diff24M {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ sps: power-controller@e012e000 {
+ compatible = "actions,s900-sps";
+ reg = <0x0 0xe012e000 0x0 0x2000>;
+ #power-domain-cells = <1>;
+ };
+
+ cmu: clock-controller@e0160000 {
+ compatible = "actions,s900-cmu";
+ reg = <0x0 0xe0160000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e0172000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0172000 0 0x1000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e0174000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e0176000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0176000 0 0x1000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e0178000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ clocks = <&cmu CLK_I2C4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e017a000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe017a000 0 0x1000>;
+ clocks = <&cmu CLK_I2C5>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s900-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 146>;
+ #gpio-cells = <2>;
+ };
+
timer: timer@e0228000 {
compatible = "actions,s900-timer";
reg = <0x0 0xe0228000 0x0 0x8000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "timer1";
};
+
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&cmu CLK_DMAC>;
+ };
};
};
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <®_dcdc1>;
bus-width = <8>;
non-removable;
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "nanopi-a64:blue:status";
+ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dcdc1>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
&ohci0 {
status = "okay";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+ status = "okay";
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dcdc1>;
+ allwinner,tx-delay-ps = <600>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
/* DCDC3 is polyphased with DCDC2 */
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
®_dcdc5 {
regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
regulator-name = "vcc-wifi-io";
};
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
status = "okay";
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
};
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
};
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
status = "okay";
};
#include "axp803.dtsi"
®_aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
regulator-name = "vcc-wifi-io";
};
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
+®_eldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi";
+};
+
®_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vcc-hdmi-supply = <®_dldo1>;
};
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ status = "okay";
+ };
+};
+
+/* On debug connector */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
-&usbphy {
+/* Bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ *
+ * Copyright (c) 2018 ARM Ltd.
+ */
+
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+ model = "Pine64 LTS";
+ compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+ "allwinner,sun50i-a64";
+};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_eldo1>;
bus-width = <8>;
&r_i2c {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&r_i2c_pins_a>;
+ pinctrl-0 = <&r_i2c_pl89_pins>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
device_type = "cpu";
reg = <0>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu1: cpu@1 {
device_type = "cpu";
reg = <1>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu2: cpu@2 {
device_type = "cpu";
reg = <2>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu3: cpu@3 {
device_type = "cpu";
reg = <3>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ de: display-engine {
+ compatible = "allwinner,sun50i-a64-display-engine";
+ allwinner,pipelines = <&mixer0>,
+ <&mixer1>;
+ status = "disabled";
};
osc24M: osc24M_clk {
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ mixer0: mixer@100000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-0";
+ reg = <0x100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon0: endpoint {
+ remote-endpoint = <&tcon0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ mixer1: mixer@200000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-1";
+ reg = <0x200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ reg = <1>;
+
+ mixer1_out_tcon1: endpoint {
+ remote-endpoint = <&tcon1_in_mixer1>;
+ };
+ };
+ };
+ };
};
syscon: syscon@1c00000 {
#dma-cells = <1>;
};
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun50i-a64-tcon-lcd",
+ "allwinner,sun8i-a83t-tcon-lcd";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "ahb", "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd", "lvds";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun50i-a64-tcon-tv",
+ "allwinner,sun8i-a83t-tcon-tv";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON1>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ reg = <0>;
+
+ tcon1_in_mixer1: endpoint {
+ remote-endpoint = <&mixer1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ };
+ };
+ };
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
#size-cells = <0>;
};
+ sid: eeprom@1c14000 {
+ compatible = "allwinner,sun50i-a64-sid";
+ reg = <0x1c14000 0x400>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
};
mmc2_pins: mmc2-pins {
- pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+ pins = "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
bias-pull-up;
};
+ mmc2_ds_pin: mmc2-ds-pin {
+ pins = "PC1";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
pwm_pin: pwm_pin {
pins = "PD22";
function = "pwm";
function = "spi1";
};
- uart0_pins_a: uart0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
status = "disabled";
};
+ hdmi: hdmi@1ee0000 {
+ compatible = "allwinner,sun50i-a64-dw-hdmi",
+ "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon1: endpoint {
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@1ef0000 {
+ compatible = "allwinner,sun50i-a64-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu 7>;
+ clock-names = "bus", "mod", "pll-0";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupt-controller;
#interrupt-cells = <3>;
- r_i2c_pins_a: i2c-a {
+ r_i2c_pl89_pins: r-i2c-pl89-pins {
pins = "PL8", "PL9";
function = "s_i2c";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H5";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus H5";
+ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ soc {
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+ };
};
&ccu {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi One Plus";
+ compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
#size-cells = <1>;
ranges;
+ syscon: syscon@3000000 {
+ compatible = "allwinner,sun50i-h6-system-control",
+ "allwinner,sun50i-a64-system-control";
+ reg = <0x03000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@28000 {
+ compatible = "mmio-sram";
+ reg = <0x00028000 0x1e000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00028000 0x1e000>;
+
+ de2_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h6-sram-c",
+ "allwinner,sun50i-a64-sram-c";
+ reg = <0x0000 0x1e000>;
+ };
+ };
+ };
+
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
clock-names = "uartclk", "apb_pclk";
};
- spi0: ssp@e1020000 {
+ spi0: spi@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1020000 0 0x1000>;
clock-names = "apb_pclk";
};
- spi1: ssp@e1030000 {
+ spi1: spi@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1030000 0 0x1000>;
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
serial1 = &uart_A;
};
+ linein: audio-codec@0 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7241";
+ VDDA-supply = <&vcc_3v3>;
+ VDDP-supply = <&vcc_3v3>;
+ VDDD-supply = <&vcc_3v3>;
+ status = "okay";
+ sound-name-prefix = "Linein";
+ };
+
+ lineout: audio-codec@1 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7154";
+ VDD-supply = <&vcc_3v3>;
+ PVDD-supply = <&vcc_5v>;
+ status = "okay";
+ sound-name-prefix = "Lineout";
+ };
+
+ spdif_dit: audio-codec@2 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
+ dmics: audio-codec@3 {
+ #sound-dai-cells = <0>;
+ compatible = "dmic-codec";
+ num-channels = <7>;
+ wakeup-delay-ms = <50>;
+ status = "okay";
+ sound-name-prefix = "MIC";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
regulator-always-on;
};
- vddio_boot: regulator-vddio_boot {
+ vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-always-on;
};
- vcc_3v3: regulator-vcc_3v3 {
+ vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
usb_pwr: regulator-usb_pwr {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
enable-active-high;
};
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
clock-names = "ext_clock";
};
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-
speaker-leds {
compatible = "gpio-leds";
};
};
- linein: audio-codec@0 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7241";
- VDDA-supply = <&vcc_3v3>;
- VDDP-supply = <&vcc_3v3>;
- VDDD-supply = <&vcc_3v3>;
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S400";
+ audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+ <&tdmin_lb>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "SPDIFOUT IN 1", "FRDDR_B OUT 3",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "SPDIFOUT IN 2", "FRDDR_C OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 2", "TDM_C Capture",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 2", "TDM_C Capture",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TDMIN_LB IN 2", "TDM_C Loopback",
+ "TDMIN_LB IN 5", "TDM_C Capture",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 4", "PDM Capture",
+ "TODDR_B IN 4", "PDM Capture",
+ "TODDR_C IN 4", "PDM Capture",
+ "TODDR_A IN 6", "TDMIN_LB OUT",
+ "TODDR_B IN 6", "TDMIN_LB OUT",
+ "TODDR_C IN 6", "TDMIN_LB OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker1 Left", "SPK1 OUT_B",
+ "Speaker1 Right", "SPK1 OUT_C",
+ "Speaker1 Right", "SPK1 OUT_D",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+ assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <589824000>,
+ <270950400>,
+ <393216000>;
status = "okay";
- sound-name-prefix = "Linein";
- };
- lineout: audio-codec@1 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7154";
- VDD-supply = <&vcc_3v3>;
- PVDD-supply = <&vcc_5v>;
- status = "okay";
- sound-name-prefix = "Lineout";
+ dai-link@0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link@1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link@2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link@3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link@4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link@5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ dai-link@6 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec@0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec@1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec@2 {
+ sound-dai = <&linein>;
+ };
+
+ };
+
+ dai-link@7 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link@8 {
+ sound-dai = <&pdm>;
+
+ codec {
+ sound-dai = <&dmics>;
+ };
+ };
};
- spdif_dit: audio-codec@2 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
};
};
};
};
-&uart_A {
+&frddr_a {
status = "okay";
- pinctrl-0 = <&uart_a_pins>;
- pinctrl-names = "default";
};
-&uart_AO {
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
};
&ir {
PVDD_B-supply = <&main_12v>;
PVDD_C-supply = <&main_12v>;
PVDD_D-supply = <&main_12v>;
+ sound-name-prefix = "SPK1";
};
};
};
};
+&pdm {
+ pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+ <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&pwm_ab {
status = "okay";
pinctrl-0 = <&pwm_a_x20_pins>;
pinctrl-names = "default";
};
-/* emmc storage */
-&sd_emmc_c {
+&saradc {
status = "okay";
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <180000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vref-supply = <&vddio_ao18>;
};
/* wifi module */
};
};
-&saradc {
+/* emmc storage */
+&sd_emmc_c {
+ status = "disabled";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <180000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifout {
+ pinctrl-0 = <&spdif_out_a20_pins>;
+ pinctrl-names = "default";
status = "okay";
- vref-supply = <&vddio_ao18>;
+};
+
+&tdmif_a {
+ pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+ <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_b {
+ pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+ <&tdmb_din3_pins>, <&mclk_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_c {
+ pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+ <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+ <&mclk_c_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmin_lb {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>;
+ pinctrl-names = "default";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
};
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
*/
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/axg-clkc.h>
-#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ tdmif_a: audio-controller@0 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_A";
+ clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* 16 MiB reserved for Hardware ROM Firmware */
- hwrom_reserved: hwrom@0 {
- reg = <0x0 0x0 0x0 0x1000000>;
- no-map;
- };
+ tdmif_b: audio-controller@1 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_B";
+ clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
+ tdmif_c: audio-controller@2 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_C";
+ clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
+ ao_alt_xtal: ao_alt_xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ clock-output-names = "ao_alt_xtal";
+ #clock-cells = <0>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
};
};
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
- tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller@1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller@2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
+ /* 16 MiB reserved for Hardware ROM Firmware */
+ hwrom_reserved: hwrom@0 {
+ reg = <0x0 0x0 0x0 0x1000000>;
+ no-map;
+ };
- ao_alt_xtal: ao_alt_xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <32000000>;
- clock-output-names = "ao_alt_xtal";
- #clock-cells = <0>;
+ /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
};
soc {
#size-cells = <2>;
ranges;
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
-
- sd_emmc_b: sd@5000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x5000 0x0 0x800>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
- };
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ status = "disabled";
+ };
- sd_emmc_c: mmc@7000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x7000 0x0 0x800>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
- };
+ pdm: audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0x0 0xff632000 0x0 0x34>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PDM";
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ status = "disabled";
};
- audio: bus@ff642000 {
+ periphs: bus@ff634000 {
compatible = "simple-bus";
- reg = <0x0 0xff642000 0x0 0x2000>;
+ reg = <0x0 0xff634000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
-
- clkc_audio: clock-controller@0 {
- compatible = "amlogic,axg-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
- resets = <&reset RESET_AUDIO>;
+ hwrng: rng@18 {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x18 0x0 0x4>;
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
};
- arb: reset-controller@280 {
- compatible = "amlogic,meson-axg-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
+ pinctrl_periphs: pinctrl@480 {
+ compatible = "amlogic,meson-axg-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- tdmin_a: audio-controller@300 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
+ gpio: bank@480 {
+ reg = <0x0 0x00480 0x0 0x40>,
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
+ <0x0 0x00430 0x0 0x3c>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 0 86>;
+ };
- tdmin_b: audio-controller@340 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller@380 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller@3c0 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- status = "disabled";
- };
-
- tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller@540 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller@580 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
- };
-
- cbus: bus@ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-
- gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-gpio-intc";
- reg = <0x0 0xf080 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- status = "disabled";
- };
-
- pwm_ab: pwm@1b000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1b000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@1a000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1a000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- reset: reset-controller@1004 {
- compatible = "amlogic,meson-axg-reset";
- reg = <0x0 0x01004 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- spicc0: spi@13000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x13000 0x0 0x3c>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC0>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc1: spi@15000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x15000 0x0 0x3c>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC1>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c0: i2c@1f000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@1e000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1e000 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@1d000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@1c000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x24000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
-
- uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x23000 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
- };
-
- ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
- status = "disabled";
- };
-
- gic: interrupt-controller@ffc01000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xffc01000 0 0x1000>,
- <0x0 0xffc02000 0 0x2000>,
- <0x0 0xffc04000 0 0x2000>,
- <0x0 0xffc06000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ i2c0_pins: i2c0 {
+ mux {
+ groups = "i2c0_sck",
+ "i2c0_sda";
+ function = "i2c0";
+ };
+ };
- sysctrl: system-controller@0 {
- compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd";
- reg = <0 0 0 0x400>;
+ i2c1_x_pins: i2c1_x {
+ mux {
+ groups = "i2c1_sck_x",
+ "i2c1_sda_x";
+ function = "i2c1";
+ };
+ };
- clkc: clock-controller {
- compatible = "amlogic,axg-clkc";
- #clock-cells = <1>;
+ i2c1_z_pins: i2c1_z {
+ mux {
+ groups = "i2c1_sck_z",
+ "i2c1_sda_z";
+ function = "i2c1";
+ };
};
- };
- };
- mailbox: mailbox@ff63dc00 {
- compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
- reg = <0 0xff63dc00 0 0x400>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
- };
+ i2c2_a_pins: i2c2_a {
+ mux {
+ groups = "i2c2_sck_a",
+ "i2c2_sda_a";
+ function = "i2c2";
+ };
+ };
- periphs: periphs@ff634000 {
- compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ i2c2_x_pins: i2c2_x {
+ mux {
+ groups = "i2c2_sck_x",
+ "i2c2_sda_x";
+ function = "i2c2";
+ };
+ };
- hwrng: rng {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x18 0x0 0x4>;
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
- };
+ i2c3_a6_pins: i2c3_a6 {
+ mux {
+ groups = "i2c3_sda_a6",
+ "i2c3_sck_a7";
+ function = "i2c3";
+ };
+ };
- pinctrl_periphs: pinctrl@480 {
- compatible = "amlogic,meson-axg-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ i2c3_a12_pins: i2c3_a12 {
+ mux {
+ groups = "i2c3_sda_a12",
+ "i2c3_sck_a13";
+ function = "i2c3";
+ };
+ };
- gpio: bank@480 {
- reg = <0x0 0x00480 0x0 0x40>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00520 0x0 0x14>,
- <0x0 0x00430 0x0 0x3c>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 0 86>;
+ i2c3_a19_pins: i2c3_a19 {
+ mux {
+ groups = "i2c3_sda_a19",
+ "i2c3_sck_a20";
+ function = "i2c3";
+ };
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_clk",
- "emmc_cmd",
- "emmc_ds";
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_clk",
+ "emmc_cmd",
+ "emmc_ds";
function = "emmc";
};
};
};
};
- sdio_pins: sdio {
+ eth_rgmii_x_pins: eth-x-rgmii {
mux {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_cmd",
- "sdio_clk";
- function = "sdio";
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
- sdio_clk_gate_pins: sdio_clk_gate {
+ eth_rgmii_y_pins: eth-y-rgmii {
mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
- bias-pull-down;
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
eth_rmii_x_pins: eth-x-rmii {
mux {
groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x";
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x";
function = "eth";
};
};
eth_rmii_y_pins: eth-y-rmii {
mux {
groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y";
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y";
function = "eth";
};
};
- eth_rgmii_x_pins: eth-x-rgmii {
+ mclk_b_pins: mclk_b {
mux {
- groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_b";
+ function = "mclk_b";
};
};
- eth_rgmii_y_pins: eth-y-rgmii {
+ mclk_c_pins: mclk_c {
mux {
- groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_c";
+ function = "mclk_c";
};
};
};
};
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_clk_gate_pins: sdio_clk_gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ };
+ cfg-pull-down {
+ pins = "GPIOX_4";
+ bias-pull-down;
+ };
+ };
+
spdif_in_z_pins: spdif_in_z {
mux {
groups = "spdif_in_z";
};
};
- spdif_out_z_pins: spdif_out_z {
- mux {
- groups = "spdif_out_z";
- function = "spdif_out";
- };
- };
-
spdif_out_a1_pins: spdif_out_a1 {
mux {
groups = "spdif_out_a1";
};
};
+ spdif_out_z_pins: spdif_out_z {
+ mux {
+ groups = "spdif_out_z";
+ function = "spdif_out";
+ };
+ };
+
spi0_pins: spi0 {
mux {
groups = "spi0_miso",
- "spi0_mosi",
- "spi0_clk";
+ "spi0_mosi",
+ "spi0_clk";
function = "spi0";
};
};
};
};
-
spi1_a_pins: spi1_a {
mux {
groups = "spi1_miso_a",
- "spi1_mosi_a",
- "spi1_clk_a";
+ "spi1_mosi_a",
+ "spi1_clk_a";
function = "spi1";
};
};
spi1_x_pins: spi1_x {
mux {
groups = "spi1_miso_x",
- "spi1_mosi_x",
- "spi1_clk_x";
+ "spi1_mosi_x",
+ "spi1_clk_x";
function = "spi1";
};
};
};
};
- i2c0_pins: i2c0 {
- mux {
- groups = "i2c0_sck",
- "i2c0_sda";
- function = "i2c0";
- };
- };
-
- i2c1_z_pins: i2c1_z {
- mux {
- groups = "i2c1_sck_z",
- "i2c1_sda_z";
- function = "i2c1";
- };
- };
-
- i2c1_x_pins: i2c1_x {
- mux {
- groups = "i2c1_sck_x",
- "i2c1_sda_x";
- function = "i2c1";
- };
- };
-
- i2c2_x_pins: i2c2_x {
- mux {
- groups = "i2c2_sck_x",
- "i2c2_sda_x";
- function = "i2c2";
- };
- };
-
- i2c2_a_pins: i2c2_a {
- mux {
- groups = "i2c2_sck_a",
- "i2c2_sda_a";
- function = "i2c2";
- };
- };
-
- i2c3_a6_pins: i2c3_a6 {
- mux {
- groups = "i2c3_sda_a6",
- "i2c3_sck_a7";
- function = "i2c3";
- };
- };
-
- i2c3_a12_pins: i2c3_a12 {
- mux {
- groups = "i2c3_sda_a12",
- "i2c3_sck_a13";
- function = "i2c3";
- };
- };
-
- i2c3_a19_pins: i2c3_a19 {
- mux {
- groups = "i2c3_sda_a19",
- "i2c3_sck_a20";
- function = "i2c3";
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- };
- };
-
- uart_a_cts_rts_pins: uart_a_cts_rts {
- mux {
- groups = "uart_cts_a",
- "uart_rts_a";
- function = "uart_a";
- };
- };
-
- uart_b_x_pins: uart_b_x {
- mux {
- groups = "uart_tx_b_x",
- "uart_rx_b_x";
- function = "uart_b";
- };
- };
-
- uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+ tdma_din0_pins: tdma_din0 {
mux {
- groups = "uart_cts_b_x",
- "uart_rts_b_x";
- function = "uart_b";
+ groups = "tdma_din0";
+ function = "tdma";
};
};
- uart_b_z_pins: uart_b_z {
+ tdma_dout0_x14_pins: tdma_dout0_x14 {
mux {
- groups = "uart_tx_b_z",
- "uart_rx_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x14";
+ function = "tdma";
};
};
- uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+ tdma_dout0_x15_pins: tdma_dout0_x15 {
mux {
- groups = "uart_cts_b_z",
- "uart_rts_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x15";
+ function = "tdma";
};
};
- uart_ao_b_z_pins: uart_ao_b_z {
+ tdma_dout1_pins: tdma_dout1 {
mux {
- groups = "uart_ao_tx_b_z",
- "uart_ao_rx_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_dout1";
+ function = "tdma";
};
};
- uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+ tdma_din1_pins: tdma_din1 {
mux {
- groups = "uart_ao_cts_b_z",
- "uart_ao_rts_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_din1";
+ function = "tdma";
};
};
- mclk_b_pins: mclk_b {
+ tdma_fs_pins: tdma_fs {
mux {
- groups = "mclk_b";
- function = "mclk_b";
+ groups = "tdma_fs";
+ function = "tdma";
};
};
- mclk_c_pins: mclk_c {
+ tdma_fs_slv_pins: tdma_fs_slv {
mux {
- groups = "mclk_c";
- function = "mclk_c";
+ groups = "tdma_fs_slv";
+ function = "tdma";
};
};
};
};
- tdma_fs_pins: tdma_fs {
- mux {
- groups = "tdma_fs";
- function = "tdma";
- };
- };
-
- tdma_fs_slv_pins: tdma_fs_slv {
+ tdmb_din0_pins: tdmb_din0 {
mux {
- groups = "tdma_fs_slv";
- function = "tdma";
+ groups = "tdmb_din0";
+ function = "tdmb";
};
};
- tdma_din0_pins: tdma_din0 {
+ tdmb_din1_pins: tdmb_din1 {
mux {
- groups = "tdma_din0";
- function = "tdma";
+ groups = "tdmb_din1";
+ function = "tdmb";
};
};
- tdma_dout0_x14_pins: tdma_dout0_x14 {
+ tdmb_din2_pins: tdmb_din2 {
mux {
- groups = "tdma_dout0_x14";
- function = "tdma";
+ groups = "tdmb_din2";
+ function = "tdmb";
};
};
- tdma_dout0_x15_pins: tdma_dout0_x15 {
+ tdmb_din3_pins: tdmb_din3 {
mux {
- groups = "tdma_dout0_x15";
- function = "tdma";
+ groups = "tdmb_din3";
+ function = "tdmb";
};
};
- tdma_dout1_pins: tdma_dout1 {
+ tdmb_dout0_pins: tdmb_dout0 {
mux {
- groups = "tdma_dout1";
- function = "tdma";
+ groups = "tdmb_dout0";
+ function = "tdmb";
};
};
- tdma_din1_pins: tdma_din1 {
+ tdmb_dout1_pins: tdmb_dout1 {
mux {
- groups = "tdma_din1";
- function = "tdma";
+ groups = "tdmb_dout1";
+ function = "tdmb";
};
};
- tdmb_sclk_pins: tdmb_sclk {
+ tdmb_dout2_pins: tdmb_dout2 {
mux {
- groups = "tdmb_sclk";
+ groups = "tdmb_dout2";
function = "tdmb";
};
};
- tdmb_sclk_slv_pins: tdmb_sclk_slv {
+ tdmb_dout3_pins: tdmb_dout3 {
mux {
- groups = "tdmb_sclk_slv";
+ groups = "tdmb_dout3";
function = "tdmb";
};
};
};
};
- tdmb_din0_pins: tdmb_din0 {
+ tdmb_sclk_pins: tdmb_sclk {
mux {
- groups = "tdmb_din0";
+ groups = "tdmb_sclk";
function = "tdmb";
};
};
- tdmb_dout0_pins: tdmb_dout0 {
+ tdmb_sclk_slv_pins: tdmb_sclk_slv {
mux {
- groups = "tdmb_dout0";
+ groups = "tdmb_sclk_slv";
function = "tdmb";
};
};
- tdmb_din1_pins: tdmb_din1 {
+ tdmc_fs_pins: tdmc_fs {
mux {
- groups = "tdmb_din1";
- function = "tdmb";
+ groups = "tdmc_fs";
+ function = "tdmc";
};
};
- tdmb_dout1_pins: tdmb_dout1 {
+ tdmc_fs_slv_pins: tdmc_fs_slv {
mux {
- groups = "tdmb_dout1";
- function = "tdmb";
+ groups = "tdmc_fs_slv";
+ function = "tdmc";
};
};
- tdmb_din2_pins: tdmb_din2 {
+ tdmc_sclk_pins: tdmc_sclk {
mux {
- groups = "tdmb_din2";
- function = "tdmb";
+ groups = "tdmc_sclk";
+ function = "tdmc";
};
};
- tdmb_dout2_pins: tdmb_dout2 {
+ tdmc_sclk_slv_pins: tdmc_sclk_slv {
mux {
- groups = "tdmb_dout2";
- function = "tdmb";
+ groups = "tdmc_sclk_slv";
+ function = "tdmc";
};
};
- tdmb_din3_pins: tdmb_din3 {
+ tdmc_din0_pins: tdmc_din0 {
mux {
- groups = "tdmb_din3";
- function = "tdmb";
+ groups = "tdmc_din0";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din1_pins: tdmc_din1 {
+ mux {
+ groups = "tdmc_din1";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din2_pins: tdmc_din2 {
+ mux {
+ groups = "tdmc_din2";
+ function = "tdmc";
};
};
- tdmb_dout3_pins: tdmb_dout3 {
+ tdmc_din3_pins: tdmc_din3 {
mux {
- groups = "tdmb_dout3";
- function = "tdmb";
+ groups = "tdmc_din3";
+ function = "tdmc";
};
};
- tdmc_sclk_pins: tdmc_sclk {
+ tdmc_dout0_pins: tdmc_dout0 {
mux {
- groups = "tdmc_sclk";
+ groups = "tdmc_dout0";
function = "tdmc";
};
};
- tdmc_sclk_slv_pins: tdmc_sclk_slv {
+ tdmc_dout1_pins: tdmc_dout1 {
mux {
- groups = "tdmc_sclk_slv";
+ groups = "tdmc_dout1";
function = "tdmc";
};
};
- tdmc_fs_pins: tdmc_fs {
+ tdmc_dout2_pins: tdmc_dout2 {
mux {
- groups = "tdmc_fs";
+ groups = "tdmc_dout2";
function = "tdmc";
};
};
- tdmc_fs_slv_pins: tdmc_fs_slv {
+ tdmc_dout3_pins: tdmc_dout3 {
mux {
- groups = "tdmc_fs_slv";
+ groups = "tdmc_dout3";
function = "tdmc";
};
};
- tdmc_din0_pins: tdmc_din0 {
+ uart_a_pins: uart_a {
mux {
- groups = "tdmc_din0";
- function = "tdmc";
+ groups = "uart_tx_a",
+ "uart_rx_a";
+ function = "uart_a";
};
};
- tdmc_dout0_pins: tdmc_dout0 {
+ uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
- groups = "tdmc_dout0";
- function = "tdmc";
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
};
};
- tdmc_din1_pins: tdmc_din1 {
+ uart_b_x_pins: uart_b_x {
mux {
- groups = "tdmc_din1";
- function = "tdmc";
+ groups = "uart_tx_b_x",
+ "uart_rx_b_x";
+ function = "uart_b";
};
};
- tdmc_dout1_pins: tdmc_dout1 {
+ uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
mux {
- groups = "tdmc_dout1";
- function = "tdmc";
+ groups = "uart_cts_b_x",
+ "uart_rts_b_x";
+ function = "uart_b";
};
};
- tdmc_din2_pins: tdmc_din2 {
+ uart_b_z_pins: uart_b_z {
mux {
- groups = "tdmc_din2";
- function = "tdmc";
+ groups = "uart_tx_b_z",
+ "uart_rx_b_z";
+ function = "uart_b";
};
};
- tdmc_dout2_pins: tdmc_dout2 {
+ uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
mux {
- groups = "tdmc_dout2";
- function = "tdmc";
+ groups = "uart_cts_b_z",
+ "uart_rts_b_z";
+ function = "uart_b";
};
};
- tdmc_din3_pins: tdmc_din3 {
+ uart_ao_b_z_pins: uart_ao_b_z {
mux {
- groups = "tdmc_din3";
- function = "tdmc";
+ groups = "uart_ao_tx_b_z",
+ "uart_ao_rx_b_z";
+ function = "uart_ao_b_z";
};
};
- tdmc_dout3_pins: tdmc_dout3 {
+ uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
mux {
- groups = "tdmc_dout3";
- function = "tdmc";
+ groups = "uart_ao_cts_b_z",
+ "uart_ao_rts_b_z";
+ function = "uart_ao_b_z";
};
};
};
};
- sram: sram@fffc0000 {
- compatible = "amlogic,meson-axg-sram", "mmio-sram";
- reg = <0x0 0xfffc0000 0x0 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xfffc0000 0x20000>;
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
- cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13000 0x400>;
+ sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-axg-hhi-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ mailbox: mailbox@ff63dc00 {
+ compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+ reg = <0 0xff63dc00 0 0x400>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
+
+ audio: bus@ff642000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff642000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+ clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+
+ resets = <&reset RESET_AUDIO>;
+ };
+
+ toddr_a: audio-controller@100 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x100 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_A";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+ resets = <&arb AXG_ARB_TODDR_A>;
+ status = "disabled";
+ };
+
+ toddr_b: audio-controller@140 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x140 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_B";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+ resets = <&arb AXG_ARB_TODDR_B>;
+ status = "disabled";
+ };
+
+ toddr_c: audio-controller@180 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x180 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_C";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+ resets = <&arb AXG_ARB_TODDR_C>;
+ status = "disabled";
+ };
+
+ frddr_a: audio-controller@1c0 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x1c0 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_A";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ resets = <&arb AXG_ARB_FRDDR_A>;
+ status = "disabled";
+ };
+
+ frddr_b: audio-controller@200 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x200 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_B";
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+ resets = <&arb AXG_ARB_FRDDR_B>;
+ status = "disabled";
+ };
+
+ frddr_c: audio-controller@240 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x240 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_C";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+ resets = <&arb AXG_ARB_FRDDR_C>;
+ status = "disabled";
+ };
+
+ arb: reset-controller@280 {
+ compatible = "amlogic,meson-axg-audio-arb";
+ reg = <0x0 0x280 0x0 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+ };
+
+ tdmin_a: audio-controller@300 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x300 0x0 0x40>;
+ sound-name-prefix = "TDMIN_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_b: audio-controller@340 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x340 0x0 0x40>;
+ sound-name-prefix = "TDMIN_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_c: audio-controller@380 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x380 0x0 0x40>;
+ sound-name-prefix = "TDMIN_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_lb: audio-controller@3c0 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x3c0 0x0 0x40>;
+ sound-name-prefix = "TDMIN_LB";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ spdifout: audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x0 0x480 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
+ tdmout_a: audio-controller@500 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x500 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_b: audio-controller@540 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x540 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
};
- cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13400 0x400>;
+ tdmout_c: audio-controller@580 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x580 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
};
};
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_ao_tx_a",
- "uart_ao_rx_a";
+ "uart_ao_rx_a";
function = "uart_ao_a";
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_ao_cts_a",
- "uart_ao_rts_a";
+ "uart_ao_rts_a";
function = "uart_ao_a";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_ao_tx_b",
- "uart_ao_rx_b";
+ "uart_ao_rx_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_ao_cts_b",
- "uart_ao_rts_b";
+ "uart_ao_rts_b";
function = "uart_ao_b";
};
};
amlogic,has-chip-id;
};
- pwm_AO_ab: pwm@7000 {
- compatible = "amlogic,meson-axg-ao-pwm";
- reg = <0x0 0x07000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
pwm_AO_cd: pwm@2000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x02000 0x0 0x20>;
status = "disabled";
};
- i2c_AO: i2c@5000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x05000 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
status = "disabled";
};
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x05000 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_AO_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,meson-axg-ao-pwm";
+ reg = <0x0 0x07000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
ir: ir@8000 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x8000 0x0 0x20>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
- <&clkc_AO CLKID_AO_SAR_ADC>,
- <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
- <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+ <&clkc_AO CLKID_AO_SAR_ADC>,
+ <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+ <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
status = "disabled";
};
};
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+ reset: reset-controller@1004 {
+ compatible = "amlogic,meson-axg-reset";
+ reg = <0x0 0x01004 0x0 0x9c>;
+ #reset-cells = <1>;
+ };
+
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1b000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1a000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x13000 0x0 0x3c>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x15000 0x0 0x3c>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1c000 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1d000 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1f000 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart_B: serial@23000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x23000 0x0 0x18>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+
+ uart_A: serial@24000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x24000 0x0 0x18>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+ };
+
+ apb: bus@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+ sd_emmc_b: sd@5000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x5000 0x0 0x800>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ };
+
+ sd_emmc_c: mmc@7000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x7000 0x0 0x800>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
+ };
+ };
+
+ sram: sram@fffc0000 {
+ compatible = "amlogic,meson-axg-sram", "mmio-sram";
+ reg = <0x0 0xfffc0000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xfffc0000 0x20000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amlogic,u200", "amlogic,g12a";
+ model = "Amlogic Meson G12A U200 Development Board";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "amlogic,g12a";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ periphs: periphs@ff634000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff634000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ };
+
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ };
+
+ aobus: bus@ff800000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+ uart_AO: serial@3000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x3000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@4000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x4000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+ };
+
+ apb: apb@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+};
linux,cma {
compatible = "shared-dma-pool";
reusable;
- size = <0x0 0xbc00000>;
+ size = <0x0 0x10000000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
pwrc_vpu: power-controller-vpu {
};
};
+ dmcbus: bus@c8838000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+ };
+ };
+
hiubus: bus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
sysctrl: system-controller@0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0 0 0 0x400>;
};
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf0_in_port: endpoint {
- slave-mode;
remote-endpoint = <&main_funnel_out_port>;
};
};
+ };
- /* output port */
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf0_out_port: endpoint {
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint = <&etf0_in_port>;
};
};
+ };
- /* input ports */
- port@1 {
+ main_funnel_in_ports: in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_funnel_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_funnel_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ arm,scatter-gather;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- stm_out_port: endpoint {
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm0_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster0_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm1_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm1_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster0_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm0_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster1_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port1>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm3_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm1_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster1_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm2_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ cluster1_etm2_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port2>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm3_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ cluster1_etm3_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port3>;
+ };
};
};
};
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&etr_in_port>;
};
};
-
- /* replicator input port */
- port@2 {
- reg = <0>;
+ };
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys1_funnel_out_port: endpoint {
remote-endpoint = <&etf1_in_port>;
};
};
-
- /* input port */
- port@1 {
- reg = <0>;
+ };
+ in-ports {
+ port {
csys1_funnel_in_port0: endpoint {
- slave-mode;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf1_in_port: endpoint {
- slave-mode;
remote-endpoint = <&csys1_funnel_out_port>;
};
};
-
- /* output port */
- port@1 {
- reg = <0>;
+ };
+ out-ports {
+ port {
etf1_out_port: endpoint {
remote-endpoint = <&csys2_funnel_in_port1>;
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys2_funnel_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
};
+ };
- /* input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
reg = <0>;
csys2_funnel_in_port0: endpoint {
slave-mode;
};
};
- port@2 {
+ port@1 {
reg = <1>;
csys2_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&main_funnel_in_port2>;
};
-&main_funnel {
- ports {
- port@3 {
- reg = <2>;
- main_funnel_in_port2: endpoint {
- slave-mode;
- remote-endpoint = <&stm_out_port>;
- };
+&main_funnel_in_ports {
+ port@2 {
+ reg = <2>;
+ main_funnel_in_port2: endpoint {
+ remote-endpoint = <&stm_out_port>;
};
};
};
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
- bcm2837-rpi-3-b-plus.dtb
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb
subdir-y += northstar2
subdir-y += stingray
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-cm3-io3.dts"
status = "disabled";
};
- ssp0: ssp@66180000 {
+ ssp0: spi@66180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66180000 0x1000>;
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ssp1: ssp@66190000 {
+ ssp1: spi@66190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66190000 0x1000>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
&i2c1 {
status = "okay";
- pcf8574: pcf8574@20 {
+ pcf8574: pcf8574@27 {
compatible = "nxp,pcf8574a";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- ssp0: ssp@180000 {
+ ssp0: spi@180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ssp1: ssp@190000 {
+ ssp1: spi@190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+
+ ports {
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
};
regulators {
status = "okay";
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
&usbdrd_dwc3 {
dr_mode = "otg";
- extcon = <&muic>;
};
&usbdrd30_phy {
vbus-supply = <&safeout1_reg>;
status = "okay";
+
+ port {
+ usb_to_muic: endpoint {
+ remote-endpoint = <&muic_to_usb>;
+ };
+ };
};
&xxti {
status = "disabled";
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <0 43 0x4>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*/
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
reg = <0x4c>;
};
- eeprom@56 {
+ eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom@57 {
+ eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
crypto = &crypto;
serial0 = &serial0;
serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
cpu: cpus {
interrupts = <0 32 0x4>; /* Level high type */
};
+ serial2: serial@21d0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
+ serial3: serial@21d0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
mmu-masters = <&fsl_mc 0x300 0>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi@20c0000 {
+ qspi: spi@20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3670.dtsi"
+
+/ {
+ model = "HiKey970";
+ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+ aliases {
+ serial6 = &uart6; /* console UART */
+ };
+
+ chosen {
+ stdout-path = "serial6:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* expect bootloader to fill in this region */
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi3670";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@e82b0000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+ <0x0 0xe82b2000 0 0x2000>, /* GICC */
+ <0x0 0xe82b4000 0 0x2000>, /* GICH */
+ <0x0 0xe82b6000 0 0x2000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <1920000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart6_clk: clk_19_2M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ uart6: serial@fff32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart6_clk &uart6_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out: endpoint {
remote-endpoint =
<&etf_in>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
};
};
- port@2 {
+ port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
acpu_funnel_out: endpoint {
remote-endpoint =
<&soc_funnel_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port@6 {
+ port@5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port@7 {
+ port@6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port@8 {
+ port@7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
cpu = <&cpu4>;
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
compatible = "marvell,armada3720", "marvell,armada3710";
cpus {
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
+ wdt: watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
+
+ cpu_misc: system-controller@d000 {
+ compatible = "marvell,armada-3700-cpu-misc",
+ "syscon";
+ reg = <0xd000 0x1000>;
+ };
+
spi0: spi@10600 {
compatible = "marvell,armada-3700-spi";
#address-cells = <1>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 SolidRun ltd.
+ * Based on Marvell MACCHIATOBin board
+ *
+ * Device Tree file for SolidRun's ClearFog GT 8K
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "SolidRun ClearFog GT 8K";
+ compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp1_eth1;
+ ethernet1 = &cp0_eth0;
+ ethernet2 = &cp1_eth2;
+ };
+
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_cp0_eth0: sfp-cp0-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cp0_led0_pins
+ &cp0_led1_pins>;
+ pinctrl-names = "default";
+ /* No designated function for these LEDs at the moment */
+ led0 {
+ label = "clearfog-gt-8k:green:led0";
+ gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led1 {
+ label = "clearfog-gt-8k:green:led1";
+ gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear button */
+ label = "Rear Button";
+ gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+
+ button_1 {
+ /* The wps button */
+ label = "WPS Button";
+ gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32, 33, 34] pci0/1/2 reset
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] GPIO reset button
+ * [40,41] LED0 and LED1
+ * [43] 1512 phy reset
+ * [47] USB VBUS EN (active low)
+ * [48] FAN PWM
+ * [49] SFP+ present signal
+ * [50] TPM interrupt
+ * [51] WLAN0 disable
+ * [52] WLAN1 disable
+ * [53] LTE disable
+ * [54] NFC reset
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ */
+
+ cp0_pci0_reset_pins: pci0-reset-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci1_reset_pins: pci1-reset-pins {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci2_reset_pins: pci2-reset-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_gpio_reset_pins: gpio-reset-pins {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ cp0_led0_pins: led0-pins {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ cp0_led1_pins: led1-pins {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ cp0_fan_pwm_pins: fan-pwm-pins {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ cp0_sfp_present_pins: sfp-present-pins {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ cp0_tpm_irq_pins: tpm-irq-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
+&cp0_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pci0_reset_pins>;
+ reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ sata_reset {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SFP */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ phys = <&cp0_comphy2 0>;
+ sfp = <&sfp_cp0_eth0>;
+};
+
+&cp0_sdhci0 {
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp1_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6] VHV Enable
+ * [7] CP1 SPI0 CSn1 (FXS)
+ * [8] CP1 SPI0 CSn0 (TPM)
+ * [9.11]CP1 SPI0 MOSI/MISO/CLK
+ * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
+ * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
+ * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
+ * [24] Topaz switch reset
+ * [26] Buzzer
+ * [27] CP1 SMI MDIO
+ * [28] CP1 SMI MDC
+ * [29] CP0 10G SFP TX Disable
+ * [30] WPS button
+ * [31] Front panel button
+ */
+
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp1_switch_reset_pins: switch-reset-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ cp1_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp27", "mpp28";
+ marvell,function = "ge";
+ };
+
+ cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ cp1_wps_button_pins: wps-button-pins {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+};
+
+&cp1_sata0 {
+ pinctrl-0 = <&cp0_pci1_reset_pins>;
+ status = "okay";
+};
+
+&cp1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ /* LED0 - GB link
+ * LED1 - on: link, blink: activity
+ */
+ marvell,reg-init = <3 16 0 0x1017>;
+ reg = <0>;
+ };
+
+ switch0: switch0@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_switch_reset_pins>;
+ reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&cp1_eth2>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+
+ switch0phy3: switch0phy3@14 {
+ reg = <0x14>;
+ };
+ };
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* 1G copper */
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&ge_phy>;
+ phys = <&cp1_comphy3 1>;
+};
+
+/* Switch uplink */
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
};
};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/dts-v1/;
method = "smc";
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ idle_states {
+ entry_method = "arm,pcsi";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <80>;
+ exit-latency-us = <160>;
+ min-residency-us = <320>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+ };
+
ap806 {
#address-cells = <2>;
#size-cells = <2>;
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
};
};
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
};
};
};
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * The cooling maps are always empty as there are no cooling devices.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu4: ap-thermal-cpu4 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
};
- cpu@200 {
+ cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x200>;
enable-method = "psci";
};
- cpu@201 {
+ cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x201>;
enable-method = "psci";
};
- cpu@300 {
+ cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x300>;
enable-method = "psci";
};
- cpu@301 {
+ cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x301>;
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
*/
#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
#include "armada-common.dtsi"
* save one indentation level
*/
CP110_NAME: CP110_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&CP110_LABEL(thermal) 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
&CP110_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
+ interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space@CP110_BASE {
dma-coherent;
CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
};
CP110_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(syscon0): system-controller@440000 {
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+ CP110_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
CP110_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
CP110_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197b";
reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
status = "disabled";
};
+ spis1: spi@10013000 {
+ compatible = "mediatek,mt2712-spi-slave";
+ reg = <0 0x10013000 0 0x100>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+ status = "disabled";
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2712-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>;
--- /dev/null
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Bananapi BPI-R64";
+ compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "bpi-r64:pio:green";
+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red {
+ label = "bpi-r64:pio:red";
+ gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pio {
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
+ */
+ asm_sel {
+ gpio-hog;
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_mclk_bclk_ws",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+
+ conf {
+ pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+ "I2S_WS", "I2S_MCLK";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
+&sata {
+ status = "disable";
+};
+
+&sata_phy {
+ status = "disable";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
};
memory {
- reg = <0 0x40000000 0 0x3F000000>;
+ reg = <0 0x40000000 0 0x20000000>;
};
reg_1p8v: regulator-1p8v {
};
};
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
};
};
-&bch {
- status = "disabled";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- pinctrl-names = "default";
- pinctrl-0 = <ð_pins>;
- status = "okay";
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy5>;
- };
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "sgmii";
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
cpu1: cpu@1 {
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
};
method = "smc";
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
#reset-cells = <1>;
};
+ timer: timer@10004000 {
+ compatible = "mediatek,mt7622-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10004000 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
+ <&topckgen CLK_TOP_RTC>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
scpsys: scpsys@10006000 {
compatible = "mediatek,mt7622-scpsys",
"syscon";
<0 0x10360000 0 0x2000>;
};
+ cci: cci@10390000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x10390000 0 0x1000>;
+ ranges = <0 0 0x10390000 0x10000>;
+
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
auxadc: adc@11001000 {
compatible = "mediatek,mt7622-auxadc";
reg = <0 0x11001000 0 0x1000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
+
+ bluetooth {
+ compatible = "mediatek,mt7622-bluetooth";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
};
nandc: nfi@1100d000 {
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/memory/tegra186-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h>
#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
+ nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+ <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc2_3v3>;
+ pinctrl-1 = <&sdmmc2_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+ <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0x9>;
+ nvidia,dqs-trim = <63>;
+ mmc-hs400-1_8v;
status = "disabled";
};
<0 0x0c380000 0 0x10000>,
<0 0x0c390000 0 0x10000>;
reg-names = "pmc", "wake", "aotag", "scratch";
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc2_3v3: sdmmc2-3v3 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc2_1v8: sdmmc2-1v8 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
ccplex@e000000 {
};
gen1_i2c: i2c@3160000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03160000 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
cam_i2c: i2c@3180000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03180000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* shares pads with dpaux1 */
dp_aux_ch1_i2c: i2c@3190000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03190000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* shares pads with dpaux0 */
dp_aux_ch0_i2c: i2c@31b0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031b0000 0x10000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen7_i2c: i2c@31c0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031c0000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen9_i2c: i2c@31e0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031e0000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen2_i2c: i2c@c240000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c240000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen8_i2c: i2c@c250000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c250000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
vddio_sdmmc: ldo2 {
regulator-name = "VDDIO_SDMMC";
- /*
- * Technically this supply should have
- * a supported range from 1.8 - 3.3 V.
- * However, that would cause the SDHCI
- * driver to request 2.7 V upon access
- * and that in turn will cause traffic
- * to be broken. Leave it at 3.3 V for
- * now.
- */
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
status = "okay";
bus-width = <8>;
non-removable;
+ vqmmc-supply = <&vdd_1v8>;
};
clocks {
sdhci@700b0000 {
status = "okay";
bus-width = <4>;
- no-1-8-v;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#power-domain-cells = <0>;
};
};
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
fuse@7000f800 {
clock-names = "sdhci";
resets = <&tegra_car 14>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x4>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+ <&tegra_car TEGRA210_CLK_PLL_C4>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 9>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 69>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x3>;
+ nvidia,default-trim = <0x3>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 15>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ nvidia,dqs-trim = <40>;
+ mmc-hs400-1_8v;
status = "disabled";
};
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
};
};
+&spmi_bus {
+ pm8916_0: pm8916@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
+
&wcd_codec {
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
/ {
model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
};
};
};
};
+
+&spmi_bus {
+ pmic@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
#include <dt-bindings/thermal/thermal.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8916";
- compatible = "qcom,msm8916";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@4 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8996";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- apcs: syscon@9820000 {
- compatible = "syscon";
- reg = <0x9820000 0x1000>;
- };
-
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8996-apcs-hmss-global";
reg = <0x9820000 0x1000>;
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
- qcom,ipc = <&apcs 16 8>;
+ mboxes = <&apcs_glb 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
};
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 10>;
+ mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 14>;
+ mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 26>;
+ mboxes = <&apcs_glb 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-mtp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+ compatible = "qcom,msm8998-mtp";
+
+ qcom,board-id = <8 0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include "msm8998.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ thermal-zones {
+ battery-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ battery_crit: trip0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ skin_alert: trip0 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ skip_crit: trip1 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+ vreg_15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ qcom,msm-id = <292 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
+
+ rmtfs {
+ compatible = "qcom,rmtfs-mem";
+
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
+ clocks {
+ xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_0: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_0: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_1: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_1: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_2: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_2: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_3: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_3: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_100: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_100: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_101: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_101: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_102: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_102: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_103: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_103: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8998";
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal4 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal5 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal6 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal7 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rpm_msg_ram: memory@68000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x778000 0x7000>;
+ };
+
+ qfprom: qfprom@780000 {
+ compatible = "qcom,qfprom";
+ reg = <0x780000 0x621c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x100000 0xb0000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,msm8998-pinctrl";
+ reg = <0x3400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ spmi_bus: spmi@800f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x800f000 0x1000>,
+ <0x8400000 0x1000000>,
+ <0x9400000 0x1000000>,
+ <0xa400000 0x220000>,
+ <0x800a000 0x3000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ tsens0: thermal@10aa000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10aa000 0x2000>;
+
+ #qcom,sensors = <12>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal@10ad000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10ad000 0x2000>;
+
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x20000>;
+ };
+
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8998-apcs-hmss-global";
+ reg = <0x17911000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ blsp2_uart1: serial@c1b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc1b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ timer@17920000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17920000 0x1000>;
+
+ frame@17921000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17921000 0x1000>,
+ <0x17922000 0x1000>;
+ };
+
+ frame@17923000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17923000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17924000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17924000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17925000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17925000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17926000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17926000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17927000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17927000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17928000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17928000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17b00000 0x100000>; /* GICR * 8 */
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pm8916_gpios: gpios@c000 {
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/* Copyright 2018 Google LLC. */
-#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm8998 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm8998_temp>;
+
+ trips {
+ pm8998_alert0: pm8998-alert0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm8998_crit: pm8998-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&spmi_bus {
pm8998_lsid0: pmic@0 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8998_pon: pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ pm8998_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8998_coincell: coincell@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ status = "disabled";
+ };
+
+ pm8998_adc: adc@3100 {
+ compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pm8998_gpio: gpios@c000 {
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_gpio: gpios@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmi8998_lsid1: pmic@3 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
/dts-v1/;
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
/ {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2a_1p125: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_2p7: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a_3p0: ldo19 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
};
&i2c10 {
status = "okay";
};
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Until we have Type C hooked up we'll force this as host. */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ /*
+ * Though the USB block on SDM845 can support host, there's no vbus
+ * signal for this port on MTP. Thus (unless you have a non-compliant
+ * hub that works without vbus) the only sensible thing is to force
+ * peripheral mode.
+ */
+ dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb2_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_i2c10_default {
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
#power-domain-cells = <1>;
};
+ qfprom@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0x784000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx-trim-primary@1eb {
+ reg = <0x1eb 0x1>;
+ bits = <1 4>;
+ };
+
+ qusb2s_hstx_trim: hstx-trim-secondary@1eb {
+ reg = <0x1eb 0x2>;
+ bits = <6 4>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x8c0000 0x6000>;
};
};
+ usb_1_hsphy: phy@88e2000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e2000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ };
+
+ usb_2_hsphy: phy@88e3000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e3000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ };
+
+ usb_1_qmpphy: phy@88e9000 {
+ compatible = "qcom,sdm845-qmp-usb3-phy";
+ reg = <0x88e9000 0x18c>,
+ <0x88e8000 0x10>;
+ reg-names = "reg-base", "dp_com";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ usb_1_ssphy: lane@88e9200 {
+ reg = <0x88e9200 0x128>,
+ <0x88e9400 0x200>,
+ <0x88e9c00 0x218>,
+ <0x88e9a00 0x100>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+ usb_2_qmpphy: phy@88eb000 {
+ compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+ reg = <0x88eb000 0x18c>;
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+ <&gcc GCC_USB3_PHY_SEC_BCR>;
+ reset-names = "phy", "common";
+
+ usb_2_ssphy: lane@88eb200 {
+ reg = <0x88eb200 0x128>,
+ <0x88eb400 0x1fc>,
+ <0x88eb800 0x218>,
+ <0x88e9600 0x70>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ usb_1_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0xa600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_2: usb@a8f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa8f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ usb_2_dwc3: dwc3@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0xa800000 0xcd00>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0xaf00000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0xc263000 0x1ff>, /* TM */
#thermal-sensor-cells = <1>;
};
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sdm845-aoss-cc";
+ reg = <0xc2a0000 0x31000>;
+ #reset-cells = <1>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/ {
+ compatible = "renesas,r8a774a1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a57_0: cpu@0 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc 0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc 1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc 5>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc 6>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc 7>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc 8>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc 12>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc 21>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>, <&a57_1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a774a1-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 905>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a774a1";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a774a1-cpg-mssr";
+ reg = <0 0xe6150000 0 0x0bb0>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a774a1-rst";
+ reg = <0 0xe6160000 0 0x018c>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a774a1-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a774a1-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>,
+ <0 0xe61a8000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 407>;
+ };
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a774a1",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a774a1",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb3_phy0: usb-phy@e65ee000 {
+ compatible = "renesas,r8a774a1-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ ipmmu_ds0: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 1>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_hc: mmu@e6570000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6570000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 2>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mp: mmu@ec670000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xec670000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 4>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv0: mmu@fd800000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd800000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 5>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv1: mmu@fd950000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd950000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 6>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 8>;
+ power-domains = <&sysc 14>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 9>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a774a1",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 0x40>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE 10>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ xhci0: usb@ee000000 {
+ compatible = "renesas,xhci-r8a774a1",
+ "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774a1-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ohci1: usb@ee0a0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0a0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 408>;
+ };
+
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 615>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 601>;
+ iommus = <&ipmmu_vi0 10>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vc0 19>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
port@1 {
vin0csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin0>;
+ remote-endpoint = <&csi21vin0>;
};
};
};
port@1 {
vin1csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin1>;
+ remote-endpoint = <&csi21vin1>;
};
};
};
port@1 {
vin2csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin2>;
+ remote-endpoint = <&csi21vin2>;
};
};
};
port@1 {
vin3csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin3>;
+ remote-endpoint = <&csi21vin3>;
};
};
};
port@1 {
vin4csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin4>;
+ remote-endpoint = <&csi21vin4>;
};
};
};
port@1 {
vin5csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin5>;
+ remote-endpoint = <&csi21vin5>;
};
};
};
port@1 {
vin6csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin6>;
+ remote-endpoint = <&csi21vin6>;
};
};
};
port@1 {
vin7csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin7>;
+ remote-endpoint = <&csi21vin7>;
};
};
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 4>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock6 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock6 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
};
};
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
};
};
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
+
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
status = "disabled";
};
- arm_cc630p: crypto@e6601000 {
- compatible = "arm,cryptocell-630p-ree";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xe6601000 0 0x1000>;
- clocks = <&cpg CPG_MOD 229>;
- resets = <&cpg 229>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- };
-
i2c3: i2c@e66d0000 {
#address-cells = <1>;
#size-cells = <0>;
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
"renesas,rcar-gen3-usbhs";
reg = <0 0xe659c000 0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 705>;
+ clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
<&usb_dmac3 0>, <&usb_dmac3 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 705>;
+ resets = <&cpg 705>, <&cpg 700>;
status = "disabled";
};
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin4>;
+ remote-endpoint = <&csi41vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin5>;
+ remote-endpoint = <&csi41vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin6>;
+ remote-endpoint = <&csi41vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin7>;
+ remote-endpoint = <&csi41vin7>;
};
};
};
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ohci";
reg = <0 0xee0e0000 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee0e0100 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0e0200 0 0x700>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
#phy-cells = <0>;
status = "disabled";
};
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>;
status = "disabled";
port@3 {
reg = <3>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7795-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7796 SoC
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
*/
power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- companion= <&ohci0>;
+ companion = <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- companion= <&ohci1>;
+ companion = <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
du: display@feb00000 {
compatible = "renesas,du-r8a7796";
- reg = <0 0xfeb00000 0 0x70000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0";
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2>;
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7796-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a77965-m3nulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+ model = "Renesas M3NULCB Kingfisher board based on r8a77965";
+ compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+ "renesas,r8a77965";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas M3NULCB board based on r8a77965";
+ compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77965 SoC
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
*
* Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
*
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77965-sysc.h>
-#define CPG_AUDIO_CLK_I 10
+#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
/ {
compatible = "renesas,r8a77965";
clock-frequency = <0>;
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <960000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
a57_1: cpu@1 {
power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
L2_CA57: cache-controller-0 {
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
};
hsusb: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7796",
+ compatible = "renesas,usbhs-r8a77965",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7300000 {
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
ipmmu_ds0: mmu@e6740000 {
status = "disabled";
};
+ can0: can@e6c30000 {
+ reg = <0 0xe6c30000 0 0x1000>;
+ /* placeholder */
+ };
+
+ can1: can@e6c38000 {
+ reg = <0 0xe6c38000 0 0x1000>;
+ /* placeholder */
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 8>;
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
};
rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- /* placeholder */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
rcar_sound,dvc {
dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
};
dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
};
};
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
rcar_sound,src {
src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
};
src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- port@1 {
- reg = <1>;
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
};
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77965",
"renesas,rcar-gen3-xhci";
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
compatible = "renesas,usb2-phy-r8a77965",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
status = "disabled";
};
+ sata: sata@ee300000 {
+ compatible = "renesas,sata-r8a77965",
+ "renesas,rcar-gen3-sata";
+ reg = <0 0xee300000 0 0x200000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
status = "disabled";
};
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
regulator-always-on;
};
+ vcc_vddq_vin0: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_VDDQ_VIN0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&vcc_d3_3v>;
function = "i2c0";
};
+ mmc_pins: mmc_3_3v {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <3300>;
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
};
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_d3_3v>;
+ vqmmc-supply = <&vcc_vddq_vin0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77970 SoC
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
i2c4 = &i2c4;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
method = "smc";
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
reg = <0 0xe6060000 0 0x504>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77970-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77970-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
#iommu-cells = <1>;
};
+ mmc0: mmc@ee140000 {
+ compatible = "renesas,sdhi-r8a77970",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
status = "okay";
};
+&pciec {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_rgmii";
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ osc1_clk: osc1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&osc1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
};
&extal_clk {
};
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77980 SoC
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
i2c5 = &i2c5;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
};
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value must be overridden by the board */
clock-frequency = <0>;
};
- extal_clk: extal {
+ extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- extalr_clk: extalr {
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
- /* This value must be overridden by the board */
clock-frequency = <0>;
};
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77980-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77980",
"renesas,rcar-gen3-gpio";
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77980-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77980-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
status = "disabled";
};
+ pcie_phy: pcie-phy@e65d0000 {
+ compatible = "renesas,r8a77980-pcie-phy";
+ reg = <0 0xe65d0000 0 0x8000>;
+ #phy-cells = <0>;
+ clocks = <&cpg CPG_MOD 319>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77980-canfd",
"renesas,rcar-gen3-canfd";
};
};
- ipmmu_ds1: mmu@e7740000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7740000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 0>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip0: mmu@e7b00000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7b00000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip1: mmu@e7960000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7960000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_ir: mmu@ff8b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xff8b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 3>;
- power-domains = <&sysc R8A77980_PD_A3IR>;
- #iommu-cells = <1>;
- };
-
- ipmmu_mm: mmu@e67b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe67b0000 0 0x1000>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xffc80000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 10>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vc0: mmu@fe6b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfe6b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 12>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vi0: mmu@febd0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfebd0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 14>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a77980",
"renesas,etheravb-rcar-gen3";
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin0csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin0>;
+ };
+ };
+ };
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ status = "disabled";
+ resets = <&cpg 810>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin1csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin1>;
+ };
+ };
+ };
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin2csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin2>;
+ };
+ };
+ };
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin3csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin3>;
+ };
+ };
+ };
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin4csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin5csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin5>;
+ };
+ };
+ };
+ };
+
+ vin6: video@e6ef6000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin6csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin6>;
+ };
+ };
+ };
+ };
+
+ vin7: video@e6ef7000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin7csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin7>;
+ };
+ };
+ };
+ };
+
+ vin8: video@e6ef8000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef8000 0 0x1000>;
+ interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ vin9: video@e6ef9000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef9000 0 0x1000>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 627>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 627>;
+ status = "disabled";
+ };
+
+ vin10: video@e6efa000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efa000 0 0x1000>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 625>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 625>;
+ status = "disabled";
+ };
+
+ vin11: video@e6efb000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efb000 0 0x1000>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 618>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 618>;
+ status = "disabled";
+ };
+
+ vin12: video@e6efc000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efc000 0 0x1000>;
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 612>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 612>;
+ status = "disabled";
+ };
+
+ vin13: video@e6efd000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efd000 0 0x1000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 608>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 608>;
+ status = "disabled";
+ };
+
+ vin14: video@e6efe000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efe000 0 0x1000>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 605>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 605>;
+ status = "disabled";
+ };
+
+ vin15: video@e6eff000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6eff000 0 0x1000>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 604>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 604>;
+ status = "disabled";
+ };
+
dmac1: dma-controller@e7300000 {
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
gether: ethernet@e7400000 {
status = "disabled";
};
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ir: mmu@ff8b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xff8b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 3>;
+ power-domains = <&sysc R8A77980_PD_A3IR>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt: mmu@ffc80000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xffc80000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 10>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 12>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 14>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip0: mmu@e7b00000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7b00000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip1: mmu@e7960000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7960000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
mmc0: mmc@ee140000 {
compatible = "renesas,sdhi-r8a77980",
"renesas,rcar-gen3-sdhi";
resets = <&cpg 408>;
};
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77980",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <
+ 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
+ >;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
+ 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148
+ IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ status = "disabled";
+ };
+
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x5000>;
resets = <&cpg 603>;
};
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi40>;
+ };
+ csi40vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi40>;
+ };
+ csi40vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi40>;
+ };
+ csi40vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi40>;
+ };
+ };
+ };
+ };
+
+ csi41: csi2@feab0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeab0000 0 0x10000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi41vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi41>;
+ };
+ csi41vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi41>;
+ };
+ csi41vin6: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin6csi41>;
+ };
+ csi41vin7: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin7csi41>;
+ };
+ };
+ };
+ };
+
du: display@feb00000 {
compatible = "renesas,du-r8a77980",
"renesas,du-r8a77970";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <®_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&avb {
};
};
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
&ehci0 {
status = "okay";
};
clock-frequency = <48000000>;
};
+&i2c0 {
+ status = "okay";
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+ <17 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
&ohci0 {
status = "okay";
};
};
};
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ pwm3_pins: pwm3 {
+ groups = "pwm3_b";
+ function = "pwm3";
+ };
+
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+
usb0_pins: usb {
groups = "usb0_b";
function = "usb0";
};
};
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
status = "okay";
};
+&vin4 {
+ status = "okay";
+};
+
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Device Tree Source for the r8a77990 SoC
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77990-sysc.h>
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
device_type = "cpu";
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
compatible = "arm,cortex-a53", "arm,armv8";
reg = <1>;
device_type = "cpu";
- power-domains = <&sysc 6>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller-0 {
compatible = "cache";
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77990_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
method = "smc";
};
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 906>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6690000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6690000 0 0x40>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1003>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1003>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
#power-domain-cells = <1>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+ };
+
ipmmu_ds0: mmu@e6740000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe6740000 0 0x1000>;
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
#address-cells = <1>;
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a77990",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 310>;
- clock-names = "fck";
- power-domains = <&sysc 32>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin4csi40: endpoint {
+ remote-endpoint= <&csi40vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin5csi40: endpoint {
+ remote-endpoint= <&csi40vin5>;
+ };
+ };
+ };
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77990",
"renesas,rcar-gen3-xhci";
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
+ vspb0: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 626>;
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 631>;
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x7000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x7000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi40>;
+ };
+ csi40vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi40>;
+ };
+ };
+ };
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77990";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ vsps = <&vspd0 0 &vspd1 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
/*
* Device Tree Source for the Draak board
*
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*/
stdout-path = "serial0:115200n8";
};
- vga {
- compatible = "vga-connector";
+ composite-in {
+ compatible = "composite-video-connector";
port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
};
};
};
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
};
};
};
- composite-in {
- compatible = "composite-video-connector";
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
port {
- composite_con_in: endpoint {
- remote-endpoint = <&adv7180_in>;
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
};
};
};
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <®_3p3v>;
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
};
};
};
regulator-always-on;
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-};
-
-&extal_clk {
- clock-frequency = <48000000>;
-};
+ vga {
+ compatible = "vga-connector";
-&pfc {
- avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_mii";
- function = "avb0";
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
};
};
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
+ vga-encoder {
+ compatible = "adi,adv7123";
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
};
- pwm0_pins: pwm0 {
- groups = "pwm0_c";
- function = "pwm0";
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
};
+};
- pwm1_pins: pwm1 {
- groups = "pwm1_c";
- function = "pwm1";
- };
+&avb {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
- scif2_pins: scif2 {
- groups = "scif2_data";
- function = "scif2";
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
};
+};
- sdhi2_pins: sd2 {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
- sdhi2_pins_uhs: sd2_uhs {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x12_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
};
+};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
- function = "vin4";
- };
+&ehci0 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
};
&i2c0 {
pinctrl-names = "default";
status = "okay";
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
};
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+ reg-names = "main", "edid", "packet", "cec";
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+ /* Depends on LVDS */
+ max-clock = <135000000>;
+ min-vrefresh = <50>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
};
};
};
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&i2c1 {
status = "okay";
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
+&lvds0 {
status = "okay";
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&x12_clk>;
- clock-names = "du.0", "du.1", "dclkin.0";
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
-&ehci0 {
- status = "okay";
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
status = "okay";
};
-&avb {
- pinctrl-0 = <&avb0_pins>;
+&pfc {
+ avb0_pins: avb {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0_c";
+ function = "pwm0";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_c";
+ function = "pwm1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ vin4_pins_cvbs: vin4 {
+ groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ function = "vin4";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+
status = "okay";
+};
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
- };
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
};
&scif2 {
status = "okay";
};
-&pwm0 {
- pinctrl-0 = <&pwm0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77995 SoC
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
};
dmac1: dma-controller@e7300000 {
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
};
ipmmu_ds0: mmu@e6740000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
};
};
};
video-receiver@70 {
compatible = "adi,adv7482";
- reg = <0x70>;
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
#address-cells = <1>;
#size-cells = <0>;
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
- reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
};
};
chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+ model = "Rockchip PX30 EVB";
+ compatible = "rockchip,px30-evb", "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ esc-key {
+ label = "esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1310000>;
+ };
+
+ home-key {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ press-threshold-microvolt = <624000>;
+ };
+
+ menu-key {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <987000>;
+ };
+
+ vol-down-key {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ vol-up-key {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins =
+ <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+ compatible = "rockchip,px30";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &gmac;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1050000 1050000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1175000 1175000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1300000 1300000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopb_out>, <&vopl_out>;
+ status = "disabled";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+
+ pmu: power-management@ff000000 {
+ compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff000000 0x0 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,px30-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_LOGIC */
+ pd_usb@PX30_PD_USB {
+ reg = <PX30_PD_USB>;
+ clocks = <&cru HCLK_HOST>,
+ <&cru HCLK_OTG>,
+ <&cru SCLK_OTG_ADP>;
+ pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+ };
+ pd_sdcard@PX30_PD_SDCARD {
+ reg = <PX30_PD_SDCARD>;
+ clocks = <&cru HCLK_SDMMC>,
+ <&cru SCLK_SDMMC>;
+ pm_qos = <&qos_sdmmc>;
+ };
+ pd_gmac@PX30_PD_GMAC {
+ reg = <PX30_PD_GMAC>;
+ clocks = <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>,
+ <&cru SCLK_MAC_REF>,
+ <&cru SCLK_GMAC_RX_TX>;
+ pm_qos = <&qos_gmac>;
+ };
+ pd_mmc_nand@PX30_PD_MMC_NAND {
+ reg = <PX30_PD_MMC_NAND>;
+ clocks = <&cru HCLK_NANDC>,
+ <&cru HCLK_EMMC>,
+ <&cru HCLK_SDIO>,
+ <&cru HCLK_SFC>,
+ <&cru SCLK_EMMC>,
+ <&cru SCLK_NANDC>,
+ <&cru SCLK_SDIO>,
+ <&cru SCLK_SFC>;
+ pm_qos = <&qos_emmc>, <&qos_nand>,
+ <&qos_sdio>, <&qos_sfc>;
+ };
+ pd_vpu@PX30_PD_VPU {
+ reg = <PX30_PD_VPU>;
+ clocks = <&cru ACLK_VPU>,
+ <&cru HCLK_VPU>,
+ <&cru SCLK_CORE_VPU>;
+ pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+ };
+ pd_vo@PX30_PD_VO {
+ reg = <PX30_PD_VO>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru ACLK_VOPB>,
+ <&cru ACLK_VOPL>,
+ <&cru DCLK_VOPB>,
+ <&cru DCLK_VOPL>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VOPB>,
+ <&cru HCLK_VOPL>,
+ <&cru PCLK_MIPI_DSI>,
+ <&cru SCLK_RGA_CORE>,
+ <&cru SCLK_VOPB_PWM>;
+ pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+ <&qos_vop_m0>, <&qos_vop_m1>;
+ };
+ pd_vi@PX30_PD_VI {
+ reg = <PX30_PD_VI>;
+ clocks = <&cru ACLK_CIF>,
+ <&cru ACLK_ISP>,
+ <&cru HCLK_CIF>,
+ <&cru HCLK_ISP>,
+ <&cru SCLK_ISP>;
+ pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+ <&qos_isp_wr>, <&qos_isp_m1>,
+ <&qos_vip>;
+ };
+ pd_gpu@PX30_PD_GPU {
+ reg = <PX30_PD_GPU>;
+ clocks = <&cru SCLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+ };
+
+ pmugrf: syscon@ff010000 {
+ compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xff010000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,px30-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-bootloader = <BOOT_BL_DOWNLOAD>;
+ mode-fastboot = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ };
+ };
+
+ uart0: serial@ff030000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff030000 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 0>, <&dmac 1>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ i2s1_2ch: i2s@ff070000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff070000 0x0 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 18>, <&dmac 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+ &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s2_2ch: i2s@ff080000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 20>, <&dmac 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+ &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff131000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xff131000 0 0x1000>,
+ <0x0 0xff132000 0 0x2000>,
+ <0x0 0xff134000 0 0x2000>,
+ <0x0 0xff136000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ grf: syscon@ff140000 {
+ compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff140000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ io_domains: io-domains {
+ compatible = "rockchip,px30-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ uart1: serial@ff158000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff158000 0x0 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 2>, <&dmac 3>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff160000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff160000 0x0 0x100>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 4>, <&dmac 5>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff168000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff168000 0x0 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 6>, <&dmac 7>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff170000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff170000 0x0 0x100>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 8>, <&dmac 9>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+ status = "disabled";
+ };
+
+ uart5: serial@ff178000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff178000 0x0 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 10>, <&dmac 11>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff180000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff180000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ff190000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff190000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff1a0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1a0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff1b0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1b0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1d0000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 12>, <&dmac 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d8000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d8000 0x0 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 14>, <&dmac 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@ff1e0000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff1e0000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT_NS>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff200000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff200010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff200020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff200030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@ff208000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@ff208010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@ff208020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm6_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@ff208030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rktimer: timer@ff210000 {
+ compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+ reg = <0x0 0xff210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+ clock-names = "pclk", "timer";
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac: dmac@ff240000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff240000 0x0 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+ };
+
+ saradc: saradc@ff288000 {
+ compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+ reg = <0x0 0xff288000 0x0 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC_P>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0x0 0xff2b0000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks = <&cru PLL_NPLL>;
+ assigned-clock-rates = <1188000000>;
+ };
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0x0 0xff2bc000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks =
+ <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+ <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+ assigned-clock-rates =
+ <1200000000>, <100000000>,
+ <26000000>, <600000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+ };
+
+ usb20_otg: usb@ff300000 {
+ compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff300000 0x0 0x40000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@ff340000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff340000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@ff350000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff350000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@ff360000 {
+ compatible = "rockchip,px30-gmac";
+ reg = <0x0 0xff360000 0x0 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+ <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+ <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac", "clk_mac_speed";
+ rockchip,grf = <&grf>;
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+ power-domains = <&power PX30_PD_GMAC>;
+ resets = <&cru SRST_GMAC_A>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@ff370000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff370000 0x0 0x4000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ power-domains = <&power PX30_PD_SDCARD>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@ff380000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff380000 0x0 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff390000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff390000 0x0 0x4000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ vopb: vop@ff460000 {
+ compatible = "rockchip,px30-vop-big";
+ reg = <0x0 0xff460000 0x0 0xefc>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+ <&cru HCLK_VOPB>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopb_mmu: iommu@ff460f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff460f00 0x0 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl: vop@ff470000 {
+ compatible = "rockchip,px30-vop-lit";
+ reg = <0x0 0xff470000 0x0 0xefc>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+ <&cru HCLK_VOPL>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopl_mmu: iommu@ff470f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff470f00 0x0 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ qos_gmac: qos@ff518000 {
+ compatible = "syscon";
+ reg = <0x0 0xff518000 0x0 0x20>;
+ };
+
+ qos_gpu: qos@ff520000 {
+ compatible = "syscon";
+ reg = <0x0 0xff520000 0x0 0x20>;
+ };
+
+ qos_sdmmc: qos@ff52c000 {
+ compatible = "syscon";
+ reg = <0x0 0xff52c000 0x0 0x20>;
+ };
+
+ qos_emmc: qos@ff538000 {
+ compatible = "syscon";
+ reg = <0x0 0xff538000 0x0 0x20>;
+ };
+
+ qos_nand: qos@ff538080 {
+ compatible = "syscon";
+ reg = <0x0 0xff538080 0x0 0x20>;
+ };
+
+ qos_sdio: qos@ff538100 {
+ compatible = "syscon";
+ reg = <0x0 0xff538100 0x0 0x20>;
+ };
+
+ qos_sfc: qos@ff538180 {
+ compatible = "syscon";
+ reg = <0x0 0xff538180 0x0 0x20>;
+ };
+
+ qos_usb_host: qos@ff540000 {
+ compatible = "syscon";
+ reg = <0x0 0xff540000 0x0 0x20>;
+ };
+
+ qos_usb_otg: qos@ff540080 {
+ compatible = "syscon";
+ reg = <0x0 0xff540080 0x0 0x20>;
+ };
+
+ qos_isp_128: qos@ff548000 {
+ compatible = "syscon";
+ reg = <0x0 0xff548000 0x0 0x20>;
+ };
+
+ qos_isp_rd: qos@ff548080 {
+ compatible = "syscon";
+ reg = <0x0 0xff548080 0x0 0x20>;
+ };
+
+ qos_isp_wr: qos@ff548100 {
+ compatible = "syscon";
+ reg = <0x0 0xff548100 0x0 0x20>;
+ };
+
+ qos_isp_m1: qos@ff548180 {
+ compatible = "syscon";
+ reg = <0x0 0xff548180 0x0 0x20>;
+ };
+
+ qos_vip: qos@ff548200 {
+ compatible = "syscon";
+ reg = <0x0 0xff548200 0x0 0x20>;
+ };
+
+ qos_rga_rd: qos@ff550000 {
+ compatible = "syscon";
+ reg = <0x0 0xff550000 0x0 0x20>;
+ };
+
+ qos_rga_wr: qos@ff550080 {
+ compatible = "syscon";
+ reg = <0x0 0xff550080 0x0 0x20>;
+ };
+
+ qos_vop_m0: qos@ff550100 {
+ compatible = "syscon";
+ reg = <0x0 0xff550100 0x0 0x20>;
+ };
+
+ qos_vop_m1: qos@ff550180 {
+ compatible = "syscon";
+ reg = <0x0 0xff550180 0x0 0x20>;
+ };
+
+ qos_vpu: qos@ff558000 {
+ compatible = "syscon";
+ reg = <0x0 0xff558000 0x0 0x20>;
+ };
+
+ qos_vpu_r128: qos@ff558080 {
+ compatible = "syscon";
+ reg = <0x0 0xff558080 0x0 0x20>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,px30-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio0@ff040000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff040000 0x0 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@ff250000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff250000 0x0 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@ff260000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff260000 0x0 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@ff270000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff270000 0x0 0x100>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+ bias-disable;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_smt: pcfg-pull-none-smt {
+ bias-disable;
+ input-schmitt-enable;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ pcfg_input: pcfg-input {
+ input-enable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <0 RK_PB0 1 &pcfg_pull_none_smt>,
+ <0 RK_PB1 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <0 RK_PC2 1 &pcfg_pull_none_smt>,
+ <0 RK_PC3 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 RK_PB7 2 &pcfg_pull_none_smt>,
+ <2 RK_PC0 2 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <1 RK_PB4 4 &pcfg_pull_none_smt>,
+ <1 RK_PB5 4 &pcfg_pull_none_smt>;
+ };
+ };
+
+ tsadc {
+ tsadc_otp_gpio: tsadc-otp-gpio {
+ rockchip,pins =
+ <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ tsadc_otp_out: tsadc-otp-out {
+ rockchip,pins =
+ <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <0 RK_PB2 1 &pcfg_pull_up>,
+ <0 RK_PB3 1 &pcfg_pull_up>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <0 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <0 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <1 RK_PC1 1 &pcfg_pull_up>,
+ <1 RK_PC0 1 &pcfg_pull_up>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins =
+ <1 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins =
+ <1 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts_gpio: uart1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart2-m0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins =
+ <1 RK_PD2 2 &pcfg_pull_up>,
+ <1 RK_PD3 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart2-m1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins =
+ <2 RK_PB4 2 &pcfg_pull_up>,
+ <2 RK_PB6 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart3-m0 {
+ uart3m0_xfer: uart3m0-xfer {
+ rockchip,pins =
+ <0 RK_PC0 2 &pcfg_pull_up>,
+ <0 RK_PC1 2 &pcfg_pull_up>;
+ };
+
+ uart3m0_cts: uart3m0-cts {
+ rockchip,pins =
+ <0 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts: uart3m0-rts {
+ rockchip,pins =
+ <0 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts_gpio: uart3m0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart3-m1 {
+ uart3m1_xfer: uart3m1-xfer {
+ rockchip,pins =
+ <1 RK_PB6 2 &pcfg_pull_up>,
+ <1 RK_PB7 2 &pcfg_pull_up>;
+ };
+
+ uart3m1_cts: uart3m1-cts {
+ rockchip,pins =
+ <1 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts: uart3m1-rts {
+ rockchip,pins =
+ <1 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts_gpio: uart3m1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 RK_PD4 2 &pcfg_pull_up>,
+ <1 RK_PD5 2 &pcfg_pull_up>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins =
+ <1 RK_PD6 2 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins =
+ <1 RK_PD7 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart5 {
+ uart5_xfer: uart5-xfer {
+ rockchip,pins =
+ <3 RK_PA2 4 &pcfg_pull_up>,
+ <3 RK_PA1 4 &pcfg_pull_up>;
+ };
+
+ uart5_cts: uart5-cts {
+ rockchip,pins =
+ <3 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ uart5_rts: uart5-rts {
+ rockchip,pins =
+ <3 RK_PA5 4 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_csn: spi0-csn {
+ rockchip,pins =
+ <1 RK_PB6 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_miso: spi0-miso {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_mosi: spi0-mosi {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_clk_hs: spi0-clk-hs {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_miso_hs: spi0-miso-hs {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_mosi_hs: spi0-mosi-hs {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn0: spi1-csn0 {
+ rockchip,pins =
+ <3 RK_PB1 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn1: spi1-csn1 {
+ rockchip,pins =
+ <3 RK_PB2 2 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_miso: spi1-miso {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_mosi: spi1-mosi {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_clk_hs: spi1-clk-hs {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_miso_hs: spi1-miso-hs {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_mosi_hs: spi1-mosi-hs {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pdm {
+ pdm_clk0m0: pdm-clk0m0 {
+ rockchip,pins =
+ <3 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m1: pdm-clk0m1 {
+ rockchip,pins =
+ <2 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ pdm_clk1: pdm-clk1 {
+ rockchip,pins =
+ <3 RK_PC7 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m0: pdm-sdi0m0 {
+ rockchip,pins =
+ <3 RK_PD3 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m1: pdm-sdi0m1 {
+ rockchip,pins =
+ <2 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi1: pdm-sdi1 {
+ rockchip,pins =
+ <3 RK_PD0 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi2: pdm-sdi2 {
+ rockchip,pins =
+ <3 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi3: pdm-sdi3 {
+ rockchip,pins =
+ <3 RK_PD2 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+ rockchip,pins =
+ <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk1_sleep: pdm-clk1-sleep {
+ rockchip,pins =
+ <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+ rockchip,pins =
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi1_sleep: pdm-sdi1-sleep {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi2_sleep: pdm-sdi2-sleep {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi3_sleep: pdm-sdi3-sleep {
+ rockchip,pins =
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ i2s0 {
+ i2s0_8ch_mclk: i2s0-8ch-mclk {
+ rockchip,pins =
+ <3 RK_PC1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+ rockchip,pins =
+ <3 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+ rockchip,pins =
+ <3 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+ rockchip,pins =
+ <3 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+ rockchip,pins =
+ <3 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+ rockchip,pins =
+ <3 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+ rockchip,pins =
+ <3 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+ rockchip,pins =
+ <3 RK_PB7 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+ rockchip,pins =
+ <3 RK_PB6 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+ rockchip,pins =
+ <3 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+ rockchip,pins =
+ <3 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+ rockchip,pins =
+ <3 RK_PB1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+ rockchip,pins =
+ <3 RK_PB0 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_mclk: i2s1-2ch-mclk {
+ rockchip,pins =
+ <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sclk: i2s1-2ch-sclk {
+ rockchip,pins =
+ <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_lrck: i2s1-2ch-lrck {
+ rockchip,pins =
+ <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdi: i2s1-2ch-sdi {
+ rockchip,pins =
+ <2 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdo: i2s1-2ch-sdo {
+ rockchip,pins =
+ <2 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s2 {
+ i2s2_2ch_mclk: i2s2-2ch-mclk {
+ rockchip,pins =
+ <3 RK_PA1 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sclk: i2s2-2ch-sclk {
+ rockchip,pins =
+ <3 RK_PA2 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_lrck: i2s2-2ch-lrck {
+ rockchip,pins =
+ <3 RK_PA3 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdi: i2s2-2ch-sdi {
+ rockchip,pins =
+ <3 RK_PA5 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdo: i2s2-2ch-sdo {
+ rockchip,pins =
+ <3 RK_PA7 2 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <1 RK_PD6 1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <1 RK_PD7 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_det: sdmmc-det {
+ rockchip,pins =
+ <0 RK_PA3 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD3 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD4 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD5 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_gpio: sdmmc-gpio {
+ rockchip,pins =
+ <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins =
+ <1 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins =
+ <1 RK_PC4 1 &pcfg_pull_up>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins =
+ <1 RK_PC6 1 &pcfg_pull_up>,
+ <1 RK_PC7 1 &pcfg_pull_up>,
+ <1 RK_PD0 1 &pcfg_pull_up>,
+ <1 RK_PD1 1 &pcfg_pull_up>;
+ };
+
+ sdio_gpio: sdio-gpio {
+ rockchip,pins =
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins =
+ <1 RK_PB1 2 &pcfg_pull_none_8ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins =
+ <1 RK_PB2 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_pwren: emmc-pwren {
+ rockchip,pins =
+ <1 RK_PB0 2 &pcfg_pull_none>;
+ };
+
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins =
+ <1 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA4 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA5 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA6 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA7 2 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ flash {
+ flash_cs0: flash-cs0 {
+ rockchip,pins =
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ flash_rdy: flash-rdy {
+ rockchip,pins =
+ <1 RK_PB1 1 &pcfg_pull_none>;
+ };
+
+ flash_dqs: flash-dqs {
+ rockchip,pins =
+ <1 RK_PB2 1 &pcfg_pull_none>;
+ };
+
+ flash_ale: flash-ale {
+ rockchip,pins =
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ flash_cle: flash-cle {
+ rockchip,pins =
+ <1 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ flash_wrn: flash-wrn {
+ rockchip,pins =
+ <1 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ flash_csl: flash-csl {
+ rockchip,pins =
+ <1 RK_PB6 1 &pcfg_pull_none>;
+ };
+
+ flash_rdn: flash-rdn {
+ rockchip,pins =
+ <1 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ flash_bus8: flash-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA1 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA2 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA3 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA4 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA5 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA6 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA7 1 &pcfg_pull_up_12ma>;
+ };
+ };
+
+ lcdc {
+ lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+ rockchip,pins =
+ <3 RK_PA0 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+ rockchip,pins =
+ <3 RK_PA1 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+ rockchip,pins =
+ <3 RK_PA2 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+ rockchip,pins =
+ <3 RK_PA3 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+
+ lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <0 RK_PB7 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <0 RK_PC0 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins =
+ <0 RK_PC1 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm4 {
+ pwm4_pin: pwm4-pin {
+ rockchip,pins =
+ <3 RK_PC2 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm5 {
+ pwm5_pin: pwm5-pin {
+ rockchip,pins =
+ <3 RK_PC3 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm6 {
+ pwm6_pin: pwm6-pin {
+ rockchip,pins =
+ <3 RK_PC4 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm7 {
+ pwm7_pin: pwm7-pin {
+ rockchip,pins =
+ <3 RK_PC5 3 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rmii_pins: rmii-pins {
+ rockchip,pins =
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+ <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+ <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+ <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+ <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+ <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+ <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+ <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+ };
+
+ mac_refclk_12ma: mac-refclk-12ma {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none_12ma>;
+ };
+
+ mac_refclk: mac-refclk {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none>;
+ };
+ };
+
+ cif-m0 {
+ cif_clkout_m0: cif-clkout-m0 {
+ rockchip,pins =
+ <2 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m0: dvp-d2d9-m0 {
+ rockchip,pins =
+ <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+ <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+ <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+ <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+ <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+ <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+ <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+ <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+ <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+ <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+ <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+ <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m0: dvp-d0d1-m0 {
+ rockchip,pins =
+ <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+ <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m0:d10-d11-m0 {
+ rockchip,pins =
+ <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+ <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ cif-m1 {
+ cif_clkout_m1: cif-clkout-m1 {
+ rockchip,pins =
+ <3 RK_PD0 3 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m1: dvp-d2d9-m1 {
+ rockchip,pins =
+ <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+ <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+ <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+ <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+ <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+ <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+ <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+ <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+ <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+ <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+ <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+ <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m1: dvp-d0d1-m1 {
+ rockchip,pins =
+ <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+ <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m1:d10-d11-m1 {
+ rockchip,pins =
+ <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+ <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ isp {
+ isp_prelight: isp-prelight {
+ rockchip,pins =
+ <3 RK_PD1 4 &pcfg_pull_none>;
+ };
+ };
+ };
+};
vin-supply = <&vcc_io>;
};
+ vcc_sdio: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ regulator-name = "vcc_sdio";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
};
};
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_sdio>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3328";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
};
&cpu0 {
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
usb2 {
usb20_host_drv: usb20-host-drv {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+ #sound-dai-cells = <0>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
status = "disabled";
};
+ grf_gpio: grf-gpio {
+ compatible = "rockchip,rk3328-grf-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power: power-controller {
compatible = "rockchip,rk3328-power-controller";
#power-domain-cells = <1>;
mode-bootloader = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
};
-
};
uart0: serial@ff110000 {
status = "disabled";
};
+ vop: vop@ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
status = "disabled";
};
+ hdmi: hdmi@ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
+ hdmiphy: phy@ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller@ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
*/
/dts-v1/;
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rock960.dtsi"
/ {
model = "96boards RK3399 Ficus";
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
-
- vcc1v8_s0: vcc1v8-s0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_drv>;
- regulator-boot-on;
- regulator-name = "vcc3v3_pcie";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
};
&gmac {
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- status = "okay";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v0_sd: LDO_REG5 {
- regulator-name = "vcc3v0_sd";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
&pcie0 {
ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
};
&pinctrl {
};
};
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
- };
-
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
usb2 {
host_vbus_drv: host-vbus-drv {
rockchip,pins =
};
};
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- clock-frequency = <100000000>;
- clock-freq-min-max = <100000 100000000>;
- disable-wp;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- card-detect-delay = <800>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
&usbdrd_dwc3_0 {
- status = "okay";
dr_mode = "host";
};
-&usbdrd3_1 {
- status = "okay";
-};
-
&usbdrd_dwc3_1 {
- status = "okay";
dr_mode = "host";
};
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
+&vcc3v3_pcie {
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
};
-&vopl_mmu {
- status = "okay";
+&vcc5v0_host {
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
};
};
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
work_led_gpio: work_led-gpio {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
status = "okay";
};
+&sdio0 {
+ /* WiFi & BT combo module Ampak AP6356S */
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+
+ /* Power supply */
+ vqmmc-supply = &vcc1v8_s3; /* IO line */
+ vmmc-supply = &vcc_sdio; /* card's power */
+
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ brcm,drive-strength = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
status = "okay";
clock-frequency = <400000>;
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&sgtl5000_clk>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3399-PC Board";
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_vbus_typec0: vcc-vbus-typec0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_vbus_typec0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+ vcc12v_sys: mp8859-dcdc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc_vbus_typec0>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_vbus_typec1: vcc-vbus-typec1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_vbus_typec1_en>;
+ regulator-name = "vcc_vbus_typec1";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG1 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcc1v8_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb1: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb1_int>;
+ vbus-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ audio-supply = <&vcca1v8_codec>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hub_rst: hub-rst {
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ usb-typec {
+ vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ fusb1_int: fusb1-int {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+ model = "96boards Rock960";
+ compatible = "vamrs,rock960", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+ pcie {
+ pcie_drv: pcie-drv {
+ rockchip,pins =
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+ gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ vcc1v8_s0: vcc1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_drv>;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ status = "okay";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcca1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v0_sd: LDO_REG5 {
+ regulator-name = "vcc3v0_sd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+ sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+ gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <100000 100000000>;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_sd>;
+ card-detect-delay = <800>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 RockPro64";
+ compatible = "pine64,rockpro64", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <0>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
vin-supply = <&vcc_1v8>;
};
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
vin-supply = <&vcc_sys>;
};
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+ pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- pmic_dvs2: pmic-dvs2 {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
};
&sdmmc {
+ broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
status = "okay";
u2phy0_otg: otg-port {
+ phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l1: cpu@1 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l2: cpu@2 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l3: cpu@3 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b0: cpu@100 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b1: cpu@101 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
};
};
resets = <&cru SRST_P_MIPI_DSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
+ phy-names = "usb";
+ phys = <&usb_phy2>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ };
};
soc-glue@5f900000 {
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
&nand {
status = "okay";
};
+
+&usb {
+ status = "okay";
+};
drive-strength = <9>;
};
};
+
+&usb {
+ status = "okay";
+};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi2: spi@54006200 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006200 0x100>;
+ interrupts = <0 229 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi3: spi@54006300 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006300 0x100>;
+ interrupts = <0 230 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ usb: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+ <&pinctrl_usb2>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb_rst 15>;
+ phys = <&usb_hsphy0>, <&usb_hsphy1>,
+ <&usb_hsphy2>, <&usb_hsphy3>,
+ <&usb_ssphy0>, <&usb_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus2: regulator@120 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x120 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus3: regulator@130 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x130 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy2: hs-phy@220 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x220 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus2>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb_hsphy3: hs-phy@230 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x230 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus3>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb_vbus0>;
+ };
+
+ usb_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 19>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 19>;
+ vbus-supply = <&usb_vbus1>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
ð0 {
status = "okay";
phy-handle = <ðphy0>;
&nand {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+ <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 21>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "syna,as370";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ l2: cache {
+ compatible = "cache";
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc@f7000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xf7000000 0x1000000>;
+
+ gic: interrupt-controller@901000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x901000 0x1000>,
+ <0x902000 0x2000>,
+ <0x904000 0x2000>,
+ <0x906000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe80000 0x10000>;
+
+ uart0: serial@c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xc00 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@1800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@2000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x2000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
&cbass_main {
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x01800000 0x10000>, /* GICD */
- <0x01880000 0x90000>; /* GICR */
+ reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+ <0x00 0x01880000 0x00 0x90000>; /* GICR */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
gic_its: gic-its@18200000 {
compatible = "arm,gic-v3-its";
- reg = <0x01820000 0x10000>;
+ reg = <0x00 0x01820000 0x00 0x10000>;
msi-controller;
#msi-cells = <1>;
};
};
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu {
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ };
+
chosen { };
firmware {
cbass_main: interconnect@100000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
- <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
- <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
- <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
- <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
/* MCUSS Range */
- <0x28380000 0x00 0x28380000 0x03880000>,
- <0x40200000 0x00 0x40200000 0x00900100>,
- <0x42040000 0x00 0x42040000 0x03ac2400>,
- <0x45100000 0x00 0x45100000 0x00c24000>,
- <0x46000000 0x00 0x46000000 0x00200000>,
- <0x47000000 0x00 0x47000000 0x00068400>;
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
cbass_mcu: interconnect@28380000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
- <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
- <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
- <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
- <0x46000000 0x46000000 0x00200000>, /* CPSW */
- <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
cbass_wakeup: interconnect@42040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* WKUP Basic peripherals */
- ranges = <0x42040000 0x42040000 0x03ac2400>;
+ ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
};
};
};
/* Now include the peripherals for each bus segments */
#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
};
};
};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_K3=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_LG1K=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
+CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_SOC_TI=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
put_unaligned_be32(2, iv + GCM_IV_SIZE);
- while (walk.nbytes >= AES_BLOCK_SIZE) {
+ while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
int blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *dst = walk.dst.virt.addr;
u8 *src = walk.src.virt.addr;
NULL);
err = skcipher_walk_done(&walk,
- walk.nbytes % AES_BLOCK_SIZE);
+ walk.nbytes % (2 * AES_BLOCK_SIZE));
}
- if (walk.nbytes)
+ if (walk.nbytes) {
__aes_arm64_encrypt(ctx->aes_key.key_enc, ks, iv,
nrounds);
+ if (walk.nbytes > AES_BLOCK_SIZE) {
+ crypto_inc(iv, AES_BLOCK_SIZE);
+ __aes_arm64_encrypt(ctx->aes_key.key_enc,
+ ks + AES_BLOCK_SIZE, iv,
+ nrounds);
+ }
+ }
}
/* handle the tail */
__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
put_unaligned_be32(2, iv + GCM_IV_SIZE);
- while (walk.nbytes >= AES_BLOCK_SIZE) {
+ while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
int blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *dst = walk.dst.virt.addr;
u8 *src = walk.src.virt.addr;
} while (--blocks > 0);
err = skcipher_walk_done(&walk,
- walk.nbytes % AES_BLOCK_SIZE);
+ walk.nbytes % (2 * AES_BLOCK_SIZE));
}
- if (walk.nbytes)
+ if (walk.nbytes) {
+ if (walk.nbytes > AES_BLOCK_SIZE) {
+ u8 *iv2 = iv + AES_BLOCK_SIZE;
+
+ memcpy(iv2, iv, AES_BLOCK_SIZE);
+ crypto_inc(iv2, AES_BLOCK_SIZE);
+
+ __aes_arm64_encrypt(ctx->aes_key.key_enc, iv2,
+ iv2, nrounds);
+ }
__aes_arm64_encrypt(ctx->aes_key.key_enc, iv, iv,
nrounds);
+ }
}
/* handle the tail */
crypto_unregister_alg(&sm4_ce_alg);
}
-module_cpu_feature_match(SM3, sm4_ce_mod_init);
+module_cpu_feature_match(SM4, sm4_ce_mod_init);
module_exit(sm4_ce_mod_fini);
if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
return 0;
- while (!req.complete)
- pmu_poll();
+ pmu_wait_complete(&req);
- time = (u32)((req.reply[1] << 24) | (req.reply[2] << 16) |
- (req.reply[3] << 8) | req.reply[4]);
+ time = (u32)((req.reply[0] << 24) | (req.reply[1] << 16) |
+ (req.reply[2] << 8) | req.reply[3]);
return time - RTC_OFFSET;
}
(data >> 24) & 0xFF, (data >> 16) & 0xFF,
(data >> 8) & 0xFF, data & 0xFF) < 0)
return;
- while (!req.complete)
- pmu_poll();
+ pmu_wait_complete(&req);
}
static __u8 pmu_read_pram(int offset)
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-config DEBUG_STACK_USAGE
- bool "Enable stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
config EARLY_PRINTK
bool "Activate early kernel debugging"
default y
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
- select HAVE_ARCH_PREL32_RELOCATIONS
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_CBPF_JIT if !PPC64
#ifndef _ASM_RISCV_TLB_H
#define _ASM_RISCV_TLB_H
+struct mmu_gather;
+
+static void tlb_flush(struct mmu_gather *tlb);
+
#include <asm-generic/tlb.h>
static inline void tlb_flush(struct mmu_gather *tlb)
SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
uintptr_t, flags)
{
-#ifdef CONFIG_SMP
- struct mm_struct *mm = current->mm;
- bool local = (flags & SYS_RISCV_FLUSH_ICACHE_LOCAL) != 0;
-#endif
-
/* Check the reserved flags. */
if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
return -EINVAL;
- /*
- * Without CONFIG_SMP flush_icache_mm is a just a flush_icache_all(),
- * which generates unused variable warnings all over this function.
- */
-#ifdef CONFIG_SMP
- flush_icache_mm(mm, local);
-#else
- flush_icache_all();
-#endif
+ flush_icache_mm(current->mm, flags & SYS_RISCV_FLUSH_ICACHE_LOCAL);
return 0;
}
This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
framebuffers so the new generic system-framebuffer drivers can be
used on x86. If the framebuffer is not compatible with the generic
- modes, it is adverticed as fallback platform framebuffer so legacy
+ modes, it is advertised as fallback platform framebuffer so legacy
drivers like efifb, vesafb and uvesafb can pick it up.
If this option is not selected, all system framebuffers are always
marked as fallback platform framebuffers as usual.
endif
endif
-ifndef CC_HAVE_ASM_GOTO
- $(error Compiler lacks asm-goto support.)
-endif
-
-#
-# Jump labels need '-maccumulate-outgoing-args' for gcc < 4.5.2 to prevent a
-# GCC bug (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226). There's no way
-# to test for this bug at compile-time because the test case needs to execute,
-# which is a no-go for cross compilers. So check the GCC version instead.
-#
-ifdef CONFIG_JUMP_LABEL
- ifneq ($(ACCUMULATE_OUTGOING_ARGS), 1)
- ACCUMULATE_OUTGOING_ARGS = $(call cc-if-fullversion, -lt, 040502, 1)
- endif
-endif
-
ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
# This compiler flag is not supported by Clang:
KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
+archprepare: checkbin
+checkbin:
+ifndef CC_HAVE_ASM_GOTO
+ @echo Compiler lacks asm-goto support.
+ @exit 1
+endif
+
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
pcmpeqd TWOONE(%rip), \TMP2
pand POLY(%rip), \TMP2
pxor \TMP2, \TMP3
- movdqa \TMP3, HashKey(%arg2)
+ movdqu \TMP3, HashKey(%arg2)
movdqa \TMP3, \TMP5
pshufd $78, \TMP3, \TMP1
pxor \TMP3, \TMP1
- movdqa \TMP1, HashKey_k(%arg2)
+ movdqu \TMP1, HashKey_k(%arg2)
GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7
# TMP5 = HashKey^2<<1 (mod poly)
- movdqa \TMP5, HashKey_2(%arg2)
+ movdqu \TMP5, HashKey_2(%arg2)
# HashKey_2 = HashKey^2<<1 (mod poly)
pshufd $78, \TMP5, \TMP1
pxor \TMP5, \TMP1
- movdqa \TMP1, HashKey_2_k(%arg2)
+ movdqu \TMP1, HashKey_2_k(%arg2)
GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7
# TMP5 = HashKey^3<<1 (mod poly)
- movdqa \TMP5, HashKey_3(%arg2)
+ movdqu \TMP5, HashKey_3(%arg2)
pshufd $78, \TMP5, \TMP1
pxor \TMP5, \TMP1
- movdqa \TMP1, HashKey_3_k(%arg2)
+ movdqu \TMP1, HashKey_3_k(%arg2)
GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7
# TMP5 = HashKey^3<<1 (mod poly)
- movdqa \TMP5, HashKey_4(%arg2)
+ movdqu \TMP5, HashKey_4(%arg2)
pshufd $78, \TMP5, \TMP1
pxor \TMP5, \TMP1
- movdqa \TMP1, HashKey_4_k(%arg2)
+ movdqu \TMP1, HashKey_4_k(%arg2)
.endm
# GCM_INIT initializes a gcm_context struct to prepare for encoding/decoding.
movdqu %xmm0, CurCount(%arg2) # ctx_data.current_counter = iv
PRECOMPUTE \SUBKEY, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
- movdqa HashKey(%arg2), %xmm13
+ movdqu HashKey(%arg2), %xmm13
CALC_AAD_HASH %xmm13, \AAD, \AADLEN, %xmm0, %xmm1, %xmm2, %xmm3, \
%xmm4, %xmm5, %xmm6
pshufd $78, \XMM5, \TMP6
pxor \XMM5, \TMP6
paddd ONE(%rip), \XMM0 # INCR CNT
- movdqa HashKey_4(%arg2), \TMP5
+ movdqu HashKey_4(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP4 # TMP4 = a1*b1
movdqa \XMM0, \XMM1
paddd ONE(%rip), \XMM0 # INCR CNT
pxor (%arg1), \XMM2
pxor (%arg1), \XMM3
pxor (%arg1), \XMM4
- movdqa HashKey_4_k(%arg2), \TMP5
+ movdqu HashKey_4_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP6 # TMP6 = (a1+a0)*(b1+b0)
movaps 0x10(%arg1), \TMP1
AESENC \TMP1, \XMM1 # Round 1
movdqa \XMM6, \TMP1
pshufd $78, \XMM6, \TMP2
pxor \XMM6, \TMP2
- movdqa HashKey_3(%arg2), \TMP5
+ movdqu HashKey_3(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1 * b1
movaps 0x30(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 3
AESENC \TMP3, \XMM2
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
- movdqa HashKey_3_k(%arg2), \TMP5
+ movdqu HashKey_3_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movaps 0x50(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 5
movdqa \XMM7, \TMP1
pshufd $78, \XMM7, \TMP2
pxor \XMM7, \TMP2
- movdqa HashKey_2(%arg2), \TMP5
+ movdqu HashKey_2(%arg2), \TMP5
# Multiply TMP5 * HashKey using karatsuba
AESENC \TMP3, \XMM2
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
- movdqa HashKey_2_k(%arg2), \TMP5
+ movdqu HashKey_2_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movaps 0x80(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 8
movdqa \XMM8, \TMP1
pshufd $78, \XMM8, \TMP2
pxor \XMM8, \TMP2
- movdqa HashKey(%arg2), \TMP5
+ movdqu HashKey(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1*b1
movaps 0x90(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 9
AESENCLAST \TMP3, \XMM2
AESENCLAST \TMP3, \XMM3
AESENCLAST \TMP3, \XMM4
- movdqa HashKey_k(%arg2), \TMP5
+ movdqu HashKey_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movdqu (%arg4,%r11,1), \TMP3
pxor \TMP3, \XMM1 # Ciphertext/Plaintext XOR EK
pshufd $78, \XMM5, \TMP6
pxor \XMM5, \TMP6
paddd ONE(%rip), \XMM0 # INCR CNT
- movdqa HashKey_4(%arg2), \TMP5
+ movdqu HashKey_4(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP4 # TMP4 = a1*b1
movdqa \XMM0, \XMM1
paddd ONE(%rip), \XMM0 # INCR CNT
pxor (%arg1), \XMM2
pxor (%arg1), \XMM3
pxor (%arg1), \XMM4
- movdqa HashKey_4_k(%arg2), \TMP5
+ movdqu HashKey_4_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP6 # TMP6 = (a1+a0)*(b1+b0)
movaps 0x10(%arg1), \TMP1
AESENC \TMP1, \XMM1 # Round 1
movdqa \XMM6, \TMP1
pshufd $78, \XMM6, \TMP2
pxor \XMM6, \TMP2
- movdqa HashKey_3(%arg2), \TMP5
+ movdqu HashKey_3(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1 * b1
movaps 0x30(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 3
AESENC \TMP3, \XMM2
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
- movdqa HashKey_3_k(%arg2), \TMP5
+ movdqu HashKey_3_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movaps 0x50(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 5
movdqa \XMM7, \TMP1
pshufd $78, \XMM7, \TMP2
pxor \XMM7, \TMP2
- movdqa HashKey_2(%arg2), \TMP5
+ movdqu HashKey_2(%arg2), \TMP5
# Multiply TMP5 * HashKey using karatsuba
AESENC \TMP3, \XMM2
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
- movdqa HashKey_2_k(%arg2), \TMP5
+ movdqu HashKey_2_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movaps 0x80(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 8
movdqa \XMM8, \TMP1
pshufd $78, \XMM8, \TMP2
pxor \XMM8, \TMP2
- movdqa HashKey(%arg2), \TMP5
+ movdqu HashKey(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1*b1
movaps 0x90(%arg1), \TMP3
AESENC \TMP3, \XMM1 # Round 9
AESENCLAST \TMP3, \XMM2
AESENCLAST \TMP3, \XMM3
AESENCLAST \TMP3, \XMM4
- movdqa HashKey_k(%arg2), \TMP5
+ movdqu HashKey_k(%arg2), \TMP5
PCLMULQDQ 0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movdqu (%arg4,%r11,1), \TMP3
pxor \TMP3, \XMM1 # Ciphertext/Plaintext XOR EK
movdqa \XMM1, \TMP6
pshufd $78, \XMM1, \TMP2
pxor \XMM1, \TMP2
- movdqa HashKey_4(%arg2), \TMP5
+ movdqu HashKey_4(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP6 # TMP6 = a1*b1
PCLMULQDQ 0x00, \TMP5, \XMM1 # XMM1 = a0*b0
- movdqa HashKey_4_k(%arg2), \TMP4
+ movdqu HashKey_4_k(%arg2), \TMP4
PCLMULQDQ 0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
movdqa \XMM1, \XMMDst
movdqa \TMP2, \XMM1 # result in TMP6, XMMDst, XMM1
movdqa \XMM2, \TMP1
pshufd $78, \XMM2, \TMP2
pxor \XMM2, \TMP2
- movdqa HashKey_3(%arg2), \TMP5
+ movdqu HashKey_3(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1*b1
PCLMULQDQ 0x00, \TMP5, \XMM2 # XMM2 = a0*b0
- movdqa HashKey_3_k(%arg2), \TMP4
+ movdqu HashKey_3_k(%arg2), \TMP4
PCLMULQDQ 0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
pxor \TMP1, \TMP6
pxor \XMM2, \XMMDst
movdqa \XMM3, \TMP1
pshufd $78, \XMM3, \TMP2
pxor \XMM3, \TMP2
- movdqa HashKey_2(%arg2), \TMP5
+ movdqu HashKey_2(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1*b1
PCLMULQDQ 0x00, \TMP5, \XMM3 # XMM3 = a0*b0
- movdqa HashKey_2_k(%arg2), \TMP4
+ movdqu HashKey_2_k(%arg2), \TMP4
PCLMULQDQ 0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
pxor \TMP1, \TMP6
pxor \XMM3, \XMMDst
movdqa \XMM4, \TMP1
pshufd $78, \XMM4, \TMP2
pxor \XMM4, \TMP2
- movdqa HashKey(%arg2), \TMP5
+ movdqu HashKey(%arg2), \TMP5
PCLMULQDQ 0x11, \TMP5, \TMP1 # TMP1 = a1*b1
PCLMULQDQ 0x00, \TMP5, \XMM4 # XMM4 = a0*b0
- movdqa HashKey_k(%arg2), \TMP4
+ movdqu HashKey_k(%arg2), \TMP4
PCLMULQDQ 0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
pxor \TMP1, \TMP6
pxor \XMM4, \XMMDst
perf_callchain_store(entry, regs->ip);
- if (!current->mm)
+ if (!nmi_uaccess_okay())
return;
if (perf_callchain_user32(regs, entry))
return flags;
}
-static inline void native_restore_fl(unsigned long flags)
+extern inline void native_restore_fl(unsigned long flags);
+extern inline void native_restore_fl(unsigned long flags)
{
asm volatile("push %0 ; popf"
: /* no output */
#ifndef _ASM_X86_PGTABLE_3LEVEL_H
#define _ASM_X86_PGTABLE_3LEVEL_H
+#include <asm/atomic64_32.h>
+
/*
* Intel Physical Address Extension (PAE) Mode - three-level page
* tables on PPro+ CPUs.
{
pte_t res;
- /* xchg acts as a barrier before the setting of the high bits */
- res.pte_low = xchg(&ptep->pte_low, 0);
- res.pte_high = ptep->pte_high;
- ptep->pte_high = 0;
+ res.pte = (pteval_t)arch_atomic64_xchg((atomic64_t *)ptep, 0);
return res;
}
/* Index into per_cpu list: */
u16 cpu_index;
u32 microcode;
+ /* Address space bits used by the cache internally */
+ u8 x86_cache_bits;
unsigned initialized : 1;
} __randomize_layout;
static inline unsigned long long l1tf_pfn_limit(void)
{
- return BIT_ULL(boot_cpu_data.x86_phys_bits - 1 - PAGE_SHIFT);
+ return BIT_ULL(boot_cpu_data.x86_cache_bits - 1 - PAGE_SHIFT);
}
extern void early_cpu_init(void);
#define __ARCH_HAS_SA_RESTORER
+#include <asm/asm.h>
#include <uapi/asm/sigcontext.h>
#ifdef __i386__
static inline int __gen_sigismember(sigset_t *set, int _sig)
{
- unsigned char ret;
- asm("btl %2,%1\n\tsetc %0"
- : "=qm"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+ bool ret;
+ asm("btl %2,%1" CC_SET(c)
+ : CC_OUT(c) (ret) : "m"(*set), "Ir"(_sig-1));
return ret;
}
return (unsigned long)frame;
}
-void show_opcodes(u8 *rip, const char *loglvl);
+void show_opcodes(struct pt_regs *regs, const char *loglvl);
void show_ip(struct pt_regs *regs, const char *loglvl);
#endif /* _ASM_X86_STACKTRACE_H */
* are on. This means that it may not match current->active_mm,
* which will contain the previous user mm when we're in lazy TLB
* mode even if we've already switched back to swapper_pg_dir.
+ *
+ * During switch_mm_irqs_off(), loaded_mm will be set to
+ * LOADED_MM_SWITCHING during the brief interrupts-off window
+ * when CR3 and loaded_mm would otherwise be inconsistent. This
+ * is for nmi_uaccess_okay()'s benefit.
*/
struct mm_struct *loaded_mm;
+
+#define LOADED_MM_SWITCHING ((struct mm_struct *)1)
+
u16 loaded_mm_asid;
u16 next_asid;
/* last user mm's ctx id */
};
DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
+/*
+ * Blindly accessing user memory from NMI context can be dangerous
+ * if we're in the middle of switching the current user task or
+ * switching the loaded mm. It can also be dangerous if we
+ * interrupted some kernel code that was temporarily using a
+ * different mm.
+ */
+static inline bool nmi_uaccess_okay(void)
+{
+ struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+ struct mm_struct *current_mm = current->mm;
+
+ VM_WARN_ON_ONCE(!loaded_mm);
+
+ /*
+ * The condition we want to check is
+ * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though,
+ * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
+ * is supposed to be reasonably fast.
+ *
+ * Instead, we check the almost equivalent but somewhat conservative
+ * condition below, and we rely on the fact that switch_mm_irqs_off()
+ * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
+ */
+ if (loaded_mm != current_mm)
+ return false;
+
+ VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
+
+ return true;
+}
+
/* Initialize cr4 shadow for this CPU. */
static inline void cr4_init_shadow(void)
{
*
* If RDPID is available, use it.
*/
- alternative_io ("lsl %[p],%[seg]",
+ alternative_io ("lsl %[seg],%[p]",
".byte 0xf3,0x0f,0xc7,0xf8", /* RDPID %eax/rax */
X86_FEATURE_RDPID,
[p] "=a" (p), [seg] "r" (__PER_CPU_SEG));
* It means the size must be writable atomically and the address must be aligned
* in a way that permits an atomic write. It also makes sure we fit on a single
* page.
- *
- * Note: Must be called under text_mutex.
*/
void *text_poke(void *addr, const void *opcode, size_t len)
{
*/
BUG_ON(!after_bootmem);
+ lockdep_assert_held(&text_mutex);
+
if (!core_kernel_text((unsigned long)addr)) {
pages[0] = vmalloc_to_page(addr);
pages[1] = vmalloc_to_page(addr + PAGE_SIZE);
* - replace the first byte (int3) by the first byte of
* replacing opcode
* - sync cores
- *
- * Note: must be called under text_mutex.
*/
void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler)
{
bp_int3_handler = handler;
bp_int3_addr = (u8 *)addr + sizeof(int3);
bp_patching_in_progress = true;
+
+ lockdep_assert_held(&text_mutex);
+
/*
* Corresponding read barrier in int3 notifier for making sure the
* in_progress and handler are correctly ordered wrt. patching.
enum vmx_l1d_flush_state l1tf_vmx_mitigation = VMENTER_L1D_FLUSH_AUTO;
EXPORT_SYMBOL_GPL(l1tf_vmx_mitigation);
+/*
+ * These CPUs all support 44bits physical address space internally in the
+ * cache but CPUID can report a smaller number of physical address bits.
+ *
+ * The L1TF mitigation uses the top most address bit for the inversion of
+ * non present PTEs. When the installed memory reaches into the top most
+ * address bit due to memory holes, which has been observed on machines
+ * which report 36bits physical address bits and have 32G RAM installed,
+ * then the mitigation range check in l1tf_select_mitigation() triggers.
+ * This is a false positive because the mitigation is still possible due to
+ * the fact that the cache uses 44bit internally. Use the cache bits
+ * instead of the reported physical bits and adjust them on the affected
+ * machines to 44bit if the reported bits are less than 44.
+ */
+static void override_cache_bits(struct cpuinfo_x86 *c)
+{
+ if (c->x86 != 6)
+ return;
+
+ switch (c->x86_model) {
+ case INTEL_FAM6_NEHALEM:
+ case INTEL_FAM6_WESTMERE:
+ case INTEL_FAM6_SANDYBRIDGE:
+ case INTEL_FAM6_IVYBRIDGE:
+ case INTEL_FAM6_HASWELL_CORE:
+ case INTEL_FAM6_HASWELL_ULT:
+ case INTEL_FAM6_HASWELL_GT3E:
+ case INTEL_FAM6_BROADWELL_CORE:
+ case INTEL_FAM6_BROADWELL_GT3E:
+ case INTEL_FAM6_SKYLAKE_MOBILE:
+ case INTEL_FAM6_SKYLAKE_DESKTOP:
+ case INTEL_FAM6_KABYLAKE_MOBILE:
+ case INTEL_FAM6_KABYLAKE_DESKTOP:
+ if (c->x86_cache_bits < 44)
+ c->x86_cache_bits = 44;
+ break;
+ }
+}
+
static void __init l1tf_select_mitigation(void)
{
u64 half_pa;
if (!boot_cpu_has_bug(X86_BUG_L1TF))
return;
+ override_cache_bits(&boot_cpu_data);
+
switch (l1tf_mitigation) {
case L1TF_MITIGATION_OFF:
case L1TF_MITIGATION_FLUSH_NOWARN:
return;
#endif
- /*
- * This is extremely unlikely to happen because almost all
- * systems have far more MAX_PA/2 than RAM can be fit into
- * DIMM slots.
- */
half_pa = (u64)l1tf_pfn_limit() << PAGE_SHIFT;
if (e820__mapped_any(half_pa, ULLONG_MAX - half_pa, E820_TYPE_RAM)) {
pr_warn("System has more than MAX_PA/2 memory. L1TF mitigation not effective.\n");
else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
c->x86_phys_bits = 36;
#endif
+ c->x86_cache_bits = c->x86_phys_bits;
}
static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
if (cpu_has(c, X86_FEATURE_HYPERVISOR))
return false;
+ if (c->x86 != 6)
+ return false;
+
for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) {
if (c->x86_model == spectre_bad_microcodes[i].model &&
c->x86_stepping == spectre_bad_microcodes[i].stepping)
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/sysfs.h>
+#include <linux/kasan.h>
#include <asm/cpu_entry_area.h>
#include <asm/stacktrace.h>
* Thus, the 2/3rds prologue and 64 byte OPCODE_BUFSIZE is just a random
* guesstimate in attempt to achieve all of the above.
*/
-void show_opcodes(u8 *rip, const char *loglvl)
+void show_opcodes(struct pt_regs *regs, const char *loglvl)
{
#define PROLOGUE_SIZE 42
#define EPILOGUE_SIZE 21
#define OPCODE_BUFSIZE (PROLOGUE_SIZE + 1 + EPILOGUE_SIZE)
u8 opcodes[OPCODE_BUFSIZE];
+ unsigned long prologue = regs->ip - PROLOGUE_SIZE;
+ bool bad_ip;
- if (probe_kernel_read(opcodes, rip - PROLOGUE_SIZE, OPCODE_BUFSIZE)) {
+ /*
+ * Make sure userspace isn't trying to trick us into dumping kernel
+ * memory by pointing the userspace instruction pointer at it.
+ */
+ bad_ip = user_mode(regs) &&
+ __chk_range_not_ok(prologue, OPCODE_BUFSIZE, TASK_SIZE_MAX);
+
+ if (bad_ip || probe_kernel_read(opcodes, (u8 *)prologue,
+ OPCODE_BUFSIZE)) {
printk("%sCode: Bad RIP value.\n", loglvl);
} else {
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
#else
printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip);
#endif
- show_opcodes((u8 *)regs->ip, loglvl);
+ show_opcodes(regs, loglvl);
}
void show_iret_regs(struct pt_regs *regs)
* We're not going to return, but we might be on an IST stack or
* have very little stack space left. Rewind the stack and kill
* the task.
+ * Before we rewind the stack, we have to tell KASAN that we're going to
+ * reuse the task stack and that existing poisons are invalid.
*/
+ kasan_unpoison_task_stack(current);
rewind_stack_do_exit(signr);
}
NOKPROBE_SYMBOL(oops_end);
#include <linux/uaccess.h>
#include <linux/export.h>
+#include <asm/tlbflush.h>
+
/*
* We rely on the nested NMI work to allow atomic faults from the NMI path; the
* nested NMI paths are careful to preserve CR2.
if (__range_not_ok(from, n, TASK_SIZE))
return n;
+ if (!nmi_uaccess_okay())
+ return n;
+
/*
* Even though this function is typically called from NMI/IRQ context
* disable pagefaults so that its behaviour is consistent even when
printk(KERN_CONT "\n");
- show_opcodes((u8 *)regs->ip, loglvl);
+ show_opcodes(regs, loglvl);
}
static void
return 0;
}
+/*
+ * Machine check recovery code needs to change cache mode of poisoned
+ * pages to UC to avoid speculative access logging another error. But
+ * passing the address of the 1:1 mapping to set_memory_uc() is a fine
+ * way to encourage a speculative access. So we cheat and flip the top
+ * bit of the address. This works fine for the code that updates the
+ * page tables. But at the end of the process we need to flush the cache
+ * and the non-canonical address causes a #GP fault when used by the
+ * CLFLUSH instruction.
+ *
+ * But in the common case we already have a canonical address. This code
+ * will fix the top bit if needed and is a no-op otherwise.
+ */
+static inline unsigned long make_addr_canonical_again(unsigned long addr)
+{
+#ifdef CONFIG_X86_64
+ return (long)(addr << 1) >> 1;
+#else
+ return addr;
+#endif
+}
+
+
static int change_page_attr_set_clr(unsigned long *addr, int numpages,
pgprot_t mask_set, pgprot_t mask_clr,
int force_split, int in_flag,
* Save address for cache flush. *addr is modified in the call
* to __change_page_attr_set_clr() below.
*/
- baddr = *addr;
+ baddr = make_addr_canonical_again(*addr);
}
/* Must avoid aliasing mappings in the highmem code */
*
* Returns a pointer to a PTE on success, or NULL on failure.
*/
-static __init pte_t *pti_user_pagetable_walk_pte(unsigned long address)
+static pte_t *pti_user_pagetable_walk_pte(unsigned long address)
{
gfp_t gfp = (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
pmd_t *pmd;
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
+ /* Let nmi_uaccess_okay() know that we're changing CR3. */
+ this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING);
+ barrier();
+
if (need_flush) {
this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
if (next != &init_mm)
this_cpu_write(cpu_tlbstate.last_ctx_id, next->context.ctx_id);
+ /* Make sure we write CR3 before loaded_mm. */
+ barrier();
+
this_cpu_write(cpu_tlbstate.loaded_mm, next);
this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid);
}
void __init efi_call_phys_epilog(pgd_t *save_pgd)
{
- struct desc_ptr gdt_descr;
-
- gdt_descr.address = (unsigned long)get_cpu_gdt_rw(0);
- gdt_descr.size = GDT_SIZE - 1;
- load_gdt(&gdt_descr);
-
load_cr3(save_pgd);
__flush_tlb_all();
+
+ load_fixmap_gdt(0);
}
void __init efi_runtime_update_mappings(void)
static void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
{
trace_xen_mmu_set_pte_atomic(ptep, pte);
- set_64bit((u64 *)ptep, native_pte_val(pte));
+ __xen_set_pte(ptep, pte);
}
static void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
trace_xen_mmu_pte_clear(mm, addr, ptep);
- if (!xen_batched_set_pte(ptep, native_make_pte(0)))
- native_pte_clear(mm, addr, ptep);
+ __xen_set_pte(ptep, native_make_pte(0));
}
static void xen_pmd_clear(pmd_t *pmdp)
pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
pte_val_ma(pte));
#endif
- native_set_pte(ptep, pte);
+ __xen_set_pte(ptep, pte);
}
/* Early in boot, while setting up the initial pagetable, assume
pud_t *pud;
pgd_t *pgd;
unsigned long *new_p2m;
- int save_pud;
size = PAGE_ALIGN(xen_start_info->nr_pages * sizeof(unsigned long));
n_pte = roundup(size, PAGE_SIZE) >> PAGE_SHIFT;
pgd = __va(read_cr3_pa());
new_p2m = (unsigned long *)(2 * PGDIR_SIZE);
- save_pud = n_pud;
for (idx_pud = 0; idx_pud < n_pud; idx_pud++) {
pud = early_memremap(pud_phys, PAGE_SIZE);
clear_page(pud);
}
}
-static void __wbt_done(struct rq_qos *rqos, enum wbt_flags wb_acct)
+static void wbt_rqw_done(struct rq_wb *rwb, struct rq_wait *rqw,
+ enum wbt_flags wb_acct)
{
- struct rq_wb *rwb = RQWB(rqos);
- struct rq_wait *rqw;
int inflight, limit;
- if (!(wb_acct & WBT_TRACKED))
- return;
-
- rqw = get_rq_wait(rwb, wb_acct);
inflight = atomic_dec_return(&rqw->inflight);
/*
int diff = limit - inflight;
if (!inflight || diff >= rwb->wb_background / 2)
- wake_up(&rqw->wait);
+ wake_up_all(&rqw->wait);
}
}
+static void __wbt_done(struct rq_qos *rqos, enum wbt_flags wb_acct)
+{
+ struct rq_wb *rwb = RQWB(rqos);
+ struct rq_wait *rqw;
+
+ if (!(wb_acct & WBT_TRACKED))
+ return;
+
+ rqw = get_rq_wait(rwb, wb_acct);
+ wbt_rqw_done(rwb, rqw, wb_acct);
+}
+
/*
* Called on completion of a request. Note that it's also called when
* a request is merged, when the request gets freed.
return limit;
}
+struct wbt_wait_data {
+ struct wait_queue_entry wq;
+ struct task_struct *task;
+ struct rq_wb *rwb;
+ struct rq_wait *rqw;
+ unsigned long rw;
+ bool got_token;
+};
+
+static int wbt_wake_function(struct wait_queue_entry *curr, unsigned int mode,
+ int wake_flags, void *key)
+{
+ struct wbt_wait_data *data = container_of(curr, struct wbt_wait_data,
+ wq);
+
+ /*
+ * If we fail to get a budget, return -1 to interrupt the wake up
+ * loop in __wake_up_common.
+ */
+ if (!rq_wait_inc_below(data->rqw, get_limit(data->rwb, data->rw)))
+ return -1;
+
+ data->got_token = true;
+ list_del_init(&curr->entry);
+ wake_up_process(data->task);
+ return 1;
+}
+
/*
* Block if we will exceed our limit, or if we are currently waiting for
* the timer to kick off queuing again.
__acquires(lock)
{
struct rq_wait *rqw = get_rq_wait(rwb, wb_acct);
- DECLARE_WAITQUEUE(wait, current);
+ struct wbt_wait_data data = {
+ .wq = {
+ .func = wbt_wake_function,
+ .entry = LIST_HEAD_INIT(data.wq.entry),
+ },
+ .task = current,
+ .rwb = rwb,
+ .rqw = rqw,
+ .rw = rw,
+ };
bool has_sleeper;
has_sleeper = wq_has_sleeper(&rqw->wait);
if (!has_sleeper && rq_wait_inc_below(rqw, get_limit(rwb, rw)))
return;
- add_wait_queue_exclusive(&rqw->wait, &wait);
+ prepare_to_wait_exclusive(&rqw->wait, &data.wq, TASK_UNINTERRUPTIBLE);
do {
- set_current_state(TASK_UNINTERRUPTIBLE);
+ if (data.got_token)
+ break;
- if (!has_sleeper && rq_wait_inc_below(rqw, get_limit(rwb, rw)))
+ if (!has_sleeper &&
+ rq_wait_inc_below(rqw, get_limit(rwb, rw))) {
+ finish_wait(&rqw->wait, &data.wq);
+
+ /*
+ * We raced with wbt_wake_function() getting a token,
+ * which means we now have two. Put our local token
+ * and wake anyone else potentially waiting for one.
+ */
+ if (data.got_token)
+ wbt_rqw_done(rwb, rqw, wb_acct);
break;
+ }
if (lock) {
spin_unlock_irq(lock);
spin_lock_irq(lock);
} else
io_schedule();
+
has_sleeper = false;
} while (1);
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&rqw->wait, &wait);
+ finish_wait(&rqw->wait, &data.wq);
}
static inline bool wbt_should_throttle(struct rq_wb *rwb, struct bio *bio)
return;
}
- if (current_is_kswapd())
- flags |= WBT_KSWAPD;
- if (bio_op(bio) == REQ_OP_DISCARD)
- flags |= WBT_DISCARD;
-
__wbt_wait(rwb, flags, bio->bi_opf, lock);
if (!blk_stat_is_active(rwb->cb))
struct request_queue *queue;
spinlock_t lock;
struct hlist_node dev_list;
- atomic_t ref_count;
+ refcount_t ref_count;
char name[20];
int max_queue;
};
mutex_lock(&bsg_mutex);
- if (!atomic_dec_and_test(&bd->ref_count)) {
+ if (!refcount_dec_and_test(&bd->ref_count)) {
mutex_unlock(&bsg_mutex);
return 0;
}
bd->queue = rq;
- atomic_set(&bd->ref_count, 1);
+ refcount_set(&bd->ref_count, 1);
hlist_add_head(&bd->dev_list, bsg_dev_idx_hash(iminor(inode)));
strncpy(bd->name, dev_name(rq->bsg_dev.class_dev), sizeof(bd->name) - 1);
hlist_for_each_entry(bd, bsg_dev_idx_hash(minor), dev_list) {
if (bd->queue == q) {
- atomic_inc(&bd->ref_count);
+ refcount_inc(&bd->ref_count);
goto found;
}
}
spin_lock(&elv_list_lock);
if (elevator_find(e->elevator_name, e->uses_mq)) {
spin_unlock(&elv_list_lock);
- if (e->icq_cache)
- kmem_cache_destroy(e->icq_cache);
+ kmem_cache_destroy(e->icq_cache);
return -EBUSY;
}
list_add_tail(&e->list, &elv_list);
.qc_issue = ftide010_qc_issue,
};
-static struct ata_port_info ftide010_port_info[] = {
- {
- .flags = ATA_FLAG_SLAVE_POSS,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- .pio_mask = ATA_PIO4,
- .port_ops = &pata_ftide010_port_ops,
- },
+static struct ata_port_info ftide010_port_info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &pata_ftide010_port_ops,
};
#if IS_ENABLED(CONFIG_SATA_GEMINI)
}
static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+ struct ata_port_info *pi,
bool is_ata1)
{
struct device *dev = ftide->dev;
/* Flag port as SATA-capable */
if (gemini_sata_bridge_enabled(sg, is_ata1))
- ftide010_port_info[0].flags |= ATA_FLAG_SATA;
+ pi->flags |= ATA_FLAG_SATA;
+
+ /* This device has broken DMA, only PIO works */
+ if (of_machine_is_compatible("itian,sq201")) {
+ pi->mwdma_mask = 0;
+ pi->udma_mask = 0;
+ }
/*
* We assume that a simple 40-wire cable is used in the PATA mode.
}
#else
static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+ struct ata_port_info *pi,
bool is_ata1)
{
return -ENOTSUPP;
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- const struct ata_port_info pi = ftide010_port_info[0];
+ struct ata_port_info pi = ftide010_port_info;
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ftide010 *ftide;
struct resource *res;
* are ATA0. This will also set up the cable types.
*/
ret = pata_ftide010_gemini_init(ftide,
+ &pi,
(res->start == 0x63400000));
if (ret)
goto err_dis_clk;
int of_pm_clk_add_clks(struct device *dev)
{
struct clk **clks;
- unsigned int i, count;
+ int i, count;
int ret;
if (!dev || !dev->of_node)
MODULE_PARM_DESC(max_persistent_grants,
"Maximum number of grants to map persistently");
+/*
+ * How long a persistent grant is allowed to remain allocated without being in
+ * use. The time is in seconds, 0 means indefinitely long.
+ */
+
+static unsigned int xen_blkif_pgrant_timeout = 60;
+module_param_named(persistent_grant_unused_seconds, xen_blkif_pgrant_timeout,
+ uint, 0644);
+MODULE_PARM_DESC(persistent_grant_unused_seconds,
+ "Time in seconds an unused persistent grant is allowed to "
+ "remain allocated. Default is 60, 0 means unlimited.");
+
/*
* Maximum number of rings/queues blkback supports, allow as many queues as there
* are CPUs if user has not specified a value.
/* Number of free pages to remove on each call to gnttab_free_pages */
#define NUM_BATCH_FREE_PAGES 10
+static inline bool persistent_gnt_timeout(struct persistent_gnt *persistent_gnt)
+{
+ return xen_blkif_pgrant_timeout &&
+ (jiffies - persistent_gnt->last_used >=
+ HZ * xen_blkif_pgrant_timeout);
+}
+
static inline int get_free_page(struct xen_blkif_ring *ring, struct page **page)
{
unsigned long flags;
}
}
- bitmap_zero(persistent_gnt->flags, PERSISTENT_GNT_FLAGS_SIZE);
- set_bit(PERSISTENT_GNT_ACTIVE, persistent_gnt->flags);
+ persistent_gnt->active = true;
/* Add new node and rebalance tree. */
rb_link_node(&(persistent_gnt->node), parent, new);
rb_insert_color(&(persistent_gnt->node), &ring->persistent_gnts);
else if (gref > data->gnt)
node = node->rb_right;
else {
- if(test_bit(PERSISTENT_GNT_ACTIVE, data->flags)) {
+ if (data->active) {
pr_alert_ratelimited("requesting a grant already in use\n");
return NULL;
}
- set_bit(PERSISTENT_GNT_ACTIVE, data->flags);
+ data->active = true;
atomic_inc(&ring->persistent_gnt_in_use);
return data;
}
static void put_persistent_gnt(struct xen_blkif_ring *ring,
struct persistent_gnt *persistent_gnt)
{
- if(!test_bit(PERSISTENT_GNT_ACTIVE, persistent_gnt->flags))
+ if (!persistent_gnt->active)
pr_alert_ratelimited("freeing a grant already unused\n");
- set_bit(PERSISTENT_GNT_WAS_ACTIVE, persistent_gnt->flags);
- clear_bit(PERSISTENT_GNT_ACTIVE, persistent_gnt->flags);
+ persistent_gnt->last_used = jiffies;
+ persistent_gnt->active = false;
atomic_dec(&ring->persistent_gnt_in_use);
}
struct persistent_gnt *persistent_gnt;
struct rb_node *n;
unsigned int num_clean, total;
- bool scan_used = false, clean_used = false;
+ bool scan_used = false;
struct rb_root *root;
- if (ring->persistent_gnt_c < xen_blkif_max_pgrants ||
- (ring->persistent_gnt_c == xen_blkif_max_pgrants &&
- !ring->blkif->vbd.overflow_max_grants)) {
- goto out;
- }
-
if (work_busy(&ring->persistent_purge_work)) {
pr_alert_ratelimited("Scheduled work from previous purge is still busy, cannot purge list\n");
goto out;
}
- num_clean = (xen_blkif_max_pgrants / 100) * LRU_PERCENT_CLEAN;
- num_clean = ring->persistent_gnt_c - xen_blkif_max_pgrants + num_clean;
- num_clean = min(ring->persistent_gnt_c, num_clean);
- if ((num_clean == 0) ||
- (num_clean > (ring->persistent_gnt_c - atomic_read(&ring->persistent_gnt_in_use))))
- goto out;
+ if (ring->persistent_gnt_c < xen_blkif_max_pgrants ||
+ (ring->persistent_gnt_c == xen_blkif_max_pgrants &&
+ !ring->blkif->vbd.overflow_max_grants)) {
+ num_clean = 0;
+ } else {
+ num_clean = (xen_blkif_max_pgrants / 100) * LRU_PERCENT_CLEAN;
+ num_clean = ring->persistent_gnt_c - xen_blkif_max_pgrants +
+ num_clean;
+ num_clean = min(ring->persistent_gnt_c, num_clean);
+ pr_debug("Going to purge at least %u persistent grants\n",
+ num_clean);
+ }
/*
* At this point, we can assure that there will be no calls
* number of grants.
*/
- total = num_clean;
-
- pr_debug("Going to purge %u persistent grants\n", num_clean);
+ total = 0;
BUG_ON(!list_empty(&ring->persistent_purge_list));
root = &ring->persistent_gnts;
BUG_ON(persistent_gnt->handle ==
BLKBACK_INVALID_HANDLE);
- if (clean_used) {
- clear_bit(PERSISTENT_GNT_WAS_ACTIVE, persistent_gnt->flags);
+ if (persistent_gnt->active)
continue;
- }
-
- if (test_bit(PERSISTENT_GNT_ACTIVE, persistent_gnt->flags))
+ if (!scan_used && !persistent_gnt_timeout(persistent_gnt))
continue;
- if (!scan_used &&
- (test_bit(PERSISTENT_GNT_WAS_ACTIVE, persistent_gnt->flags)))
+ if (scan_used && total >= num_clean)
continue;
rb_erase(&persistent_gnt->node, root);
list_add(&persistent_gnt->remove_node,
&ring->persistent_purge_list);
- if (--num_clean == 0)
- goto finished;
+ total++;
}
/*
- * If we get here it means we also need to start cleaning
+ * Check whether we also need to start cleaning
* grants that were used since last purge in order to cope
* with the requested num
*/
- if (!scan_used && !clean_used) {
- pr_debug("Still missing %u purged frames\n", num_clean);
+ if (!scan_used && total < num_clean) {
+ pr_debug("Still missing %u purged frames\n", num_clean - total);
scan_used = true;
goto purge_list;
}
-finished:
- if (!clean_used) {
- pr_debug("Finished scanning for grants to clean, removing used flag\n");
- clean_used = true;
- goto purge_list;
- }
- ring->persistent_gnt_c -= (total - num_clean);
- ring->blkif->vbd.overflow_max_grants = 0;
+ if (total) {
+ ring->persistent_gnt_c -= total;
+ ring->blkif->vbd.overflow_max_grants = 0;
- /* We can defer this work */
- schedule_work(&ring->persistent_purge_work);
- pr_debug("Purged %u/%u\n", (total - num_clean), total);
+ /* We can defer this work */
+ schedule_work(&ring->persistent_purge_work);
+ pr_debug("Purged %u/%u\n", num_clean, total);
+ }
out:
return;
struct backend_info;
-/* Number of available flags */
-#define PERSISTENT_GNT_FLAGS_SIZE 2
-/* This persistent grant is currently in use */
-#define PERSISTENT_GNT_ACTIVE 0
-/*
- * This persistent grant has been used, this flag is set when we remove the
- * PERSISTENT_GNT_ACTIVE, to know that this grant has been used recently.
- */
-#define PERSISTENT_GNT_WAS_ACTIVE 1
-
/* Number of requests that we can fit in a ring */
#define XEN_BLKIF_REQS_PER_PAGE 32
struct page *page;
grant_ref_t gnt;
grant_handle_t handle;
- DECLARE_BITMAP(flags, PERSISTENT_GNT_FLAGS_SIZE);
+ unsigned long last_used;
+ bool active;
struct rb_node node;
struct list_head remove_node;
};
wait_queue_head_t pending_free_wq;
/* Tree to store persistent grants. */
- spinlock_t pers_gnts_lock;
struct rb_root persistent_gnts;
unsigned int persistent_gnt_c;
atomic_t persistent_gnt_in_use;
#include <linux/scatterlist.h>
#include <linux/bitmap.h>
#include <linux/list.h>
+#include <linux/workqueue.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
static DEFINE_MUTEX(blkfront_mutex);
static const struct block_device_operations xlvbd_block_fops;
+static struct delayed_work blkfront_work;
+static LIST_HEAD(info_list);
/*
* Maximum number of segments in indirect requests, the actual value used by
/* Save uncomplete reqs and bios for migration. */
struct list_head requests;
struct bio_list bio_list;
+ struct list_head info_list;
};
static unsigned int nr_minors;
return err;
}
+static void free_info(struct blkfront_info *info)
+{
+ list_del(&info->info_list);
+ kfree(info);
+}
+
/* Common code used when first setting up, and when resuming. */
static int talk_to_blkback(struct xenbus_device *dev,
struct blkfront_info *info)
destroy_blkring:
blkif_free(info, 0);
- kfree(info);
+ mutex_lock(&blkfront_mutex);
+ free_info(info);
+ mutex_unlock(&blkfront_mutex);
+
dev_set_drvdata(&dev->dev, NULL);
return err;
info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
dev_set_drvdata(&dev->dev, info);
+ mutex_lock(&blkfront_mutex);
+ list_add(&info->info_list, &info_list);
+ mutex_unlock(&blkfront_mutex);
+
return 0;
}
if (indirect_segments <= BLKIF_MAX_SEGMENTS_PER_REQUEST)
indirect_segments = 0;
info->max_indirect_segments = indirect_segments;
+
+ if (info->feature_persistent) {
+ mutex_lock(&blkfront_mutex);
+ schedule_delayed_work(&blkfront_work, HZ * 10);
+ mutex_unlock(&blkfront_mutex);
+ }
}
/*
mutex_unlock(&info->mutex);
if (!bdev) {
- kfree(info);
+ mutex_lock(&blkfront_mutex);
+ free_info(info);
+ mutex_unlock(&blkfront_mutex);
return 0;
}
if (info && !bdev->bd_openers) {
xlvbd_release_gendisk(info);
disk->private_data = NULL;
- kfree(info);
+ mutex_lock(&blkfront_mutex);
+ free_info(info);
+ mutex_unlock(&blkfront_mutex);
}
mutex_unlock(&bdev->bd_mutex);
dev_info(disk_to_dev(bdev->bd_disk), "releasing disk\n");
xlvbd_release_gendisk(info);
disk->private_data = NULL;
- kfree(info);
+ free_info(info);
}
out:
.is_ready = blkfront_is_ready,
};
+static void purge_persistent_grants(struct blkfront_info *info)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ for (i = 0; i < info->nr_rings; i++) {
+ struct blkfront_ring_info *rinfo = &info->rinfo[i];
+ struct grant *gnt_list_entry, *tmp;
+
+ spin_lock_irqsave(&rinfo->ring_lock, flags);
+
+ if (rinfo->persistent_gnts_c == 0) {
+ spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+ continue;
+ }
+
+ list_for_each_entry_safe(gnt_list_entry, tmp, &rinfo->grants,
+ node) {
+ if (gnt_list_entry->gref == GRANT_INVALID_REF ||
+ gnttab_query_foreign_access(gnt_list_entry->gref))
+ continue;
+
+ list_del(&gnt_list_entry->node);
+ gnttab_end_foreign_access(gnt_list_entry->gref, 0, 0UL);
+ rinfo->persistent_gnts_c--;
+ __free_page(gnt_list_entry->page);
+ kfree(gnt_list_entry);
+ }
+
+ spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+ }
+}
+
+static void blkfront_delay_work(struct work_struct *work)
+{
+ struct blkfront_info *info;
+ bool need_schedule_work = false;
+
+ mutex_lock(&blkfront_mutex);
+
+ list_for_each_entry(info, &info_list, info_list) {
+ if (info->feature_persistent) {
+ need_schedule_work = true;
+ mutex_lock(&info->mutex);
+ purge_persistent_grants(info);
+ mutex_unlock(&info->mutex);
+ }
+ }
+
+ if (need_schedule_work)
+ schedule_delayed_work(&blkfront_work, HZ * 10);
+
+ mutex_unlock(&blkfront_mutex);
+}
+
static int __init xlblk_init(void)
{
int ret;
if (!xen_domain())
return -ENODEV;
+ if (!xen_has_pv_disk_devices())
+ return -ENODEV;
+
+ if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
+ pr_warn("xen_blk: can't get major %d with name %s\n",
+ XENVBD_MAJOR, DEV_NAME);
+ return -ENODEV;
+ }
+
if (xen_blkif_max_segments < BLKIF_MAX_SEGMENTS_PER_REQUEST)
xen_blkif_max_segments = BLKIF_MAX_SEGMENTS_PER_REQUEST;
xen_blkif_max_queues = nr_cpus;
}
- if (!xen_has_pv_disk_devices())
- return -ENODEV;
-
- if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
- printk(KERN_WARNING "xen_blk: can't get major %d with name %s\n",
- XENVBD_MAJOR, DEV_NAME);
- return -ENODEV;
- }
+ INIT_DELAYED_WORK(&blkfront_work, blkfront_delay_work);
ret = xenbus_register_frontend(&blkfront_driver);
if (ret) {
static void __exit xlblk_exit(void)
{
+ cancel_delayed_work_sync(&blkfront_work);
+
xenbus_unregister_driver(&blkfront_driver);
unregister_blkdev(XENVBD_MAJOR, DEV_NAME);
kfree(minors);
depends on BT_HCIUART
depends on BT_HCIUART_SERDEV
depends on GPIOLIB
+ depends on ACPI
select BT_HCIUART_3WIRE
select BT_RTL
help
fw_size = fw->size;
/* The size of patch header is 30 bytes, should be skip */
- if (fw_size < 30)
- return -EINVAL;
+ if (fw_size < 30) {
+ err = -EINVAL;
+ goto free_fw;
+ }
fw_size -= 30;
fw_ptr += 30;
fw_ptr += dlen;
}
+free_fw:
release_firmware(fw);
-
return err;
}
/**
* syc_ioremap - ioremap register space for the interconnect target module
- * @ddata: deviec driver data
+ * @ddata: device driver data
*
* Note that the interconnect target module registers can be anywhere
- * within the first child device address space. For example, SGX has
- * them at offset 0x1fc00 in the 32MB module address space. We just
- * what we need around the interconnect target module registers.
+ * within the interconnect target module range. For example, SGX has
+ * them at offset 0x1fc00 in the 32MB module address space. And cpsw
+ * has them at offset 0x1200 in the CPSW_WR child. Usually the
+ * the interconnect target module registers are at the beginning of
+ * the module range though.
*/
static int sysc_ioremap(struct sysc *ddata)
{
- u32 size = 0;
-
- if (ddata->offsets[SYSC_SYSSTATUS] >= 0)
- size = ddata->offsets[SYSC_SYSSTATUS];
- else if (ddata->offsets[SYSC_SYSCONFIG] >= 0)
- size = ddata->offsets[SYSC_SYSCONFIG];
- else if (ddata->offsets[SYSC_REVISION] >= 0)
- size = ddata->offsets[SYSC_REVISION];
- else
- return -EINVAL;
+ int size;
- size &= 0xfff00;
- size += SZ_256;
+ size = max3(ddata->offsets[SYSC_REVISION],
+ ddata->offsets[SYSC_SYSCONFIG],
+ ddata->offsets[SYSC_SYSSTATUS]);
+
+ if (size < 0 || (size + sizeof(u32)) > ddata->module_size)
+ return -EINVAL;
ddata->module_va = devm_ioremap(ddata->dev,
ddata->module_pa,
- size);
+ size + sizeof(u32));
if (!ddata->module_va)
return -EIO;
if (!pm_runtime_status_suspended(dev)) {
error = pm_generic_runtime_suspend(dev);
if (error) {
- dev_err(dev, "%s error at %i: %i\n",
- __func__, __LINE__, error);
+ dev_warn(dev, "%s busy at %i: %i\n",
+ __func__, __LINE__, error);
- return error;
+ return 0;
}
error = sysc_runtime_suspend(ddata->dev);
if (!CDROM_CAN(CDC_SELECT_DISC) ||
(arg == CDSL_CURRENT || arg == CDSL_NONE))
return cdi->ops->drive_status(cdi, CDSL_CURRENT);
- if (((int)arg >= cdi->capacity))
+ if (arg >= cdi->capacity)
return -EINVAL;
return cdrom_slot_status(cdi, arg);
}
if (!clk_base)
goto npcm7xx_init_error;
- npcm7xx_clk_data = kzalloc(sizeof(*npcm7xx_clk_data->hws) *
- NPCM7XX_NUM_CLOCKS + sizeof(npcm7xx_clk_data), GFP_KERNEL);
+ npcm7xx_clk_data = kzalloc(struct_size(npcm7xx_clk_data, hws,
+ NPCM7XX_NUM_CLOCKS), GFP_KERNEL);
if (!npcm7xx_clk_data)
goto npcm7xx_init_np_err;
clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
- clk_set_parent(hws[ST_CLK_MUX]->clk, hws[ST_CLK_25M]->clk);
+ clk_set_parent(hws[ST_CLK_MUX]->clk, hws[ST_CLK_48M]->clk);
hws[ST_CLK_GATE] = clk_hw_register_gate(NULL, "oscout1", "oscout1_mux",
0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
if (idx == -1)
idx = i; /* first enabled state */
if (s->target_residency > data->predicted_us) {
- if (!tick_nohz_tick_stopped())
+ if (data->predicted_us < TICK_USEC)
break;
+ if (!tick_nohz_tick_stopped()) {
+ /*
+ * If the state selected so far is shallow,
+ * waking up early won't hurt, so retain the
+ * tick in that case and let the governor run
+ * again in the next iteration of the loop.
+ */
+ expected_interval = drv->states[idx].target_residency;
+ break;
+ }
+
/*
* If the state selected so far is shallow and this
* state's target residency matches the time till the
int ret = 0;
if (keylen != 2 * AES_MIN_KEY_SIZE && keylen != 2 * AES_MAX_KEY_SIZE) {
- crypto_ablkcipher_set_flags(ablkcipher,
- CRYPTO_TFM_RES_BAD_KEY_LEN);
dev_err(jrdev, "key size mismatch\n");
- return -EINVAL;
+ goto badkey;
}
ctx->cdata.keylen = keylen;
return ret;
badkey:
crypto_ablkcipher_set_flags(ablkcipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
- return 0;
+ return -EINVAL;
}
/*
dma_unmap_single(dev, pdb->d_dma, key->d_sz, DMA_TO_DEVICE);
dma_unmap_single(dev, pdb->p_dma, p_sz, DMA_TO_DEVICE);
dma_unmap_single(dev, pdb->q_dma, q_sz, DMA_TO_DEVICE);
- dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_TO_DEVICE);
- dma_unmap_single(dev, pdb->tmp2_dma, q_sz, DMA_TO_DEVICE);
+ dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_BIDIRECTIONAL);
+ dma_unmap_single(dev, pdb->tmp2_dma, q_sz, DMA_BIDIRECTIONAL);
}
static void rsa_priv_f3_unmap(struct device *dev, struct rsa_edesc *edesc,
dma_unmap_single(dev, pdb->dp_dma, p_sz, DMA_TO_DEVICE);
dma_unmap_single(dev, pdb->dq_dma, q_sz, DMA_TO_DEVICE);
dma_unmap_single(dev, pdb->c_dma, p_sz, DMA_TO_DEVICE);
- dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_TO_DEVICE);
- dma_unmap_single(dev, pdb->tmp2_dma, q_sz, DMA_TO_DEVICE);
+ dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_BIDIRECTIONAL);
+ dma_unmap_single(dev, pdb->tmp2_dma, q_sz, DMA_BIDIRECTIONAL);
}
/* RSA Job Completion handler */
goto unmap_p;
}
- pdb->tmp1_dma = dma_map_single(dev, key->tmp1, p_sz, DMA_TO_DEVICE);
+ pdb->tmp1_dma = dma_map_single(dev, key->tmp1, p_sz, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, pdb->tmp1_dma)) {
dev_err(dev, "Unable to map RSA tmp1 memory\n");
goto unmap_q;
}
- pdb->tmp2_dma = dma_map_single(dev, key->tmp2, q_sz, DMA_TO_DEVICE);
+ pdb->tmp2_dma = dma_map_single(dev, key->tmp2, q_sz, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, pdb->tmp2_dma)) {
dev_err(dev, "Unable to map RSA tmp2 memory\n");
goto unmap_tmp1;
return 0;
unmap_tmp1:
- dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_TO_DEVICE);
+ dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_BIDIRECTIONAL);
unmap_q:
dma_unmap_single(dev, pdb->q_dma, q_sz, DMA_TO_DEVICE);
unmap_p:
goto unmap_dq;
}
- pdb->tmp1_dma = dma_map_single(dev, key->tmp1, p_sz, DMA_TO_DEVICE);
+ pdb->tmp1_dma = dma_map_single(dev, key->tmp1, p_sz, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, pdb->tmp1_dma)) {
dev_err(dev, "Unable to map RSA tmp1 memory\n");
goto unmap_qinv;
}
- pdb->tmp2_dma = dma_map_single(dev, key->tmp2, q_sz, DMA_TO_DEVICE);
+ pdb->tmp2_dma = dma_map_single(dev, key->tmp2, q_sz, DMA_BIDIRECTIONAL);
if (dma_mapping_error(dev, pdb->tmp2_dma)) {
dev_err(dev, "Unable to map RSA tmp2 memory\n");
goto unmap_tmp1;
return 0;
unmap_tmp1:
- dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_TO_DEVICE);
+ dma_unmap_single(dev, pdb->tmp1_dma, p_sz, DMA_BIDIRECTIONAL);
unmap_qinv:
dma_unmap_single(dev, pdb->c_dma, p_sz, DMA_TO_DEVICE);
unmap_dq:
BUG_ON(CIRC_CNT(head, tail + i, JOBR_DEPTH) <= 0);
/* Unmap just-run descriptor so we can post-process */
- dma_unmap_single(dev, jrp->outring[hw_idx].desc,
+ dma_unmap_single(dev,
+ caam_dma_to_cpu(jrp->outring[hw_idx].desc),
jrp->entinfo[sw_idx].desc_size,
DMA_TO_DEVICE);
/* requests in backlog queues */
atomic_t backlog_count;
+ int write_idx;
/* command size 32B/64B */
u8 instr_size;
u8 qno;
struct bh_data *slc;
};
-/* NITROX-5 driver state */
+/* NITROX-V driver state */
#define NITROX_UCODE_LOADED 0
#define NITROX_READY 1
cmdq->head = PTR_ALIGN(cmdq->head_unaligned, PKT_IN_ALIGN);
cmdq->dma = PTR_ALIGN(cmdq->dma_unaligned, PKT_IN_ALIGN);
cmdq->qsize = (qsize + PKT_IN_ALIGN);
+ cmdq->write_idx = 0;
spin_lock_init(&cmdq->response_lock);
spin_lock_init(&cmdq->cmdq_lock);
* Invalid flag options in AES-CCM IV.
*/
+static inline int incr_index(int index, int count, int max)
+{
+ if ((index + count) >= max)
+ index = index + count - max;
+ else
+ index += count;
+
+ return index;
+}
+
/**
* dma_free_sglist - unmap and free the sg lists.
* @ndev: N5 device
struct nitrox_cmdq *cmdq)
{
struct nitrox_device *ndev = sr->ndev;
- union nps_pkt_in_instr_baoff_dbell pkt_in_baoff_dbell;
- u64 offset;
+ int idx;
u8 *ent;
spin_lock_bh(&cmdq->cmdq_lock);
- /* get the next write offset */
- offset = NPS_PKT_IN_INSTR_BAOFF_DBELLX(cmdq->qno);
- pkt_in_baoff_dbell.value = nitrox_read_csr(ndev, offset);
+ idx = cmdq->write_idx;
/* copy the instruction */
- ent = cmdq->head + pkt_in_baoff_dbell.s.aoff;
+ ent = cmdq->head + (idx * cmdq->instr_size);
memcpy(ent, &sr->instr, cmdq->instr_size);
- /* flush the command queue updates */
- dma_wmb();
- sr->tstamp = jiffies;
atomic_set(&sr->status, REQ_POSTED);
response_list_add(sr, cmdq);
+ sr->tstamp = jiffies;
+ /* flush the command queue updates */
+ dma_wmb();
/* Ring doorbell with count 1 */
writeq(1, cmdq->dbell_csr_addr);
/* orders the doorbell rings */
mmiowb();
+ cmdq->write_idx = incr_index(idx, 1, ndev->qlen);
+
spin_unlock_bh(&cmdq->cmdq_lock);
}
struct nitrox_softreq *sr, *tmp;
int ret = 0;
+ if (!atomic_read(&cmdq->backlog_count))
+ return 0;
+
spin_lock_bh(&cmdq->backlog_lock);
list_for_each_entry_safe(sr, tmp, &cmdq->backlog_head, backlog) {
/* submit until space available */
if (unlikely(cmdq_full(cmdq, ndev->qlen))) {
- ret = -EBUSY;
+ ret = -ENOSPC;
break;
}
/* delete from backlog list */
{
struct nitrox_cmdq *cmdq = sr->cmdq;
struct nitrox_device *ndev = sr->ndev;
- int ret = -EBUSY;
+
+ /* try to post backlog requests */
+ post_backlog_cmds(cmdq);
if (unlikely(cmdq_full(cmdq, ndev->qlen))) {
if (!(sr->flags & CRYPTO_TFM_REQ_MAY_BACKLOG))
- return -EAGAIN;
-
+ return -ENOSPC;
+ /* add to backlog list */
backlog_list_add(sr, cmdq);
- } else {
- ret = post_backlog_cmds(cmdq);
- if (ret) {
- backlog_list_add(sr, cmdq);
- return ret;
- }
- post_se_instr(sr, cmdq);
- ret = -EINPROGRESS;
+ return -EBUSY;
}
- return ret;
+ post_se_instr(sr, cmdq);
+
+ return -EINPROGRESS;
}
/**
*/
sr->instr.fdata[0] = *((u64 *)&req->gph);
sr->instr.fdata[1] = 0;
- /* flush the soft_req changes before posting the cmd */
- wmb();
ret = nitrox_enqueue_request(sr);
- if (ret == -EAGAIN)
+ if (ret == -ENOSPC)
goto send_fail;
return ret;
CSK_CONN_INLINE, /* Connection on HW */
};
+enum chtls_cdev_state {
+ CHTLS_CDEV_STATE_UP = 1
+};
+
struct listen_ctx {
struct sock *lsk;
struct chtls_dev *cdev;
unsigned int send_page_order;
int max_host_sndbuf;
struct key_map kmap;
+ unsigned int cdev_state;
};
struct chtls_hws {
tlsdev->hash = chtls_create_hash;
tlsdev->unhash = chtls_destroy_hash;
tls_register_device(&cdev->tlsdev);
+ cdev->cdev_state = CHTLS_CDEV_STATE_UP;
}
static void chtls_unregister_dev(struct chtls_dev *cdev)
struct chtls_dev *cdev, *tmp;
mutex_lock(&cdev_mutex);
- list_for_each_entry_safe(cdev, tmp, &cdev_list, list)
- chtls_free_uld(cdev);
+ list_for_each_entry_safe(cdev, tmp, &cdev_list, list) {
+ if (cdev->cdev_state == CHTLS_CDEV_STATE_UP)
+ chtls_free_uld(cdev);
+ }
mutex_unlock(&cdev_mutex);
}
ret = crypto_skcipher_encrypt(req);
skcipher_request_zero(req);
} else {
- preempt_disable();
- pagefault_disable();
- enable_kernel_vsx();
-
blkcipher_walk_init(&walk, dst, src, nbytes);
ret = blkcipher_walk_virt(desc, &walk);
while ((nbytes = walk.nbytes)) {
+ preempt_disable();
+ pagefault_disable();
+ enable_kernel_vsx();
aes_p8_cbc_encrypt(walk.src.virt.addr,
walk.dst.virt.addr,
nbytes & AES_BLOCK_MASK,
&ctx->enc_key, walk.iv, 1);
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
+
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, &walk, nbytes);
}
-
- disable_kernel_vsx();
- pagefault_enable();
- preempt_enable();
}
return ret;
ret = crypto_skcipher_decrypt(req);
skcipher_request_zero(req);
} else {
- preempt_disable();
- pagefault_disable();
- enable_kernel_vsx();
-
blkcipher_walk_init(&walk, dst, src, nbytes);
ret = blkcipher_walk_virt(desc, &walk);
while ((nbytes = walk.nbytes)) {
+ preempt_disable();
+ pagefault_disable();
+ enable_kernel_vsx();
aes_p8_cbc_encrypt(walk.src.virt.addr,
walk.dst.virt.addr,
nbytes & AES_BLOCK_MASK,
&ctx->dec_key, walk.iv, 0);
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
+
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, &walk, nbytes);
}
-
- disable_kernel_vsx();
- pagefault_enable();
- preempt_enable();
}
return ret;
ret = enc? crypto_skcipher_encrypt(req) : crypto_skcipher_decrypt(req);
skcipher_request_zero(req);
} else {
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+
+ ret = blkcipher_walk_virt(desc, &walk);
+
preempt_disable();
pagefault_disable();
enable_kernel_vsx();
- blkcipher_walk_init(&walk, dst, src, nbytes);
-
- ret = blkcipher_walk_virt(desc, &walk);
iv = walk.iv;
memset(tweak, 0, AES_BLOCK_SIZE);
aes_p8_encrypt(iv, tweak, &ctx->tweak_key);
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
+
while ((nbytes = walk.nbytes)) {
+ preempt_disable();
+ pagefault_disable();
+ enable_kernel_vsx();
if (enc)
aes_p8_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
nbytes & AES_BLOCK_MASK, &ctx->enc_key, NULL, tweak);
else
aes_p8_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
nbytes & AES_BLOCK_MASK, &ctx->dec_key, NULL, tweak);
+ disable_kernel_vsx();
+ pagefault_enable();
+ preempt_enable();
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, &walk, nbytes);
}
-
- disable_kernel_vsx();
- pagefault_enable();
- preempt_enable();
}
return ret;
}
if (r)
return r;
- if (chunk_ib->flags & AMDGPU_IB_FLAG_PREAMBLE) {
- parser->job->preamble_status |= AMDGPU_PREAMBLE_IB_PRESENT;
- if (!parser->ctx->preamble_presented) {
- parser->job->preamble_status |= AMDGPU_PREAMBLE_IB_PRESENT_FIRST;
- parser->ctx->preamble_presented = true;
- }
- }
+ if (chunk_ib->flags & AMDGPU_IB_FLAG_PREAMBLE)
+ parser->job->preamble_status |=
+ AMDGPU_PREAMBLE_IB_PRESENT;
if (parser->ring && parser->ring != ring)
return -EINVAL;
int r;
+ job = p->job;
+ p->job = NULL;
+
+ r = drm_sched_job_init(&job->base, entity, p->filp);
+ if (r)
+ goto error_unlock;
+
+ /* No memory allocation is allowed while holding the mn lock */
amdgpu_mn_lock(p->mn);
amdgpu_bo_list_for_each_userptr_entry(e, p->bo_list) {
struct amdgpu_bo *bo = e->robj;
if (amdgpu_ttm_tt_userptr_needs_pages(bo->tbo.ttm)) {
- amdgpu_mn_unlock(p->mn);
- return -ERESTARTSYS;
+ r = -ERESTARTSYS;
+ goto error_abort;
}
}
- job = p->job;
- p->job = NULL;
-
- r = drm_sched_job_init(&job->base, entity, p->filp);
- if (r) {
- amdgpu_job_free(job);
- amdgpu_mn_unlock(p->mn);
- return r;
- }
-
job->owner = p->filp;
p->fence = dma_fence_get(&job->base.s_fence->finished);
amdgpu_cs_post_dependencies(p);
+ if ((job->preamble_status & AMDGPU_PREAMBLE_IB_PRESENT) &&
+ !p->ctx->preamble_presented) {
+ job->preamble_status |= AMDGPU_PREAMBLE_IB_PRESENT_FIRST;
+ p->ctx->preamble_presented = true;
+ }
+
cs->out.handle = seq;
job->uf_sequence = seq;
amdgpu_mn_unlock(p->mn);
return 0;
+
+error_abort:
+ dma_fence_put(&job->base.s_fence->finished);
+ job->base.s_fence = NULL;
+
+error_unlock:
+ amdgpu_job_free(job);
+ amdgpu_mn_unlock(p->mn);
+ return r;
}
int amdgpu_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
return r;
}
+ need_ctx_switch = ring->current_ctx != fence_ctx;
if (ring->funcs->emit_pipeline_sync && job &&
((tmp = amdgpu_sync_get_fence(&job->sched_sync, NULL)) ||
+ (amdgpu_sriov_vf(adev) && need_ctx_switch) ||
amdgpu_vm_need_pipeline_sync(ring, job))) {
need_pipe_sync = true;
dma_fence_put(tmp);
}
skip_preamble = ring->current_ctx == fence_ctx;
- need_ctx_switch = ring->current_ctx != fence_ctx;
if (job && ring->funcs->emit_cntxcntl) {
if (need_ctx_switch)
status |= AMDGPU_HAVE_CTX_SWITCH;
amdgpu_fence_wait_empty(ring);
}
- mutex_lock(&adev->pm.mutex);
- /* update battery/ac status */
- if (power_supply_is_system_supplied() > 0)
- adev->pm.ac_power = true;
- else
- adev->pm.ac_power = false;
- mutex_unlock(&adev->pm.mutex);
-
if (adev->powerplay.pp_funcs->dispatch_tasks) {
if (!amdgpu_device_has_dc_support(adev)) {
mutex_lock(&adev->pm.mutex);
* is validated on next vm use to avoid fault.
* */
list_move_tail(&base->vm_status, &vm->evicted);
+ base->moved = true;
}
/**
uint64_t addr;
int r;
- addr = amdgpu_bo_gpu_offset(bo);
entries = amdgpu_bo_size(bo) / 8;
if (pte_support_ats) {
if (r)
goto error;
+ addr = amdgpu_bo_gpu_offset(bo);
if (ats_entries) {
uint64_t ats_value;
* amdgpu_vm_adjust_size - adjust vm size, block size and fragment size
*
* @adev: amdgpu_device pointer
- * @vm_size: the default vm size if it's set auto
+ * @min_vm_size: the minimum vm size in GB if it's set auto
* @fragment_size_default: Default PTE fragment size
* @max_level: max VMPT level
* @max_bits: max address space size in bits
*
*/
-void amdgpu_vm_adjust_size(struct amdgpu_device *adev, uint32_t vm_size,
+void amdgpu_vm_adjust_size(struct amdgpu_device *adev, uint32_t min_vm_size,
uint32_t fragment_size_default, unsigned max_level,
unsigned max_bits)
{
+ unsigned int max_size = 1 << (max_bits - 30);
+ unsigned int vm_size;
uint64_t tmp;
/* adjust vm size first */
if (amdgpu_vm_size != -1) {
- unsigned max_size = 1 << (max_bits - 30);
-
vm_size = amdgpu_vm_size;
if (vm_size > max_size) {
dev_warn(adev->dev, "VM size (%d) too large, max is %u GB\n",
amdgpu_vm_size, max_size);
vm_size = max_size;
}
+ } else {
+ struct sysinfo si;
+ unsigned int phys_ram_gb;
+
+ /* Optimal VM size depends on the amount of physical
+ * RAM available. Underlying requirements and
+ * assumptions:
+ *
+ * - Need to map system memory and VRAM from all GPUs
+ * - VRAM from other GPUs not known here
+ * - Assume VRAM <= system memory
+ * - On GFX8 and older, VM space can be segmented for
+ * different MTYPEs
+ * - Need to allow room for fragmentation, guard pages etc.
+ *
+ * This adds up to a rough guess of system memory x3.
+ * Round up to power of two to maximize the available
+ * VM size with the given page table size.
+ */
+ si_meminfo(&si);
+ phys_ram_gb = ((uint64_t)si.totalram * si.mem_unit +
+ (1 << 30) - 1) >> 30;
+ vm_size = roundup_pow_of_two(
+ min(max(phys_ram_gb * 3, min_vm_size), max_size));
}
adev->vm_manager.max_pfn = (uint64_t)vm_size << 18;
void amdgpu_vm_bo_trace_cs(struct amdgpu_vm *vm, struct ww_acquire_ctx *ticket);
void amdgpu_vm_bo_rmv(struct amdgpu_device *adev,
struct amdgpu_bo_va *bo_va);
-void amdgpu_vm_adjust_size(struct amdgpu_device *adev, uint32_t vm_size,
+void amdgpu_vm_adjust_size(struct amdgpu_device *adev, uint32_t min_vm_size,
uint32_t fragment_size_default, unsigned max_level,
unsigned max_bits);
int amdgpu_vm_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
if (amdgpu_sriov_vf(adev))
return 0;
+ if (adev->pg_flags & (AMD_PG_SUPPORT_GFX_SMG |
+ AMD_PG_SUPPORT_RLC_SMU_HS |
+ AMD_PG_SUPPORT_CP |
+ AMD_PG_SUPPORT_GFX_DMG))
+ adev->gfx.rlc.funcs->enter_safe_mode(adev);
switch (adev->asic_type) {
case CHIP_CARRIZO:
case CHIP_STONEY:
default:
break;
}
-
+ if (adev->pg_flags & (AMD_PG_SUPPORT_GFX_SMG |
+ AMD_PG_SUPPORT_RLC_SMU_HS |
+ AMD_PG_SUPPORT_CP |
+ AMD_PG_SUPPORT_GFX_DMG))
+ adev->gfx.rlc.funcs->exit_safe_mode(adev);
return 0;
}
amdgpu_gart_table_vram_unpin(adev);
}
-static void gmc_v6_0_gart_fini(struct amdgpu_device *adev)
-{
- amdgpu_gart_table_vram_free(adev);
- amdgpu_gart_fini(adev);
-}
-
static void gmc_v6_0_vm_decode_fault(struct amdgpu_device *adev,
u32 status, u32 addr, u32 mc_client)
{
amdgpu_gem_force_release(adev);
amdgpu_vm_manager_fini(adev);
- gmc_v6_0_gart_fini(adev);
+ amdgpu_gart_table_vram_free(adev);
amdgpu_bo_fini(adev);
+ amdgpu_gart_fini(adev);
release_firmware(adev->gmc.fw);
adev->gmc.fw = NULL;
amdgpu_gart_table_vram_unpin(adev);
}
-/**
- * gmc_v7_0_gart_fini - vm fini callback
- *
- * @adev: amdgpu_device pointer
- *
- * Tears down the driver GART/VM setup (CIK).
- */
-static void gmc_v7_0_gart_fini(struct amdgpu_device *adev)
-{
- amdgpu_gart_table_vram_free(adev);
- amdgpu_gart_fini(adev);
-}
-
/**
* gmc_v7_0_vm_decode_fault - print human readable fault info
*
amdgpu_gem_force_release(adev);
amdgpu_vm_manager_fini(adev);
kfree(adev->gmc.vm_fault_info);
- gmc_v7_0_gart_fini(adev);
+ amdgpu_gart_table_vram_free(adev);
amdgpu_bo_fini(adev);
+ amdgpu_gart_fini(adev);
release_firmware(adev->gmc.fw);
adev->gmc.fw = NULL;
amdgpu_gart_table_vram_unpin(adev);
}
-/**
- * gmc_v8_0_gart_fini - vm fini callback
- *
- * @adev: amdgpu_device pointer
- *
- * Tears down the driver GART/VM setup (CIK).
- */
-static void gmc_v8_0_gart_fini(struct amdgpu_device *adev)
-{
- amdgpu_gart_table_vram_free(adev);
- amdgpu_gart_fini(adev);
-}
-
/**
* gmc_v8_0_vm_decode_fault - print human readable fault info
*
amdgpu_gem_force_release(adev);
amdgpu_vm_manager_fini(adev);
kfree(adev->gmc.vm_fault_info);
- gmc_v8_0_gart_fini(adev);
+ amdgpu_gart_table_vram_free(adev);
amdgpu_bo_fini(adev);
+ amdgpu_gart_fini(adev);
release_firmware(adev->gmc.fw);
adev->gmc.fw = NULL;
return 0;
}
-/**
- * gmc_v9_0_gart_fini - vm fini callback
- *
- * @adev: amdgpu_device pointer
- *
- * Tears down the driver GART/VM setup (CIK).
- */
-static void gmc_v9_0_gart_fini(struct amdgpu_device *adev)
-{
- amdgpu_gart_table_vram_free(adev);
- amdgpu_gart_fini(adev);
-}
-
static int gmc_v9_0_sw_fini(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
amdgpu_gem_force_release(adev);
amdgpu_vm_manager_fini(adev);
- gmc_v9_0_gart_fini(adev);
/*
* TODO:
*/
amdgpu_bo_free_kernel(&adev->stolen_vga_memory, NULL, NULL);
+ amdgpu_gart_table_vram_free(adev);
amdgpu_bo_fini(adev);
+ amdgpu_gart_fini(adev);
return 0;
}
int min_temp, int max_temp);
static int kv_init_fps_limits(struct amdgpu_device *adev);
-static void kv_dpm_powergate_uvd(void *handle, bool gate);
-static void kv_dpm_powergate_vce(struct amdgpu_device *adev, bool gate);
static void kv_dpm_powergate_samu(struct amdgpu_device *adev, bool gate);
static void kv_dpm_powergate_acp(struct amdgpu_device *adev, bool gate);
return ret;
}
- kv_update_current_ps(adev, adev->pm.dpm.boot_ps);
-
if (adev->irq.installed &&
amdgpu_is_internal_thermal_sensor(adev->pm.int_thermal_type)) {
ret = kv_set_thermal_temperature_range(adev, KV_TEMP_RANGE_MIN, KV_TEMP_RANGE_MAX);
static void kv_dpm_disable(struct amdgpu_device *adev)
{
+ struct kv_power_info *pi = kv_get_pi(adev);
+
amdgpu_irq_put(adev, &adev->pm.dpm.thermal.irq,
AMDGPU_THERMAL_IRQ_LOW_TO_HIGH);
amdgpu_irq_put(adev, &adev->pm.dpm.thermal.irq,
/* powerup blocks */
kv_dpm_powergate_acp(adev, false);
kv_dpm_powergate_samu(adev, false);
- kv_dpm_powergate_vce(adev, false);
- kv_dpm_powergate_uvd(adev, false);
+ if (pi->caps_vce_pg) /* power on the VCE block */
+ amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_VCEPowerON);
+ if (pi->caps_uvd_pg) /* power on the UVD block */
+ amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_UVDPowerON);
kv_enable_smc_cac(adev, false);
kv_enable_didt(adev, false);
int ret;
if (amdgpu_new_state->evclk > 0 && amdgpu_current_state->evclk == 0) {
- kv_dpm_powergate_vce(adev, false);
if (pi->caps_stable_p_state)
pi->vce_boot_level = table->count - 1;
else
kv_enable_vce_dpm(adev, true);
} else if (amdgpu_new_state->evclk == 0 && amdgpu_current_state->evclk > 0) {
kv_enable_vce_dpm(adev, false);
- kv_dpm_powergate_vce(adev, true);
}
return 0;
}
}
-static void kv_dpm_powergate_vce(struct amdgpu_device *adev, bool gate)
+static void kv_dpm_powergate_vce(void *handle, bool gate)
{
+ struct amdgpu_device *adev = (struct amdgpu_device *)handle;
struct kv_power_info *pi = kv_get_pi(adev);
-
- if (pi->vce_power_gated == gate)
- return;
+ int ret;
pi->vce_power_gated = gate;
- if (!pi->caps_vce_pg)
- return;
-
- if (gate)
- amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_VCEPowerOFF);
- else
- amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_VCEPowerON);
+ if (gate) {
+ /* stop the VCE block */
+ ret = amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+ AMD_PG_STATE_GATE);
+ kv_enable_vce_dpm(adev, false);
+ if (pi->caps_vce_pg) /* power off the VCE block */
+ amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_VCEPowerOFF);
+ } else {
+ if (pi->caps_vce_pg) /* power on the VCE block */
+ amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_VCEPowerON);
+ kv_enable_vce_dpm(adev, true);
+ /* re-init the VCE block */
+ ret = amdgpu_device_ip_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_VCE,
+ AMD_PG_STATE_UNGATE);
+ }
}
+
static void kv_dpm_powergate_samu(struct amdgpu_device *adev, bool gate)
{
struct kv_power_info *pi = kv_get_pi(adev);
else
adev->pm.dpm_enabled = true;
mutex_unlock(&adev->pm.mutex);
-
+ amdgpu_pm_compute_clocks(adev);
return ret;
}
case AMD_IP_BLOCK_TYPE_UVD:
kv_dpm_powergate_uvd(handle, gate);
break;
+ case AMD_IP_BLOCK_TYPE_VCE:
+ kv_dpm_powergate_vce(handle, gate);
+ break;
default:
break;
}
si_enable_auto_throttle_source(adev, AMDGPU_DPM_AUTO_THROTTLE_SRC_THERMAL, true);
si_thermal_start_thermal_controller(adev);
- ni_update_current_ps(adev, boot_ps);
return 0;
}
else
adev->pm.dpm_enabled = true;
mutex_unlock(&adev->pm.mutex);
-
+ amdgpu_pm_compute_clocks(adev);
return ret;
}
{
struct dc_context *ctx = pp->ctx;
struct amdgpu_device *adev = ctx->driver_context;
+ void *pp_handle = adev->powerplay.pp_handle;
const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs;
+ struct pp_display_clock_request clock = {0};
- if (!pp_funcs || !pp_funcs->display_configuration_changed)
+ if (!pp_funcs || !pp_funcs->display_clock_voltage_request)
return;
- amdgpu_dpm_display_configuration_changed(adev);
+ clock.clock_type = amd_pp_dcf_clock;
+ clock.clock_freq_in_khz = req->hard_min_dcefclk_khz;
+ pp_funcs->display_clock_voltage_request(pp_handle, &clock);
+
+ clock.clock_type = amd_pp_f_clock;
+ clock.clock_freq_in_khz = req->hard_min_fclk_khz;
+ pp_funcs->display_clock_voltage_request(pp_handle, &clock);
}
void pp_rv_set_wm_ranges(struct pp_smu *pp,
* fail-safe mode
*/
if (dc_is_hdmi_signal(link->connector_signal) ||
- dc_is_dvi_signal(link->connector_signal))
+ dc_is_dvi_signal(link->connector_signal)) {
+ if (prev_sink != NULL)
+ dc_sink_release(prev_sink);
+
return false;
+ }
default:
break;
}
vma->flags |= I915_VMA_GGTT;
list_add(&vma->obj_link, &obj->vma_list);
} else {
- i915_ppgtt_get(i915_vm_to_ppgtt(vm));
list_add_tail(&vma->obj_link, &obj->vma_list);
}
if (vma->obj)
rb_erase(&vma->obj_node, &vma->obj->vma_tree);
- if (!i915_vma_is_ggtt(vma))
- i915_ppgtt_put(i915_vm_to_ppgtt(vma->vm));
-
rbtree_postorder_for_each_entry_safe(iter, n, &vma->active, node) {
GEM_BUG_ON(i915_gem_active_isset(&iter->base));
kfree(iter);
{
int ret;
- if (INTEL_INFO(dev_priv)->num_pipes == 0)
- return;
-
ret = component_add(dev_priv->drm.dev, &i915_audio_component_bind_ops);
if (ret < 0) {
DRM_ERROR("failed to add audio component (%d)\n", ret);
int w = drm_rect_width(&plane_state->base.src) >> 16;
int h = drm_rect_height(&plane_state->base.src) >> 16;
int dst_x = plane_state->base.dst.x1;
+ int dst_w = drm_rect_width(&plane_state->base.dst);
int pipe_src_w = crtc_state->pipe_src_w;
int max_width = skl_max_plane_width(fb, 0, rotation);
int max_height = 4096;
* screen may cause FIFO underflow and display corruption.
*/
if ((IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
- (dst_x + w < 4 || dst_x > pipe_src_w - 4)) {
+ (dst_x + dst_w < 4 || dst_x > pipe_src_w - 4)) {
DRM_DEBUG_KMS("requested plane X %s position %d invalid (valid range %d-%d)\n",
- dst_x + w < 4 ? "end" : "start",
- dst_x + w < 4 ? dst_x + w : dst_x,
+ dst_x + dst_w < 4 ? "end" : "start",
+ dst_x + dst_w < 4 ? dst_x + dst_w : dst_x,
4, pipe_src_w - 4);
return -ERANGE;
}
ret = i2c_transfer(adapter, &msg, 1);
if (ret == 1)
- return 0;
- return ret >= 0 ? -EIO : ret;
+ ret = 0;
+ else if (ret >= 0)
+ ret = -EIO;
+
+ kfree(write_buf);
+ return ret;
}
static
DRM_DEBUG_KMS("Waiting for LSPCON mode %s to settle\n",
lspcon_mode_name(mode));
- wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, 100);
+ wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, 400);
if (current_mode != mode)
DRM_ERROR("LSPCON mode hasn't settled\n");
writel(0x0, comp->regs + DISP_REG_OVL_RST);
}
+static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
+{
+ return 4;
+}
+
static void mtk_ovl_layer_on(struct mtk_ddp_comp *comp, unsigned int idx)
{
unsigned int reg;
static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)
{
+ /* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX"
+ * is defined in mediatek HW data sheet.
+ * The alphabet order in XXX is no relation to data
+ * arrangement in memory.
+ */
switch (fmt) {
default:
case DRM_FORMAT_RGB565:
.stop = mtk_ovl_stop,
.enable_vblank = mtk_ovl_enable_vblank,
.disable_vblank = mtk_ovl_disable_vblank,
+ .layer_nr = mtk_ovl_layer_nr,
.layer_on = mtk_ovl_layer_on,
.layer_off = mtk_ovl_layer_off,
.layer_config = mtk_ovl_layer_config,
#define RDMA_REG_UPDATE_INT BIT(0)
#define DISP_REG_RDMA_GLOBAL_CON 0x0010
#define RDMA_ENGINE_EN BIT(0)
+#define RDMA_MODE_MEMORY BIT(1)
#define DISP_REG_RDMA_SIZE_CON_0 0x0014
+#define RDMA_MATRIX_ENABLE BIT(17)
+#define RDMA_MATRIX_INT_MTX_SEL GENMASK(23, 20)
+#define RDMA_MATRIX_INT_MTX_BT601_to_RGB (6 << 20)
#define DISP_REG_RDMA_SIZE_CON_1 0x0018
#define DISP_REG_RDMA_TARGET_LINE 0x001c
+#define DISP_RDMA_MEM_CON 0x0024
+#define MEM_MODE_INPUT_FORMAT_RGB565 (0x000 << 4)
+#define MEM_MODE_INPUT_FORMAT_RGB888 (0x001 << 4)
+#define MEM_MODE_INPUT_FORMAT_RGBA8888 (0x002 << 4)
+#define MEM_MODE_INPUT_FORMAT_ARGB8888 (0x003 << 4)
+#define MEM_MODE_INPUT_FORMAT_UYVY (0x004 << 4)
+#define MEM_MODE_INPUT_FORMAT_YUYV (0x005 << 4)
+#define MEM_MODE_INPUT_SWAP BIT(8)
+#define DISP_RDMA_MEM_SRC_PITCH 0x002c
+#define DISP_RDMA_MEM_GMC_SETTING_0 0x0030
#define DISP_REG_RDMA_FIFO_CON 0x0040
#define RDMA_FIFO_UNDERFLOW_EN BIT(31)
#define RDMA_FIFO_PSEUDO_SIZE(bytes) (((bytes) / 16) << 16)
#define RDMA_OUTPUT_VALID_FIFO_THRESHOLD(bytes) ((bytes) / 16)
#define RDMA_FIFO_SIZE(rdma) ((rdma)->data->fifo_size)
+#define DISP_RDMA_MEM_START_ADDR 0x0f00
+
+#define RDMA_MEM_GMC 0x40402020
struct mtk_disp_rdma_data {
unsigned int fifo_size;
writel(reg, comp->regs + DISP_REG_RDMA_FIFO_CON);
}
+static unsigned int rdma_fmt_convert(struct mtk_disp_rdma *rdma,
+ unsigned int fmt)
+{
+ /* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX"
+ * is defined in mediatek HW data sheet.
+ * The alphabet order in XXX is no relation to data
+ * arrangement in memory.
+ */
+ switch (fmt) {
+ default:
+ case DRM_FORMAT_RGB565:
+ return MEM_MODE_INPUT_FORMAT_RGB565;
+ case DRM_FORMAT_BGR565:
+ return MEM_MODE_INPUT_FORMAT_RGB565 | MEM_MODE_INPUT_SWAP;
+ case DRM_FORMAT_RGB888:
+ return MEM_MODE_INPUT_FORMAT_RGB888;
+ case DRM_FORMAT_BGR888:
+ return MEM_MODE_INPUT_FORMAT_RGB888 | MEM_MODE_INPUT_SWAP;
+ case DRM_FORMAT_RGBX8888:
+ case DRM_FORMAT_RGBA8888:
+ return MEM_MODE_INPUT_FORMAT_ARGB8888;
+ case DRM_FORMAT_BGRX8888:
+ case DRM_FORMAT_BGRA8888:
+ return MEM_MODE_INPUT_FORMAT_ARGB8888 | MEM_MODE_INPUT_SWAP;
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ARGB8888:
+ return MEM_MODE_INPUT_FORMAT_RGBA8888;
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_ABGR8888:
+ return MEM_MODE_INPUT_FORMAT_RGBA8888 | MEM_MODE_INPUT_SWAP;
+ case DRM_FORMAT_UYVY:
+ return MEM_MODE_INPUT_FORMAT_UYVY;
+ case DRM_FORMAT_YUYV:
+ return MEM_MODE_INPUT_FORMAT_YUYV;
+ }
+}
+
+static unsigned int mtk_rdma_layer_nr(struct mtk_ddp_comp *comp)
+{
+ return 1;
+}
+
+static void mtk_rdma_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
+ struct mtk_plane_state *state)
+{
+ struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
+ struct mtk_plane_pending_state *pending = &state->pending;
+ unsigned int addr = pending->addr;
+ unsigned int pitch = pending->pitch & 0xffff;
+ unsigned int fmt = pending->format;
+ unsigned int con;
+
+ con = rdma_fmt_convert(rdma, fmt);
+ writel_relaxed(con, comp->regs + DISP_RDMA_MEM_CON);
+
+ if (fmt == DRM_FORMAT_UYVY || fmt == DRM_FORMAT_YUYV) {
+ rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0,
+ RDMA_MATRIX_ENABLE, RDMA_MATRIX_ENABLE);
+ rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0,
+ RDMA_MATRIX_INT_MTX_SEL,
+ RDMA_MATRIX_INT_MTX_BT601_to_RGB);
+ } else {
+ rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0,
+ RDMA_MATRIX_ENABLE, 0);
+ }
+
+ writel_relaxed(addr, comp->regs + DISP_RDMA_MEM_START_ADDR);
+ writel_relaxed(pitch, comp->regs + DISP_RDMA_MEM_SRC_PITCH);
+ writel(RDMA_MEM_GMC, comp->regs + DISP_RDMA_MEM_GMC_SETTING_0);
+ rdma_update_bits(comp, DISP_REG_RDMA_GLOBAL_CON,
+ RDMA_MODE_MEMORY, RDMA_MODE_MEMORY);
+}
+
static const struct mtk_ddp_comp_funcs mtk_disp_rdma_funcs = {
.config = mtk_rdma_config,
.start = mtk_rdma_start,
.stop = mtk_rdma_stop,
.enable_vblank = mtk_rdma_enable_vblank,
.disable_vblank = mtk_rdma_disable_vblank,
+ .layer_nr = mtk_rdma_layer_nr,
+ .layer_config = mtk_rdma_layer_config,
};
static int mtk_disp_rdma_bind(struct device *dev, struct device *master,
bool pending_needs_vblank;
struct drm_pending_vblank_event *event;
- struct drm_plane planes[OVL_LAYER_NR];
+ struct drm_plane *planes;
+ unsigned int layer_nr;
bool pending_planes;
void __iomem *config_regs;
static int mtk_drm_crtc_enable_vblank(struct drm_crtc *crtc)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
- mtk_ddp_comp_enable_vblank(ovl, &mtk_crtc->base);
+ mtk_ddp_comp_enable_vblank(comp, &mtk_crtc->base);
return 0;
}
static void mtk_drm_crtc_disable_vblank(struct drm_crtc *crtc)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
- mtk_ddp_comp_disable_vblank(ovl);
+ mtk_ddp_comp_disable_vblank(comp);
}
static int mtk_crtc_ddp_clk_enable(struct mtk_drm_crtc *mtk_crtc)
}
/* Initially configure all planes */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
- struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
unsigned int i;
/*
* queue update module registers on vblank.
*/
if (state->pending_config) {
- mtk_ddp_comp_config(ovl, state->pending_width,
+ mtk_ddp_comp_config(comp, state->pending_width,
state->pending_height,
state->pending_vrefresh, 0);
}
if (mtk_crtc->pending_planes) {
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
plane_state = to_mtk_plane_state(plane->state);
if (plane_state->pending.config) {
- mtk_ddp_comp_layer_config(ovl, i, plane_state);
+ mtk_ddp_comp_layer_config(comp, i, plane_state);
plane_state->pending.config = false;
}
}
struct drm_crtc_state *old_state)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
int ret;
DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
- ret = mtk_smi_larb_get(ovl->larb_dev);
+ ret = mtk_smi_larb_get(comp->larb_dev);
if (ret) {
DRM_ERROR("Failed to get larb: %d\n", ret);
return;
ret = mtk_crtc_ddp_hw_init(mtk_crtc);
if (ret) {
- mtk_smi_larb_put(ovl->larb_dev);
+ mtk_smi_larb_put(comp->larb_dev);
return;
}
struct drm_crtc_state *old_state)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
int i;
DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
return;
/* Set all pending plane state to disabled */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
drm_crtc_vblank_off(crtc);
mtk_crtc_ddp_hw_fini(mtk_crtc);
- mtk_smi_larb_put(ovl->larb_dev);
+ mtk_smi_larb_put(comp->larb_dev);
mtk_crtc->enabled = false;
}
if (mtk_crtc->event)
mtk_crtc->pending_needs_vblank = true;
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;
return ret;
}
-void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl)
+void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_drm_private *priv = crtc->dev->dev_private;
mtk_crtc->ddp_comp[i] = comp;
}
- for (zpos = 0; zpos < OVL_LAYER_NR; zpos++) {
+ mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
+ mtk_crtc->planes = devm_kzalloc(dev, mtk_crtc->layer_nr *
+ sizeof(struct drm_plane),
+ GFP_KERNEL);
+
+ for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
DRM_PLANE_TYPE_OVERLAY;
}
ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
- &mtk_crtc->planes[1], pipe);
+ mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
+ NULL, pipe);
if (ret < 0)
goto unprepare;
drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
#include "mtk_drm_ddp_comp.h"
#include "mtk_drm_plane.h"
-#define OVL_LAYER_NR 4
#define MTK_LUT_SIZE 512
#define MTK_MAX_BPC 10
#define MTK_MIN_BPC 3
void mtk_drm_crtc_commit(struct drm_crtc *crtc);
-void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl);
+void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp);
int mtk_drm_crtc_create(struct drm_device *drm_dev,
const enum mtk_ddp_comp_id *path,
unsigned int path_len);
#define OVL1_MOUT_EN_COLOR1 0x1
#define GAMMA_MOUT_EN_RDMA1 0x1
#define RDMA0_SOUT_DPI0 0x2
+#define RDMA0_SOUT_DPI1 0x3
+#define RDMA0_SOUT_DSI1 0x1
#define RDMA0_SOUT_DSI2 0x4
#define RDMA0_SOUT_DSI3 0x5
#define RDMA1_SOUT_DPI0 0x2
#define DPI0_SEL_IN_RDMA2 0x3
#define DPI1_SEL_IN_RDMA1 (0x1 << 8)
#define DPI1_SEL_IN_RDMA2 (0x3 << 8)
+#define DSI0_SEL_IN_RDMA1 0x1
+#define DSI0_SEL_IN_RDMA2 0x4
#define DSI1_SEL_IN_RDMA1 0x1
#define DSI1_SEL_IN_RDMA2 0x4
#define DSI2_SEL_IN_RDMA1 (0x1 << 16)
} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
value = RDMA0_SOUT_DPI0;
+ } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI1) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+ value = RDMA0_SOUT_DPI1;
+ } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI1) {
+ *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
+ value = RDMA0_SOUT_DSI1;
} else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
*addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
value = RDMA0_SOUT_DSI2;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
*addr = DISP_REG_CONFIG_DPI_SEL_IN;
value = DPI1_SEL_IN_RDMA1;
+ } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
+ *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+ value = DSI0_SEL_IN_RDMA1;
} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
*addr = DISP_REG_CONFIG_DSIO_SEL_IN;
value = DSI1_SEL_IN_RDMA1;
} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
*addr = DISP_REG_CONFIG_DPI_SEL_IN;
value = DPI1_SEL_IN_RDMA2;
- } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
+ } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI0) {
*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
+ value = DSI0_SEL_IN_RDMA2;
+ } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
+ *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
value = DSI1_SEL_IN_RDMA2;
} else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
*addr = DISP_REG_CONFIG_DSIE_SEL_IN;
void (*stop)(struct mtk_ddp_comp *comp);
void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
void (*disable_vblank)(struct mtk_ddp_comp *comp);
+ unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
void (*layer_config)(struct mtk_ddp_comp *comp, unsigned int idx,
comp->funcs->disable_vblank(comp);
}
+static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
+{
+ if (comp->funcs && comp->funcs->layer_nr)
+ return comp->funcs->layer_nr(comp);
+
+ return 0;
+}
+
static inline void mtk_ddp_comp_layer_on(struct mtk_ddp_comp *comp,
unsigned int idx)
{
err_deinit:
mtk_drm_kms_deinit(drm);
err_free:
- drm_dev_unref(drm);
+ drm_dev_put(drm);
return ret;
}
struct mtk_drm_private *private = dev_get_drvdata(dev);
drm_dev_unregister(private->drm);
- drm_dev_unref(private->drm);
+ drm_dev_put(private->drm);
private->drm = NULL;
}
drm_dev_unregister(drm);
mtk_drm_kms_deinit(drm);
- drm_dev_unref(drm);
+ drm_dev_put(drm);
component_master_del(&pdev->dev, &mtk_drm_ops);
pm_runtime_disable(&pdev->dev);
{
struct mtk_drm_private *private = dev_get_drvdata(dev);
struct drm_device *drm = private->drm;
+ int ret;
- drm_kms_helper_poll_disable(drm);
-
- private->suspend_state = drm_atomic_helper_suspend(drm);
- if (IS_ERR(private->suspend_state)) {
- drm_kms_helper_poll_enable(drm);
- return PTR_ERR(private->suspend_state);
- }
-
+ ret = drm_mode_config_helper_suspend(drm);
DRM_DEBUG_DRIVER("mtk_drm_sys_suspend\n");
- return 0;
+
+ return ret;
}
static int mtk_drm_sys_resume(struct device *dev)
{
struct mtk_drm_private *private = dev_get_drvdata(dev);
struct drm_device *drm = private->drm;
+ int ret;
- drm_atomic_helper_resume(drm, private->suspend_state);
- drm_kms_helper_poll_enable(drm);
-
+ ret = drm_mode_config_helper_resume(drm);
DRM_DEBUG_DRIVER("mtk_drm_sys_resume\n");
- return 0;
+
+ return ret;
}
#endif
return clamp_val(reg, 0, 1023) & (0xff << 2);
}
-static u16 adt7475_read_word(struct i2c_client *client, int reg)
+static int adt7475_read_word(struct i2c_client *client, int reg)
{
- u16 val;
+ int val1, val2;
- val = i2c_smbus_read_byte_data(client, reg);
- val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+ val1 = i2c_smbus_read_byte_data(client, reg);
+ if (val1 < 0)
+ return val1;
+ val2 = i2c_smbus_read_byte_data(client, reg + 1);
+ if (val2 < 0)
+ return val2;
- return val;
+ return val1 | (val2 << 8);
}
static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
{
struct adt7475_data *data = adt7475_update_device(dev);
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- int i = clamp_val(data->range[sattr->index] & 0xf, 0,
- ARRAY_SIZE(pwmfreq_table) - 1);
+ int idx;
if (IS_ERR(data))
return PTR_ERR(data);
+ idx = clamp_val(data->range[sattr->index] & 0xf, 0,
+ ARRAY_SIZE(pwmfreq_table) - 1);
- return sprintf(buf, "%d\n", pwmfreq_table[i]);
+ return sprintf(buf, "%d\n", pwmfreq_table[idx]);
}
static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct adt7475_data *data = adt7475_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
}
* Bi-directional Current/Power Monitor with I2C Interface
* Datasheet: http://www.ti.com/product/ina230
*
- * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
* Thanks to Jan Volkering
*
* This program is free software; you can redistribute it and/or modify
return 0;
}
+static ssize_t ina2xx_show_shunt(struct device *dev,
+ struct device_attribute *da,
+ char *buf)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%li\n", data->rshunt);
+}
+
static ssize_t ina2xx_store_shunt(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
/* shunt resistance */
static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
- ina2xx_show_value, ina2xx_store_shunt,
+ ina2xx_show_shunt, ina2xx_store_shunt,
INA2XX_CALIBRATION);
/* update interval (ina226 only) */
#include <linux/bitops.h>
#include <linux/dmi.h>
#include <linux/io.h>
+#include <linux/nospec.h>
#include "lm75.h"
#define USE_ALTERNATE
return err;
if (val > NUM_TEMP)
return -EINVAL;
+ val = array_index_nospec(val, NUM_TEMP + 1);
if (val && (!(data->have_temp & BIT(val - 1)) ||
!data->temp_src[val - 1]))
return -EINVAL;
}
#ifdef DEBUG
if (jiffies != start && i2c_debug >= 3)
- pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go "
- "high\n", jiffies - start);
+ pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go high\n",
+ jiffies - start);
#endif
done:
setsda(adap, sb);
udelay((adap->udelay + 1) / 2);
if (sclhi(adap) < 0) { /* timed out */
- bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
- "timeout at bit #%d\n", (int)c, i);
+ bit_dbg(1, &i2c_adap->dev,
+ "i2c_outb: 0x%02x, timeout at bit #%d\n",
+ (int)c, i);
return -ETIMEDOUT;
}
/* FIXME do arbitration here:
}
sdahi(adap);
if (sclhi(adap) < 0) { /* timeout */
- bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, "
- "timeout at ack\n", (int)c);
+ bit_dbg(1, &i2c_adap->dev,
+ "i2c_outb: 0x%02x, timeout at ack\n", (int)c);
return -ETIMEDOUT;
}
sdahi(adap);
for (i = 0; i < 8; i++) {
if (sclhi(adap) < 0) { /* timeout */
- bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit "
- "#%d\n", 7 - i);
+ bit_dbg(1, &i2c_adap->dev,
+ "i2c_inb: timeout at bit #%d\n",
+ 7 - i);
return -ETIMEDOUT;
}
indata *= 2;
goto bailout;
}
if (!scl) {
- printk(KERN_WARNING "%s: SCL unexpected low "
- "while pulling SDA low!\n", name);
+ printk(KERN_WARNING
+ "%s: SCL unexpected low while pulling SDA low!\n",
+ name);
goto bailout;
}
goto bailout;
}
if (!scl) {
- printk(KERN_WARNING "%s: SCL unexpected low "
- "while pulling SDA high!\n", name);
+ printk(KERN_WARNING
+ "%s: SCL unexpected low while pulling SDA high!\n",
+ name);
goto bailout;
}
goto bailout;
}
if (!sda) {
- printk(KERN_WARNING "%s: SDA unexpected low "
- "while pulling SCL low!\n", name);
+ printk(KERN_WARNING
+ "%s: SDA unexpected low while pulling SCL low!\n",
+ name);
goto bailout;
}
goto bailout;
}
if (!sda) {
- printk(KERN_WARNING "%s: SDA unexpected low "
- "while pulling SCL high!\n", name);
+ printk(KERN_WARNING
+ "%s: SDA unexpected low while pulling SCL high!\n",
+ name);
goto bailout;
}
i2c_start(adap);
}
if (i && ret)
- bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at "
- "0x%02x: %s\n", i + 1,
+ bit_dbg(1, &i2c_adap->dev,
+ "Used %d tries to %s client at 0x%02x: %s\n", i + 1,
addr & 1 ? "read from" : "write to", addr >> 1,
ret == 1 ? "success" : "failed, timeout?");
return ret;
if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
if (!(flags & I2C_M_NO_RD_ACK))
acknak(i2c_adap, 0);
- dev_err(&i2c_adap->dev, "readbytes: invalid "
- "block length (%d)\n", inval);
+ dev_err(&i2c_adap->dev,
+ "readbytes: invalid block length (%d)\n",
+ inval);
return -EPROTO;
}
/* The original count value accounts for the extra
return -ENXIO;
}
if (flags & I2C_M_RD) {
- bit_dbg(3, &i2c_adap->dev, "emitting repeated "
- "start condition\n");
+ bit_dbg(3, &i2c_adap->dev,
+ "emitting repeated start condition\n");
i2c_repstart(adap);
/* okay, now switch into reading mode */
addr |= 0x01;
}
ret = bit_doAddress(i2c_adap, pmsg);
if ((ret != 0) && !nak_ok) {
- bit_dbg(1, &i2c_adap->dev, "NAK from "
- "device addr 0x%02x msg #%d\n",
+ bit_dbg(1, &i2c_adap->dev,
+ "NAK from device addr 0x%02x msg #%d\n",
msgs[i].addr, i);
goto bailout;
}
i2c_set_adapdata(adap, dev);
if (dev->pm_disabled) {
- dev_pm_syscore_device(dev->dev, true);
irq_flags = IRQF_NO_SUSPEND;
} else {
irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+ if (i_dev->pm_disabled)
+ return 0;
+
i_dev->disable(i_dev);
i2c_dw_prepare_clk(i_dev, false);
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- i2c_dw_prepare_clk(i_dev, true);
+ if (!i_dev->pm_disabled)
+ i2c_dw_prepare_clk(i_dev, true);
+
i_dev->init(i_dev);
return 0;
}
#ifdef CONFIG_ACPI
+static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
+ acpi_physical_address address)
+{
+ return address >= priv->smba &&
+ address <= pci_resource_end(priv->pci_dev, SMBBAR);
+}
+
static acpi_status
i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
u64 *value, void *handler_context, void *region_context)
*/
mutex_lock(&priv->acpi_lock);
- if (!priv->acpi_reserved) {
+ if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
priv->acpi_reserved = true;
dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
pd->pos = pd->msg->len;
pd->stop_after_dma = true;
- i2c_release_dma_safe_msg_buf(pd->msg, pd->dma_buf);
-
iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
}
dma_async_issue_pending(chan);
}
-static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
- bool do_init)
+static void start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
+ bool do_init)
{
if (do_init) {
/* Initialize channel registers */
/* Enable all interrupts to begin with */
iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
- return 0;
}
static int poll_dte(struct sh_mobile_i2c_data *pd)
pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
pd->stop_after_dma = false;
- err = start_ch(pd, msg, do_start);
- if (err)
- break;
+ start_ch(pd, msg, do_start);
if (do_start)
i2c_op(pd, OP_START, 0);
timeout = wait_event_timeout(pd->wait,
pd->sr & (ICSR_TACK | SW_DONE),
adapter->timeout);
+
+ /* 'stop_after_dma' tells if DMA transfer was complete */
+ i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, pd->stop_after_dma);
+
if (!timeout) {
dev_err(pd->dev, "Transfer request timed out\n");
if (pd->dma_direction != DMA_NONE)
EXPORT_SYMBOL_GPL(i2c_get_dma_safe_msg_buf);
/**
- * i2c_release_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg
- * @msg: the message to be synced with
+ * i2c_put_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg
* @buf: the buffer obtained from i2c_get_dma_safe_msg_buf(). May be NULL.
+ * @msg: the message which the buffer corresponds to
+ * @xferred: bool saying if the message was transferred
*/
-void i2c_release_dma_safe_msg_buf(struct i2c_msg *msg, u8 *buf)
+void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred)
{
if (!buf || buf == msg->buf)
return;
- if (msg->flags & I2C_M_RD)
+ if (xferred && msg->flags & I2C_M_RD)
memcpy(msg->buf, buf, msg->len);
kfree(buf);
}
-EXPORT_SYMBOL_GPL(i2c_release_dma_safe_msg_buf);
+EXPORT_SYMBOL_GPL(i2c_put_dma_safe_msg_buf);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
mmc_exit_request(mq->queue, req);
}
-/*
- * We use BLK_MQ_F_BLOCKING and have only 1 hardware queue, which means requests
- * will not be dispatched in parallel.
- */
static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
spin_lock_irq(q->queue_lock);
- if (mq->recovery_needed) {
+ if (mq->recovery_needed || mq->busy) {
spin_unlock_irq(q->queue_lock);
return BLK_STS_RESOURCE;
}
break;
}
+ /* Parallel dispatch of requests is not supported at the moment */
+ mq->busy = true;
+
mq->in_flight[issue_type] += 1;
get_card = (mmc_tot_in_flight(mq) == 1);
cqe_retune_ok = (mmc_cqe_qcnt(mq) == 1);
mq->in_flight[issue_type] -= 1;
if (mmc_tot_in_flight(mq) == 0)
put_card = true;
+ mq->busy = false;
spin_unlock_irq(q->queue_lock);
if (put_card)
mmc_put_card(card, &mq->ctx);
+ } else {
+ WRITE_ONCE(mq->busy, false);
}
return ret;
unsigned int cqe_busy;
#define MMC_CQE_DCMD_BUSY BIT(0)
#define MMC_CQE_QUEUE_FULL BIT(1)
+ bool busy;
bool use_cqe;
bool recovery_needed;
bool in_recovery;
* We don't really have DMA, so we need
* to copy from our platform driver buffer
*/
- sg_copy_to_buffer(data->sg, 1, host->virt_base,
+ sg_copy_from_buffer(data->sg, 1, host->virt_base,
data->sg->length);
}
host->data->bytes_xfered += data->sg->length;
* We don't really have DMA, so we need to copy to our
* platform driver buffer
*/
- sg_copy_from_buffer(data->sg, 1, host->virt_base,
+ sg_copy_to_buffer(data->sg, 1, host->virt_base,
data->sg->length);
}
}
do {
value = atmci_readl(host, ATMCI_RDR);
if (likely(offset + 4 <= sg->length)) {
- sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset);
+ sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset);
offset += 4;
nbytes += 4;
} else {
unsigned int remaining = sg->length - offset;
- sg_pcopy_to_buffer(sg, 1, &value, remaining, offset);
+ sg_pcopy_from_buffer(sg, 1, &value, remaining, offset);
nbytes += remaining;
flush_dcache_page(sg_page(sg));
goto done;
offset = 4 - remaining;
- sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining,
+ sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining,
offset, 0);
nbytes += offset;
}
do {
if (likely(offset + 4 <= sg->length)) {
- sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset);
+ sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset);
atmci_writel(host, ATMCI_TDR, value);
offset += 4;
unsigned int remaining = sg->length - offset;
value = 0;
- sg_pcopy_from_buffer(sg, 1, &value, remaining, offset);
+ sg_pcopy_to_buffer(sg, 1, &value, remaining, offset);
nbytes += remaining;
host->sg = sg = sg_next(sg);
}
offset = 4 - remaining;
- sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining,
+ sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining,
offset, 0);
atmci_writel(host, ATMCI_TDR, value);
nbytes += offset;
/* DM_CM_RST */
#define RST_DTRANRST1 BIT(9)
#define RST_DTRANRST0 BIT(8)
-#define RST_RESERVED_BITS GENMASK_ULL(32, 0)
+#define RST_RESERVED_BITS GENMASK_ULL(31, 0)
/* DM_CM_INFO1 and DM_CM_INFO1_MASK */
#define INFO1_CLEAR 0
+#define INFO1_MASK_CLEAR GENMASK_ULL(31, 0)
#define INFO1_DTRANEND1 BIT(17)
#define INFO1_DTRANEND0 BIT(16)
/* DM_CM_INFO2 and DM_CM_INFO2_MASK */
+#define INFO2_MASK_CLEAR GENMASK_ULL(31, 0)
#define INFO2_DTRANERR1 BIT(17)
#define INFO2_DTRANERR0 BIT(16)
{
struct renesas_sdhi *priv = host_to_priv(host);
+ /* Disable DMAC interrupts, we don't use them */
+ renesas_sdhi_internal_dmac_dm_write(host, DM_CM_INFO1_MASK,
+ INFO1_MASK_CLEAR);
+ renesas_sdhi_internal_dmac_dm_write(host, DM_CM_INFO2_MASK,
+ INFO2_MASK_CLEAR);
+
/* Each value is set to non-zero to assume "enabling" each DMA */
host->chan_rx = host->chan_tx = (void *)0xdeadbeaf;
denali_enable_irq(denali);
denali_reset_banks(denali);
+ if (!denali->max_banks) {
+ /* Error out earlier if no chip is found for some reasons. */
+ ret = -ENODEV;
+ goto disable_irq;
+ }
denali->active_bank = DENALI_INVALID_BANK;
return 0;
}
-static void __init init_mtd_structs(struct mtd_info *mtd)
+static void init_mtd_structs(struct mtd_info *mtd)
{
/* initialize mtd and nand data structures */
}
-static int __init read_id_reg(struct mtd_info *mtd)
+static int read_id_reg(struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct docg4_priv *doc = nand_get_controller_data(nand);
struct tcf_exts *tc_exts)
{
const struct tc_action *tc_act;
- LIST_HEAD(tc_actions);
- int rc;
+ int i, rc;
if (!tcf_exts_has_actions(tc_exts)) {
netdev_info(bp->dev, "no actions");
return -EINVAL;
}
- tcf_exts_to_list(tc_exts, &tc_actions);
- list_for_each_entry(tc_act, &tc_actions, list) {
+ tcf_exts_for_each_action(i, tc_act, tc_exts) {
/* Drop action */
if (is_tcf_gact_shot(tc_act)) {
actions->flags |= BNXT_TC_ACTION_FLAG_DROP;
if (np) {
if (of_phy_is_fixed_link(np)) {
- if (of_phy_register_fixed_link(np) < 0) {
- dev_err(&bp->pdev->dev,
- "broken fixed-link specification\n");
- return -ENODEV;
- }
bp->phy_node = of_node_get(np);
} else {
bp->phy_node = of_parse_phandle(np, "phy-handle", 0);
{
struct macb_platform_data *pdata;
struct device_node *np;
- int err;
+ int err = -ENXIO;
/* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
np = bp->pdev->dev.of_node;
- if (pdata)
- bp->mii_bus->phy_mask = pdata->phy_mask;
+ if (np && of_phy_is_fixed_link(np)) {
+ if (of_phy_register_fixed_link(np) < 0) {
+ dev_err(&bp->pdev->dev,
+ "broken fixed-link specification %pOF\n", np);
+ goto err_out_free_mdiobus;
+ }
+
+ err = mdiobus_register(bp->mii_bus);
+ } else {
+ if (pdata)
+ bp->mii_bus->phy_mask = pdata->phy_mask;
+
+ err = of_mdiobus_register(bp->mii_bus, np);
+ }
- err = of_mdiobus_register(bp->mii_bus, np);
if (err)
- goto err_out_free_mdiobus;
+ goto err_out_free_fixed_link;
err = macb_mii_probe(bp->dev);
if (err)
err_out_unregister_bus:
mdiobus_unregister(bp->mii_bus);
+err_out_free_fixed_link:
if (np && of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
err_out_free_mdiobus:
{
struct macb_queue *queue;
unsigned int q;
+ u32 ctrl = macb_readl(bp, NCR);
/* Disable RX and TX (XXX: Should we halt the transmission
* more gracefully?)
*/
- macb_writel(bp, NCR, 0);
+ ctrl &= ~(MACB_BIT(RE) | MACB_BIT(TE));
/* Clear the stats registers (XXX: Update stats first?) */
- macb_writel(bp, NCR, MACB_BIT(CLRSTAT));
+ ctrl |= MACB_BIT(CLRSTAT);
+
+ macb_writel(bp, NCR, ctrl);
/* Clear all status flags */
macb_writel(bp, TSR, -1);
}
/* Enable TX and RX */
- macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
+ macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE) | MACB_BIT(TE));
}
/* The hash address register is 64 bits long and takes up two
struct ch_filter_specification *fs)
{
const struct tc_action *a;
- LIST_HEAD(actions);
+ int i;
- tcf_exts_to_list(cls->exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, cls->exts) {
if (is_tcf_gact_ok(a)) {
fs->action = FILTER_PASS;
} else if (is_tcf_gact_shot(a)) {
bool act_redir = false;
bool act_pedit = false;
bool act_vlan = false;
- LIST_HEAD(actions);
+ int i;
- tcf_exts_to_list(cls->exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, cls->exts) {
if (is_tcf_gact_ok(a)) {
/* Do nothing */
} else if (is_tcf_gact_shot(a)) {
unsigned int num_actions = 0;
const struct tc_action *a;
struct tcf_exts *exts;
- LIST_HEAD(actions);
+ int i;
exts = cls->knode.exts;
if (!tcf_exts_has_actions(exts))
return -EINVAL;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
/* Don't allow more than one action per rule. */
if (num_actions)
return -EINVAL;
/* priv data for the desc, e.g. skb when use with ip stack*/
void *priv;
- u16 page_offset;
- u16 reuse_flag;
+ u32 page_offset;
+ u32 length; /* length of the buffer */
- u16 length; /* length of the buffer */
+ u16 reuse_flag;
/* desc type, used by the ring user to mark the type of the priv data */
u16 type;
return NETDEV_TX_BUSY;
}
-/**
- * hns_nic_get_headlen - determine size of header for RSC/LRO/GRO/FCOE
- * @data: pointer to the start of the headers
- * @max: total length of section to find headers in
- *
- * This function is meant to determine the length of headers that will
- * be recognized by hardware for LRO, GRO, and RSC offloads. The main
- * motivation of doing this is to only perform one pull for IPv4 TCP
- * packets so that we can do basic things like calculating the gso_size
- * based on the average data per packet.
- **/
-static unsigned int hns_nic_get_headlen(unsigned char *data, u32 flag,
- unsigned int max_size)
-{
- unsigned char *network;
- u8 hlen;
-
- /* this should never happen, but better safe than sorry */
- if (max_size < ETH_HLEN)
- return max_size;
-
- /* initialize network frame pointer */
- network = data;
-
- /* set first protocol and move network header forward */
- network += ETH_HLEN;
-
- /* handle any vlan tag if present */
- if (hnae_get_field(flag, HNS_RXD_VLAN_M, HNS_RXD_VLAN_S)
- == HNS_RX_FLAG_VLAN_PRESENT) {
- if ((typeof(max_size))(network - data) > (max_size - VLAN_HLEN))
- return max_size;
-
- network += VLAN_HLEN;
- }
-
- /* handle L3 protocols */
- if (hnae_get_field(flag, HNS_RXD_L3ID_M, HNS_RXD_L3ID_S)
- == HNS_RX_FLAG_L3ID_IPV4) {
- if ((typeof(max_size))(network - data) >
- (max_size - sizeof(struct iphdr)))
- return max_size;
-
- /* access ihl as a u8 to avoid unaligned access on ia64 */
- hlen = (network[0] & 0x0F) << 2;
-
- /* verify hlen meets minimum size requirements */
- if (hlen < sizeof(struct iphdr))
- return network - data;
-
- /* record next protocol if header is present */
- } else if (hnae_get_field(flag, HNS_RXD_L3ID_M, HNS_RXD_L3ID_S)
- == HNS_RX_FLAG_L3ID_IPV6) {
- if ((typeof(max_size))(network - data) >
- (max_size - sizeof(struct ipv6hdr)))
- return max_size;
-
- /* record next protocol */
- hlen = sizeof(struct ipv6hdr);
- } else {
- return network - data;
- }
-
- /* relocate pointer to start of L4 header */
- network += hlen;
-
- /* finally sort out TCP/UDP */
- if (hnae_get_field(flag, HNS_RXD_L4ID_M, HNS_RXD_L4ID_S)
- == HNS_RX_FLAG_L4ID_TCP) {
- if ((typeof(max_size))(network - data) >
- (max_size - sizeof(struct tcphdr)))
- return max_size;
-
- /* access doff as a u8 to avoid unaligned access on ia64 */
- hlen = (network[12] & 0xF0) >> 2;
-
- /* verify hlen meets minimum size requirements */
- if (hlen < sizeof(struct tcphdr))
- return network - data;
-
- network += hlen;
- } else if (hnae_get_field(flag, HNS_RXD_L4ID_M, HNS_RXD_L4ID_S)
- == HNS_RX_FLAG_L4ID_UDP) {
- if ((typeof(max_size))(network - data) >
- (max_size - sizeof(struct udphdr)))
- return max_size;
-
- network += sizeof(struct udphdr);
- }
-
- /* If everything has gone correctly network should be the
- * data section of the packet and will be the end of the header.
- * If not then it probably represents the end of the last recognized
- * header.
- */
- if ((typeof(max_size))(network - data) < max_size)
- return network - data;
- else
- return max_size;
-}
-
static void hns_nic_reuse_page(struct sk_buff *skb, int i,
struct hnae_ring *ring, int pull_len,
struct hnae_desc_cb *desc_cb)
{
struct hnae_desc *desc;
- int truesize, size;
+ u32 truesize;
+ int size;
int last_offset;
bool twobufs;
}
skb_add_rx_frag(skb, i, desc_cb->priv, desc_cb->page_offset + pull_len,
- size - pull_len, truesize - pull_len);
+ size - pull_len, truesize);
/* avoid re-using remote pages,flag default unreuse */
if (unlikely(page_to_nid(desc_cb->priv) != numa_node_id()))
} else {
ring->stats.seg_pkt_cnt++;
- pull_len = hns_nic_get_headlen(va, bnum_flag, HNS_RX_HEAD_SIZE);
+ pull_len = eth_get_headlen(va, HNS_RX_HEAD_SIZE);
memcpy(__skb_put(skb, pull_len), va,
ALIGN(pull_len, sizeof(long)));
struct hns3_desc_cb *desc_cb)
{
struct hns3_desc *desc;
- int truesize, size;
+ u32 truesize;
+ int size;
int last_offset;
bool twobufs;
/* priv data for the desc, e.g. skb when use with ip stack*/
void *priv;
- u16 page_offset;
- u16 reuse_flag;
-
+ u32 page_offset;
u32 length; /* length of the buffer */
+ u16 reuse_flag;
+
/* desc type, used by the ring user to mark the type of the priv data */
u16 type;
};
adapter->tx_ring = tx_old;
e1000_free_all_rx_resources(adapter);
e1000_free_all_tx_resources(adapter);
- kfree(tx_old);
- kfree(rx_old);
adapter->rx_ring = rxdr;
adapter->tx_ring = txdr;
err = e1000_up(adapter);
if (err)
goto err_setup;
}
+ kfree(tx_old);
+ kfree(rx_old);
clear_bit(__E1000_RESETTING, &adapter->flags);
return 0;
err_alloc_rx:
kfree(txdr);
err_alloc_tx:
- e1000_up(adapter);
+ if (netif_running(adapter->netdev))
+ e1000_up(adapter);
err_setup:
clear_bit(__E1000_RESETTING, &adapter->flags);
return err;
for (i = 0; i < I40E_MAX_USER_PRIORITY; i++)
i40e_add_stat_strings(&data, i40e_gstrings_pfc_stats, i);
- WARN_ONCE(p - data != i40e_get_stats_count(netdev) * ETH_GSTRING_LEN,
+ WARN_ONCE(data - p != i40e_get_stats_count(netdev) * ETH_GSTRING_LEN,
"stat strings count mismatch!");
}
u8 *bw_share)
{
struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
+ struct i40e_pf *pf = vsi->back;
i40e_status ret;
int i;
- if (vsi->back->flags & I40E_FLAG_TC_MQPRIO)
+ /* There is no need to reset BW when mqprio mode is on. */
+ if (pf->flags & I40E_FLAG_TC_MQPRIO)
return 0;
- if (!vsi->mqprio_qopt.qopt.hw) {
+ if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
if (ret)
- dev_info(&vsi->back->pdev->dev,
+ dev_info(&pf->pdev->dev,
"Failed to reset tx rate for vsi->seid %u\n",
vsi->seid);
return ret;
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
bw_data.tc_bw_credits[i] = bw_share[i];
- ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
- NULL);
+ ret = i40e_aq_config_vsi_tc_bw(&pf->hw, vsi->seid, &bw_data, NULL);
if (ret) {
- dev_info(&vsi->back->pdev->dev,
+ dev_info(&pf->pdev->dev,
"AQ command Config VSI BW allocation per TC failed = %d\n",
- vsi->back->hw.aq.asq_last_status);
+ pf->hw.aq.asq_last_status);
return -EINVAL;
}
#define ice_for_each_rxq(vsi, i) \
for ((i) = 0; (i) < (vsi)->num_rxq; (i)++)
+/* Macros for each allocated tx/rx ring whether used or not in a VSI */
+#define ice_for_each_alloc_txq(vsi, i) \
+ for ((i) = 0; (i) < (vsi)->alloc_txq; (i)++)
+
+#define ice_for_each_alloc_rxq(vsi, i) \
+ for ((i) = 0; (i) < (vsi)->alloc_rxq; (i)++)
+
struct ice_tc_info {
u16 qoffset;
u16 qcount;
struct list_head tmp_sync_list; /* MAC filters to be synced */
struct list_head tmp_unsync_list; /* MAC filters to be unsynced */
- bool irqs_ready;
- bool current_isup; /* Sync 'link up' logging */
- bool stat_offsets_loaded;
+ u8 irqs_ready;
+ u8 current_isup; /* Sync 'link up' logging */
+ u8 stat_offsets_loaded;
/* queue information */
u8 tx_mapping_mode; /* ICE_MAP_MODE_[CONTIG|SCATTER] */
struct ice_hw_port_stats stats;
struct ice_hw_port_stats stats_prev;
struct ice_hw hw;
- bool stat_prev_loaded; /* has previous stats been loaded */
+ u8 stat_prev_loaded; /* has previous stats been loaded */
char int_name[ICE_INT_NAME_STR_LEN];
};
/* VLAN section */
__le16 pvid; /* VLANS include priority bits */
u8 pvlan_reserved[2];
- u8 port_vlan_flags;
-#define ICE_AQ_VSI_PVLAN_MODE_S 0
-#define ICE_AQ_VSI_PVLAN_MODE_M (0x3 << ICE_AQ_VSI_PVLAN_MODE_S)
-#define ICE_AQ_VSI_PVLAN_MODE_UNTAGGED 0x1
-#define ICE_AQ_VSI_PVLAN_MODE_TAGGED 0x2
-#define ICE_AQ_VSI_PVLAN_MODE_ALL 0x3
+ u8 vlan_flags;
+#define ICE_AQ_VSI_VLAN_MODE_S 0
+#define ICE_AQ_VSI_VLAN_MODE_M (0x3 << ICE_AQ_VSI_VLAN_MODE_S)
+#define ICE_AQ_VSI_VLAN_MODE_UNTAGGED 0x1
+#define ICE_AQ_VSI_VLAN_MODE_TAGGED 0x2
+#define ICE_AQ_VSI_VLAN_MODE_ALL 0x3
#define ICE_AQ_VSI_PVLAN_INSERT_PVID BIT(2)
-#define ICE_AQ_VSI_PVLAN_EMOD_S 3
-#define ICE_AQ_VSI_PVLAN_EMOD_M (0x3 << ICE_AQ_VSI_PVLAN_EMOD_S)
-#define ICE_AQ_VSI_PVLAN_EMOD_STR_BOTH (0x0 << ICE_AQ_VSI_PVLAN_EMOD_S)
-#define ICE_AQ_VSI_PVLAN_EMOD_STR_UP (0x1 << ICE_AQ_VSI_PVLAN_EMOD_S)
-#define ICE_AQ_VSI_PVLAN_EMOD_STR (0x2 << ICE_AQ_VSI_PVLAN_EMOD_S)
-#define ICE_AQ_VSI_PVLAN_EMOD_NOTHING (0x3 << ICE_AQ_VSI_PVLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_S 3
+#define ICE_AQ_VSI_VLAN_EMOD_M (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_STR_BOTH (0x0 << ICE_AQ_VSI_VLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_STR_UP (0x1 << ICE_AQ_VSI_VLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_STR (0x2 << ICE_AQ_VSI_VLAN_EMOD_S)
+#define ICE_AQ_VSI_VLAN_EMOD_NOTHING (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
u8 pvlan_reserved2[3];
/* ingress egress up sections */
__le32 ingress_table; /* bitmap, 3 bits per up */
#define ICE_LG_ACT_GENERIC_OFFSET_M (0x7 << ICE_LG_ACT_GENERIC_OFFSET_S)
#define ICE_LG_ACT_GENERIC_PRIORITY_S 22
#define ICE_LG_ACT_GENERIC_PRIORITY_M (0x7 << ICE_LG_ACT_GENERIC_PRIORITY_S)
+#define ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX 7
/* Action = 7 - Set Stat count */
#define ICE_LG_ACT_STAT_COUNT 0x7
/**
* ice_clear_pf_cfg - Clear PF configuration
* @hw: pointer to the hardware structure
+ *
+ * Clears any existing PF configuration (VSIs, VSI lists, switch rules, port
+ * configuration, flow director filters, etc.).
*/
enum ice_status ice_clear_pf_cfg(struct ice_hw *hw)
{
struct ice_phy_info *phy_info;
enum ice_status status = 0;
- if (!pi)
+ if (!pi || !link_up)
return ICE_ERR_PARAM;
phy_info = &pi->phy;
}
/* LUT size is only valid for Global and PF table types */
- if (lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128) {
- flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG <<
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else if (lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512) {
+ switch (lut_size) {
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128:
+ break;
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512:
flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512_FLAG <<
ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else if ((lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K) &&
- (lut_type == ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_PF)) {
- flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K_FLAG <<
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else {
+ break;
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K:
+ if (lut_type == ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_PF) {
+ flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K_FLAG <<
+ ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
+ ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
+ break;
+ }
+ /* fall-through */
+ default:
status = ICE_ERR_PARAM;
goto ice_aq_get_set_rss_lut_exit;
}
return 0;
init_ctrlq_free_rq:
- ice_shutdown_rq(hw, cq);
- ice_shutdown_sq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- mutex_destroy(&cq->rq_lock);
+ if (cq->rq.head) {
+ ice_shutdown_rq(hw, cq);
+ mutex_destroy(&cq->rq_lock);
+ }
+ if (cq->sq.head) {
+ ice_shutdown_sq(hw, cq);
+ mutex_destroy(&cq->sq_lock);
+ }
return status;
}
return;
}
- ice_shutdown_sq(hw, cq);
- ice_shutdown_rq(hw, cq);
- mutex_destroy(&cq->sq_lock);
- mutex_destroy(&cq->rq_lock);
+ if (cq->sq.head) {
+ ice_shutdown_sq(hw, cq);
+ mutex_destroy(&cq->sq_lock);
+ }
+ if (cq->rq.head) {
+ ice_shutdown_rq(hw, cq);
+ mutex_destroy(&cq->rq_lock);
+ }
}
/**
clean_rq_elem_out:
/* Set pending if needed, unlock and return */
- if (pending)
+ if (pending) {
+ /* re-read HW head to calculate actual pending messages */
+ ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask);
*pending = (u16)((ntc > ntu ? cq->rq.count : 0) + (ntu - ntc));
+ }
clean_rq_elem_err:
mutex_unlock(&cq->rq_lock);
{
struct ice_netdev_priv *np = netdev_priv(netdev);
- return ((np->vsi->num_txq + np->vsi->num_rxq) *
+ return ((np->vsi->alloc_txq + np->vsi->alloc_rxq) *
(sizeof(struct ice_q_stats) / sizeof(u64)));
}
p += ETH_GSTRING_LEN;
}
- ice_for_each_txq(vsi, i) {
+ ice_for_each_alloc_txq(vsi, i) {
snprintf(p, ETH_GSTRING_LEN,
"tx-queue-%u.tx_packets", i);
p += ETH_GSTRING_LEN;
p += ETH_GSTRING_LEN;
}
- ice_for_each_rxq(vsi, i) {
+ ice_for_each_alloc_rxq(vsi, i) {
snprintf(p, ETH_GSTRING_LEN,
"rx-queue-%u.rx_packets", i);
p += ETH_GSTRING_LEN;
{
switch (sset) {
case ETH_SS_STATS:
+ /* The number (and order) of strings reported *must* remain
+ * constant for a given netdevice. This function must not
+ * report a different number based on run time parameters
+ * (such as the number of queues in use, or the setting of
+ * a private ethtool flag). This is due to the nature of the
+ * ethtool stats API.
+ *
+ * User space programs such as ethtool must make 3 separate
+ * ioctl requests, one for size, one for the strings, and
+ * finally one for the stats. Since these cross into
+ * user space, changes to the number or size could result in
+ * undefined memory access or incorrect string<->value
+ * correlations for statistics.
+ *
+ * Even if it appears to be safe, changes to the size or
+ * order of strings will suffer from race conditions and are
+ * not safe.
+ */
return ICE_ALL_STATS_LEN(netdev);
default:
return -EOPNOTSUPP;
/* populate per queue stats */
rcu_read_lock();
- ice_for_each_txq(vsi, j) {
+ ice_for_each_alloc_txq(vsi, j) {
ring = READ_ONCE(vsi->tx_rings[j]);
- if (!ring)
- continue;
- data[i++] = ring->stats.pkts;
- data[i++] = ring->stats.bytes;
+ if (ring) {
+ data[i++] = ring->stats.pkts;
+ data[i++] = ring->stats.bytes;
+ } else {
+ data[i++] = 0;
+ data[i++] = 0;
+ }
}
- ice_for_each_rxq(vsi, j) {
+ ice_for_each_alloc_rxq(vsi, j) {
ring = READ_ONCE(vsi->rx_rings[j]);
- data[i++] = ring->stats.pkts;
- data[i++] = ring->stats.bytes;
+ if (ring) {
+ data[i++] = ring->stats.pkts;
+ data[i++] = ring->stats.bytes;
+ } else {
+ data[i++] = 0;
+ data[i++] = 0;
+ }
}
rcu_read_unlock();
goto done;
}
- for (i = 0; i < vsi->num_txq; i++) {
+ for (i = 0; i < vsi->alloc_txq; i++) {
/* clone ring and setup updated count */
tx_rings[i] = *vsi->tx_rings[i];
tx_rings[i].count = new_tx_cnt;
goto done;
}
- for (i = 0; i < vsi->num_rxq; i++) {
+ for (i = 0; i < vsi->alloc_rxq; i++) {
/* clone ring and setup updated count */
rx_rings[i] = *vsi->rx_rings[i];
rx_rings[i].count = new_rx_cnt;
#define PFINT_FW_CTL_CAUSE_ENA_S 30
#define PFINT_FW_CTL_CAUSE_ENA_M BIT(PFINT_FW_CTL_CAUSE_ENA_S)
#define PFINT_OICR 0x0016CA00
-#define PFINT_OICR_HLP_RDY_S 14
-#define PFINT_OICR_HLP_RDY_M BIT(PFINT_OICR_HLP_RDY_S)
-#define PFINT_OICR_CPM_RDY_S 15
-#define PFINT_OICR_CPM_RDY_M BIT(PFINT_OICR_CPM_RDY_S)
#define PFINT_OICR_ECC_ERR_S 16
#define PFINT_OICR_ECC_ERR_M BIT(PFINT_OICR_ECC_ERR_S)
#define PFINT_OICR_MAL_DETECT_S 19
#define PFINT_OICR_GRST_M BIT(PFINT_OICR_GRST_S)
#define PFINT_OICR_PCI_EXCEPTION_S 21
#define PFINT_OICR_PCI_EXCEPTION_M BIT(PFINT_OICR_PCI_EXCEPTION_S)
-#define PFINT_OICR_GPIO_S 22
-#define PFINT_OICR_GPIO_M BIT(PFINT_OICR_GPIO_S)
-#define PFINT_OICR_STORM_DETECT_S 24
-#define PFINT_OICR_STORM_DETECT_M BIT(PFINT_OICR_STORM_DETECT_S)
#define PFINT_OICR_HMC_ERR_S 26
#define PFINT_OICR_HMC_ERR_M BIT(PFINT_OICR_HMC_ERR_S)
#define PFINT_OICR_PE_CRITERR_S 28
struct ice_rlan_ctx {
u16 head;
u16 cpuid; /* bigger than needed, see above for reason */
+#define ICE_RLAN_BASE_S 7
u64 base;
u16 qlen;
#define ICE_RLAN_CTX_DBUF_S 7
case ice_aqc_opc_get_link_status:
if (ice_handle_link_event(pf))
dev_err(&pf->pdev->dev,
- "Could not handle link event");
+ "Could not handle link event\n");
break;
default:
dev_dbg(&pf->pdev->dev,
return pending && (i == ICE_DFLT_IRQ_WORK);
}
+/**
+ * ice_ctrlq_pending - check if there is a difference between ntc and ntu
+ * @hw: pointer to hardware info
+ * @cq: control queue information
+ *
+ * returns true if there are pending messages in a queue, false if there aren't
+ */
+static bool ice_ctrlq_pending(struct ice_hw *hw, struct ice_ctl_q_info *cq)
+{
+ u16 ntu;
+
+ ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask);
+ return cq->rq.next_to_clean != ntu;
+}
+
/**
* ice_clean_adminq_subtask - clean the AdminQ rings
* @pf: board private structure
static void ice_clean_adminq_subtask(struct ice_pf *pf)
{
struct ice_hw *hw = &pf->hw;
- u32 val;
if (!test_bit(__ICE_ADMINQ_EVENT_PENDING, pf->state))
return;
clear_bit(__ICE_ADMINQ_EVENT_PENDING, pf->state);
- /* re-enable Admin queue interrupt causes */
- val = rd32(hw, PFINT_FW_CTL);
- wr32(hw, PFINT_FW_CTL, (val | PFINT_FW_CTL_CAUSE_ENA_M));
+ /* There might be a situation where new messages arrive to a control
+ * queue between processing the last message and clearing the
+ * EVENT_PENDING bit. So before exiting, check queue head again (using
+ * ice_ctrlq_pending) and process new messages if any.
+ */
+ if (ice_ctrlq_pending(hw, &hw->adminq))
+ __ice_clean_ctrlq(pf, ICE_CTL_Q_ADMIN);
ice_flush(hw);
}
qcount = numq_tc;
}
- /* find higher power-of-2 of qcount */
- pow = ilog2(qcount);
-
- if (!is_power_of_2(qcount))
- pow++;
+ /* find the (rounded up) power-of-2 of qcount */
+ pow = order_base_2(qcount);
for (i = 0; i < ICE_MAX_TRAFFIC_CLASS; i++) {
if (!(vsi->tc_cfg.ena_tc & BIT(i))) {
ctxt->info.sw_flags = ICE_AQ_VSI_SW_FLAG_SRC_PRUNE;
/* Traffic from VSI can be sent to LAN */
ctxt->info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
- /* Allow all packets untagged/tagged */
- ctxt->info.port_vlan_flags = ((ICE_AQ_VSI_PVLAN_MODE_ALL &
- ICE_AQ_VSI_PVLAN_MODE_M) >>
- ICE_AQ_VSI_PVLAN_MODE_S);
- /* Show VLAN/UP from packets in Rx descriptors */
- ctxt->info.port_vlan_flags |= ((ICE_AQ_VSI_PVLAN_EMOD_STR_BOTH &
- ICE_AQ_VSI_PVLAN_EMOD_M) >>
- ICE_AQ_VSI_PVLAN_EMOD_S);
+
+ /* By default bits 3 and 4 in vlan_flags are 0's which results in legacy
+ * behavior (show VLAN, DEI, and UP) in descriptor. Also, allow all
+ * packets untagged/tagged.
+ */
+ ctxt->info.vlan_flags = ((ICE_AQ_VSI_VLAN_MODE_ALL &
+ ICE_AQ_VSI_VLAN_MODE_M) >>
+ ICE_AQ_VSI_VLAN_MODE_S);
+
/* Have 1:1 UP mapping for both ingress/egress tables */
table |= ICE_UP_TABLE_TRANSLATE(0, 0);
table |= ICE_UP_TABLE_TRANSLATE(1, 1);
wr32(hw, PFINT_OICR_ENA, 0); /* disable all */
rd32(hw, PFINT_OICR); /* read to clear */
- val = (PFINT_OICR_HLP_RDY_M |
- PFINT_OICR_CPM_RDY_M |
- PFINT_OICR_ECC_ERR_M |
+ val = (PFINT_OICR_ECC_ERR_M |
PFINT_OICR_MAL_DETECT_M |
PFINT_OICR_GRST_M |
PFINT_OICR_PCI_EXCEPTION_M |
- PFINT_OICR_GPIO_M |
- PFINT_OICR_STORM_DETECT_M |
- PFINT_OICR_HMC_ERR_M);
+ PFINT_OICR_HMC_ERR_M |
+ PFINT_OICR_PE_CRITERR_M);
wr32(hw, PFINT_OICR_ENA, val);
skip_req_irq:
ice_ena_misc_vector(pf);
- val = (pf->oicr_idx & PFINT_OICR_CTL_MSIX_INDX_M) |
- (ICE_RX_ITR & PFINT_OICR_CTL_ITR_INDX_M) |
- PFINT_OICR_CTL_CAUSE_ENA_M;
+ val = ((pf->oicr_idx & PFINT_OICR_CTL_MSIX_INDX_M) |
+ PFINT_OICR_CTL_CAUSE_ENA_M);
wr32(hw, PFINT_OICR_CTL, val);
/* This enables Admin queue Interrupt causes */
- val = (pf->oicr_idx & PFINT_FW_CTL_MSIX_INDX_M) |
- (ICE_RX_ITR & PFINT_FW_CTL_ITR_INDX_M) |
- PFINT_FW_CTL_CAUSE_ENA_M;
+ val = ((pf->oicr_idx & PFINT_FW_CTL_MSIX_INDX_M) |
+ PFINT_FW_CTL_CAUSE_ENA_M);
wr32(hw, PFINT_FW_CTL, val);
itr_gran = hw->itr_gran_200;
if (test_bit(ICE_FLAG_MSIX_ENA, pf->flags))
ice_dis_msix(pf);
- devm_kfree(&pf->pdev->dev, pf->irq_tracker);
- pf->irq_tracker = NULL;
+ if (pf->irq_tracker) {
+ devm_kfree(&pf->pdev->dev, pf->irq_tracker);
+ pf->irq_tracker = NULL;
+ }
}
/**
err = pcim_iomap_regions(pdev, BIT(ICE_BAR0), pci_name(pdev));
if (err) {
- dev_err(&pdev->dev, "I/O map error %d\n", err);
+ dev_err(&pdev->dev, "BAR0 I/O map error %d\n", err);
return err;
}
enum ice_status status;
/* Here we are configuring the VSI to let the driver add VLAN tags by
- * setting port_vlan_flags to ICE_AQ_VSI_PVLAN_MODE_ALL. The actual VLAN
- * tag insertion happens in the Tx hot path, in ice_tx_map.
+ * setting vlan_flags to ICE_AQ_VSI_VLAN_MODE_ALL. The actual VLAN tag
+ * insertion happens in the Tx hot path, in ice_tx_map.
*/
- ctxt.info.port_vlan_flags = ICE_AQ_VSI_PVLAN_MODE_ALL;
+ ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL;
ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
ctxt.vsi_num = vsi->vsi_num;
return -EIO;
}
- vsi->info.port_vlan_flags = ctxt.info.port_vlan_flags;
+ vsi->info.vlan_flags = ctxt.info.vlan_flags;
return 0;
}
*/
if (ena) {
/* Strip VLAN tag from Rx packet and put it in the desc */
- ctxt.info.port_vlan_flags = ICE_AQ_VSI_PVLAN_EMOD_STR_BOTH;
+ ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_STR_BOTH;
} else {
/* Disable stripping. Leave tag in packet */
- ctxt.info.port_vlan_flags = ICE_AQ_VSI_PVLAN_EMOD_NOTHING;
+ ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_NOTHING;
}
+ /* Allow all packets untagged/tagged */
+ ctxt.info.vlan_flags |= ICE_AQ_VSI_VLAN_MODE_ALL;
+
ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
ctxt.vsi_num = vsi->vsi_num;
return -EIO;
}
- vsi->info.port_vlan_flags = ctxt.info.port_vlan_flags;
+ vsi->info.vlan_flags = ctxt.info.vlan_flags;
return 0;
}
/* clear the context structure first */
memset(&rlan_ctx, 0, sizeof(rlan_ctx));
- rlan_ctx.base = ring->dma >> 7;
+ rlan_ctx.base = ring->dma >> ICE_RLAN_BASE_S;
rlan_ctx.qlen = ring->count;
{
int err;
- ice_set_rx_mode(vsi->netdev);
-
- err = ice_restore_vlan(vsi);
- if (err)
- return err;
+ if (vsi->netdev) {
+ ice_set_rx_mode(vsi->netdev);
+ err = ice_restore_vlan(vsi);
+ if (err)
+ return err;
+ }
err = ice_vsi_cfg_txqs(vsi);
if (!err)
*/
static int ice_vsi_setup_tx_rings(struct ice_vsi *vsi)
{
- int i, err;
+ int i, err = 0;
if (!vsi->num_txq) {
dev_err(&vsi->back->pdev->dev, "VSI %d has 0 Tx queues\n",
*/
static int ice_vsi_setup_rx_rings(struct ice_vsi *vsi)
{
- int i, err;
+ int i, err = 0;
if (!vsi->num_rxq) {
dev_err(&vsi->back->pdev->dev, "VSI %d has 0 Rx queues\n",
u8 count = 0;
if (new_mtu == netdev->mtu) {
- netdev_warn(netdev, "mtu is already %d\n", netdev->mtu);
+ netdev_warn(netdev, "mtu is already %u\n", netdev->mtu);
return 0;
}
*
* This function will request NVM ownership.
*/
-static enum
-ice_status ice_acquire_nvm(struct ice_hw *hw,
- enum ice_aq_res_access_type access)
+static enum ice_status
+ice_acquire_nvm(struct ice_hw *hw, enum ice_aq_res_access_type access)
{
if (hw->nvm.blank_nvm_mode)
return 0;
return status;
}
- if (owner == ICE_SCHED_NODE_OWNER_LAN)
- vsi->max_lanq[tc] = new_numqs;
+ vsi->max_lanq[tc] = new_numqs;
return status;
}
act |= (1 << ICE_LG_ACT_GENERIC_VALUE_S) & ICE_LG_ACT_GENERIC_VALUE_M;
lg_act->pdata.lg_act.act[1] = cpu_to_le32(act);
- act = (7 << ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_VALUE_M;
+ act = (ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX <<
+ ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_OFFSET_M;
/* Third action Marker value */
act |= ICE_LG_ACT_GENERIC;
act |= (sw_marker << ICE_LG_ACT_GENERIC_VALUE_S) &
ICE_LG_ACT_GENERIC_VALUE_M;
- act |= (0 << ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_VALUE_M;
lg_act->pdata.lg_act.act[2] = cpu_to_le32(act);
/* call the fill switch rule to fill the lookup tx rx structure */
u16 vsis_unallocated;
u16 flags;
struct ice_aqc_vsi_props info;
- bool alloc_from_pool;
+ u8 alloc_from_pool;
};
enum ice_sw_fwd_act_type {
u8 qgrp_size;
/* Rule creations populate these indicators basing on the switch type */
- bool lb_en; /* Indicate if packet can be looped back */
- bool lan_en; /* Indicate if packet can be forwarded to the uplink */
+ u8 lb_en; /* Indicate if packet can be looped back */
+ u8 lan_en; /* Indicate if packet can be forwarded to the uplink */
};
/* Bookkeeping structure to hold bitmap of VSIs corresponding to VSI list id */
u16 next_to_use;
u16 next_to_clean;
- bool ring_active; /* is ring online or not */
+ u8 ring_active; /* is ring online or not */
/* stats structs */
struct ice_q_stats stats;
u64 phy_type_low;
u16 max_frame_size;
u16 link_speed;
- bool lse_ena; /* Link Status Event notification */
+ u8 lse_ena; /* Link Status Event notification */
u8 link_info;
u8 an_info;
u8 ext_info;
struct ice_link_status link_info_old;
u64 phy_type_low;
enum ice_media_type media_type;
- bool get_link_info;
+ u8 get_link_info;
};
/* Common HW capabilities for SW use */
u32 oem_ver; /* OEM version info */
u16 sr_words; /* Shadow RAM size in words */
u16 ver; /* NVM package version */
- bool blank_nvm_mode; /* is NVM empty (no FW present) */
+ u8 blank_nvm_mode; /* is NVM empty (no FW present) */
};
/* Max number of port to queue branches w.r.t topology */
struct ice_aqc_txsched_elem_data info;
u32 agg_id; /* aggregator group id */
u16 vsi_id;
- bool in_use; /* suspended or in use */
+ u8 in_use; /* suspended or in use */
u8 tx_sched_layer; /* Logical Layer (1-9) */
u8 num_children;
u8 tc_num;
struct ice_sched_tx_policy {
u16 max_num_vsis;
u8 max_num_lan_qs_per_tc[ICE_MAX_TRAFFIC_CLASS];
- bool rdma_ena;
+ u8 rdma_ena;
};
struct ice_port_info {
struct list_head agg_list; /* lists all aggregator */
u8 lport;
#define ICE_LPORT_MASK 0xff
- bool is_vf;
+ u8 is_vf;
};
struct ice_switch_info {
u8 max_cgds;
u8 sw_entry_point_layer;
- bool evb_veb; /* true for VEB, false for VEPA */
+ u8 evb_veb; /* true for VEB, false for VEPA */
struct ice_bus_info bus;
struct ice_nvm_info nvm;
struct ice_hw_dev_caps dev_caps; /* device capabilities */
u8 itr_gran_100;
u8 itr_gran_50;
u8 itr_gran_25;
- bool ucast_shared; /* true if VSIs can share unicast addr */
+ u8 ucast_shared; /* true if VSIs can share unicast addr */
};
if (hw->phy.type == e1000_phy_m88)
igb_phy_disable_receiver(adapter);
- mdelay(500);
+ msleep(500);
return 0;
}
adapter->mac_table = kcalloc(hw->mac.rar_entry_count,
sizeof(struct igb_mac_addr),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!adapter->mac_table)
return -ENOMEM;
/* Setup and initialize a copy of the hw vlan table array */
adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!adapter->shadow_vfta)
return -ENOMEM;
if (skb->ip_summed != CHECKSUM_PARTIAL) {
csum_failed:
- if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
+ if (!(first->tx_flags & IGB_TX_FLAGS_VLAN) &&
+ !tx_ring->launchtime_enable)
return;
goto no_csum;
}
rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc);
rxdr->size = ALIGN(rxdr->size, 4096);
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
- GFP_KERNEL);
+ rxdr->desc = dma_zalloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
+ GFP_KERNEL);
if (!rxdr->desc) {
vfree(rxdr->buffer_info);
return -ENOMEM;
}
- memset(rxdr->desc, 0, rxdr->size);
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
}
/* alloc the udl from per cpu ddp pool */
- ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
+ ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp);
if (!ddp->udl) {
e_err(drv, "failed allocated ddp context\n");
goto out_noddp_unmap;
return 0;
/* Extra buffer to be shared by all DDPs for HW work around */
- buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+ buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
adapter->mac_table = kcalloc(hw->mac.num_rar_entries,
sizeof(struct ixgbe_mac_addr),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!adapter->mac_table)
return -ENOMEM;
struct ixgbe_adapter *adapter = netdev_priv(netdev);
if (adapter->xdp_prog) {
- e_warn(probe, "MTU cannot be changed while XDP program is loaded\n");
- return -EPERM;
+ int new_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct ixgbe_ring *ring = adapter->rx_ring[i];
+
+ if (new_frame_size > ixgbe_rx_bufsz(ring)) {
+ e_warn(probe, "Requested MTU size is not supported with XDP\n");
+ return -EINVAL;
+ }
+ }
}
/*
#ifdef CONFIG_IXGBE_DCB
if (tc) {
+ if (adapter->xdp_prog) {
+ e_warn(probe, "DCB is not supported with XDP\n");
+
+ ixgbe_init_interrupt_scheme(adapter);
+ if (netif_running(dev))
+ ixgbe_open(dev);
+ return -EINVAL;
+ }
+
netdev_set_num_tc(dev, tc);
ixgbe_set_prio_tc_map(adapter);
struct tcf_exts *exts, u64 *action, u8 *queue)
{
const struct tc_action *a;
- LIST_HEAD(actions);
+ int i;
if (!tcf_exts_has_actions(exts))
return -EINVAL;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
-
+ tcf_exts_for_each_action(i, a, exts) {
/* Drop action */
if (is_tcf_gact_shot(a)) {
*action = IXGBE_FDIR_DROP_QUEUE;
int tcs = adapter->hw_tcs ? : 1;
int pool, err;
+ if (adapter->xdp_prog) {
+ e_warn(probe, "L2FW offload is not supported with XDP\n");
+ return ERR_PTR(-EINVAL);
+ }
+
/* The hardware supported by ixgbe only filters on the destination MAC
* address. In order to avoid issues we only support offloading modes
* where the hardware can actually provide the functionality.
struct ixgbe_hw *hw = &adapter->hw;
int i;
+ if (adapter->xdp_prog) {
+ e_warn(probe, "SRIOV is not supported with XDP\n");
+ return -EINVAL;
+ }
+
/* Enable VMDq flag so device will be set in VM mode */
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED |
IXGBE_FLAG_VMDQ_ENABLED;
static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
{
struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+ u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
u8 num_tcs = adapter->hw_tcs;
+ u32 reg_val;
+ u32 queue;
+ u32 word;
/* remove VLAN filters beloning to this VF */
ixgbe_clear_vf_vlans(adapter, vf);
/* reset VF api back to unknown */
adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
+
+ /* Restart each queue for given VF */
+ for (queue = 0; queue < q_per_pool; queue++) {
+ unsigned int reg_idx = (vf * q_per_pool) + queue;
+
+ reg_val = IXGBE_READ_REG(hw, IXGBE_PVFTXDCTL(reg_idx));
+
+ /* Re-enabling only configured queues */
+ if (reg_val) {
+ reg_val |= IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val);
+ reg_val &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val);
+ }
+ }
+
+ /* Clear VF's mailbox memory */
+ for (word = 0; word < IXGBE_VFMAILBOX_SIZE; word++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf), word, 0);
+
+ IXGBE_WRITE_FLUSH(hw);
}
static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
/* Translated register #defines */
#define IXGBE_PVFTDH(P) (0x06010 + (0x40 * (P)))
#define IXGBE_PVFTDT(P) (0x06018 + (0x40 * (P)))
+#define IXGBE_PVFTXDCTL(P) (0x06028 + (0x40 * (P)))
#define IXGBE_PVFTDWBAL(P) (0x06038 + (0x40 * (P)))
#define IXGBE_PVFTDWBAH(P) (0x0603C + (0x40 * (P)))
goto out_ok;
modify_ip_header = false;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
+ int k;
+
if (!is_tcf_pedit(a))
continue;
nkeys = tcf_pedit_nkeys(a);
- for (i = 0; i < nkeys; i++) {
- htype = tcf_pedit_htype(a, i);
+ for (k = 0; k < nkeys; k++) {
+ htype = tcf_pedit_htype(a, k);
if (htype == TCA_PEDIT_KEY_EX_HDR_TYPE_IP4 ||
htype == TCA_PEDIT_KEY_EX_HDR_TYPE_IP6) {
modify_ip_header = true;
const struct tc_action *a;
LIST_HEAD(actions);
u32 action = 0;
- int err;
+ int err, i;
if (!tcf_exts_has_actions(exts))
return -EINVAL;
attr->flow_tag = MLX5_FS_DEFAULT_FLOW_TAG;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
if (is_tcf_gact_shot(a)) {
action |= MLX5_FLOW_CONTEXT_ACTION_DROP;
if (MLX5_CAP_FLOWTABLE(priv->mdev,
LIST_HEAD(actions);
bool encap = false;
u32 action = 0;
- int err;
+ int err, i;
if (!tcf_exts_has_actions(exts))
return -EINVAL;
attr->in_rep = rpriv->rep;
attr->in_mdev = priv->mdev;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
if (is_tcf_gact_shot(a)) {
action |= MLX5_FLOW_CONTEXT_ACTION_DROP |
MLX5_FLOW_CONTEXT_ACTION_COUNT;
return -ENOMEM;
mall_tc_entry->cookie = f->cookie;
- tcf_exts_to_list(f->exts, &actions);
- a = list_first_entry(&actions, struct tc_action, list);
+ a = tcf_exts_first_action(f->exts);
if (is_tcf_mirred_egress_mirror(a) && protocol == htons(ETH_P_ALL)) {
struct mlxsw_sp_port_mall_mirror_tc_entry *mirror;
void
mlxsw_sp_port_vlan_router_leave(struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan);
void mlxsw_sp_rif_destroy(struct mlxsw_sp_rif *rif);
+void mlxsw_sp_rif_destroy_by_dev(struct mlxsw_sp *mlxsw_sp,
+ struct net_device *dev);
/* spectrum_kvdl.c */
enum mlxsw_sp_kvdl_entry_type {
struct netlink_ext_ack *extack)
{
const struct tc_action *a;
- LIST_HEAD(actions);
- int err;
+ int err, i;
if (!tcf_exts_has_actions(exts))
return 0;
if (err)
return err;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
if (is_tcf_gact_ok(a)) {
err = mlxsw_sp_acl_rulei_act_terminate(rulei);
if (err) {
mlxsw_sp_vr_put(mlxsw_sp, vr);
}
+void mlxsw_sp_rif_destroy_by_dev(struct mlxsw_sp *mlxsw_sp,
+ struct net_device *dev)
+{
+ struct mlxsw_sp_rif *rif;
+
+ rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, dev);
+ if (!rif)
+ return;
+ mlxsw_sp_rif_destroy(rif);
+}
+
static void
mlxsw_sp_rif_subport_params_init(struct mlxsw_sp_rif_params *params,
struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan)
return !!mlxsw_sp_bridge_device_find(mlxsw_sp->bridge, br_dev);
}
+static int mlxsw_sp_bridge_device_upper_rif_destroy(struct net_device *dev,
+ void *data)
+{
+ struct mlxsw_sp *mlxsw_sp = data;
+
+ mlxsw_sp_rif_destroy_by_dev(mlxsw_sp, dev);
+ return 0;
+}
+
+static void mlxsw_sp_bridge_device_rifs_destroy(struct mlxsw_sp *mlxsw_sp,
+ struct net_device *dev)
+{
+ mlxsw_sp_rif_destroy_by_dev(mlxsw_sp, dev);
+ netdev_walk_all_upper_dev_rcu(dev,
+ mlxsw_sp_bridge_device_upper_rif_destroy,
+ mlxsw_sp);
+}
+
static struct mlxsw_sp_bridge_device *
mlxsw_sp_bridge_device_create(struct mlxsw_sp_bridge *bridge,
struct net_device *br_dev)
mlxsw_sp_bridge_device_destroy(struct mlxsw_sp_bridge *bridge,
struct mlxsw_sp_bridge_device *bridge_device)
{
+ mlxsw_sp_bridge_device_rifs_destroy(bridge->mlxsw_sp,
+ bridge_device->dev);
list_del(&bridge_device->list);
if (bridge_device->vlan_enabled)
bridge->vlan_enabled_exists = false;
struct net_device *netdev,
struct nfp_fl_payload *nfp_flow)
{
- int act_len, act_cnt, err, tun_out_cnt, out_cnt;
+ int act_len, act_cnt, err, tun_out_cnt, out_cnt, i;
enum nfp_flower_tun_type tun_type;
const struct tc_action *a;
u32 csum_updated = 0;
- LIST_HEAD(actions);
memset(nfp_flow->action_data, 0, NFP_FL_MAX_A_SIZ);
nfp_flow->meta.act_len = 0;
tun_out_cnt = 0;
out_cnt = 0;
- tcf_exts_to_list(flow->exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, flow->exts) {
err = nfp_flower_loop_action(app, a, flow, nfp_flow, &act_len,
netdev, &tun_type, &tun_out_cnt,
&out_cnt, &csum_updated);
if (i == QED_INIT_MAX_POLL_COUNT) {
DP_ERR(p_hwfn,
- "Timeout when polling reg: 0x%08x [ Waiting-for: %08x Got: %08x (comparsion %08x)]\n",
+ "Timeout when polling reg: 0x%08x [ Waiting-for: %08x Got: %08x (comparison %08x)]\n",
addr, le32_to_cpu(cmd->expected_val),
val, le32_to_cpu(cmd->op_data));
}
#include "qed_reg_addr.h"
#include "qed_sriov.h"
-#define CHIP_MCP_RESP_ITER_US 10
+#define QED_MCP_RESP_ITER_US 10
#define QED_DRV_MB_MAX_RETRIES (500 * 1000) /* Account for 5 sec */
#define QED_MCP_RESET_RETRIES (50 * 1000) /* Account for 500 msec */
return 0;
}
+/* Maximum of 1 sec to wait for the SHMEM ready indication */
+#define QED_MCP_SHMEM_RDY_MAX_RETRIES 20
+#define QED_MCP_SHMEM_RDY_ITER_MS 50
+
static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
struct qed_mcp_info *p_info = p_hwfn->mcp_info;
+ u8 cnt = QED_MCP_SHMEM_RDY_MAX_RETRIES;
+ u8 msec = QED_MCP_SHMEM_RDY_ITER_MS;
u32 drv_mb_offsize, mfw_mb_offsize;
u32 mcp_pf_id = MCP_PF_ID(p_hwfn);
p_info->public_base = qed_rd(p_hwfn, p_ptt, MISC_REG_SHARED_MEM_ADDR);
- if (!p_info->public_base)
- return 0;
+ if (!p_info->public_base) {
+ DP_NOTICE(p_hwfn,
+ "The address of the MCP scratch-pad is not configured\n");
+ return -EINVAL;
+ }
p_info->public_base |= GRCBASE_MCP;
+ /* Get the MFW MB address and number of supported messages */
+ mfw_mb_offsize = qed_rd(p_hwfn, p_ptt,
+ SECTION_OFFSIZE_ADDR(p_info->public_base,
+ PUBLIC_MFW_MB));
+ p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id);
+ p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt,
+ p_info->mfw_mb_addr +
+ offsetof(struct public_mfw_mb,
+ sup_msgs));
+
+ /* The driver can notify that there was an MCP reset, and might read the
+ * SHMEM values before the MFW has completed initializing them.
+ * To avoid this, the "sup_msgs" field in the MFW mailbox is used as a
+ * data ready indication.
+ */
+ while (!p_info->mfw_mb_length && --cnt) {
+ msleep(msec);
+ p_info->mfw_mb_length =
+ (u16)qed_rd(p_hwfn, p_ptt,
+ p_info->mfw_mb_addr +
+ offsetof(struct public_mfw_mb, sup_msgs));
+ }
+
+ if (!cnt) {
+ DP_NOTICE(p_hwfn,
+ "Failed to get the SHMEM ready notification after %d msec\n",
+ QED_MCP_SHMEM_RDY_MAX_RETRIES * msec);
+ return -EBUSY;
+ }
+
/* Calculate the driver and MFW mailbox address */
drv_mb_offsize = qed_rd(p_hwfn, p_ptt,
SECTION_OFFSIZE_ADDR(p_info->public_base,
"drv_mb_offsiz = 0x%x, drv_mb_addr = 0x%x mcp_pf_id = 0x%x\n",
drv_mb_offsize, p_info->drv_mb_addr, mcp_pf_id);
- /* Set the MFW MB address */
- mfw_mb_offsize = qed_rd(p_hwfn, p_ptt,
- SECTION_OFFSIZE_ADDR(p_info->public_base,
- PUBLIC_MFW_MB));
- p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id);
- p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, p_info->mfw_mb_addr);
-
/* Get the current driver mailbox sequence before sending
* the first command
*/
int qed_mcp_reset(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
- u32 org_mcp_reset_seq, seq, delay = CHIP_MCP_RESP_ITER_US, cnt = 0;
+ u32 org_mcp_reset_seq, seq, delay = QED_MCP_RESP_ITER_US, cnt = 0;
int rc = 0;
+ if (p_hwfn->mcp_info->b_block_cmd) {
+ DP_NOTICE(p_hwfn,
+ "The MFW is not responsive. Avoid sending MCP_RESET mailbox command.\n");
+ return -EBUSY;
+ }
+
/* Ensure that only a single thread is accessing the mailbox */
spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
(p_mb_params->cmd | seq_num), p_mb_params->param);
}
+static void qed_mcp_cmd_set_blocking(struct qed_hwfn *p_hwfn, bool block_cmd)
+{
+ p_hwfn->mcp_info->b_block_cmd = block_cmd;
+
+ DP_INFO(p_hwfn, "%s sending of mailbox commands to the MFW\n",
+ block_cmd ? "Block" : "Unblock");
+}
+
+static void qed_mcp_print_cpu_info(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt)
+{
+ u32 cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2;
+ u32 delay = QED_MCP_RESP_ITER_US;
+
+ cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
+ cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
+ cpu_pc_0 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+ udelay(delay);
+ cpu_pc_1 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+ udelay(delay);
+ cpu_pc_2 = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_PROGRAM_COUNTER);
+
+ DP_NOTICE(p_hwfn,
+ "MCP CPU info: mode 0x%08x, state 0x%08x, pc {0x%08x, 0x%08x, 0x%08x}\n",
+ cpu_mode, cpu_state, cpu_pc_0, cpu_pc_1, cpu_pc_2);
+}
+
static int
_qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
struct qed_mcp_mb_params *p_mb_params,
- u32 max_retries, u32 delay)
+ u32 max_retries, u32 usecs)
{
+ u32 cnt = 0, msecs = DIV_ROUND_UP(usecs, 1000);
struct qed_mcp_cmd_elem *p_cmd_elem;
- u32 cnt = 0;
u16 seq_num;
int rc = 0;
goto err;
spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
- udelay(delay);
+
+ if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP))
+ msleep(msecs);
+ else
+ udelay(usecs);
} while (++cnt < max_retries);
if (cnt >= max_retries) {
* The spinlock stays locked until the list element is removed.
*/
- udelay(delay);
+ if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP))
+ msleep(msecs);
+ else
+ udelay(usecs);
+
spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
if (p_cmd_elem->b_is_completed)
DP_NOTICE(p_hwfn,
"The MFW failed to respond to command 0x%08x [param 0x%08x].\n",
p_mb_params->cmd, p_mb_params->param);
+ qed_mcp_print_cpu_info(p_hwfn, p_ptt);
spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem);
spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
+ if (!QED_MB_FLAGS_IS_SET(p_mb_params, AVOID_BLOCK))
+ qed_mcp_cmd_set_blocking(p_hwfn, true);
+
return -EAGAIN;
}
"MFW mailbox: response 0x%08x param 0x%08x [after %d.%03d ms]\n",
p_mb_params->mcp_resp,
p_mb_params->mcp_param,
- (cnt * delay) / 1000, (cnt * delay) % 1000);
+ (cnt * usecs) / 1000, (cnt * usecs) % 1000);
/* Clear the sequence number from the MFW response */
p_mb_params->mcp_resp &= FW_MSG_CODE_MASK;
{
size_t union_data_size = sizeof(union drv_union_data);
u32 max_retries = QED_DRV_MB_MAX_RETRIES;
- u32 delay = CHIP_MCP_RESP_ITER_US;
+ u32 usecs = QED_MCP_RESP_ITER_US;
/* MCP not initialized */
if (!qed_mcp_is_init(p_hwfn)) {
return -EBUSY;
}
+ if (p_hwfn->mcp_info->b_block_cmd) {
+ DP_NOTICE(p_hwfn,
+ "The MFW is not responsive. Avoid sending mailbox command 0x%08x [param 0x%08x].\n",
+ p_mb_params->cmd, p_mb_params->param);
+ return -EBUSY;
+ }
+
if (p_mb_params->data_src_size > union_data_size ||
p_mb_params->data_dst_size > union_data_size) {
DP_ERR(p_hwfn,
return -EINVAL;
}
+ if (QED_MB_FLAGS_IS_SET(p_mb_params, CAN_SLEEP)) {
+ max_retries = DIV_ROUND_UP(max_retries, 1000);
+ usecs *= 1000;
+ }
+
return _qed_mcp_cmd_and_union(p_hwfn, p_ptt, p_mb_params, max_retries,
- delay);
+ usecs);
}
int qed_mcp_cmd(struct qed_hwfn *p_hwfn,
mb_params.data_src_size = sizeof(load_req);
mb_params.p_data_dst = &load_rsp;
mb_params.data_dst_size = sizeof(load_rsp);
+ mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
DP_VERBOSE(p_hwfn, QED_MSG_SP,
"Load Request: param 0x%08x [init_hw %d, drv_type %d, hsi_ver %d, pda 0x%04x]\n",
int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
- u32 wol_param, mcp_resp, mcp_param;
+ struct qed_mcp_mb_params mb_params;
+ u32 wol_param;
switch (p_hwfn->cdev->wol_config) {
case QED_OV_WOL_DISABLED:
wol_param = DRV_MB_PARAM_UNLOAD_WOL_MCP;
}
- return qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_UNLOAD_REQ, wol_param,
- &mcp_resp, &mcp_param);
+ memset(&mb_params, 0, sizeof(mb_params));
+ mb_params.cmd = DRV_MSG_CODE_UNLOAD_REQ;
+ mb_params.param = wol_param;
+ mb_params.flags = QED_MB_FLAG_CAN_SLEEP | QED_MB_FLAG_AVOID_BLOCK;
+
+ return qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params);
}
int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
return rc;
}
+/* A maximal 100 msec waiting time for the MCP to halt */
+#define QED_MCP_HALT_SLEEP_MS 10
+#define QED_MCP_HALT_MAX_RETRIES 10
+
int qed_mcp_halt(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
- u32 resp = 0, param = 0;
+ u32 resp = 0, param = 0, cpu_state, cnt = 0;
int rc;
rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_MCP_HALT, 0, &resp,
¶m);
- if (rc)
+ if (rc) {
DP_ERR(p_hwfn, "MCP response failure, aborting\n");
+ return rc;
+ }
- return rc;
+ do {
+ msleep(QED_MCP_HALT_SLEEP_MS);
+ cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
+ if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED)
+ break;
+ } while (++cnt < QED_MCP_HALT_MAX_RETRIES);
+
+ if (cnt == QED_MCP_HALT_MAX_RETRIES) {
+ DP_NOTICE(p_hwfn,
+ "Failed to halt the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n",
+ qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE), cpu_state);
+ return -EBUSY;
+ }
+
+ qed_mcp_cmd_set_blocking(p_hwfn, true);
+
+ return 0;
}
+#define QED_MCP_RESUME_SLEEP_MS 10
+
int qed_mcp_resume(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
{
- u32 value, cpu_mode;
+ u32 cpu_mode, cpu_state;
qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_STATE, 0xffffffff);
- value = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
- value &= ~MCP_REG_CPU_MODE_SOFT_HALT;
- qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, value);
cpu_mode = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_MODE);
+ cpu_mode &= ~MCP_REG_CPU_MODE_SOFT_HALT;
+ qed_wr(p_hwfn, p_ptt, MCP_REG_CPU_MODE, cpu_mode);
+ msleep(QED_MCP_RESUME_SLEEP_MS);
+ cpu_state = qed_rd(p_hwfn, p_ptt, MCP_REG_CPU_STATE);
- return (cpu_mode & MCP_REG_CPU_MODE_SOFT_HALT) ? -EAGAIN : 0;
+ if (cpu_state & MCP_REG_CPU_STATE_SOFT_HALTED) {
+ DP_NOTICE(p_hwfn,
+ "Failed to resume the MCP [CPU_MODE = 0x%08x, CPU_STATE = 0x%08x]\n",
+ cpu_mode, cpu_state);
+ return -EBUSY;
+ }
+
+ qed_mcp_cmd_set_blocking(p_hwfn, false);
+
+ return 0;
}
int qed_mcp_ov_update_current_config(struct qed_hwfn *p_hwfn,
*/
spinlock_t cmd_lock;
+ /* Flag to indicate whether sending a MFW mailbox command is blocked */
+ bool b_block_cmd;
+
/* Spinlock used for syncing SW link-changes and link-changes
* originating from attention context.
*/
spinlock_t link_lock;
- bool block_mb_sending;
+
u32 public_base;
u32 drv_mb_addr;
u32 mfw_mb_addr;
};
struct qed_mcp_mb_params {
- u32 cmd;
- u32 param;
- void *p_data_src;
- u8 data_src_size;
- void *p_data_dst;
- u8 data_dst_size;
- u32 mcp_resp;
- u32 mcp_param;
+ u32 cmd;
+ u32 param;
+ void *p_data_src;
+ void *p_data_dst;
+ u8 data_src_size;
+ u8 data_dst_size;
+ u32 mcp_resp;
+ u32 mcp_param;
+ u32 flags;
+#define QED_MB_FLAG_CAN_SLEEP (0x1 << 0)
+#define QED_MB_FLAG_AVOID_BLOCK (0x1 << 1)
+#define QED_MB_FLAGS_IS_SET(params, flag) \
+ ({ typeof(params) __params = (params); \
+ (__params && (__params->flags & QED_MB_FLAG_ ## flag)); })
};
struct qed_drv_tlv_hdr {
0
#define MCP_REG_CPU_STATE \
0xe05004UL
+#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1UL << 10)
#define MCP_REG_CPU_EVENT_MASK \
0xe05008UL
+#define MCP_REG_CPU_PROGRAM_COUNTER 0xe0501cUL
#define PGLUE_B_REG_PF_BAR0_SIZE \
0x2aae60UL
#define PGLUE_B_REG_PF_BAR1_SIZE \
static int qede_parse_actions(struct qede_dev *edev,
struct tcf_exts *exts)
{
- int rc = -EINVAL, num_act = 0;
+ int rc = -EINVAL, num_act = 0, i;
const struct tc_action *a;
bool is_drop = false;
- LIST_HEAD(actions);
if (!tcf_exts_has_actions(exts)) {
DP_NOTICE(edev, "No tc actions received\n");
return rc;
}
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(a, &actions, list) {
+ tcf_exts_for_each_action(i, a, exts) {
num_act++;
if (is_tcf_gact_shot(a))
return status;
}
-static netdev_features_t qlge_fix_features(struct net_device *ndev,
- netdev_features_t features)
-{
- int err;
-
- /* Update the behavior of vlan accel in the adapter */
- err = qlge_update_hw_vlan_features(ndev, features);
- if (err)
- return err;
-
- return features;
-}
-
static int qlge_set_features(struct net_device *ndev,
netdev_features_t features)
{
netdev_features_t changed = ndev->features ^ features;
+ int err;
+
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
+ /* Update the behavior of vlan accel in the adapter */
+ err = qlge_update_hw_vlan_features(ndev, features);
+ if (err)
+ return err;
- if (changed & NETIF_F_HW_VLAN_CTAG_RX)
qlge_vlan_mode(ndev, features);
+ }
return 0;
}
.ndo_set_mac_address = qlge_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = qlge_tx_timeout,
- .ndo_fix_features = qlge_fix_features,
.ndo_set_features = qlge_set_features,
.ndo_vlan_rx_add_vid = qlge_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qlge_vlan_rx_kill_vid,
+/* SPDX-License-Identifier: GPL-2.0 */
/* Renesas Ethernet AVB device driver
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
* Copyright (C) 2015-2016 Cogent Embedded, Inc. <source@cogentembedded.com>
*
* Based on the SuperH Ethernet driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
*/
#ifndef __RAVB_H__
+// SPDX-License-Identifier: GPL-2.0
/* Renesas Ethernet AVB device driver
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
* Copyright (C) 2015-2016 Cogent Embedded, Inc. <source@cogentembedded.com>
*
* Based on the SuperH Ethernet driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
*/
#include <linux/cache.h>
+// SPDX-License-Identifier: GPL-2.0
/* SuperH Ethernet device driver
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2008-2014 Renesas Solutions Corp.
* Copyright (C) 2013-2017 Cogent Embedded, Inc.
* Copyright (C) 2014 Codethink Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
*/
#include <linux/module.h>
+/* SPDX-License-Identifier: GPL-2.0 */
/* SuperH Ethernet device driver
*
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
* Copyright (C) 2008-2012 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
*/
#ifndef __SH_ETH_H__
select PHYLIB
select CRC32
select MII
- depends on OF && COMMON_CLK && HAS_DMA
+ depends on OF && HAS_DMA
help
Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
config DWMAC_IPQ806X
tristate "QCA IPQ806x DWMAC support"
default ARCH_QCOM
- depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
select MFD_SYSCON
help
Support for QCA IPQ806X DWMAC Ethernet.
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
default ARCH_ROCKCHIP
- depends on OF && COMMON_CLK && (ARCH_ROCKCHIP || COMPILE_TEST)
+ depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
select MFD_SYSCON
help
Support for Ethernet controller on Rockchip RK3288 SoC.
config DWMAC_STI
tristate "STi GMAC support"
default ARCH_STI
- depends on OF && COMMON_CLK && (ARCH_STI || COMPILE_TEST)
+ depends on OF && (ARCH_STI || COMPILE_TEST)
select MFD_SYSCON
---help---
Support for ethernet controller on STi SOCs.
config DWMAC_SUNXI
tristate "Allwinner GMAC support"
default ARCH_SUNXI
- depends on OF && COMMON_CLK && (ARCH_SUNXI || COMPILE_TEST)
+ depends on OF && (ARCH_SUNXI || COMPILE_TEST)
---help---
Support for Allwinner A20/A31 GMAC ethernet controllers.
struct stmmac_tc_entry *action_entry = entry;
const struct tc_action *act;
struct tcf_exts *exts;
- LIST_HEAD(actions);
+ int i;
exts = cls->knode.exts;
if (!tcf_exts_has_actions(exts))
if (frag)
action_entry = frag;
- tcf_exts_to_list(exts, &actions);
- list_for_each_entry(act, &actions, list) {
+ tcf_exts_for_each_action(i, act, exts) {
/* Accept */
if (is_tcf_gact_ok(act)) {
action_entry->val.af = 1;
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/etherdevice.h>
+#include <linux/pci.h>
#include <linux/skbuff.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
{
struct net_device *ndev;
struct net_device_context *net_device_ctx;
+ struct device *pdev = vf_netdev->dev.parent;
struct netvsc_device *netvsc_dev;
int ret;
if (vf_netdev->addr_len != ETH_ALEN)
return NOTIFY_DONE;
+ if (!pdev || !dev_is_pci(pdev) || dev_is_pf(pdev))
+ return NOTIFY_DONE;
+
/*
* We will use the MAC address to locate the synthetic interface to
* associate with the VF interface. If we don't find a matching
netdev->hw_features &= ~NETIF_F_RXCSUM;
}
- if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x3011 &&
- udev->serial && !strcmp(udev->serial, "000001000000")) {
+ if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x3011 && udev->serial &&
+ (!strcmp(udev->serial, "000001000000") || !strcmp(udev->serial, "000002000000"))) {
dev_info(&udev->dev, "Dell TB16 Dock, disable RX aggregation");
set_bit(DELL_TB_RX_AGG_BUG, &tp->flags);
}
old_value = *dbbuf_db;
*dbbuf_db = value;
+ /*
+ * Ensure that the doorbell is updated before reading the event
+ * index from memory. The controller needs to provide similar
+ * ordering to ensure the envent index is updated before reading
+ * the doorbell.
+ */
+ mb();
+
if (!nvme_dbbuf_need_event(*dbbuf_ei, value, old_value))
return false;
}
error = nvmet_init_discovery();
if (error)
- goto out;
+ goto out_free_work_queue;
error = nvmet_init_configfs();
if (error)
out_exit_discovery:
nvmet_exit_discovery();
+out_free_work_queue:
+ destroy_workqueue(buffered_io_wq);
out:
return error;
}
struct fcloop_tport *tport = tls_req->tport;
struct nvmefc_ls_req *lsreq = tls_req->lsreq;
- if (tport->remoteport)
+ if (!tport || tport->remoteport)
lsreq->done(lsreq, tls_req->status);
}
if (!rport->targetport) {
tls_req->status = -ECONNREFUSED;
+ tls_req->tport = NULL;
schedule_work(&tls_req->work);
return ret;
}
*/
DEFINE_RAW_SPINLOCK(devtree_lock);
+bool of_node_name_eq(const struct device_node *np, const char *name)
+{
+ const char *node_name;
+ size_t len;
+
+ if (!np)
+ return false;
+
+ node_name = kbasename(np->full_name);
+ len = strchrnul(node_name, '@') - node_name;
+
+ return (strlen(name) == len) && (strncmp(node_name, name, len) == 0);
+}
+
+bool of_node_name_prefix(const struct device_node *np, const char *prefix)
+{
+ if (!np)
+ return false;
+
+ return strncmp(kbasename(np->full_name), prefix, strlen(prefix)) == 0;
+}
+
int of_n_addr_cells(struct device_node *np)
{
u32 cells;
}
EXPORT_SYMBOL(of_get_next_available_child);
+/**
+ * of_get_compatible_child - Find compatible child node
+ * @parent: parent node
+ * @compatible: compatible string
+ *
+ * Lookup child node whose compatible property contains the given compatible
+ * string.
+ *
+ * Returns a node pointer with refcount incremented, use of_node_put() on it
+ * when done; or NULL if not found.
+ */
+struct device_node *of_get_compatible_child(const struct device_node *parent,
+ const char *compatible)
+{
+ struct device_node *child;
+
+ for_each_child_of_node(parent, child) {
+ if (of_device_is_compatible(child, compatible))
+ break;
+ }
+
+ return child;
+}
+EXPORT_SYMBOL(of_get_compatible_child);
+
/**
* of_get_child_by_name - Find the child node by name for a given parent
* @node: parent node
mutex_lock(&tz->lock);
- if (mode == THERMAL_DEVICE_ENABLED)
+ if (mode == THERMAL_DEVICE_ENABLED) {
tz->polling_delay = data->polling_delay;
- else
+ tz->passive_delay = data->passive_delay;
+ } else {
tz->polling_delay = 0;
+ tz->passive_delay = 0;
+ }
mutex_unlock(&tz->lock);
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
#include <linux/module.h>
#include <linux/platform_device.h>
int ret;
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
- u32 site = 0;
+ u32 site;
if (!np) {
dev_err(&pdev->dev, "Device OF-Node is NULL");
if (ret < 0)
goto err_tmu;
- data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id,
- data, &tmu_tz_ops);
+ data->tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ data->sensor_id,
+ data, &tmu_tz_ops);
if (IS_ERR(data->tz)) {
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
}
/* Enable monitoring */
- site |= 0x1 << (15 - data->sensor_id);
+ site = 0x1 << (15 - data->sensor_id);
tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
return 0;
{
struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
- thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
-
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+// SPDX-License-Identifier: GPL-2.0
/*
* R-Car Gen3 THS thermal sensor driver
* Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen.
*
* Copyright (C) 2016 Renesas Electronics Corporation.
* Copyright (C) 2016 Sang Engineering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
*/
#include <linux/delay.h>
#include <linux/err.h>
+// SPDX-License-Identifier: GPL-2.0
/*
* R-Car THS/TSC thermal sensor driver
*
* Copyright (C) 2012 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*/
#include <linux/delay.h>
#include <linux/err.h>
};
module_platform_driver(rcar_thermal_driver);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver");
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
list_for_each_entry_safe(node, n, &d->pending_list, node) {
struct vhost_iotlb_msg *vq_msg = &node->msg.iotlb;
if (msg->iova <= vq_msg->iova &&
- msg->iova + msg->size - 1 > vq_msg->iova &&
+ msg->iova + msg->size - 1 >= vq_msg->iova &&
vq_msg->type == VHOST_IOTLB_MISS) {
vhost_poll_queue(&node->vq->poll);
list_del(&node->node);
}
static DEVICE_ATTR_RO(modalias);
+static ssize_t state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n",
+ xenbus_strstate(to_xenbus_device(dev)->state));
+}
+static DEVICE_ATTR_RO(state);
+
static struct attribute *xenbus_dev_attrs[] = {
&dev_attr_nodename.attr,
&dev_attr_devtype.attr,
&dev_attr_modalias.attr,
+ &dev_attr_state.attr,
NULL,
};
#include <linux/buffer_head.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/bio.h>
-#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <linux/mpage.h>
#include <linux/mpage.h>
#include <linux/user_namespace.h>
#include <linux/seq_file.h>
+#include <linux/blkdev.h>
#include "isofs.h"
#include "zisofs.h"
/*
* What if bugger tells us to go beyond page size?
*/
+ if (bdev_logical_block_size(s->s_bdev) > 2048) {
+ printk(KERN_WARNING
+ "ISOFS: unsupported/invalid hardware sector size %d\n",
+ bdev_logical_block_size(s->s_bdev));
+ goto out_freesbi;
+ }
opt.blocksize = sb_min_blocksize(s, opt.blocksize);
sbi->s_high_sierra = 0; /* default is iso9660 */
struct fsnotify_mark *mark;
assert_spin_locked(&conn->lock);
+ /* We can get detached connector here when inode is getting unlinked. */
+ if (!fsnotify_valid_obj_type(conn->type))
+ return;
hlist_for_each_entry(mark, &conn->list, obj_list) {
if (mark->flags & FSNOTIFY_MARK_FLAG_ATTACHED)
new_mask |= mark->mask;
}
- if (WARN_ON(!fsnotify_valid_obj_type(conn->type)))
- return;
-
*fsnotify_conn_mask_p(conn) = new_mask;
}
#include <linux/quotaops.h>
#include <linux/types.h>
#include <linux/writeback.h>
+#include <linux/nospec.h>
static int check_quotactl_permission(struct super_block *sb, int type, int cmd,
qid_t id)
struct if_dqinfo uinfo;
int ret;
- /* This checks whether qc_state has enough entries... */
- BUILD_BUG_ON(MAXQUOTAS > XQM_MAXQUOTAS);
if (!sb->s_qcop->get_state)
return -ENOSYS;
ret = sb->s_qcop->get_state(sb, &state);
* GETXSTATE quotactl has space for just one set of time limits so
* report them for the first enabled quota type
*/
- for (type = 0; type < XQM_MAXQUOTAS; type++)
+ for (type = 0; type < MAXQUOTAS; type++)
if (state.s_state[type].flags & QCI_ACCT_ENABLED)
break;
- BUG_ON(type == XQM_MAXQUOTAS);
+ BUG_ON(type == MAXQUOTAS);
fqs->qs_btimelimit = state.s_state[type].spc_timelimit;
fqs->qs_itimelimit = state.s_state[type].ino_timelimit;
fqs->qs_rtbtimelimit = state.s_state[type].rt_spc_timelimit;
* GETXSTATV quotactl has space for just one set of time limits so
* report them for the first enabled quota type
*/
- for (type = 0; type < XQM_MAXQUOTAS; type++)
+ for (type = 0; type < MAXQUOTAS; type++)
if (state.s_state[type].flags & QCI_ACCT_ENABLED)
break;
- BUG_ON(type == XQM_MAXQUOTAS);
+ BUG_ON(type == MAXQUOTAS);
fqs->qs_btimelimit = state.s_state[type].spc_timelimit;
fqs->qs_itimelimit = state.s_state[type].ino_timelimit;
fqs->qs_rtbtimelimit = state.s_state[type].rt_spc_timelimit;
{
int ret;
- if (type >= (XQM_COMMAND(cmd) ? XQM_MAXQUOTAS : MAXQUOTAS))
+ if (type >= MAXQUOTAS)
return -EINVAL;
+ type = array_index_nospec(type, MAXQUOTAS);
/*
* Quota not supported on this fs? Check this before s_quota_types
* since they needn't be set if quota is not supported at all.
struct kernel_lb_addr *root)
{
struct buffer_head *bh = NULL;
- long lastblock;
uint16_t ident;
- struct udf_sb_info *sbi;
if (fileset->logicalBlockNum != 0xFFFFFFFF ||
fileset->partitionReferenceNum != 0xFFFF) {
return 1;
}
- }
-
- sbi = UDF_SB(sb);
- if (!bh) {
- /* Search backwards through the partitions */
- struct kernel_lb_addr newfileset;
-
-/* --> cvg: FIXME - is it reasonable? */
- return 1;
-
- for (newfileset.partitionReferenceNum = sbi->s_partitions - 1;
- (newfileset.partitionReferenceNum != 0xFFFF &&
- fileset->logicalBlockNum == 0xFFFFFFFF &&
- fileset->partitionReferenceNum == 0xFFFF);
- newfileset.partitionReferenceNum--) {
- lastblock = sbi->s_partmaps
- [newfileset.partitionReferenceNum]
- .s_partition_len;
- newfileset.logicalBlockNum = 0;
-
- do {
- bh = udf_read_ptagged(sb, &newfileset, 0,
- &ident);
- if (!bh) {
- newfileset.logicalBlockNum++;
- continue;
- }
-
- switch (ident) {
- case TAG_IDENT_SBD:
- {
- struct spaceBitmapDesc *sp;
- sp = (struct spaceBitmapDesc *)
- bh->b_data;
- newfileset.logicalBlockNum += 1 +
- ((le32_to_cpu(sp->numOfBytes) +
- sizeof(struct spaceBitmapDesc)
- - 1) >> sb->s_blocksize_bits);
- brelse(bh);
- break;
- }
- case TAG_IDENT_FSD:
- *fileset = newfileset;
- break;
- default:
- newfileset.logicalBlockNum++;
- brelse(bh);
- bh = NULL;
- break;
- }
- } while (newfileset.logicalBlockNum < lastblock &&
- fileset->logicalBlockNum == 0xFFFFFFFF &&
- fileset->partitionReferenceNum == 0xFFFF);
- }
- }
-
- if ((fileset->logicalBlockNum != 0xFFFFFFFF ||
- fileset->partitionReferenceNum != 0xFFFF) && bh) {
udf_debug("Fileset at block=%u, partition=%u\n",
fileset->logicalBlockNum,
fileset->partitionReferenceNum);
- sbi->s_partition = fileset->partitionReferenceNum;
+ UDF_SB(sb)->s_partition = fileset->partitionReferenceNum;
udf_load_fileset(sb, bh, root);
brelse(bh);
return 0;
*/
#define PART_DESC_ALLOC_STEP 32
+struct part_desc_seq_scan_data {
+ struct udf_vds_record rec;
+ u32 partnum;
+};
+
struct desc_seq_scan_data {
struct udf_vds_record vds[VDS_POS_LENGTH];
unsigned int size_part_descs;
- struct udf_vds_record *part_descs_loc;
+ unsigned int num_part_descs;
+ struct part_desc_seq_scan_data *part_descs_loc;
};
static struct udf_vds_record *handle_partition_descriptor(
{
struct partitionDesc *desc = (struct partitionDesc *)bh->b_data;
int partnum;
+ int i;
partnum = le16_to_cpu(desc->partitionNumber);
- if (partnum >= data->size_part_descs) {
- struct udf_vds_record *new_loc;
+ for (i = 0; i < data->num_part_descs; i++)
+ if (partnum == data->part_descs_loc[i].partnum)
+ return &(data->part_descs_loc[i].rec);
+ if (data->num_part_descs >= data->size_part_descs) {
+ struct part_desc_seq_scan_data *new_loc;
unsigned int new_size = ALIGN(partnum, PART_DESC_ALLOC_STEP);
new_loc = kcalloc(new_size, sizeof(*new_loc), GFP_KERNEL);
data->part_descs_loc = new_loc;
data->size_part_descs = new_size;
}
- return &(data->part_descs_loc[partnum]);
+ return &(data->part_descs_loc[data->num_part_descs++].rec);
}
memset(data.vds, 0, sizeof(struct udf_vds_record) * VDS_POS_LENGTH);
data.size_part_descs = PART_DESC_ALLOC_STEP;
+ data.num_part_descs = 0;
data.part_descs_loc = kcalloc(data.size_part_descs,
sizeof(*data.part_descs_loc),
GFP_KERNEL);
* are in it.
*/
for (; (!done && block <= lastblock); block++) {
-
bh = udf_read_tagged(sb, block, block, &ident);
if (!bh)
break;
}
/* Now handle prevailing Partition Descriptors */
- for (i = 0; i < data.size_part_descs; i++) {
- if (data.part_descs_loc[i].block) {
- ret = udf_load_partdesc(sb,
- data.part_descs_loc[i].block);
- if (ret < 0)
- return ret;
- }
+ for (i = 0; i < data.num_part_descs; i++) {
+ ret = udf_load_partdesc(sb, data.part_descs_loc[i].rec.block);
+ if (ret < 0)
+ return ret;
}
return 0;
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * pinctrl-tegra-io-pad.h: Tegra I/O pad source voltage configuration constants
+ * pinctrl bindings.
+ *
+ * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Aapo Vienamo <avienamo@nvidia.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
+
+/* Voltage levels of the I/O pad's source rail */
+#define TEGRA_IO_PAD_VOLTAGE_1V8 0
+#define TEGRA_IO_PAD_VOLTAGE_3V3 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */
+/*
+ * Actions Semi S900 SPS
+ *
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+#ifndef DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+#define DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+
+#define S900_PD_GPU_B 0
+#define S900_PD_VCE 1
+#define S900_PD_SENSOR 2
+#define S900_PD_VDE 3
+#define S900_PD_HDE 4
+#define S900_PD_USB3 5
+#define S900_PD_DDR0 6
+#define S900_PD_DDR1 7
+#define S900_PD_DE 8
+#define S900_PD_NAND 9
+#define S900_PD_USB2_H0 10
+#define S900_PD_USB2_H1 11
+
+#endif
#define __declare_arg_0(a0, res) \
struct arm_smccc_res *___res = res; \
- register u32 r0 asm("r0") = a0; \
+ register unsigned long r0 asm("r0") = (u32)a0; \
register unsigned long r1 asm("r1"); \
register unsigned long r2 asm("r2"); \
register unsigned long r3 asm("r3")
#define __declare_arg_1(a0, a1, res) \
+ typeof(a1) __a1 = a1; \
struct arm_smccc_res *___res = res; \
- register u32 r0 asm("r0") = a0; \
- register typeof(a1) r1 asm("r1") = a1; \
+ register unsigned long r0 asm("r0") = (u32)a0; \
+ register unsigned long r1 asm("r1") = __a1; \
register unsigned long r2 asm("r2"); \
register unsigned long r3 asm("r3")
#define __declare_arg_2(a0, a1, a2, res) \
+ typeof(a1) __a1 = a1; \
+ typeof(a2) __a2 = a2; \
struct arm_smccc_res *___res = res; \
- register u32 r0 asm("r0") = a0; \
- register typeof(a1) r1 asm("r1") = a1; \
- register typeof(a2) r2 asm("r2") = a2; \
+ register unsigned long r0 asm("r0") = (u32)a0; \
+ register unsigned long r1 asm("r1") = __a1; \
+ register unsigned long r2 asm("r2") = __a2; \
register unsigned long r3 asm("r3")
#define __declare_arg_3(a0, a1, a2, a3, res) \
+ typeof(a1) __a1 = a1; \
+ typeof(a2) __a2 = a2; \
+ typeof(a3) __a3 = a3; \
struct arm_smccc_res *___res = res; \
- register u32 r0 asm("r0") = a0; \
- register typeof(a1) r1 asm("r1") = a1; \
- register typeof(a2) r2 asm("r2") = a2; \
- register typeof(a3) r3 asm("r3") = a3
+ register unsigned long r0 asm("r0") = (u32)a0; \
+ register unsigned long r1 asm("r1") = __a1; \
+ register unsigned long r2 asm("r2") = __a2; \
+ register unsigned long r3 asm("r3") = __a3
#define __declare_arg_4(a0, a1, a2, a3, a4, res) \
+ typeof(a4) __a4 = a4; \
__declare_arg_3(a0, a1, a2, a3, res); \
- register typeof(a4) r4 asm("r4") = a4
+ register unsigned long r4 asm("r4") = __a4
#define __declare_arg_5(a0, a1, a2, a3, a4, a5, res) \
+ typeof(a5) __a5 = a5; \
__declare_arg_4(a0, a1, a2, a3, a4, res); \
- register typeof(a5) r5 asm("r5") = a5
+ register unsigned long r5 asm("r5") = __a5
#define __declare_arg_6(a0, a1, a2, a3, a4, a5, a6, res) \
+ typeof(a6) __a6 = a6; \
__declare_arg_5(a0, a1, a2, a3, a4, a5, res); \
- register typeof(a6) r6 asm("r6") = a6
+ register unsigned long r6 asm("r6") = __a6
#define __declare_arg_7(a0, a1, a2, a3, a4, a5, a6, a7, res) \
+ typeof(a7) __a7 = a7; \
__declare_arg_6(a0, a1, a2, a3, a4, a5, a6, res); \
- register typeof(a7) r7 asm("r7") = a7
+ register unsigned long r7 asm("r7") = __a7
#define ___declare_args(count, ...) __declare_arg_ ## count(__VA_ARGS__)
#define __declare_args(count, ...) ___declare_args(count, __VA_ARGS__)
}
u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold);
-void i2c_release_dma_safe_msg_buf(struct i2c_msg *msg, u8 *buf);
+void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred);
int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr);
/**
#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+extern bool of_node_name_eq(const struct device_node *np, const char *name);
+extern bool of_node_name_prefix(const struct device_node *np, const char *prefix);
+
static inline const char *of_node_full_name(const struct device_node *np)
{
return np ? np->full_name : "<no-node>";
extern struct device_node *of_get_next_available_child(
const struct device_node *node, struct device_node *prev);
+extern struct device_node *of_get_compatible_child(const struct device_node *parent,
+ const char *compatible);
extern struct device_node *of_get_child_by_name(const struct device_node *node,
const char *name);
return NULL;
}
+static inline bool of_node_name_eq(const struct device_node *np, const char *name)
+{
+ return false;
+}
+
+static inline bool of_node_name_prefix(const struct device_node *np, const char *prefix)
+{
+ return false;
+}
+
static inline const char* of_node_full_name(const struct device_node *np)
{
return "<no-node>";
return false;
}
+static inline struct device_node *of_get_compatible_child(const struct device_node *parent,
+ const char *compatible)
+{
+ return NULL;
+}
+
static inline struct device_node *of_get_child_by_name(
const struct device_node *node,
const char *name)
return of_find_matching_node_and_match(from, matches, NULL);
}
+static inline const char *of_node_get_device_type(const struct device_node *np)
+{
+ return of_get_property(np, "type", NULL);
+}
+
+static inline bool of_node_is_type(const struct device_node *np, const char *type)
+{
+ const char *match = of_node_get_device_type(np);
+
+ return np && match && type && !strcmp(match, type);
+}
+
/**
* of_property_count_u8_elems - Count the number of u8 elements in a property
*
/*
* Driver for Texas Instruments INA219, INA226 power monitor chips
*
- * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
struct qc_state {
unsigned int s_incoredqs; /* Number of dquots in core */
- /*
- * Per quota type information. The array should really have
- * max(MAXQUOTAS, XQM_MAXQUOTAS) entries. BUILD_BUG_ON in
- * quota_getinfo() makes sure XQM_MAXQUOTAS is large enough. Once VFS
- * supports project quotas, this can be changed to MAXQUOTAS
- */
- struct qc_type_state s_state[XQM_MAXQUOTAS];
+ struct qc_type_state s_state[MAXQUOTAS]; /* Per quota type information */
};
/* Structure for communicating via ->set_info */
const struct tc_action_ops *ops;
__u32 type; /* for backward compat(TCA_OLD_COMPAT) */
__u32 order;
- struct list_head list;
struct tcf_idrinfo *idrinfo;
u32 tcfa_index;
refcount_t tcfa_refcnt;
atomic_t tcfa_bindcnt;
- u32 tcfa_capab;
int tcfa_action;
struct tcf_t tcfa_tm;
struct gnet_stats_basic_packed tcfa_bstats;
#define tcf_index common.tcfa_index
#define tcf_refcnt common.tcfa_refcnt
#define tcf_bindcnt common.tcfa_bindcnt
-#define tcf_capab common.tcfa_capab
#define tcf_action common.tcfa_action
#define tcf_tm common.tcfa_tm
#define tcf_bstats common.tcfa_bstats
size_t (*get_fill_size)(const struct tc_action *act);
struct net_device *(*get_dev)(const struct tc_action *a);
void (*put_dev)(struct net_device *dev);
- int (*delete)(struct net *net, u32 index);
};
struct tc_action_net {
const struct tc_action_ops *ops,
struct netlink_ext_ack *extack);
int tcf_idr_search(struct tc_action_net *tn, struct tc_action **a, u32 index);
-bool tcf_idr_check(struct tc_action_net *tn, u32 index, struct tc_action **a,
- int bind);
int tcf_idr_create(struct tc_action_net *tn, u32 index, struct nlattr *est,
struct tc_action **a, const struct tc_action_ops *ops,
int bind, bool cpustats);
void tcf_idr_cleanup(struct tc_action_net *tn, u32 index);
int tcf_idr_check_alloc(struct tc_action_net *tn, u32 *index,
struct tc_action **a, int bind);
-int tcf_idr_delete_index(struct tc_action_net *tn, u32 index);
int __tcf_idr_release(struct tc_action *a, bool bind, bool strict);
static inline int tcf_idr_release(struct tc_action *a, bool bind)
#endif
}
-static inline void tcf_exts_to_list(const struct tcf_exts *exts,
- struct list_head *actions)
-{
#ifdef CONFIG_NET_CLS_ACT
- int i;
-
- for (i = 0; i < exts->nr_actions; i++) {
- struct tc_action *a = exts->actions[i];
-
- list_add_tail(&a->list, actions);
- }
+#define tcf_exts_for_each_action(i, a, exts) \
+ for (i = 0; i < TCA_ACT_MAX_PRIO && ((a) = (exts)->actions[i]); i++)
+#else
+#define tcf_exts_for_each_action(i, a, exts) \
+ for (; 0; (void)(i), (void)(a), (void)(exts))
#endif
-}
static inline void
tcf_exts_stats_update(const struct tcf_exts *exts,
#endif
}
+static inline struct tc_action *tcf_exts_first_action(struct tcf_exts *exts)
+{
+#ifdef CONFIG_NET_CLS_ACT
+ return exts->actions[0];
+#else
+ return NULL;
+#endif
+}
+
/**
* tcf_exts_exec - execute tc filter extensions
* @skb: socket buffer
#include <linux/jhash.h>
#include <linux/filter.h>
#include <linux/rculist_nulls.h>
+#include <linux/random.h>
#include <uapi/linux/btf.h>
#include "percpu_freelist.h"
#include "bpf_lru_list.h"
atomic_t count; /* number of elements in this hashtable */
u32 n_buckets; /* number of hash buckets */
u32 elem_size; /* size of each element in bytes */
+ u32 hashrnd;
};
/* each htab element is struct htab_elem + key + value */
if (!htab->buckets)
goto free_htab;
+ htab->hashrnd = get_random_int();
for (i = 0; i < htab->n_buckets; i++) {
INIT_HLIST_NULLS_HEAD(&htab->buckets[i].head, i);
raw_spin_lock_init(&htab->buckets[i].lock);
return ERR_PTR(err);
}
-static inline u32 htab_map_hash(const void *key, u32 key_len)
+static inline u32 htab_map_hash(const void *key, u32 key_len, u32 hashrnd)
{
- return jhash(key, key_len, 0);
+ return jhash(key, key_len, hashrnd);
}
static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash)
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
head = select_bucket(htab, hash);
if (!key)
goto find_first_elem;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
head = select_bucket(htab, hash);
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
key_size = map->key_size;
- hash = htab_map_hash(key, key_size);
+ hash = htab_map_hash(key, key_size, htab->hashrnd);
b = __select_bucket(htab, hash);
head = &b->head;
static void smap_write_space(struct sock *sk)
{
struct smap_psock *psock;
+ void (*write_space)(struct sock *sk);
rcu_read_lock();
psock = smap_psock_sk(sk);
if (likely(psock && test_bit(SMAP_TX_RUNNING, &psock->state)))
schedule_work(&psock->tx_work);
+ write_space = psock->save_write_space;
rcu_read_unlock();
+ write_space(sk);
}
static void smap_stop_sock(struct smap_psock *psock, struct sock *sk)
return ERR_PTR(-EPERM);
/* check sanity of attributes */
- if (attr->max_entries == 0 || attr->value_size != 4 ||
+ if (attr->max_entries == 0 ||
+ attr->key_size == 0 ||
+ attr->value_size != 4 ||
attr->map_flags & ~SOCK_CREATE_FLAG_MASK)
return ERR_PTR(-EINVAL);
}
l_new = kmalloc_node(htab->elem_size, GFP_ATOMIC | __GFP_NOWARN,
htab->map.numa_node);
- if (!l_new)
+ if (!l_new) {
+ atomic_dec(&htab->count);
return ERR_PTR(-ENOMEM);
+ }
memcpy(l_new->key, key, key_size);
l_new->sk = sk;
* @name: Name of the step
* @startup: Startup function of the step
* @teardown: Teardown function of the step
- * @skip_onerr: Do not invoke the functions on error rollback
- * Will go away once the notifiers are gone
* @cant_stop: Bringup/teardown can't be stopped at this step
*/
struct cpuhp_step {
struct hlist_node *node);
} teardown;
struct hlist_head list;
- bool skip_onerr;
bool cant_stop;
bool multi_instance;
};
static void undo_cpu_up(unsigned int cpu, struct cpuhp_cpu_state *st)
{
- for (st->state--; st->state > st->target; st->state--) {
- struct cpuhp_step *step = cpuhp_get_step(st->state);
-
- if (!step->skip_onerr)
- cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
- }
+ for (st->state--; st->state > st->target; st->state--)
+ cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
}
static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
WARN_ON_ONCE(!cpuhp_is_ap_state(state));
- if (st->rollback) {
- struct cpuhp_step *step = cpuhp_get_step(state);
- if (step->skip_onerr)
- goto next;
- }
-
if (cpuhp_is_atomic_state(state)) {
local_irq_disable();
st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
st->should_run = false;
}
-next:
cpuhp_lock_release(bringup);
if (!st->should_run)
static void undo_cpu_down(unsigned int cpu, struct cpuhp_cpu_state *st)
{
- for (st->state++; st->state < st->target; st->state++) {
- struct cpuhp_step *step = cpuhp_get_step(st->state);
-
- if (!step->skip_onerr)
- cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
- }
+ for (st->state++; st->state < st->target; st->state++)
+ cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
}
static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
#include <linux/kmsg_dump.h>
#include <linux/syslog.h>
#include <linux/cpu.h>
-#include <linux/notifier.h>
#include <linux/rculist.h>
#include <linux/poll.h>
#include <linux/irq_work.h>
* entering idle state. This should only be used for scheduler events.
* Use touch_softlockup_watchdog() for everything else.
*/
-void touch_softlockup_watchdog_sched(void)
+notrace void touch_softlockup_watchdog_sched(void)
{
/*
* Preemption can be enabled. It doesn't matter which CPU's timestamp
raw_cpu_write(watchdog_touch_ts, 0);
}
-void touch_softlockup_watchdog(void)
+notrace void touch_softlockup_watchdog(void)
{
touch_softlockup_watchdog_sched();
wq_watchdog_touch(raw_smp_processor_id());
static unsigned long hardlockup_allcpu_dumped;
static atomic_t watchdog_cpus = ATOMIC_INIT(0);
-void arch_touch_nmi_watchdog(void)
+notrace void arch_touch_nmi_watchdog(void)
{
/*
* Using __raw here because some code paths have
mod_timer(&wq_watchdog_timer, jiffies + thresh);
}
-void wq_watchdog_touch(int cpu)
+notrace void wq_watchdog_touch(int cpu)
{
if (cpu >= 0)
per_cpu(wq_watchdog_touched_cpu, cpu) = jiffies;
*/
#include <linux/percpu_counter.h>
-#include <linux/notifier.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/rhashtable.h>
#include <linux/err.h>
#include <linux/export.h>
-#include <linux/rhashtable.h>
#define HASH_DEFAULT_SIZE 64UL
#define HASH_MIN_SIZE 4U
#include <linux/mpage.h>
#include <linux/rmap.h>
#include <linux/percpu.h>
-#include <linux/notifier.h>
#include <linux/smp.h>
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/ratelimit.h>
#include <linux/oom.h>
-#include <linux/notifier.h>
#include <linux/topology.h>
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <linux/slab.h>
#include "slab.h"
#include <linux/proc_fs.h>
-#include <linux/notifier.h>
#include <linux/seq_file.h>
#include <linux/kasan.h>
#include <linux/cpu.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
-#include <linux/notifier.h>
#include <linux/skbuff.h>
#include <linux/bpf.h>
#include <linux/bpf_trace.h>
const struct tc_action *a;
struct dsa_port *to_dp;
int err = -EOPNOTSUPP;
- LIST_HEAD(actions);
if (!ds->ops->port_mirror_add)
return err;
if (!tcf_exts_has_one_action(cls->exts))
return err;
- tcf_exts_to_list(cls->exts, &actions);
- a = list_first_entry(&actions, struct tc_action, list);
+ a = tcf_exts_first_action(cls->exts);
if (is_tcf_mirred_egress_mirror(a) && protocol == htons(ETH_P_ALL)) {
struct dsa_mall_mirror_tc_entry *mirror;
u32 mode:3, /* current bbr_mode in state machine */
prev_ca_state:3, /* CA state on previous ACK */
packet_conservation:1, /* use packet conservation? */
- restore_cwnd:1, /* decided to revert cwnd to old value */
round_start:1, /* start of packet-timed tx->ack round? */
idle_restart:1, /* restarting after idle? */
probe_rtt_round_done:1, /* a BBR_PROBE_RTT round at 4 pkts? */
- unused:12,
+ unused:13,
lt_is_sampling:1, /* taking long-term ("LT") samples now? */
lt_rtt_cnt:7, /* round trips in long-term interval */
lt_use_bw:1; /* use lt_bw as our bw estimate? */
/* If we estimate we're policed, use lt_bw for this many round trips: */
static const u32 bbr_lt_bw_max_rtts = 48;
+static void bbr_check_probe_rtt_done(struct sock *sk);
+
/* Do we estimate that STARTUP filled the pipe? */
static bool bbr_full_bw_reached(const struct sock *sk)
{
*/
if (bbr->mode == BBR_PROBE_BW)
bbr_set_pacing_rate(sk, bbr_bw(sk), BBR_UNIT);
+ else if (bbr->mode == BBR_PROBE_RTT)
+ bbr_check_probe_rtt_done(sk);
}
}
cwnd = tcp_packets_in_flight(tp) + acked;
} else if (prev_state >= TCP_CA_Recovery && state < TCP_CA_Recovery) {
/* Exiting loss recovery; restore cwnd saved before recovery. */
- bbr->restore_cwnd = 1;
+ cwnd = max(cwnd, bbr->prior_cwnd);
bbr->packet_conservation = 0;
}
bbr->prev_ca_state = state;
- if (bbr->restore_cwnd) {
- /* Restore cwnd after exiting loss recovery or PROBE_RTT. */
- cwnd = max(cwnd, bbr->prior_cwnd);
- bbr->restore_cwnd = 0;
- }
-
if (bbr->packet_conservation) {
*new_cwnd = max(cwnd, tcp_packets_in_flight(tp) + acked);
return true; /* yes, using packet conservation */
{
struct tcp_sock *tp = tcp_sk(sk);
struct bbr *bbr = inet_csk_ca(sk);
- u32 cwnd = 0, target_cwnd = 0;
+ u32 cwnd = tp->snd_cwnd, target_cwnd = 0;
if (!acked)
- return;
+ goto done; /* no packet fully ACKed; just apply caps */
if (bbr_set_cwnd_to_recover_or_restore(sk, rs, acked, &cwnd))
goto done;
bbr_reset_probe_bw_mode(sk); /* we estimate queue is drained */
}
+static void bbr_check_probe_rtt_done(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+
+ if (!(bbr->probe_rtt_done_stamp &&
+ after(tcp_jiffies32, bbr->probe_rtt_done_stamp)))
+ return;
+
+ bbr->min_rtt_stamp = tcp_jiffies32; /* wait a while until PROBE_RTT */
+ tp->snd_cwnd = max(tp->snd_cwnd, bbr->prior_cwnd);
+ bbr_reset_mode(sk);
+}
+
/* The goal of PROBE_RTT mode is to have BBR flows cooperatively and
* periodically drain the bottleneck queue, to converge to measure the true
* min_rtt (unloaded propagation delay). This allows the flows to keep queues
} else if (bbr->probe_rtt_done_stamp) {
if (bbr->round_start)
bbr->probe_rtt_round_done = 1;
- if (bbr->probe_rtt_round_done &&
- after(tcp_jiffies32, bbr->probe_rtt_done_stamp)) {
- bbr->min_rtt_stamp = tcp_jiffies32;
- bbr->restore_cwnd = 1; /* snap to prior_cwnd */
- bbr_reset_mode(sk);
- }
+ if (bbr->probe_rtt_round_done)
+ bbr_check_probe_rtt_done(sk);
}
}
/* Restart after idle ends only once we process a new S/ACK for data */
bbr->has_seen_rtt = 0;
bbr_init_pacing_rate_from_rtt(sk);
- bbr->restore_cwnd = 0;
bbr->round_start = 0;
bbr->idle_restart = 0;
bbr->full_bw_reached = 0;
if (res)
goto fail;
sock_set_flag(sk, SOCK_USE_WRITE_QUEUE);
+
+ /* Please enforce IP_DF and IPID==0 for RST and
+ * ACK sent in SYN-RECV and TIME-WAIT state.
+ */
+ inet_sk(sk)->pmtudisc = IP_PMTUDISC_DO;
+
*per_cpu_ptr(net->ipv4.tcp_sk, cpu) = sk;
}
ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0);
- ip6_route_add(&cfg, GFP_ATOMIC, NULL);
+ ip6_route_add(&cfg, GFP_KERNEL, NULL);
}
static struct inet6_dev *addrconf_add_dev(struct net_device *dev)
if (addr.s6_addr32[3]) {
add_addr(idev, &addr, plen, scope);
addrconf_prefix_route(&addr, plen, 0, idev->dev, 0, pflags,
- GFP_ATOMIC);
+ GFP_KERNEL);
return;
}
add_addr(idev, &addr, plen, flag);
addrconf_prefix_route(&addr, plen, 0, idev->dev,
- 0, pflags, GFP_ATOMIC);
+ 0, pflags, GFP_KERNEL);
}
}
}
}
}
+ lwtstate_put(f6i->fib6_nh.nh_lwtstate);
+
if (f6i->fib6_nh.nh_dev)
dev_put(f6i->fib6_nh.nh_dev);
}
t = rtnl_dereference(ip6n->tnls_wc[0]);
- unregister_netdevice_queue(t->dev, list);
+ if (t)
+ unregister_netdevice_queue(t->dev, list);
}
static int __net_init vti6_init_net(struct net *net)
rt->dst.error = 0;
rt->dst.output = ip6_output;
- if (ort->fib6_type == RTN_LOCAL) {
+ if (ort->fib6_type == RTN_LOCAL || ort->fib6_type == RTN_ANYCAST) {
rt->dst.input = ip6_input;
} else if (ipv6_addr_type(&ort->fib6_dst.addr) & IPV6_ADDR_MULTICAST) {
rt->dst.input = ip6_mc_input;
bool found;
int rc;
- if (id > ndp->package_num) {
+ if (id > ndp->package_num - 1) {
netdev_info(ndp->ndev.dev, "NCSI: No package with id %u\n", id);
return -ENODEV;
}
return 0; /* done */
hdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq,
- &ncsi_genl_family, 0, NCSI_CMD_PKG_INFO);
+ &ncsi_genl_family, NLM_F_MULTI, NCSI_CMD_PKG_INFO);
if (!hdr) {
rc = -EMSGSIZE;
goto err;
#include <net/tcp.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
-#include <net/tcp.h>
#include <net/addrconf.h>
#include "rds.h"
}
EXPORT_SYMBOL(tcf_generic_walker);
-static bool __tcf_idr_check(struct tc_action_net *tn, u32 index,
- struct tc_action **a, int bind)
+int tcf_idr_search(struct tc_action_net *tn, struct tc_action **a, u32 index)
{
struct tcf_idrinfo *idrinfo = tn->idrinfo;
struct tc_action *p;
spin_lock(&idrinfo->lock);
p = idr_find(&idrinfo->action_idr, index);
- if (IS_ERR(p)) {
+ if (IS_ERR(p))
p = NULL;
- } else if (p) {
+ else if (p)
refcount_inc(&p->tcfa_refcnt);
- if (bind)
- atomic_inc(&p->tcfa_bindcnt);
- }
spin_unlock(&idrinfo->lock);
if (p) {
}
return false;
}
-
-int tcf_idr_search(struct tc_action_net *tn, struct tc_action **a, u32 index)
-{
- return __tcf_idr_check(tn, index, a, 0);
-}
EXPORT_SYMBOL(tcf_idr_search);
-bool tcf_idr_check(struct tc_action_net *tn, u32 index, struct tc_action **a,
- int bind)
+static int tcf_idr_delete_index(struct tcf_idrinfo *idrinfo, u32 index)
{
- return __tcf_idr_check(tn, index, a, bind);
-}
-EXPORT_SYMBOL(tcf_idr_check);
-
-int tcf_idr_delete_index(struct tc_action_net *tn, u32 index)
-{
- struct tcf_idrinfo *idrinfo = tn->idrinfo;
struct tc_action *p;
int ret = 0;
spin_unlock(&idrinfo->lock);
return ret;
}
-EXPORT_SYMBOL(tcf_idr_delete_index);
int tcf_idr_create(struct tc_action_net *tn, u32 index, struct nlattr *est,
struct tc_action **a, const struct tc_action_ops *ops,
p->idrinfo = idrinfo;
p->ops = ops;
- INIT_LIST_HEAD(&p->list);
*a = p;
return 0;
err3:
return __tcf_action_put(p, false);
}
+/* Put all actions in this array, skip those NULL's. */
static void tcf_action_put_many(struct tc_action *actions[])
{
int i;
- for (i = 0; i < TCA_ACT_MAX_PRIO && actions[i]; i++) {
+ for (i = 0; i < TCA_ACT_MAX_PRIO; i++) {
struct tc_action *a = actions[i];
- const struct tc_action_ops *ops = a->ops;
+ const struct tc_action_ops *ops;
+ if (!a)
+ continue;
+ ops = a->ops;
if (tcf_action_put(a))
module_put(ops->owner);
}
return err;
}
-static int tcf_action_delete(struct net *net, struct tc_action *actions[],
- int *acts_deleted, struct netlink_ext_ack *extack)
+static int tcf_action_delete(struct net *net, struct tc_action *actions[])
{
- u32 act_index;
- int ret, i;
+ int i;
for (i = 0; i < TCA_ACT_MAX_PRIO && actions[i]; i++) {
struct tc_action *a = actions[i];
const struct tc_action_ops *ops = a->ops;
-
/* Actions can be deleted concurrently so we must save their
* type and id to search again after reference is released.
*/
- act_index = a->tcfa_index;
+ struct tcf_idrinfo *idrinfo = a->idrinfo;
+ u32 act_index = a->tcfa_index;
if (tcf_action_put(a)) {
/* last reference, action was deleted concurrently */
module_put(ops->owner);
} else {
+ int ret;
+
/* now do the delete */
- ret = ops->delete(net, act_index);
- if (ret < 0) {
- *acts_deleted = i + 1;
+ ret = tcf_idr_delete_index(idrinfo, act_index);
+ if (ret < 0)
return ret;
- }
}
+ actions[i] = NULL;
}
- *acts_deleted = i;
return 0;
}
static int
tcf_del_notify(struct net *net, struct nlmsghdr *n, struct tc_action *actions[],
- int *acts_deleted, u32 portid, size_t attr_size,
- struct netlink_ext_ack *extack)
+ u32 portid, size_t attr_size, struct netlink_ext_ack *extack)
{
int ret;
struct sk_buff *skb;
}
/* now do the delete */
- ret = tcf_action_delete(net, actions, acts_deleted, extack);
+ ret = tcf_action_delete(net, actions);
if (ret < 0) {
NL_SET_ERR_MSG(extack, "Failed to delete TC action");
kfree_skb(skb);
struct nlattr *tb[TCA_ACT_MAX_PRIO + 1];
struct tc_action *act;
size_t attr_size = 0;
- struct tc_action *actions[TCA_ACT_MAX_PRIO + 1] = {};
- int acts_deleted = 0;
+ struct tc_action *actions[TCA_ACT_MAX_PRIO] = {};
ret = nla_parse_nested(tb, TCA_ACT_MAX_PRIO, nla, NULL, extack);
if (ret < 0)
if (event == RTM_GETACTION)
ret = tcf_get_notify(net, portid, n, actions, event, extack);
else { /* delete */
- ret = tcf_del_notify(net, n, actions, &acts_deleted, portid,
- attr_size, extack);
+ ret = tcf_del_notify(net, n, actions, portid, attr_size, extack);
if (ret)
goto err;
- return ret;
+ return 0;
}
err:
- tcf_action_put_many(&actions[acts_deleted]);
+ tcf_action_put_many(actions);
return ret;
}
return tcf_idr_search(tn, a, index);
}
-static int tcf_bpf_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, bpf_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_bpf_ops __read_mostly = {
.kind = "bpf",
.type = TCA_ACT_BPF,
.init = tcf_bpf_init,
.walk = tcf_bpf_walker,
.lookup = tcf_bpf_search,
- .delete = tcf_bpf_delete,
.size = sizeof(struct tcf_bpf),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_connmark_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, connmark_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_connmark_ops = {
.kind = "connmark",
.type = TCA_ACT_CONNMARK,
.init = tcf_connmark_init,
.walk = tcf_connmark_walker,
.lookup = tcf_connmark_search,
- .delete = tcf_connmark_delete,
.size = sizeof(struct tcf_connmark_info),
};
return nla_total_size(sizeof(struct tc_csum));
}
-static int tcf_csum_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, csum_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_csum_ops = {
.kind = "csum",
.type = TCA_ACT_CSUM,
.walk = tcf_csum_walker,
.lookup = tcf_csum_search,
.get_fill_size = tcf_csum_get_fill_size,
- .delete = tcf_csum_delete,
.size = sizeof(struct tcf_csum),
};
return sz;
}
-static int tcf_gact_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, gact_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_gact_ops = {
.kind = "gact",
.type = TCA_ACT_GACT,
.walk = tcf_gact_walker,
.lookup = tcf_gact_search,
.get_fill_size = tcf_gact_get_fill_size,
- .delete = tcf_gact_delete,
.size = sizeof(struct tcf_gact),
};
{
struct tcf_meta_ops *o;
- read_lock_bh(&ife_mod_lock);
+ read_lock(&ife_mod_lock);
list_for_each_entry(o, &ifeoplist, list) {
if (o->metaid == metaid) {
if (!try_module_get(o->owner))
o = NULL;
- read_unlock_bh(&ife_mod_lock);
+ read_unlock(&ife_mod_lock);
return o;
}
}
- read_unlock_bh(&ife_mod_lock);
+ read_unlock(&ife_mod_lock);
return NULL;
}
!mops->get || !mops->alloc)
return -EINVAL;
- write_lock_bh(&ife_mod_lock);
+ write_lock(&ife_mod_lock);
list_for_each_entry(m, &ifeoplist, list) {
if (m->metaid == mops->metaid ||
(strcmp(mops->name, m->name) == 0)) {
- write_unlock_bh(&ife_mod_lock);
+ write_unlock(&ife_mod_lock);
return -EEXIST;
}
}
mops->release = ife_release_meta_gen;
list_add_tail(&mops->list, &ifeoplist);
- write_unlock_bh(&ife_mod_lock);
+ write_unlock(&ife_mod_lock);
return 0;
}
EXPORT_SYMBOL_GPL(unregister_ife_op);
struct tcf_meta_ops *m;
int err = -ENOENT;
- write_lock_bh(&ife_mod_lock);
+ write_lock(&ife_mod_lock);
list_for_each_entry(m, &ifeoplist, list) {
if (m->metaid == mops->metaid) {
list_del(&mops->list);
break;
}
}
- write_unlock_bh(&ife_mod_lock);
+ write_unlock(&ife_mod_lock);
return err;
}
#endif
/* called when adding new meta information
- * under ife->tcf_lock for existing action
*/
-static int load_metaops_and_vet(struct tcf_ife_info *ife, u32 metaid,
- void *val, int len, bool exists,
- bool rtnl_held)
+static int load_metaops_and_vet(u32 metaid, void *val, int len, bool rtnl_held)
{
struct tcf_meta_ops *ops = find_ife_oplist(metaid);
int ret = 0;
if (!ops) {
ret = -ENOENT;
#ifdef CONFIG_MODULES
- if (exists)
- spin_unlock_bh(&ife->tcf_lock);
if (rtnl_held)
rtnl_unlock();
request_module("ife-meta-%s", ife_meta_id2name(metaid));
if (rtnl_held)
rtnl_lock();
- if (exists)
- spin_lock_bh(&ife->tcf_lock);
ops = find_ife_oplist(metaid);
#endif
}
}
/* called when adding new meta information
- * under ife->tcf_lock for existing action
*/
-static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval,
- int len, bool atomic)
+static int __add_metainfo(const struct tcf_meta_ops *ops,
+ struct tcf_ife_info *ife, u32 metaid, void *metaval,
+ int len, bool atomic, bool exists)
{
struct tcf_meta_info *mi = NULL;
- struct tcf_meta_ops *ops = find_ife_oplist(metaid);
int ret = 0;
- if (!ops)
- return -ENOENT;
-
mi = kzalloc(sizeof(*mi), atomic ? GFP_ATOMIC : GFP_KERNEL);
- if (!mi) {
- /*put back what find_ife_oplist took */
- module_put(ops->owner);
+ if (!mi)
return -ENOMEM;
- }
mi->metaid = metaid;
mi->ops = ops;
ret = ops->alloc(mi, metaval, atomic ? GFP_ATOMIC : GFP_KERNEL);
if (ret != 0) {
kfree(mi);
- module_put(ops->owner);
return ret;
}
}
+ if (exists)
+ spin_lock_bh(&ife->tcf_lock);
list_add_tail(&mi->metalist, &ife->metalist);
+ if (exists)
+ spin_unlock_bh(&ife->tcf_lock);
+
+ return ret;
+}
+
+static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval,
+ int len, bool exists)
+{
+ const struct tcf_meta_ops *ops = find_ife_oplist(metaid);
+ int ret;
+ if (!ops)
+ return -ENOENT;
+ ret = __add_metainfo(ops, ife, metaid, metaval, len, false, exists);
+ if (ret)
+ /*put back what find_ife_oplist took */
+ module_put(ops->owner);
return ret;
}
-static int use_all_metadata(struct tcf_ife_info *ife)
+static int use_all_metadata(struct tcf_ife_info *ife, bool exists)
{
struct tcf_meta_ops *o;
int rc = 0;
int installed = 0;
- read_lock_bh(&ife_mod_lock);
+ read_lock(&ife_mod_lock);
list_for_each_entry(o, &ifeoplist, list) {
- rc = add_metainfo(ife, o->metaid, NULL, 0, true);
+ rc = __add_metainfo(o, ife, o->metaid, NULL, 0, true, exists);
if (rc == 0)
installed += 1;
}
- read_unlock_bh(&ife_mod_lock);
+ read_unlock(&ife_mod_lock);
if (installed)
return 0;
kfree_rcu(p, rcu);
}
-/* under ife->tcf_lock for existing action */
static int populate_metalist(struct tcf_ife_info *ife, struct nlattr **tb,
bool exists, bool rtnl_held)
{
val = nla_data(tb[i]);
len = nla_len(tb[i]);
- rc = load_metaops_and_vet(ife, i, val, len, exists,
- rtnl_held);
+ rc = load_metaops_and_vet(i, val, len, rtnl_held);
if (rc != 0)
return rc;
p->eth_type = ife_type;
}
- if (exists)
- spin_lock_bh(&ife->tcf_lock);
if (ret == ACT_P_CREATED)
INIT_LIST_HEAD(&ife->metalist);
NULL, NULL);
if (err) {
metadata_parse_err:
- if (exists)
- spin_unlock_bh(&ife->tcf_lock);
tcf_idr_release(*a, bind);
-
kfree(p);
return err;
}
* as we can. You better have at least one else we are
* going to bail out
*/
- err = use_all_metadata(ife);
+ err = use_all_metadata(ife, exists);
if (err) {
- if (exists)
- spin_unlock_bh(&ife->tcf_lock);
tcf_idr_release(*a, bind);
-
kfree(p);
return err;
}
}
+ if (exists)
+ spin_lock_bh(&ife->tcf_lock);
ife->tcf_action = parm->action;
/* protected by tcf_lock when modifying existing action */
rcu_swap_protected(ife->params, p, 1);
return tcf_idr_search(tn, a, index);
}
-static int tcf_ife_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, ife_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_ife_ops = {
.kind = "ife",
.type = TCA_ACT_IFE,
.init = tcf_ife_init,
.walk = tcf_ife_walker,
.lookup = tcf_ife_search,
- .delete = tcf_ife_delete,
.size = sizeof(struct tcf_ife_info),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_ipt_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, ipt_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_ipt_ops = {
.kind = "ipt",
.type = TCA_ACT_IPT,
.init = tcf_ipt_init,
.walk = tcf_ipt_walker,
.lookup = tcf_ipt_search,
- .delete = tcf_ipt_delete,
.size = sizeof(struct tcf_ipt),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_xt_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, xt_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_xt_ops = {
.kind = "xt",
.type = TCA_ACT_XT,
.init = tcf_xt_init,
.walk = tcf_xt_walker,
.lookup = tcf_xt_search,
- .delete = tcf_xt_delete,
.size = sizeof(struct tcf_ipt),
};
dev_put(dev);
}
-static int tcf_mirred_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, mirred_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_mirred_ops = {
.kind = "mirred",
.type = TCA_ACT_MIRRED,
.size = sizeof(struct tcf_mirred),
.get_dev = tcf_mirred_get_dev,
.put_dev = tcf_mirred_put_dev,
- .delete = tcf_mirred_delete,
};
static __net_init int mirred_init_net(struct net *net)
return tcf_idr_search(tn, a, index);
}
-static int tcf_nat_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, nat_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_nat_ops = {
.kind = "nat",
.type = TCA_ACT_NAT,
.init = tcf_nat_init,
.walk = tcf_nat_walker,
.lookup = tcf_nat_search,
- .delete = tcf_nat_delete,
.size = sizeof(struct tcf_nat),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_pedit_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, pedit_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_pedit_ops = {
.kind = "pedit",
.type = TCA_ACT_PEDIT,
.init = tcf_pedit_init,
.walk = tcf_pedit_walker,
.lookup = tcf_pedit_search,
- .delete = tcf_pedit_delete,
.size = sizeof(struct tcf_pedit),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_police_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, police_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
MODULE_AUTHOR("Alexey Kuznetsov");
MODULE_DESCRIPTION("Policing actions");
MODULE_LICENSE("GPL");
.init = tcf_police_init,
.walk = tcf_police_walker,
.lookup = tcf_police_search,
- .delete = tcf_police_delete,
.size = sizeof(struct tcf_police),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_sample_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, sample_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_sample_ops = {
.kind = "sample",
.type = TCA_ACT_SAMPLE,
.cleanup = tcf_sample_cleanup,
.walk = tcf_sample_walker,
.lookup = tcf_sample_search,
- .delete = tcf_sample_delete,
.size = sizeof(struct tcf_sample),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_simp_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, simp_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_simp_ops = {
.kind = "simple",
.type = TCA_ACT_SIMP,
.init = tcf_simp_init,
.walk = tcf_simp_walker,
.lookup = tcf_simp_search,
- .delete = tcf_simp_delete,
.size = sizeof(struct tcf_defact),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_skbedit_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, skbedit_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_skbedit_ops = {
.kind = "skbedit",
.type = TCA_ACT_SKBEDIT,
.cleanup = tcf_skbedit_cleanup,
.walk = tcf_skbedit_walker,
.lookup = tcf_skbedit_search,
- .delete = tcf_skbedit_delete,
.size = sizeof(struct tcf_skbedit),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_skbmod_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, skbmod_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_skbmod_ops = {
.kind = "skbmod",
.type = TCA_ACT_SKBMOD,
.cleanup = tcf_skbmod_cleanup,
.walk = tcf_skbmod_walker,
.lookup = tcf_skbmod_search,
- .delete = tcf_skbmod_delete,
.size = sizeof(struct tcf_skbmod),
};
return tcf_idr_search(tn, a, index);
}
-static int tunnel_key_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, tunnel_key_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_tunnel_key_ops = {
.kind = "tunnel_key",
.type = TCA_ACT_TUNNEL_KEY,
.cleanup = tunnel_key_release,
.walk = tunnel_key_walker,
.lookup = tunnel_key_search,
- .delete = tunnel_key_delete,
.size = sizeof(struct tcf_tunnel_key),
};
return tcf_idr_search(tn, a, index);
}
-static int tcf_vlan_delete(struct net *net, u32 index)
-{
- struct tc_action_net *tn = net_generic(net, vlan_net_id);
-
- return tcf_idr_delete_index(tn, index);
-}
-
static struct tc_action_ops act_vlan_ops = {
.kind = "vlan",
.type = TCA_ACT_VLAN,
.cleanup = tcf_vlan_cleanup,
.walk = tcf_vlan_walker,
.lookup = tcf_vlan_search,
- .delete = tcf_vlan_delete,
.size = sizeof(struct tcf_vlan),
};
struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_U32_MAX + 1];
u32 htid, flags = 0;
+ size_t sel_size;
int err;
#ifdef CONFIG_CLS_U32_PERF
size_t size;
}
s = nla_data(tb[TCA_U32_SEL]);
+ sel_size = struct_size(s, keys, s->nkeys);
+ if (nla_len(tb[TCA_U32_SEL]) < sel_size) {
+ err = -EINVAL;
+ goto erridr;
+ }
- n = kzalloc(sizeof(*n) + s->nkeys*sizeof(struct tc_u32_key), GFP_KERNEL);
+ n = kzalloc(offsetof(typeof(*n), sel) + sel_size, GFP_KERNEL);
if (n == NULL) {
err = -ENOBUFS;
goto erridr;
}
#endif
- memcpy(&n->sel, s, sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key));
+ memcpy(&n->sel, s, sel_size);
RCU_INIT_POINTER(n->ht_up, ht);
n->handle = handle;
n->fshift = s->hmask ? ffs(ntohl(s->hmask)) - 1 : 0;
#include <linux/vmalloc.h>
#include <linux/reciprocal_div.h>
#include <net/netlink.h>
-#include <linux/version.h>
#include <linux/if_vlan.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
}
static u32 cake_hash(struct cake_tin_data *q, const struct sk_buff *skb,
- int flow_mode)
+ int flow_mode, u16 flow_override, u16 host_override)
{
- u32 flow_hash = 0, srchost_hash, dsthost_hash;
+ u32 flow_hash = 0, srchost_hash = 0, dsthost_hash = 0;
u16 reduced_hash, srchost_idx, dsthost_idx;
struct flow_keys keys, host_keys;
if (unlikely(flow_mode == CAKE_FLOW_NONE))
return 0;
+ /* If both overrides are set we can skip packet dissection entirely */
+ if ((flow_override || !(flow_mode & CAKE_FLOW_FLOWS)) &&
+ (host_override || !(flow_mode & CAKE_FLOW_HOSTS)))
+ goto skip_hash;
+
skb_flow_dissect_flow_keys(skb, &keys,
FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL);
if (flow_mode & CAKE_FLOW_FLOWS)
flow_hash = flow_hash_from_keys(&keys);
+skip_hash:
+ if (flow_override)
+ flow_hash = flow_override - 1;
+ if (host_override) {
+ dsthost_hash = host_override - 1;
+ srchost_hash = host_override - 1;
+ }
+
if (!(flow_mode & CAKE_FLOW_FLOWS)) {
if (flow_mode & CAKE_FLOW_SRC_IP)
flow_hash ^= srchost_hash;
struct cake_sched_data *q = qdisc_priv(sch);
struct tcf_proto *filter;
struct tcf_result res;
- u32 flow = 0;
+ u16 flow = 0, host = 0;
int result;
filter = rcu_dereference_bh(q->filter_list);
#endif
if (TC_H_MIN(res.classid) <= CAKE_QUEUES)
flow = TC_H_MIN(res.classid);
+ if (TC_H_MAJ(res.classid) <= (CAKE_QUEUES << 16))
+ host = TC_H_MAJ(res.classid) >> 16;
}
hash:
*t = cake_select_tin(sch, skb);
- return flow ?: cake_hash(*t, skb, flow_mode) + 1;
+ return cake_hash(*t, skb, flow_mode, flow, host) + 1;
}
static void cake_reconfigure(struct Qdisc *sch);
{
struct tls_context *ctx = tls_get_ctx(sk);
- /* We are already sending pages, ignore notification */
- if (ctx->in_tcp_sendpages)
+ /* If in_tcp_sendpages call lower protocol write space handler
+ * to ensure we wake up any waiting operations there. For example
+ * if do_tcp_sendpages where to call sk_wait_event.
+ */
+ if (ctx->in_tcp_sendpages) {
+ ctx->sk_write_space(sk);
return;
+ }
if (!sk->sk_write_pending && tls_is_pending_closed_record(ctx)) {
gfp_t sk_allocation = sk->sk_allocation;
return 0;
if (!dev->netdev_ops->ndo_bpf || !dev->netdev_ops->ndo_xsk_async_xmit)
- return force_zc ? -ENOTSUPP : 0; /* fail or fallback */
+ return force_zc ? -EOPNOTSUPP : 0; /* fail or fallback */
bpf.command = XDP_QUERY_XSK_UMEM;
rtnl_lock();
err = xdp_umem_query(dev, queue_id);
if (err) {
- err = err < 0 ? -ENOTSUPP : -EBUSY;
+ err = err < 0 ? -EOPNOTSUPP : -EBUSY;
goto err_rtnl_unlock;
}
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4))
-# cc-if-fullversion
-# Usage: EXTRA_CFLAGS += $(call cc-if-fullversion, -lt, 040502, -O1)
-cc-if-fullversion = $(shell [ $(cc-fullversion) $(1) $(2) ] && echo $(3) || echo $(4))
-
# cc-ldoption
# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
cc-ldoption = $(call try-run,\
endif
ifdef CONFIG_GCOV_KERNEL
objtool_args += --no-unreachable
-else
-objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
endif
ifdef CONFIG_RETPOLINE
ifneq ($(RETPOLINE_CFLAGS),)
}
while (argc) {
- if (argc < 2)
+ if (argc < 2) {
BAD_ARG();
+ goto err_close_map;
+ }
if (is_prefix(*argv, "cpu")) {
char *endptr;
NEXT_ARG();
} else {
BAD_ARG();
+ goto err_close_map;
}
do_all = false;
projects / mirror_ubuntu-focal-kernel.git / commitdiff