]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/commitdiff
mac80211: handle operating mode notif in beacon/assoc response
authorJohannes Berg <johannes.berg@intel.com>
Thu, 7 Feb 2013 21:24:55 +0000 (22:24 +0100)
committerJohannes Berg <johannes.berg@intel.com>
Fri, 15 Feb 2013 08:41:34 +0000 (09:41 +0100)
In beacons and association response frames an AP may include an
operating mode notification element to advertise changes in the
number of spatial streams it can receive. Handle this using the
existing function that handles the action frame, but only handle
NSS changes, not bandwidth changes which aren't allowed here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net/mac80211/ieee80211_i.h
net/mac80211/mlme.c
net/mac80211/rx.c
net/mac80211/util.c
net/mac80211/vht.c

index 4947c91c6c860e00c6f7b9c70b471738ff4436d6..892bac64a189d058d9344fd9a447ae3307b5b03b 100644 (file)
@@ -1197,6 +1197,7 @@ struct ieee802_11_elems {
        u8 *pwr_constr_elem;
        u8 *quiet_elem; /* first quite element */
        u8 *timeout_int;
+       u8 *opmode_notif;
 
        /* length of them, respectively */
        u8 ssid_len;
@@ -1435,7 +1436,7 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
 void ieee80211_sta_set_rx_nss(struct sta_info *sta);
 void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
                                 struct sta_info *sta, u8 opmode,
-                                enum ieee80211_band band);
+                                enum ieee80211_band band, bool nss_only);
 
 /* Spectrum management */
 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
index e6da6bf8cc271b9c5e9c461ea6e533638fdc0a00..f2c6f7794f3503841798c2e78722cc3ef6ab9409 100644 (file)
@@ -2217,6 +2217,21 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
                                                  elems.ht_operation,
                                                  cbss->bssid, false);
 
+       /*
+        * If an operating mode notification IE is present, override the
+        * NSS calculation (that would be done in rate_control_rate_init())
+        * and use the # of streams from that element.
+        */
+       if (elems.opmode_notif &&
+           !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
+               u8 nss;
+
+               nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
+               nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
+               nss += 1;
+               sta->sta.rx_nss = nss;
+       }
+
        rate_control_rate_init(sta);
 
        if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
@@ -2489,6 +2504,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
        struct ieee80211_local *local = sdata->local;
        struct ieee80211_chanctx_conf *chanctx_conf;
        struct ieee80211_channel *chan;
+       struct sta_info *sta;
        u32 changed = 0;
        bool erp_valid;
        u8 erp_value = 0;
@@ -2728,14 +2744,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
                        le16_to_cpu(mgmt->u.beacon.capab_info),
                        erp_valid, erp_value);
 
-
        mutex_lock(&local->sta_mtx);
+       sta = sta_info_get(sdata, bssid);
+
        if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param &&
            !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
-               changed |= ieee80211_config_ht_tx(sdata,
-                                                 sta_info_get(sdata, bssid),
+               changed |= ieee80211_config_ht_tx(sdata, sta,
                                                  elems.ht_operation,
                                                  bssid, true);
+
+       if (sta && elems.opmode_notif)
+               ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
+                                           rx_status->band, true);
        mutex_unlock(&local->sta_mtx);
 
        if (elems.country_elem && elems.pwr_constr_elem &&
index 1617e0bd4ca6a750e0f23f8fb5051bb53c468e48..30f1ba6de8f3e43ef0967d35100e5da285f37702 100644 (file)
@@ -2459,7 +2459,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
                        opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
 
                        ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
-                                                   opmode, status->band);
+                                                   opmode, status->band,
+                                                   false);
                        goto handled;
                }
                default:
index b231bc2ed740a40c38f1418370d35b33c8e76b24..e24ff38606a95d0228629d62fc2d183c57a6976d 100644 (file)
@@ -787,6 +787,12 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
                        else
                                elem_parse_failed = true;
                        break;
+               case WLAN_EID_OPMODE_NOTIF:
+                       if (elen > 0)
+                               elems->opmode_notif = pos;
+                       else
+                               elem_parse_failed = true;
+                       break;
                case WLAN_EID_MESH_ID:
                        elems->mesh_id = pos;
                        elems->mesh_id_len = elen;
index 0951f74e7ff5a933b1866263822fcb21c12d8ad8..a9549fcc5a049696d394c0bdcb575b87bac5d05f 100644 (file)
@@ -141,7 +141,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta)
 
 void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
                                 struct sta_info *sta, u8 opmode,
-                                enum ieee80211_band band)
+                                enum ieee80211_band band, bool nss_only)
 {
        struct ieee80211_local *local = sdata->local;
        struct ieee80211_supported_band *sband;
@@ -164,6 +164,9 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
                changed |= IEEE80211_RC_NSS_CHANGED;
        }
 
+       if (nss_only)
+               goto change;
+
        switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
        case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
                sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
@@ -185,6 +188,7 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
                changed |= IEEE80211_RC_NSS_CHANGED;
        }
 
+ change:
        if (changed)
                rate_control_rate_update(local, sband, sta, changed);
 }