u8 do_nap;
u8 napped[MAX_SMT_THREADS];
struct kvmppc_vcore *vc[MAX_SUBCORES];
+ /* Bits for changing lpcr on P9 */
+ unsigned long lpcr_req;
+ unsigned long lpidr_req;
+ unsigned long host_lpcr;
+ u32 do_set;
+ u32 do_restore;
+ union {
+ u32 allphases;
+ u8 phase[4];
+ } lpcr_sync;
};
/*
u8 hwthread_req;
u8 hwthread_state;
u8 host_ipi;
- u8 ptid;
+ u8 ptid; /* thread number within subcore when split */
+ u8 tid; /* thread number within whole core */
struct kvm_vcpu *kvm_vcpu;
struct kvmppc_vcore *kvm_vcore;
void __iomem *xics_phys;
HSTATE_FIELD(HSTATE_SAVED_XIRR, saved_xirr);
HSTATE_FIELD(HSTATE_HOST_IPI, host_ipi);
HSTATE_FIELD(HSTATE_PTID, ptid);
+ HSTATE_FIELD(HSTATE_TID, tid);
HSTATE_FIELD(HSTATE_MMCR0, host_mmcr[0]);
HSTATE_FIELD(HSTATE_MMCR1, host_mmcr[1]);
HSTATE_FIELD(HSTATE_MMCRA, host_mmcr[2]);
OFFSET(KVM_SPLIT_LDBAR, kvm_split_mode, ldbar);
OFFSET(KVM_SPLIT_DO_NAP, kvm_split_mode, do_nap);
OFFSET(KVM_SPLIT_NAPPED, kvm_split_mode, napped);
+ OFFSET(KVM_SPLIT_DO_SET, kvm_split_mode, do_set);
+ OFFSET(KVM_SPLIT_DO_RESTORE, kvm_split_mode, do_restore);
#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
#ifdef CONFIG_PPC_BOOK3S_64
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
return false;
+ /* POWER9 currently requires all threads to be in the same MMU mode */
+ if (cpu_has_feature(CPU_FTR_ARCH_300) &&
+ kvm_is_radix(vc->kvm) != kvm_is_radix(cip->vc[0]->kvm))
+ return false;
+
if (n_threads < cip->max_subcore_threads)
n_threads = cip->max_subcore_threads;
if (!subcore_config_ok(cip->n_subcores + 1, n_threads))
for_each_runnable_thread(i, vcpu, vc) {
if (signal_pending(vcpu->arch.run_task))
vcpu->arch.ret = -EINTR;
- else if (kvm_is_radix(vc->kvm) != radix_enabled())
- /* can't actually run HPT guest on radix host yet... */
- vcpu->arch.ret = -EINVAL;
else if (vcpu->arch.vpa.update_pending ||
vcpu->arch.slb_shadow.update_pending ||
vcpu->arch.dtl.update_pending)
int controlled_threads;
int trap;
bool is_power8;
+ bool hpt_on_radix;
/*
* Remove from the list any threads that have a signal pending
* Make sure we are running on primary threads, and that secondary
* threads are offline. Also check if the number of threads in this
* guest are greater than the current system threads per guest.
+ * On POWER9, we need to be not in independent-threads mode if
+ * this is a HPT guest on a radix host.
*/
- if ((controlled_threads > 1) &&
- ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
+ hpt_on_radix = radix_enabled() && !kvm_is_radix(vc->kvm);
+ if (((controlled_threads > 1) &&
+ ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) ||
+ (hpt_on_radix && vc->kvm->arch.threads_indep)) {
for_each_runnable_thread(i, vcpu, vc) {
vcpu->arch.ret = -EBUSY;
kvmppc_remove_runnable(vc, vcpu);
is_power8 = cpu_has_feature(CPU_FTR_ARCH_207S)
&& !cpu_has_feature(CPU_FTR_ARCH_300);
- if (split > 1) {
+ if (split > 1 || hpt_on_radix) {
sip = &split_info;
memset(&split_info, 0, sizeof(split_info));
for (sub = 0; sub < core_info.n_subcores; ++sub)
split_info.subcore_size = subcore_size;
} else {
split_info.subcore_size = 1;
+ if (hpt_on_radix) {
+ /* Use the split_info for LPCR/LPIDR changes */
+ split_info.lpcr_req = vc->lpcr;
+ split_info.lpidr_req = vc->kvm->arch.lpid;
+ split_info.host_lpcr = vc->kvm->arch.host_lpcr;
+ split_info.do_set = 1;
+ }
}
/* order writes to split_info before kvm_split_mode pointer */
smp_wmb();
}
- for (thr = 0; thr < controlled_threads; ++thr)
+
+ for (thr = 0; thr < controlled_threads; ++thr) {
+ paca[pcpu + thr].kvm_hstate.tid = thr;
+ paca[pcpu + thr].kvm_hstate.napping = 0;
paca[pcpu + thr].kvm_hstate.kvm_split_mode = sip;
+ }
/* Initiate micro-threading (split-core) on POWER8 if required */
if (cmd_bit) {
* When doing micro-threading, poke the inactive threads as well.
* This gets them to the nap instruction after kvm_do_nap,
* which reduces the time taken to unsplit later.
+ * For POWER9 HPT guest on radix host, we need all the secondary
+ * threads woken up so they can do the LPCR/LPIDR change.
*/
- if (cmd_bit) {
+ if (cmd_bit || hpt_on_radix) {
split_info.do_nap = 1; /* ask secondaries to nap when done */
for (thr = 1; thr < threads_per_subcore; ++thr)
if (!(active & (1 << thr)))
cpu_relax();
++loops;
}
- split_info.do_nap = 0;
+ } else if (hpt_on_radix) {
+ /* Wait for all threads to have seen final sync */
+ for (thr = 1; thr < controlled_threads; ++thr) {
+ while (paca[pcpu + thr].kvm_hstate.kvm_split_mode) {
+ HMT_low();
+ barrier();
+ }
+ HMT_medium();
+ }
}
+ split_info.do_nap = 0;
kvmppc_set_host_core(pcpu);
struct kvmppc_vcore *vc = local_paca->kvm_hstate.kvm_vcore;
int ptid = local_paca->kvm_hstate.ptid;
struct kvm_split_mode *sip = local_paca->kvm_hstate.kvm_split_mode;
- int me, ee, i;
+ int me, ee, i, t;
+ int cpu0;
/* Set our bit in the threads-exiting-guest map in the 0xff00
bits of vcore->entry_exit_map */
if ((ee >> 8) == 0)
kvmhv_interrupt_vcore(vc, ee);
}
+
+ /*
+ * On POWER9 when running a HPT guest on a radix host (sip != NULL),
+ * we have to interrupt inactive CPU threads to get them to
+ * restore the host LPCR value.
+ */
+ if (sip->lpcr_req) {
+ if (cmpxchg(&sip->do_restore, 0, 1) == 0) {
+ vc = local_paca->kvm_hstate.kvm_vcore;
+ cpu0 = vc->pcpu + ptid - local_paca->kvm_hstate.tid;
+ for (t = 1; t < threads_per_core; ++t) {
+ if (sip->napped[t])
+ kvmhv_rm_send_ipi(cpu0 + t);
+ }
+ }
+ }
}
struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv;
die("Bad interrupt in KVM entry/exit code", regs, SIGABRT);
panic("Bad KVM trap");
}
+
+/*
+ * Functions used to switch LPCR HR and UPRT bits on all threads
+ * when entering and exiting HPT guests on a radix host.
+ */
+
+#define PHASE_REALMODE 1 /* in real mode */
+#define PHASE_SET_LPCR 2 /* have set LPCR */
+#define PHASE_OUT_OF_GUEST 4 /* have finished executing in guest */
+#define PHASE_RESET_LPCR 8 /* have reset LPCR to host value */
+
+#define ALL(p) (((p) << 24) | ((p) << 16) | ((p) << 8) | (p))
+
+static void wait_for_sync(struct kvm_split_mode *sip, int phase)
+{
+ int thr = local_paca->kvm_hstate.tid;
+
+ sip->lpcr_sync.phase[thr] |= phase;
+ phase = ALL(phase);
+ while ((sip->lpcr_sync.allphases & phase) != phase) {
+ HMT_low();
+ barrier();
+ }
+ HMT_medium();
+}
+
+void kvmhv_p9_set_lpcr(struct kvm_split_mode *sip)
+{
+ unsigned long rb, set;
+
+ /* wait for every other thread to get to real mode */
+ wait_for_sync(sip, PHASE_REALMODE);
+
+ /* Set LPCR and LPIDR */
+ mtspr(SPRN_LPCR, sip->lpcr_req);
+ mtspr(SPRN_LPID, sip->lpidr_req);
+ isync();
+
+ /* Invalidate the TLB on thread 0 */
+ if (local_paca->kvm_hstate.tid == 0) {
+ sip->do_set = 0;
+ asm volatile("ptesync" : : : "memory");
+ for (set = 0; set < POWER9_TLB_SETS_RADIX; ++set) {
+ rb = TLBIEL_INVAL_SET_LPID +
+ (set << TLBIEL_INVAL_SET_SHIFT);
+ asm volatile(PPC_TLBIEL(%0, %1, 0, 0, 0) : :
+ "r" (rb), "r" (0));
+ }
+ asm volatile("ptesync" : : : "memory");
+ }
+
+ /* indicate that we have done so and wait for others */
+ wait_for_sync(sip, PHASE_SET_LPCR);
+ /* order read of sip->lpcr_sync.allphases vs. sip->do_set */
+ smp_rmb();
+}
+
+/*
+ * Called when a thread that has been in the guest needs
+ * to reload the host LPCR value - but only on POWER9 when
+ * running a HPT guest on a radix host.
+ */
+void kvmhv_p9_restore_lpcr(struct kvm_split_mode *sip)
+{
+ /* we're out of the guest... */
+ wait_for_sync(sip, PHASE_OUT_OF_GUEST);
+
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_LPCR, sip->host_lpcr);
+ isync();
+
+ if (local_paca->kvm_hstate.tid == 0) {
+ sip->do_restore = 0;
+ smp_wmb(); /* order store of do_restore vs. phase */
+ }
+
+ wait_for_sync(sip, PHASE_RESET_LPCR);
+ smp_mb();
+ local_paca->kvm_hstate.kvm_split_mode = NULL;
+}
RFI
kvmppc_call_hv_entry:
+BEGIN_FTR_SECTION
+ /* On P9, do LPCR setting, if necessary */
+ ld r3, HSTATE_SPLIT_MODE(r13)
+ cmpdi r3, 0
+ beq 46f
+ lwz r4, KVM_SPLIT_DO_SET(r3)
+ cmpwi r4, 0
+ beq 46f
+ bl kvmhv_p9_set_lpcr
+ nop
+46:
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
ld r4, HSTATE_KVM_VCPU(r13)
bl kvmppc_hv_entry
ld r6, 0(r6)
mtspr SPRN_HDEC, r6
/* and set per-LPAR registers, if doing dynamic micro-threading */
-BEGIN_FTR_SECTION
ld r6, HSTATE_SPLIT_MODE(r13)
cmpdi r6, 0
beq 63f
+BEGIN_FTR_SECTION
ld r0, KVM_SPLIT_RPR(r6)
mtspr SPRN_RPR, r0
ld r0, KVM_SPLIT_PMMAR(r6)
ld r0, KVM_SPLIT_LDBAR(r6)
mtspr SPRN_LDBAR, r0
isync
-END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
+FTR_SECTION_ELSE
+ /* On P9 we use the split_info for coordinating LPCR changes */
+ lwz r4, KVM_SPLIT_DO_SET(r6)
+ cmpwi r4, 0
+ beq 63f
+ mr r3, r6
+ bl kvmhv_p9_set_lpcr
+ nop
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
63:
/* Order load of vcpu after load of vcore */
lwsync
ld r3, HSTATE_SPLIT_MODE(r13)
cmpdi r3, 0
beq kvm_no_guest
+ lwz r0, KVM_SPLIT_DO_SET(r3)
+ cmpwi r0, 0
+ bne kvmhv_do_set
+ lwz r0, KVM_SPLIT_DO_RESTORE(r3)
+ cmpwi r0, 0
+ bne kvmhv_do_restore
lbz r0, KVM_SPLIT_DO_NAP(r3)
cmpwi r0, 0
beq kvm_no_guest
stb r0, HSTATE_HWTHREAD_STATE(r13)
b kvm_no_guest
+kvmhv_do_set:
+ /* Set LPCR, LPIDR etc. on P9 */
+ HMT_MEDIUM
+ bl kvmhv_p9_set_lpcr
+ nop
+ b kvm_no_guest
+
+kvmhv_do_restore:
+ HMT_MEDIUM
+ bl kvmhv_p9_restore_lpcr
+ nop
+ b kvm_no_guest
+
/*
* Here the primary thread is trying to return the core to
* whole-core mode, so we need to nap.
/* Set kvm_split_mode.napped[tid] = 1 */
ld r3, HSTATE_SPLIT_MODE(r13)
li r0, 1
- lhz r4, PACAPACAINDEX(r13)
- clrldi r4, r4, 61 /* micro-threading => P8 => 8 threads/core */
+ lbz r4, HSTATE_TID(r13)
addi r4, r4, KVM_SPLIT_NAPPED
stbx r0, r3, r4
/* Check the do_nap flag again after setting napped[] */
19: lis r8,0x7fff /* MAX_INT@h */
mtspr SPRN_HDEC,r8
-16: ld r8,KVM_HOST_LPCR(r4)
+16:
+BEGIN_FTR_SECTION
+ /* On POWER9 with HPT-on-radix we need to wait for all other threads */
+ ld r3, HSTATE_SPLIT_MODE(r13)
+ cmpdi r3, 0
+ beq 47f
+ lwz r8, KVM_SPLIT_DO_RESTORE(r3)
+ cmpwi r8, 0
+ beq 47f
+ stw r12, STACK_SLOT_TRAP(r1)
+ bl kvmhv_p9_restore_lpcr
+ nop
+ lwz r12, STACK_SLOT_TRAP(r1)
+ b 48f
+47:
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+ ld r8,KVM_HOST_LPCR(r4)
mtspr SPRN_LPCR,r8
isync
-
+48:
/* load host SLB entries */
BEGIN_MMU_FTR_SECTION
b 0f
projects / mirror_ubuntu-bionic-kernel.git / commitdiff