image-$(CONFIG_TQM8548) += cuImage.tqm8548
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
-image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/86xx/Kconfig
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Configured for booting off the alternate (64MB SODIMM) flash.
- * Requires switching JP12 jumpers and changing SW2.8 setting.
- *
- * Copyright 2013 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
- localbus@e0000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- reg = <0xe0000000 0x5000>;
- interrupt-parent = <&mpic>;
-
- ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/
- 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
- 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
- 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
- 0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x04000000>;
- compatible = "intel,JS28F128", "cfi-flash";
- bank-width = <4>;
- device-width = <1>;
- partition@0 {
- label = "space";
- /* FC000000 -> FFEFFFFF */
- reg = <0x00000000 0x03f00000>;
- };
- partition@3f00000 {
- label = "bootloader";
- /* FFF00000 -> FFFFFFFF */
- reg = <0x03f00000 0x00100000>;
- read-only;
- };
- };
-
-
- epld@5,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x5 0x0 0x00b10000>;
- ranges = <
- 0x0 0x0 0x5 0x000000 0x1fff /* LED */
- 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
- 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
- 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
- >;
-
- led@0,0 {
- compatible = "led";
- reg = <0x0 0x0 0x1fff>;
- };
-
- switches@1,0 {
- compatible = "switches";
- reg = <0x1 0x0 0x1fff>;
- };
-
- hw-rev@3,0 {
- compatible = "hw-rev";
- reg = <0x3 0x0 0x1fff>;
- };
-
- eeprom@b,0 {
- compatible = "eeprom";
- reg = <0xb 0 0x1fff>;
- };
-
- };
-
- alt-flash@6,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "intel,JS28F640", "cfi-flash";
- reg = <0x6 0x0 0x800000>;
- bank-width = <1>;
- device-width = <1>;
- partition@0 {
- label = "space";
- /* EF800000 -> EFF9FFFF */
- reg = <0x00000000 0x007a0000>;
- };
- partition@7a0000 {
- label = "bootloader";
- /* EFFA0000 -> EFFFFFFF */
- reg = <0x007a0000 0x00060000>;
- read-only;
- };
- };
-
-
- };
-};
-
-/include/ "sbc8548-post.dtsi"
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-/{
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- ranges = <0x00000000 0xe0000000 0x00100000>;
- bus-frequency = <0>;
- compatible = "simple-bus";
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <0x12 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <0x20>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <0x10 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
- };
-
- pci0: pci@e0008000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x01 (PCI-X slot) @66MHz */
- 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- bus-range = <0 0>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
- clock-frequency = <66000000>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- };
-
- pci1: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x1a 0x2>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
- clock-frequency = <33000000>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xa0000000
- 0x02000000 0x0 0xa0000000
- 0x0 0x10000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00800000>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-/{
- model = "SBC8548";
- compatible = "SBC8548";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
- localbus@e0000000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- reg = <0xe0000000 0x5000>;
- interrupt-parent = <&mpic>;
-
- ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
- 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
- 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
- 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
- 0x6 0x0 0xec000000 0x04000000>; /*64MB Flash*/
-
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "intel,JS28F640", "cfi-flash";
- reg = <0x0 0x0 0x800000>;
- bank-width = <1>;
- device-width = <1>;
- partition@0 {
- label = "space";
- /* FF800000 -> FFF9FFFF */
- reg = <0x00000000 0x007a0000>;
- };
- partition@7a0000 {
- label = "bootloader";
- /* FFFA0000 -> FFFFFFFF */
- reg = <0x007a0000 0x00060000>;
- read-only;
- };
- };
-
- epld@5,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x5 0x0 0x00b10000>;
- ranges = <
- 0x0 0x0 0x5 0x000000 0x1fff /* LED */
- 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
- 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
- 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
- >;
-
- led@0,0 {
- compatible = "led";
- reg = <0x0 0x0 0x1fff>;
- };
-
- switches@1,0 {
- compatible = "switches";
- reg = <0x1 0x0 0x1fff>;
- };
-
- hw-rev@3,0 {
- compatible = "hw-rev";
- reg = <0x3 0x0 0x1fff>;
- };
-
- eeprom@b,0 {
- compatible = "eeprom";
- reg = <0xb 0 0x1fff>;
- };
-
- };
-
- alt-flash@6,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6 0x0 0x04000000>;
- compatible = "intel,JS28F128", "cfi-flash";
- bank-width = <4>;
- device-width = <1>;
- partition@0 {
- label = "space";
- /* EC000000 -> EFEFFFFF */
- reg = <0x00000000 0x03f00000>;
- };
- partition@3f00000 {
- label = "bootloader";
- /* EFF00000 -> EFFFFFFF */
- reg = <0x03f00000 0x00100000>;
- read-only;
- };
- };
- };
-};
-
-/include/ "sbc8548-post.dtsi"
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo=$object/cuboot-85xx-cpm2.o
;;
- *-mpc85*|*-tqm85*|*-sbc85*)
+ *-mpc85*|*-tqm85*)
platformo=$object/cuboot-85xx.o
;;
*-amigaone)
+++ /dev/null
-CONFIG_PPC_85xx=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8548=y
-CONFIG_GEN_RTC=y
-CONFIG_BINFMT_MISC=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_BROADCOM_PHY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y
CONFIG_TWR_P102x=y
-CONFIG_SBC8548=y
CONFIG_SOCRATES=y
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
select TQM85xx
select CPM2
-config SBC8548
- bool "Wind River SBC8548"
- select DEFAULT_UIMAGE
- help
- This option enables support for the Wind River SBC8548 board
-
config PPA8548
bool "Prodrive PPA8548"
help
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
-obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_PPA8548) += ppa8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Wind River SBC8548 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8548CDS support - Copyright 2005 Freescale Inc.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/interrupt.h>
-#include <linux/fsl_devices.h>
-#include <linux/of_platform.h>
-#include <linux/pgtable.h>
-
-#include <asm/page.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-static int sbc_rev;
-
-static void __init sbc8548_pic_init(void)
-{
- struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
- 0, 256, " OpenPIC ");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-}
-
-/* Extract the HW Rev from the EPLD on the board */
-static int __init sbc8548_hw_rev(void)
-{
- struct device_node *np;
- struct resource res;
- unsigned int *rev;
- int board_rev = 0;
-
- np = of_find_compatible_node(NULL, NULL, "hw-rev");
- if (np == NULL) {
- printk("No HW-REV found in DTB.\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
- of_node_put(np);
-
- rev = ioremap(res.start,sizeof(unsigned int));
- board_rev = (*rev) >> 28;
- iounmap(rev);
-
- return board_rev;
-}
-
-/*
- * Setup the architecture
- */
-static void __init sbc8548_setup_arch(void)
-{
- if (ppc_md.progress)
- ppc_md.progress("sbc8548_setup_arch()", 0);
-
- fsl_pci_assign_primary();
-
- sbc_rev = sbc8548_hw_rev();
-}
-
-static void sbc8548_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8548_probe(void)
-{
- return of_machine_is_compatible("SBC8548");
-}
-
-define_machine(sbc8548) {
- .name = "SBC8548",
- .probe = sbc8548_probe,
- .setup_arch = sbc8548_setup_arch,
- .init_IRQ = sbc8548_pic_init,
- .show_cpuinfo = sbc8548_show_cpuinfo,
- .get_irq = mpic_get_irq,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
- .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
-#endif
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
projects / mirror_ubuntu-jammy-kernel.git / commitdiff