reg = <0x60000000 0x40000000>;
};
- soc {
- uart0: serial@10124000 {
- status = "okay";
- };
+ uart0: serial@10124000 {
+ status = "okay";
+ };
- uart1: serial@10126000 {
- status = "okay";
- };
+ uart1: serial@10126000 {
+ status = "okay";
+ };
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- status = "okay";
- };
+ uart2: serial@20064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+ };
- uart3: serial@20068000 {
- status = "okay";
- };
+ uart3: serial@20068000 {
+ status = "okay";
+ };
- vcc_sd0: fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "sdmmc-supply";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
- startup-delay-us = <100000>;
- };
+ vcc_sd0: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ };
- dwmmc@10214000 { /* sdmmc */
- num-slots = <1>;
- status = "okay";
+ dwmmc@10214000 { /* sdmmc */
+ num-slots = <1>;
+ status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
- vmmc-supply = <&vcc_sd0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+ };
- dwmmc@10218000 { /* wifi */
- num-slots = <1>;
- status = "okay";
- non-removable;
+ dwmmc@10218000 { /* wifi */
+ num-slots = <1>;
+ status = "okay";
+ non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+ };
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- button@0 {
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
- linux,code = <116>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- gpio-key,wakeup = <1>;
- debounce-interval = <100>;
- };
- button@1 {
- gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
- linux,code = <104>;
- label = "GPIO Key Vol-";
- linux,input-type = <1>;
- gpio-key,wakeup = <0>;
- debounce-interval = <100>;
- };
- /* VOL+ comes somehow thru the ADC */
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ button@1 {
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ linux,code = <104>;
+ label = "GPIO Key Vol-";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <0>;
+ debounce-interval = <100>;
};
+ /* VOL+ comes somehow thru the ADC */
};
};
};
};
- soc {
- timer@20038000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x20038000 0x100>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
- clock-names = "timer", "pclk";
- };
+ timer@20038000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x20038000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
+ clock-names = "timer", "pclk";
+ };
+
+ timer@2003a000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x2003a000 0x100>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
+ clock-names = "timer", "pclk";
+ };
+
+ timer@2000e000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x2000e000 0x100>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
+ clock-names = "timer", "pclk";
+ };
- timer@2003a000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x2003a000 0x100>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
- clock-names = "timer", "pclk";
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x10000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x0 0x50>;
};
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3066a-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pinctrl@20008000 {
+ compatible = "rockchip,rk3066a-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- timer@2000e000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x2000e000 0x100>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
- clock-names = "timer", "pclk";
+ gpio0: gpio0@20034000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20034000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- sram: sram@10080000 {
- compatible = "mmio-sram";
- reg = <0x10080000 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10080000 0x10000>;
+ gpio1: gpio1@2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
- smp-sram@0 {
- compatible = "rockchip,rk3066-smp-sram";
- reg = <0x0 0x50>;
- };
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- cru: clock-controller@20000000 {
- compatible = "rockchip,rk3066a-cru";
- reg = <0x20000000 0x1000>;
- rockchip,grf = <&grf>;
+ gpio2: gpio2@2003e000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003e000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
- #clock-cells = <1>;
- #reset-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- pinctrl@20008000 {
- compatible = "rockchip,rk3066a-pinctrl";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ gpio3: gpio3@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
- gpio0: gpio0@20034000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20034000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO0>;
+ gpio-controller;
+ #gpio-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio4: gpio4@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>;
- gpio1: gpio1@2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio6: gpio6@2000a000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO6>;
- gpio2: gpio2@2003e000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003e000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
+ };
- gpio3: gpio3@20080000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20080000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>;
+ pcfg_pull_none: pcfg_pull_none {
+ bias-disable;
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart0_cts: uart0-cts {
+ rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio4: gpio4@20084000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20084000 0x100>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO4>;
+ uart0_rts: uart0-rts {
+ rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1_cts: uart1-cts {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio6: gpio6@2000a000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO6>;
+ uart1_rts: uart1-rts {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ /* no rts / cts for uart2 */
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
};
- pcfg_pull_default: pcfg_pull_default {
- bias-pull-pin-default;
+ uart3_cts: uart3-cts {
+ rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
};
- pcfg_pull_none: pcfg_pull_none {
- bias-disable;
+ uart3_rts: uart3-rts {
+ rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
};
+ };
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0 {
+ sd0_clk: sd0-clk {
+ rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_cmd: sd0-cmd {
+ rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_cd: sd0-cd {
+ rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
};
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_wp: sd0-wp {
+ rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_bus1: sd0-bus-width1 {
+ rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_bus4: sd0-bus-width4 {
+ rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
};
+ };
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
- };
- /* no rts / cts for uart2 */
+ sd1 {
+ sd1_clk: sd1-clk {
+ rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
};
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_cmd: sd1-cmd {
+ rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_cd: sd1-cd {
+ rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+ };
- uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_wp: sd1-wp {
+ rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
};
- sd0 {
- sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_bus1: sd1-bus-width1 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
};
- sd1 {
- sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_bus4: sd1-bus-width4 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
};
reg = <0x60000000 0x80000000>;
};
- soc {
- uart0: serial@10124000 {
- status = "okay";
- };
+ uart0: serial@10124000 {
+ status = "okay";
+ };
- uart1: serial@10126000 {
- status = "okay";
- };
+ uart1: serial@10126000 {
+ status = "okay";
+ };
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- status = "okay";
- };
+ uart2: serial@20064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+ };
- uart3: serial@20068000 {
- status = "okay";
- };
+ uart3: serial@20068000 {
+ status = "okay";
+ };
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
- button@0 {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- gpio-key,wakeup = <1>;
- debounce-interval = <100>;
- };
+ button@0 {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
};
+ };
- gpio-leds {
- compatible = "gpio-leds";
-
- green {
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ gpio-leds {
+ compatible = "gpio-leds";
- yellow {
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ green {
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- sleep {
- gpios = <&gpio0 15 0>;
- default-state = "off";
- };
+ yellow {
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
+ sleep {
+ gpios = <&gpio0 15 0>;
+ default-state = "off";
+ };
};
};
};
};
- soc {
- global-timer@1013c200 {
- interrupts = <GIC_PPI 11 0xf04>;
+ global-timer@1013c200 {
+ interrupts = <GIC_PPI 11 0xf04>;
+ };
+
+ local-timer@1013c600 {
+ interrupts = <GIC_PPI 13 0xf04>;
+ };
+
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x8000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x0 0x50>;
};
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
- local-timer@1013c600 {
- interrupts = <GIC_PPI 13 0xf04>;
+ pinctrl@20008000 {
+ compatible = "rockchip,rk3188-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@0x2000a000 {
+ compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- sram: sram@10080000 {
- compatible = "mmio-sram";
- reg = <0x10080000 0x8000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10080000 0x8000>;
+ gpio1: gpio1@0x2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
- smp-sram@0 {
- compatible = "rockchip,rk3066-smp-sram";
- reg = <0x0 0x50>;
- };
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- cru: clock-controller@20000000 {
- compatible = "rockchip,rk3188-cru";
- reg = <0x20000000 0x1000>;
- rockchip,grf = <&grf>;
+ gpio2: gpio2@2003e000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003e000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
- #clock-cells = <1>;
- #reset-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- pinctrl@20008000 {
- compatible = "rockchip,rk3188-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmu>;
+ gpio3: gpio3@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ gpio-controller;
+ #gpio-cells = <2>;
- gpio0: gpio0@0x2000a000 {
- compatible = "rockchip,rk3188-gpio-bank0";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ pcfg_pull_up: pcfg_pull_up {
+ bias-pull-up;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pcfg_pull_down: pcfg_pull_down {
+ bias-pull-down;
+ };
- gpio1: gpio1@0x2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>;
+ pcfg_pull_none: pcfg_pull_none {
+ bias-disable;
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart0_cts: uart0-cts {
+ rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
};
- gpio2: gpio2@2003e000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003e000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>;
+ uart0_rts: uart0-rts {
+ rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1_cts: uart1-cts {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
};
- gpio3: gpio3@20080000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20080000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>;
+ uart1_rts: uart1-rts {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
};
- pcfg_pull_up: pcfg_pull_up {
- bias-pull-up;
+ uart3_cts: uart3-cts {
+ rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
};
- pcfg_pull_down: pcfg_pull_down {
- bias-pull-down;
+ uart3_rts: uart3-rts {
+ rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
};
+ };
- pcfg_pull_none: pcfg_pull_none {
- bias-disable;
+ sd0 {
+ sd0_clk: sd0-clk {
+ rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
};
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_cmd: sd0-cmd {
+ rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_cd: sd0-cd {
+ rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_wp: sd0-wp {
+ rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
};
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_pwr: sd0-pwr {
+ rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_bus1: sd0-bus-width1 {
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_bus4: sd0-bus-width4 {
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
};
+ };
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
- };
- /* no rts / cts for uart2 */
+ sd1 {
+ sd1_clk: sd1-clk {
+ rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
};
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_cmd: sd1-cmd {
+ rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_cd: sd1-cd {
+ rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+ };
- uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_wp: sd1-wp {
+ rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
};
- sd0 {
- sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_pwr: sd0-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_bus1: sd1-bus-width1 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
};
- sd1 {
- sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_bus4: sd1-bus-width4 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
clock-output-names = "xin24m";
};
- soc {
+ scu@1013c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1013c000 0x100>;
+ };
+
+ pmu: pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon";
+ reg = <0x20004000 0x100>;
+ };
+
+ grf: grf@20008000 {
+ compatible = "syscon";
+ reg = <0x20008000 0x200>;
+ };
+
+ gic: interrupt-controller@1013d000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x1013d000 0x1000>,
+ <0x1013c100 0x0100>;
+ };
+
+ L2: l2-cache-controller@10138000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10138000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ global-timer@1013c200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x1013c200 0x20>;
+ interrupts = <GIC_PPI 11 0x304>;
+ clocks = <&cru CORE_PERI>;
+ };
+
+ local-timer@1013c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1013c600 0x20>;
+ interrupts = <GIC_PPI 13 0x304>;
+ clocks = <&cru CORE_PERI>;
+ };
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@10126000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10126000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@20068000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20068000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART3>;
+ status = "disabled";
+ };
+
+ dwmmc@10214000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10214000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- scu@1013c000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x1013c000 0x100>;
- };
-
- pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
- reg = <0x20004000 0x100>;
- };
-
- grf: grf@20008000 {
- compatible = "syscon";
- reg = <0x20008000 0x200>;
- };
-
- gic: interrupt-controller@1013d000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1013d000 0x1000>,
- <0x1013c100 0x0100>;
- };
-
- L2: l2-cache-controller@10138000 {
- compatible = "arm,pl310-cache";
- reg = <0x10138000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- global-timer@1013c200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x1013c200 0x20>;
- interrupts = <GIC_PPI 11 0x304>;
- clocks = <&cru CORE_PERI>;
- };
-
- local-timer@1013c600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
- clocks = <&cru CORE_PERI>;
- };
-
- uart0: serial@10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&cru SCLK_UART0>;
- status = "disabled";
- };
-
- uart1: serial@10126000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10126000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&cru SCLK_UART1>;
- status = "disabled";
- };
-
- uart2: serial@20064000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20064000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&cru SCLK_UART2>;
- status = "disabled";
- };
-
- uart3: serial@20068000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20068000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&cru SCLK_UART3>;
- status = "disabled";
- };
-
- dwmmc@10214000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10214000 0x1000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
-
- dwmmc@10218000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10218000 0x1000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
+ #size-cells = <0>;
+
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+
+ dwmmc@10218000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10218000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
};
};
projects / mirror_ubuntu-focal-kernel.git / commitdiff