hwmon: (pmbus) Add support for TI TPS40400 and TPS40422

TPS40400 and TPS40422 are supported by the generic PMBus driver.
Add device IDs and data sheet references.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index d28b591753d11574e476fb3bbc06a7cae3ee6b2e..c2b157ba9006e5ac8a8ca45e77ba53649c2d846f 100644 (file)
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -22,6 +22,12 @@ Supported chips:
        http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
        http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
        http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
+  * Texas Instruments TPS40400, TPS40422
+    Prefixes: 'tps40400', 'tps40422'
+    Addresses scanned: -
+    Datasheets:
+       http://www.ti.com/lit/gpn/tps40400
+       http://www.ti.com/lit/gpn/tps40422
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index cfec923f42b7d271918760b7d722b546d1faf9a5..7968c815f4433641abe266ce9002f7377888a033 100644 (file)
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -20,7 +20,7 @@ config SENSORS_PMBUS
        help
          If you say yes here you get hardware monitoring support for generic
          PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
-         NCP4200, and NCP4208.
+         NCP4200, NCP4208, TPS40400, and TPS40422.
 
          This driver can also be built as a module. If so, the module will
          be called pmbus.

diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index 34887408505bc058f6313c66ada96900301d515a..7d5161dd04f0d6e841fcd8fb71ebb1cf4f90f100 100644 (file)
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -191,6 +191,8 @@ static const struct i2c_device_id pmbus_id[] = {
        {"pdt006", 1},
        {"pdt012", 1},
        {"pmbus", 0},
+       {"tps40400", 1},
+       {"tps40422", 2},
        {"udt020", 1},
        {}
 };