scsi: mpt3sas: wait for and flush running commands on shutdown/unload

This patch finishes all outstanding SCSI IO commands (but not other commands,
e.g., task management) in the shutdown and unload paths.

It first waits for the commands to complete (this is done after setting
'ioc->remove_host = 1 ', which prevents new commands to be queued) then it
flushes commands that might still be running.

This avoids triggering error handling (e.g., abort command) for all commands
possibly completed by the adapter after interrupts disabled.

[mauricfo: introduced something in commit message.]

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 59a87ca328d36d39d2d95a1e6bd39e25573065a9..0aafbfd1b7465c3a566c89392e73bfab1e037173 100644 (file)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -6297,14 +6297,14 @@ _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
 }
 
 /**
- * _wait_for_commands_to_complete - reset controller
+ * mpt3sas_wait_for_commands_to_complete - reset controller
  * @ioc: Pointer to MPT_ADAPTER structure
  *
  * This function is waiting 10s for all pending commands to complete
  * prior to putting controller in reset.
  */
-static void
-_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
 {
        u32 ioc_state;
 
@@ -6377,7 +6377,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
                        is_fault = 1;
        }
        _base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
-       _wait_for_commands_to_complete(ioc);
+       mpt3sas_wait_for_commands_to_complete(ioc);
        _base_mask_interrupts(ioc);
        r = _base_make_ioc_ready(ioc, type);
        if (r)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 789bc421424bcf5ba7de5904e9fef073843e312d..99ccf83b8c518c91b794a0311ce79d4cd41de795 100644 (file)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1433,6 +1433,9 @@ void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
 
 int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
 
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
+
 
 /* scsih shared API */
 struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 5ab3caffa08b61a8fe7bc848a122337093d25b45..c2ea13c7e37e07b2f273a85ff57b3515de0283c3 100644 (file)
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4456,7 +4456,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
                st = scsi_cmd_priv(scmd);
                mpt3sas_base_clear_st(ioc, st);
                scsi_dma_unmap(scmd);
-               if (ioc->pci_error_recovery)
+               if (ioc->pci_error_recovery || ioc->remove_host)
                        scmd->result = DID_NO_CONNECT << 16;
                else
                        scmd->result = DID_RESET << 16;
@@ -9742,6 +9742,10 @@ static void scsih_remove(struct pci_dev *pdev)
        unsigned long flags;
 
        ioc->remove_host = 1;
+
+       mpt3sas_wait_for_commands_to_complete(ioc);
+       _scsih_flush_running_cmds(ioc);
+
        _scsih_fw_event_cleanup_queue(ioc);
 
        spin_lock_irqsave(&ioc->fw_event_lock, flags);
@@ -9818,6 +9822,10 @@ scsih_shutdown(struct pci_dev *pdev)
        unsigned long flags;
 
        ioc->remove_host = 1;
+
+       mpt3sas_wait_for_commands_to_complete(ioc);
+       _scsih_flush_running_cmds(ioc);
+
        _scsih_fw_event_cleanup_queue(ioc);
 
        spin_lock_irqsave(&ioc->fw_event_lock, flags);