]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
serial: avoid stalling suspend if serial port won't drain
authorRussell King <rmk+lkml@arm.linux.org.uk>
Tue, 5 Feb 2008 06:27:52 +0000 (22:27 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Tue, 5 Feb 2008 17:44:10 +0000 (09:44 -0800)
Some ports seem to be unable to drain their transmitters on shut down.  Such a
problem can occur if the port is programmed for hardware imposed flow control,
characters are in the FIFO but the CTS signal is inactive.

Normally, this isn't a problem because most places where we wait for the
transmitter to drain have a time-out.  However, there is no timeout in the
suspend path.

Give a port 30ms to drain; this is an arbitary value chosen to avoid long
delays if there are many such ports in the system, while giving a reasonable
chance for a single port to drain.  Should a port not drain within this
timeout, issue a warning.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/serial/serial_core.c

index 2554d2fa654243f9ce3baabfa7e71bfdc2eea769..304fe32eb066289caf53fddc6d7a96bea3e2dd84 100644 (file)
@@ -1977,6 +1977,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 
        if (state->info && state->info->flags & UIF_INITIALIZED) {
                const struct uart_ops *ops = port->ops;
+               int tries;
 
                state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
                                     | UIF_SUSPENDED;
@@ -1990,9 +1991,14 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
                /*
                 * Wait for the transmitter to empty.
                 */
-               while (!ops->tx_empty(port)) {
+               for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
                        msleep(10);
                }
+               if (!tries)
+                       printk(KERN_ERR "%s%s%s%d: Unable to drain transmitter\n",
+                              port->dev ? port->dev->bus_id : "",
+                              port->dev ? ": " : "",
+                              drv->dev_name, port->line);
 
                ops->shutdown(port);
        }