Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

diff --cc Documentation/devicetree/bindings/arm/shmobile.txt
Simple merge

diff --cc Documentation/devicetree/bindings/usb/dwc2.txt
Simple merge

diff --cc arch/arm/boot/dts/Makefile
Simple merge

diff --cc arch/arm/boot/dts/sun6i-a31.dtsi
index 0d24f107ede0ba127dae0d1b27206fa523bb192e,6a84fe7e9ab267c2eb9a5df4280d373c850aa659..ce1960453a0bb96bda88162a50e4826a0fdfb172
--- 1/arch/arm/boot/dts/sun6i-a31.dtsi
--- 2/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@@ -469,12 -247,12 +247,12 @@@
                };
  
                mmc0: mmc@01c0f000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c0f000 0x1000>;
-                       clocks = <&ahb1_gates 8>,
-                                <&mmc0_clk 0>,
-                                <&mmc0_clk 1>,
-                                <&mmc0_clk 2>;
+                       clocks = <&ccu CLK_AHB1_MMC0>,
+                                <&ccu CLK_MMC0>,
+                                <&ccu CLK_MMC0_OUTPUT>,
+                                <&ccu CLK_MMC0_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
@@@ -488,12 -266,12 +266,12 @@@
                };
  
                mmc1: mmc@01c10000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c10000 0x1000>;
-                       clocks = <&ahb1_gates 9>,
-                                <&mmc1_clk 0>,
-                                <&mmc1_clk 1>,
-                                <&mmc1_clk 2>;
+                       clocks = <&ccu CLK_AHB1_MMC1>,
+                                <&ccu CLK_MMC1>,
+                                <&ccu CLK_MMC1_OUTPUT>,
+                                <&ccu CLK_MMC1_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
@@@ -507,12 -285,12 +285,12 @@@
                };
  
                mmc2: mmc@01c11000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c11000 0x1000>;
-                       clocks = <&ahb1_gates 10>,
-                                <&mmc2_clk 0>,
-                                <&mmc2_clk 1>,
-                                <&mmc2_clk 2>;
+                       clocks = <&ccu CLK_AHB1_MMC2>,
+                                <&ccu CLK_MMC2>,
+                                <&ccu CLK_MMC2_OUTPUT>,
+                                <&ccu CLK_MMC2_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
@@@ -526,12 -304,12 +304,12 @@@
                };
  
                mmc3: mmc@01c12000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c12000 0x1000>;
-                       clocks = <&ahb1_gates 11>,
-                                <&mmc3_clk 0>,
-                                <&mmc3_clk 1>,
-                                <&mmc3_clk 2>;
+                       clocks = <&ccu CLK_AHB1_MMC3>,
+                                <&ccu CLK_MMC3>,
+                                <&ccu CLK_MMC3_OUTPUT>,
+                                <&ccu CLK_MMC3_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",

diff --cc arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 826877b14bfff5c0d5ca55f024de82384d4f8fcf,ea4082cd111bcd7923e9d5e368d1688fdce974d4..48fc24f36fcb268b7c0ba30348e0f0cc17826a9c
--- 1/arch/arm/boot/dts/sun8i-a23-a33.dtsi
--- 2/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@@ -274,12 -133,12 +133,12 @@@
                };
  
                mmc0: mmc@01c0f000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c0f000 0x1000>;
-                       clocks = <&ahb1_gates 8>,
-                                <&mmc0_clk 0>,
-                                <&mmc0_clk 1>,
-                                <&mmc0_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC0>,
+                                <&ccu CLK_MMC0>,
+                                <&ccu CLK_MMC0_OUTPUT>,
+                                <&ccu CLK_MMC0_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
@@@ -293,12 -152,12 +152,12 @@@
                };
  
                mmc1: mmc@01c10000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c10000 0x1000>;
-                       clocks = <&ahb1_gates 9>,
-                                <&mmc1_clk 0>,
-                                <&mmc1_clk 1>,
-                                <&mmc1_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC1>,
+                                <&ccu CLK_MMC1>,
+                                <&ccu CLK_MMC1_OUTPUT>,
+                                <&ccu CLK_MMC1_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
@@@ -312,12 -171,12 +171,12 @@@
                };
  
                mmc2: mmc@01c11000 {
 -                      compatible = "allwinner,sun5i-a13-mmc";
 +                      compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c11000 0x1000>;
-                       clocks = <&ahb1_gates 10>,
-                                <&mmc2_clk 0>,
-                                <&mmc2_clk 1>,
-                                <&mmc2_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC2>,
+                                <&ccu CLK_MMC2>,
+                                <&ccu CLK_MMC2_OUTPUT>,
+                                <&ccu CLK_MMC2_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",

diff --cc arch/arm/boot/dts/sun8i-h3.dtsi
Simple merge

diff --cc arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
Simple merge

diff --cc drivers/net/ethernet/stmicro/stmmac/Kconfig
Simple merge

diff --cc drivers/net/ethernet/stmicro/stmmac/Makefile
Simple merge

diff --cc drivers/usb/dwc2/platform.c
Simple merge