]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
When a break signal is detected, the next character should be ignored.
authorMischa Jonker <mischa.jonker@nxp.com>
Thu, 15 Jan 2009 13:30:56 +0000 (13:30 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 15 Jan 2009 20:48:36 +0000 (12:48 -0800)
This was not implemented correctly for the pnx8xxx_uart driver.

[From further discussion:
Correct, you can look to it as two separate bugs:
a) the next character is not ignored while it should;
b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't.

Both bugs prevent correct break signal handling (and therefore correct
behaviour of the magic SysRq key). Bug b didn't cause too much trouble
earlier because in most situations the status bits are all zero; for
this case they unfortunately aren't.
]

Signed-off-by: Mischa Jonker <mischa.jonker@nxp.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/serial/pnx8xxx_uart.c

index 22e30d21225e7482a26615a40f33221a3c3a620b..1bb8f1b45767f2de4c7095123c47595a31b4474f 100644 (file)
@@ -187,7 +187,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
        status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
                 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
        while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-               ch = serial_in(sport, PNX8XXX_FIFO);
+               ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
 
                sport->port.icount.rx++;
 
@@ -198,9 +198,16 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
                 * out of the main execution path
                 */
                if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-                                       PNX8XXX_UART_FIFO_RXPAR) |
+                                       PNX8XXX_UART_FIFO_RXPAR |
+                                       PNX8XXX_UART_FIFO_RXBRK) |
                              ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-                       if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
+                       if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
+                               status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
+                                       FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
+                               sport->port.icount.brk++;
+                               if (uart_handle_break(&sport->port))
+                                       goto ignore_char;
+                       } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
                                sport->port.icount.parity++;
                        else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
                                sport->port.icount.frame++;
@@ -284,14 +291,8 @@ static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
        /* Get the interrupts */
        status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 
-       /* Break signal received */
-       if (status & PNX8XXX_UART_INT_BREAK) {
-               sport->port.icount.brk++;
-               uart_handle_break(&sport->port);
-       }
-
-       /* Byte received */
-       if (status & PNX8XXX_UART_INT_RX)
+       /* Byte or break signal received */
+       if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
                pnx8xxx_rx_chars(sport);
 
        /* TX holding register empty - transmit a byte */