ARM: dts: logicpd-somlv: Fix wl127x pinmux

The pin assignment for the wl127x interrupt was incorrect.  I am
not sure how this every worked.  This also eliminates a conflict with
the SMC911x ethernet driver and properly moves pinmuxes for the
related gpio to omap3_pmx_wkup from omap3_pmx_core.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index c5edc7fe4837e4528eb8a3ec81236852fb39dde6..4f2c5ec7571450a59aca89293f3a6e71e30db1da 100644 (file)
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -121,7 +121,7 @@
 
 &mmc3 {
        interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-       pinctrl-0 = <&mmc3_pins>;
+       pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
        pinctrl-names = "default";
        vmmc-supply = <&wl12xx_vmmc>;
        non-removable;
@@ -132,8 +132,8 @@
        wlcore: wlcore@2 {
                compatible = "ti,wl1273";
                reg = <2>;
-               interrupt-parent = <&gpio5>;
-               interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+               interrupt-parent = <&gpio1>;
+               interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
                ref-clock-frequency = <26000000>;
        };
 };
@@ -157,8 +157,6 @@
                        OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
                        OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
                        OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
-                       OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
-                       OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)       /* sys_boot1.gpio_3 */
                        OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
                        OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
                >;
@@ -228,6 +226,12 @@
                        OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)        /* sys_boot2.gpio_4 */
                >;
        };
+       wl127x_gpio: pinmux_wl127x_gpio_pin {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)         /* sys_boot0.gpio_2 */
+                       OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)        /* sys_boot1.gpio_3 */
+               >;
+       };
 };
 
 &omap3_pmx_core2 {