-ifupdown2 (3.1.0-1+pmx4) bullseye; urgency=medium
+ifupdown2 (3.2.0) unstable; urgency=medium
+
+ * Fix: Sonarqube issues
+ * Fix: ifquery hangs indefinitely on ^C
+ * Fix: Skipping admin down on deleted vlans
+ * Fix: Merge existing MTU into new netlink object
+ * Fix: scheduler: env variable not properly set for user commands (fixes #218)
+ * Fix: ifquery-check: vlan-protocol for dotted interfaces
+ * Fix: Down ops on vrf-slave should set the slave admin down
+ * New: Allow bond creation without slaves
+ * New: Add `--set-ring` option to ethtool
+ * New: Openvswitch : add support for fakebridge
+ * New: add support for systemd logging (--systemd)
+ * New: Process hwaddress before processing ip addresses
+ * New: Set protodown off on bond slave before bond is deleted
+ * New: Make sure bond speed and slaves (swps) speed are matching
+
+ -- Julien Fortin <jfortin@nvidia.com> Thu, 04 May 2023 23:42:00 -0700
+
+ifupdown2 (3.1.0-1) unstable; urgency=medium
+
+ * New: ifquery-check now validates admin state
+ * New: bond: bond mac should always be inherited from it's first slave
+
+ * New: macvlan/addressvirtual features:
+ - check interface name lenght and warn if len > 15
+ - sync macvlan forwarding state with lower-device
+
+ * New: vxlan features:
+ - Single vxlan device support (bridge-vlan-vni-map)
+ New attributes:
+ - vxlan-mcastgrp-map (vxlan multicast group for single-vxlan device)
+ - vxlan-vnifilter (vxlan vni filter for single-vxlan device)
+ - vxlan-remoteip-map (static HREP entries for static single vxlan dev)
+ - vxlan-tos (ToS value)
+ - vxlan-udp-csum (whether to perform checksumming or not)
+ New policy:
+ - vxlan-support-mix-dev-types: allow mix of traditional and single
+ vxlan device (default to yes)
+
+ * New: bridge features:
+ - add multi bridge support for bridge_set_static_mac_from_port=yes
+ - check if bridge mac is already inherited from a port
+ - detect VXLAN mis-config VNI "bridge-learning=on" and warn
+ - detect and warn when arp suppression is enabled but no vlan config
+ - bridge-arp-nd-suppress with ifquery --with-default if policy is set
+ - enable ipv6 on SVD brport
+ - enable forwarding on dhcp bridges (fixes: #179)
+ New attribute:
+ - bridge-vlan-vni-map (single vxlan device support)
+ New policy:
+ - bridge_always_up_dummy_brport
+
+ * New: address features:
+ - warn user if L3-SVI is configured with "ip-forward off"
+ - enable ipv6 before adding new address
+ New policies:
+ - check_l3_svi_ip_forwarding (check ip forward on l3 svi, default off)
+ - ip_blacklist: blacklist specific ip addresses
+
+ * New: vlan features:
+ - check vlan-id misconfiguration and print warning
+ New attribute:
+ - vlan-bridge-binding (if enabled link state is no longer automatically
+ transferred from the lower device)
+
+ * Fix: address: remove stale fdb entry for svi (when hwaddress is used)
+ * Fix: usercmds: Set environment just like the original ifupdown
+ * Fix: update mako template warning (python3-mako)
+ * Fix: batman_adv: fix unresolved reference
+
+ -- Julien Fortin <jfortin@nvidia.com> Mon, 05 Jul 2021 23:42:42 +0200
+
+ifupdown2 (3.0.0-1) unstable; urgency=medium
+
+ * New: python3 support
+ * New: attribute alias support
+ * New: bridge-always-up attribute
+ * New: set bridge mtu with policy default
+ * New: ES bond with "es-sys-mac" attribute
+ * New: vxlan attribute: vxlan-mcastgrp-map
+ * New: support for "veth-peer-name" attribute
+ * New: dhcp policy: dhclient_retry_on_failure
+ * New: support for marking interfaces as mgmt interfaces
+ * New: bridge-vlan-vni-map attribute (single vxlan device)
+ * New: dhcp: skipping dhcp configuration if link-down yes
+ * New: vrf-slave: keep vlan down if lower device has "link-down yes"
+ * New: vxlan: support for vxlan-svcnodeip6 and vxlan-mcastgrp6 (fixes #43)
+ * New: support for add ovs-ports-condone-regex attribute (openvswitch)
+ * Fix: dry-run exceptions
+ * Fix: bond enslavement ordering
+ * Fix: process MTU before addrgen
+ * Fix: set bridge MTU after bridge creation
+ * Fix: ifquery-running: incorrect displayed data
+ * Fix: tunnel configuration compatibility with ifupdown1
+ * Fix: start-networking script is back to handle mgmt & hotplug cases
+ * Fix: devices matching with ".{0,13}\-v" could get removed by ifreload
+ * Fix: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
+ * Removing python-argcomplete dependency
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 04 Aug 2020 23:42:42 +0200
+
+ifupdown2 (2.0.2-1) unstable; urgency=medium
+
+ * New: addons: ethtool: add support for "ethtool_ignore_errors" policy
+ * New: addons: dhcp: if mgmt vrf context exec dhclient in default vrf
+ * Fix: nlpacket: don't raise an exception on 24 bytes mac address (#140)
+ * Fix: IFLA_INFO_KIND: decode tunnel data
+ * Fix: XFRM for 2.x release
+ * Fix: addons.conf: remove duplicate entry for tunnel pre-up
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 04 Mar 2020 23:42:42 +0100
+
+ifupdown2 (2.0.1-1) unstable; urgency=medium
+
+ * New argv option: --nldebug to print netlink debug message
+ * New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 15:21:06 +0100
+
+ifupdown2 (2.0.0-1) unstable; urgency=medium
+
+ * Introduction of the live netlink cache
+ * Refactoring and PEP8 fixes
+ * Install systemd ifupdown2.netowrking.service and ifup.service
+ * Addons: bond: bond-primary attributes (closes: #9)
+ * Addons: address-virtual: vrrp support
+ * Addons: address: add arp-accept option
+ * Addons: tunnel: adding "tunnel-" prefix to every attributes
+ * Loopback interface won't go down (unless link-down yes)
+ * Macvlans (address-virtual) can now be configured without ips
+ * Add support for vxlan multicast group (vxlan-mcastgrp)
+ * New sets of poliicies:
+ - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
+ - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
+ - bridge policy for vxlan port:
+ vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 01 Oct 2019 23:42:42 +0200
+
+ifupdown2 (1.2.8-1) unstable; urgency=medium
+
+ * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 11 Jul 2019 23:42:42 +0200
+
+ifupdown2 (1.2.7-1) unstable; urgency=medium
+
+ * New: Add bridge-ports-condone-regex option (closes #117)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jul 2019 23:42:42 +0200
+
+ifupdown2 (1.2.6-1) unstable; urgency=medium
+
+ * Fix: AttributeError exception in bridge module (fixes #90)
+ * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
+ * New. policymanager: merge module policy instead of overriding duplicates
+ * New: set default mtu on user defined device (via link-type)
+ * New: add support for vxlan-ttl attribute
+ * New: add support for vrrp attribute
+ * New: introduce new bridge policy:
+ "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
+ * New: link-down yes will also down macvlans
+ * New: XFRM addon module
+ * New: Add policy to wait for IPv6 link local address to be available
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 23 Jun 2019 23:42:42 -1000
+
+ifupdown2 (1.2.5-1) unstable; urgency=medium
- * add ovs support for fakebridge
+ * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
+ * Fix: debian: install sysvinit script (closes: #918775)
+ * Fix: debian: postinst: remove diversion after upgrade from stretch
+ (closes: #919443)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 21 Jan 2019 23:42:42 +8000
+
+ifupdown2 (1.2.4-1) unstable; urgency=medium
+
+ * Fix: statemanager directory path customization via ifupdown2.conf
+ (closes: #918832)
+
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 11 Jan 2019 23:42:42 +0000
- * vlan: fix vlan-protocol query check
+ifupdown2 (1.2.3-1) unstable; urgency=medium
- * Avoid updating VLAN attributes (vlan-protocol, vlan-id) on reload, if it's
- not a full ifdown + ifup cycle.
+ * Fix: log: use stderr if syslog initialization fails (closes: #917534)
- -- Proxmox Support Team <support@proxmox.com> Tue, 16 May 2023 12:01:14 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
-ifupdown2 (3.1.0-1+pmx3) bullseye; urgency=medium
+ifupdown2 (1.2.2-1) unstable; urgency=medium
- * fix a point-to-point regression introduced in 3.1
+ * New: add support for B.A.T.M.A.N. adv. attributes
+ * New: support for new iproute2 format (bridge vlan show)
+ * New: add new checks for existing device with vxlan attributes
+ * Fix: pypi install: local addons modules should be loaded first
+ * Fix: link-down yes on vrf slaves
+ * Fix: nlmanager: use strerror to format kernel error
+ * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
+ * Fix: man: remove non-implemented -m option (closes: #905572)
- -- Proxmox Support Team <support@proxmox.com> Mon, 26 Jul 2021 12:29:08 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
-ifupdown2 (3.1.0-1+pmx2) bullseye; urgency=medium
+ifupdown2 (1.2.1) UNRELEASED; urgency=medium
- * avoid re-generating and reloading network configuration in the installer
+ * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
+ * Fix: Link down does not work on any intf configured in a VRF
+ * Add: ethtool: add link-speed 10 to valid values array
+ * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
+ * Add: warning when bridge attribute are used on non br[port] intf
+ * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
+ * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
+ * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
+ * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
+ * addressvirtual module_globals "addressvirtual_with_route_metric" policy
+ * Closes: ethtool: link-fec: local variable 'fec_attrs'
+ referencede before assignment
+ * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
+ an interface
- -- Proxmox Support Team <support@proxmox.com> Thu, 15 Jul 2021 10:35:31 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
-ifupdown2 (3.1.0-1+pmx1) bullseye; urgency=medium
+ifupdown2 (1.2.0) UNRELEASED; urgency=medium
- * update to 3.1.0 upstream release
+ * Package architecture refactoring and cleanups
+ * Package can be build/install as debian, pip or rpm package
+ * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
+ * VRF slaves: add support for link-down yes
+ * addressvirtual: macvlan: add default metric to ip4 and ip6
+ * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
+ * Closes #58: address addon "vlan_aware_bridge_address_support" policy
+ * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
+ * Configuration for IPv6 link-local auto-generate mode, new attributes:
+ ipv6-addrgen (address addon)
+ address-virtual-ipv6-addrgen (addressvirtual addon)
- * ship default policy to enable setting the MAC of a bridge to its first
- port in a stable way.
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
- -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jul 2021 16:58:03 +0200
+ifupdown2 (1.1.18) UNRELEASED; urgency=medium
-ifupdown2 (3.0.0-1+pve6) bullseye; urgency=medium
+ * Fix: Link down does not work on SVI configured in a VRF
+ * Fix: ifreload causes MTU to drop on bridge SVIs
+ * Fix: addons: addressvirtual: check if SVI name is first in routing table
+ * Fix: ifreload error on deleting bond slaves from an already configured bond
+ * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
+ * Fix: ifupdown2 syntax check needed for vxlan interfaces
+ * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
+ * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
+ * Fix: using reserved VLAN range reports error but ifreload returns 0
+ * Fix: unable to set bridge-portmcrouter to "2"
+ * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
+ * Fix: traditional bridge svi breaks when extra bridge added
+ * Fix: github #39: addons: vrf: fix vrf slave link kind
+ * New. Enabled: addons: vxlan: add support for vxlan-port attribute
- * always trigger a reload on first installation, to cope with ifupdown1
- doing a networking stop on its way out.
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
- -- Proxmox Support Team <support@proxmox.com> Tue, 06 Jul 2021 14:00:17 +0200
+ifupdown2 (1.1.17) UNRELEASED; urgency=medium
-ifupdown2 (3.0.0-1+pve5) bullseye; urgency=medium
+ * Fix: ip[6]-forward attributes not set at boot
- * fix shipping networking.service for updated debhelper compat level
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
- -- Proxmox Support Team <support@proxmox.com> Tue, 25 May 2021 10:36:40 +0200
+ifupdown2 (1.1.16) UNRELEASED; urgency=medium
-ifupdown2 (3.0.0-1+pve4) bullseye; urgency=medium
+ * Fix: python exception on macvlans address dump
+ * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
- * re-build for Proxmox VE 7 / Debian Bullseye
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
- -- Proxmox Support Team <support@proxmox.com> Mon, 24 May 2021 12:38:32 +0200
+ifupdown2 (1.1.15) UNRELEASED; urgency=medium
-ifupdown2 (3.0.0-1+pve3) buster; urgency=medium
+ * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
+ * New. Enabled: bridge attributes, when removed reset to default
+ * New. Enabled: vxlan attributes, when removed reset to default
+ * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
+ * Fix: policy "iface_defaults" not supported for MTU
+ * Fix: address module: handling of ipv4 & ipv6 (add/remove)
+ * Fix: warning for vlan reserved range
+ * Fix: MTU handling on bridge SVIs
- * allow vlan tag inside vxlan tunnel
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
- * only rewrite config on first ifupdown2 installation
+ifupdown2 (1.1.14) UNRELEASED; urgency=medium
- * update ifupdown2 submodule to current master
+ * New. Enabled: default policy for bridge MAC address
+ * Fix: ethtool: don't set link speed and duplex if autoneg is on
- -- Proxmox Support Team <support@proxmox.com> Fri, 25 Sep 2020 09:17:21 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
-ifupdown2 (3.0.0-1+pve2) pve; urgency=medium
+ifupdown2 (1.1.13) UNRELEASED; urgency=medium
- * OVS already manages the MTU if 'ovs-mtu' is defined, mind that.
+ * Fix: VRF: ssh session not killed on ifreload
- -- Proxmox Support Team <support@proxmox.com> Fri, 05 Jun 2020 08:31:14 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
-ifupdown2 (3.0.0-1+pve1) pve; urgency=medium
+ifupdown2 (1.1.12) UNRELEASED; urgency=medium
- * update to new 3.0.0 upstream release
+ * New. Enabled: mpls-enable attribute
+ * New. Enabled: bond and bridge module moved to netlink configuration
+ * New. Enabled: handle a mix of auto and specified vrf table ids
+ * Fix: igmp attribute reset to defaults when removed from config
- -- Proxmox Support Team <support@proxmox.com> Wed, 03 Jun 2020 09:22:02 +0200
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
-ifupdown2 (2.0.1-1+pve10) pve; urgency=medium
+ifupdown2 (1.1.11) UNRELEASED; urgency=medium
- * avoid bringing network config in sync if pve-common isn't available
+ * Fix: link-down attribute not applied on slave ports
+ * Fix: bug that prevented config of mtu below 1280
- * openvswitch: do not remove tap|veth interfaces when adding an internal ovs
- port
+ -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
- -- Proxmox Support Team <support@proxmox.com> Tue, 19 May 2020 22:11:49 +0200
+ifupdown2 (1.1.10) UNRELEASED; urgency=medium
-ifupdown2 (2.0.1-1+pve8) pve; urgency=medium
+ * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
+ * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
+ * New. Enabled: bond-lacp-rate support slow/fast argument
+ * New. Enabled: ifquery --syntax-help: add support for json output
+ * New. Enabled: vlan: add new attribute 'vlan-protocol'
+ * New. Enabled: address: add new attribute 'ip6-forward'
+ * New. Enabled: bridge: add new attribute 'bridge-mcstats'
+ * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
+ * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
+ * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
+ * Fix: bond: add attribute bond-(up|down)delay
+ * Fix: bridge-vids: --syntax-check accepts legacy syntax
- * drop now outdated allow=ovs systemd service ExecStart/Stop adaption
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
- -- Proxmox Support Team <support@proxmox.com> Mon, 16 Mar 2020 06:33:45 +0100
+ifupdown2 (1.1.9) UNRELEASED; urgency=medium
-ifupdown2 (2.0.1-1+pve7) pve; urgency=medium
+ * New. Enabled: support for bridge-learning attribute
- * fupdown2-pre.service: fix udevadm path for non usr-merged systems
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
- -- Proxmox Support Team <support@proxmox.com> Tue, 10 Mar 2020 08:09:53 +0100
+ifupdown2 (1.1.8) UNRELEASED; urgency=medium
-ifupdown2 (2.0.1-1+pve6) pve; urgency=medium
+ * New. Enabled: update link-speed values: add 25G and 50G
+ * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
- * add openvswitch addon
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
- * add patch to ifup/ifdown allow=ovs on start/stop
+ifupdown2 (1.1.7) UNRELEASED; urgency=medium
- * add ifupdown2-pre.service service to be sure that networking devices are
- correctly setup before networking service is started
+ * New. Enabled: fix for inet and inet6 dhcp on the same interface
+ * New. Enabled: syntax check to warn on common configuration mistakes
+ * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
+ and no upperifaces
+ * Fix: fixes for MTU handling
+ * Fix: dhcpv6 fails if interface doesn't have link-local addr
- * do not change interface forwarding value if not defined
+ -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
- * read/write the network configuration on upgrade and removal of the
- ifupdown2 package, writing eventual changes to the pending 'interfaces.new'
- changes file. This ensures compatibility adapations for a respective
- ifupdwon2 or ifupdown1 version are enforced.
+ifupdown2 (1.1.6) UNRELEASED; urgency=medium
- -- Proxmox Support Team <support@proxmox.com> Mon, 09 Mar 2020 13:25:58 +0100
+ * Closes: github #14. add environment variables passed to user scripts
+ * New. Enabled: addons may provide a list of ifupdown scripts to ignore
-ifupdown2 (2.0.1-1+pve4) pve; urgency=medium
+ -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
- * execute addon scripts before module to ensure OVS interfaces are available
- at the time they're now being configured...
+ifupdown2 (1.1.5) UNRELEASED; urgency=medium
- -- Proxmox Support Team <support@proxmox.com> Mon, 03 Feb 2020 10:53:43 +0100
+ * Fix: handling of EXISTS errors on address add
+ * Fix: handling of mtu on addressvirtual macvlan devices
+ * Fix: mako namespace handling
-ifupdown2 (2.0.1-1+pve3) pve; urgency=medium
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
- * fix ordering and dependencies of networking.service
+ifupdown2 (1.1.4) UNRELEASED; urgency=medium
- -- Proxmox Support Team <support@proxmox.com> Thu, 30 Jan 2020 12:51:45 +0100
+ * Performance improvements
+ * New. Enabled: sbin: start-networking: support hotplug class from init script
+ * New. Enabled: support for classical numerical bond modes
+ * New. Enabled: extend ifquery support for mstpctl addons
+ * New. Enabled: each addon may perform semantic and syntax checks by
+ implementing a custom method
+ * Fix: Support for address-virtual lines under a vrf slave
+ * Fix: Defaults for link attributes were not applied
+ * Fix: Disable IPv6 duplicate address detection on VRR interfaces
+ * Fix: ifquery to extract vlan-id from iface if not preset
+ * Fix: ifquery -c bridge pvid error on a valid config
-ifupdown2 (2.0.1-1+pve2) pve; urgency=medium
+ -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
- * Update to 2.0.1-1
+ifupdown2 (1.1.3) UNRELEASED; urgency=medium
- -- Proxmox Support Team <support@proxmox.com> Mon, 13 Jan 2020 09:14:22 +0100
+ * Fix: Interface configuration parsing error when keyword vlan
+ is the interface name.
-ifupdown2 (1.2.8-1+pve4) pve; urgency=medium
+ -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
- * add arp-accept option required for bgp-evpn
+ifupdown2 (1.1.2) UNRELEASED; urgency=medium
- * config: keep addon_syntax_check off to allow openvswitch syntax
+ * Fix: checks for invalid address-virtual attributes
+ * New. Deprecated: `mstpctl-stp` attribute
+ * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
+ * New. Enabled: addon module for configuring vrf
+ * New. Enabled: bridge: display warning when (in vlan unware bridge)
+ an untagged bridge is not configured
+ * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
+ * New. Enabled: introduce checks for reserved vrf table names
+ * New. Enabled: ifquery: new option '--with-defaults' to include default
+ attributes
+ * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
+ * New. Enabled: vrf awareness in dhcp addon module
- -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 14:29:11 +0100
+ -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
-ifupdown2 (1.2.8-1+pve3) pve; urgency=medium
+ifupdown2 (1.1) unstable; urgency=low
- * re-add config tuning patch to allow multiple VLAN aware bridges and
- allow `ovs_*` options to co-exist
+ * Initial release.
- -- Proxmox Support Team <support@proxmox.com> Fri, 30 Aug 2019 06:58:55 +0200
-
-ifupdown2 (1.2.8-1+pve2) pve; urgency=medium
-
- * restore the behavior to not remove (tap|veth|fwpr) interfaces from bridges
- on ifup
-
- -- Proxmox Support Team <support@proxmox.com> Wed, 28 Aug 2019 16:43:11 +0200
-
-ifupdown2 (1.2.8-1+pve1) pve; urgency=medium
-
- * update to upstream 1.2.8-1 release
-
- -- Proxmox Support Team <support@proxmox.com> Wed, 28 Aug 2019 11:06:45 +0200
-
-ifupdown2 (1.2.5-2+pve1) pve; urgency=medium
-
- * don't remove bridge if tap|veth|fw are connected
- * ifup/ifdown vxlan interface on reload
- * update to current upstream master
- * add uplink-id option
-
- -- Proxmox Support Team <support@proxmox.com> Tue, 18 Jun 2019 10:22:34 +0200
-
-ifupdown2 (1.2.5-1+pvetest1) unstable; urgency=medium
-
- * Update to 1.2.5-1
-
- -- Proxmox Support Team <support@proxmox.com> Tue, 16 Apr 2019 10:00:00 +0200
-
-ifupdown2 (1.2.2-1+pvetest1) unstable; urgency=medium
-
- * Update to 1.2.2
-
- -- Proxmox Support Team <support@proxmox.com> Mon, 31 Dec 2018 09:00:00 +0200
-
-ifupdown2 (1.2.0-1+pvetest1) unstable; urgency=medium
-
- * Update to 1.2.0 tag with some fixups from master-next
-
- -- Proxmox Support Team <support@proxmox.com> Tue, 03 Jul 2018 10:47:42 +0200
-
-ifupdown2 (1.2.0-1~pvetest3) unstable; urgency=medium
-
- * allow specifying addresses on vlan aware bridges
-
- -- Proxmox Support Team <support@proxmox.com> Mon, 18 Jun 2018 10:05:00 +0200
-
-ifupdown2 (1.2.0-1~pvetest2) unstable; urgency=medium
-
- * readd patch for vxlan/anycast support
-
- -- Proxmox Support Team <support@proxmox.com> Mon, 18 Jun 2018 09:56:51 +0200
-
-ifupdown2 (1.2.0-1~pvetest1) unstable; urgency=medium
-
- * Initial 1.2.0 package
-
- -- Proxmox Support Team <support@proxmox.com> Fri, 15 Jun 2018 09:14:59 +0200
+ -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700
projects / ifupdown2.git / commitdiff