--- /dev/null
+
+What is imacfb?
+===============
+
+This is a generic EFI platform driver for Intel based Apple computers.
+Imacfb is only for EFI booted Intel Macs.
+
+Supported Hardware
+==================
+
+iMac 17"/20"
+Macbook
+Macbook Pro 15"/17"
+MacMini
+
+How to use it?
+==============
+
+Imacfb does not have any kind of autodetection of your machine.
+You have to add the fillowing kernel parameters in your elilo.conf:
+ Macbook :
+ video=imacfb:macbook
+ MacMini :
+ video=imacfb:mini
+ Macbook Pro 15", iMac 17" :
+ video=imacfb:i17
+ Macbook Pro 17", iMac 20" :
+ video=imacfb:i20
+
+--
+Edgar Hucek <gimli@dark-green.com>
- default_attrs: Default attributes to be exported via sysfs when the
object is registered.Note that the last attribute has to be
initialized to NULL ! You can find a complete implementation
- in drivers/block/genhd.c
+ in block/genhd.c
Instances of struct kobj_type are not registered; only referenced by
Default: 87380*2 bytes.
tcp_mem - vector of 3 INTEGERs: min, pressure, max
- low: below this number of pages TCP is not bothered about its
+ min: below this number of pages TCP is not bothered about its
memory appetite.
pressure: when amount of memory allocated by TCP exceeds this number
of pages, TCP moderates its memory consumption and enters memory
pressure mode, which is exited when memory consumption falls
- under "low".
+ under "min".
- high: number of pages allowed for queueing by all TCP sockets.
+ max: number of pages allowed for queueing by all TCP sockets.
Defaults are calculated at boot time from amount of available
memory.
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- - address : List of bytes representing the ethernet address of
+ - mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
- address = [ 00 E0 0C 00 73 01 ];
+ mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
- address = [ 00 E0 0C 00 73 02 ];
+ mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
L: stable@kernel.org
S: Maintained
+STABLE BRANCH:
+P: Greg Kroah-Hartman
+M: greg@kroah.com
+P: Chris Wright
+M: chrisw@sous-sol.org
+L: stable@kernel.org
+S: Maintained
+
TPM DEVICE DRIVER
P: Kylene Hall
M: kjhall@us.ibm.com
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
-# Force gcc to behave correct even for buggy distributions
-CFLAGS += $(call cc-option, -fno-stack-protector)
-
AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
+ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include include/config/auto.conf.cmd
--include include/config/auto.conf
# To avoid any implicit rule to kick in, define an empty command
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
-ifeq ($(KBUILD_EXTMOD),)
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
- $(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
-endif
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+ $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
+ echo; \
+ echo " ERROR: Kernel configuration is invalid."; \
+ echo " include/linux/autoconf.h or $@ are missing."; \
+ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo; \
+ /bin/false)
+
+endif # KBUILD_EXTMOD
else
# Dummy target needed, because used as prerequisite
include/config/auto.conf: ;
-endif
+endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
CFLAGS += -O2
endif
+include $(srctree)/arch/$(ARCH)/Makefile
+
ifdef CONFIG_FRAME_POINTER
CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
CFLAGS += -g
endif
-include $(srctree)/arch/$(ARCH)/Makefile
+# Force gcc to behave correct even for buggy distributions
+CFLAGS += $(call cc-option, -fno-stack-protector)
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
rtc_time_to_tm(next_time, next);
}
}
+EXPORT_SYMBOL(rtc_next_alarm_time);
static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
{
spin_unlock_irq(&die_lock);
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
do_exit(SIGSEGV);
}
return -EIO;
}
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);
.width = 2,
};
-static struct gtw5715_flash_resource = {
+static struct resource gtwx5715_flash_resource = {
.flags = IORESOURCE_MEM,
-}
+};
static struct platform_device gtwx5715_flash = {
.name = "IXP4XX-Flash",
{
ixp4xx_sys_init();
- if (!flash_resource)
- printk(KERN_ERR "Could not allocate flash resource\n");
-
gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
panic("Fatal exception in interrupt");
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
oops_exit();
do_exit(SIGSEGV);
spin_unlock_irq(&die.lock);
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
do_exit(SIGSEGV);
}
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
- || MPC7448HPC2
- default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+ || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+ default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+ && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
--- /dev/null
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8641HPCN";
+ compatible = "mpc86xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ 32-bit;
+ linux,boot-cpu;
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 40000000>; // 1G at 0x0
+ };
+
+ soc8641@f8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 f8000000 00100000>;
+ reg = <f8000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <2b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <2b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <4a 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <4a 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@2 {
+ linux,phandle = <2452002>;
+ interrupt-parent = <40000>;
+ interrupts = <4a 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <4a 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <1d 2 1e 2 22 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <23 2 24 2 28 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ mac-address = [ 00 E0 0C 00 02 FD ];
+ interrupts = <1F 2 20 2 21 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452002>;
+ };
+
+ ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <27000 1000>;
+ mac-address = [ 00 E0 0C 00 03 FD ];
+ interrupts = <25 2 26 2 27 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452003>;
+ };
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <2a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <1c 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ compatible = "86xx";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ bus-range = <0 fe>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <40000>;
+ interrupts = <18 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 */
+ 8800 0 0 1 4d0 3 2
+ 8800 0 0 2 4d0 4 2
+ 8800 0 0 3 4d0 5 2
+ 8800 0 0 4 4d0 6 2
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 4d0 4 2
+ 9000 0 0 2 4d0 5 2
+ 9000 0 0 3 4d0 6 2
+ 9000 0 0 4 4d0 3 2
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 4d0 0 0
+ 9800 0 0 2 4d0 0 0
+ 9800 0 0 3 4d0 0 0
+ 9800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x14 */
+ a000 0 0 1 4d0 0 0
+ a000 0 0 2 4d0 0 0
+ a000 0 0 3 4d0 0 0
+ a000 0 0 4 4d0 0 0
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 4d0 0 0
+ a800 0 0 2 4d0 0 0
+ a800 0 0 3 4d0 0 0
+ a800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 4d0 0 0
+ b000 0 0 2 4d0 0 0
+ b000 0 0 3 4d0 0 0
+ b000 0 0 4 4d0 0 0
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 4d0 0 0
+ b800 0 0 2 4d0 0 0
+ b800 0 0 3 4d0 0 0
+ b800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 4d0 0 0
+ c000 0 0 2 4d0 0 0
+ c000 0 0 3 4d0 0 0
+ c000 0 0 4 4d0 0 0
+
+ /* IDSEL 0x19 */
+ c800 0 0 1 4d0 0 0
+ c800 0 0 2 4d0 0 0
+ c800 0 0 3 4d0 0 0
+ c800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x1a */
+ d000 0 0 1 4d0 6 2
+ d000 0 0 2 4d0 3 2
+ d000 0 0 3 4d0 4 2
+ d000 0 0 4 4d0 5 2
+
+
+ /* IDSEL 0x1b */
+ d800 0 0 1 4d0 5 2
+ d800 0 0 2 4d0 0 0
+ d800 0 0 3 4d0 0 0
+ d800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x1c */
+ e000 0 0 1 4d0 9 2
+ e000 0 0 2 4d0 a 2
+ e000 0 0 3 4d0 c 2
+ e000 0 0 4 4d0 7 2
+
+ /* IDSEL 0x1d */
+ e800 0 0 1 4d0 9 2
+ e800 0 0 2 4d0 a 2
+ e800 0 0 3 4d0 b 2
+ e800 0 0 4 4d0 0 0
+
+ /* IDSEL 0x1e */
+ f000 0 0 1 4d0 c 2
+ f000 0 0 2 4d0 0 0
+ f000 0 0 3 4d0 0 0
+ f000 0 0 4 4d0 0 0
+
+ /* IDSEL 0x1f */
+ f800 0 0 1 4d0 6 2
+ f800 0 0 2 4d0 0 0
+ f800 0 0 3 4d0 0 0
+ f800 0 0 4 4d0 0 0
+ >;
+ i8259@4d0 {
+ linux,phandle = <4d0>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <49 2>;
+ interrupt-parent = <40000>;
+ };
+
+ };
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ interrupts = <
+ 10 2 11 2 12 2 13 2
+ 14 2 15 2 16 2 17 2
+ 18 2 19 2 1a 2 1b 2
+ 1c 2 1d 2 1e 2 1f 2
+ 20 2 21 2 22 2 23 2
+ 24 2 25 2 26 2 27 2
+ 28 2 29 2 2a 2 2b 2
+ 2c 2 2d 2 2e 2 2f 2
+ 30 2 31 2 32 2 33 2
+ 34 2 35 2 36 2 37 2
+ 38 2 39 2 2a 2 3b 2
+ 3c 2 3d 2 3e 2 3f 2
+ 48 1 49 2 4a 1
+ >;
+ interrupt-parent = <40000>;
+ };
+ };
+};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 13:24:37 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:12:29 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
# Macintosh device drivers
#
CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
+# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
#
# USB devices
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:46:44 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:15:46 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PPC_ISERIES=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_LPARCFG=y
# CONFIG_NUMA is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
+# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sun May 28 07:26:56 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:14:48 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_MPIC=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
pci_direct_iommu.o iomap.o
pci32-$(CONFIG_PPC32) := pci_32.o
obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
-kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o
+kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y)
+obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
mfspr r0,SPRN_HID0
li r11,5 /* clear DOZE and SLEEP */
rldimi r0,r11,52,8 /* set NAP and DPM */
+ li r11,0
+ rldimi r0,r11,32,31 /* clear EN_ATTN */
mtspr SPRN_HID0,r0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
/* This keeps a track of which one is crashing cpu. */
int crashing_cpu = -1;
static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
size_t data_len)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 1);
+
+#ifdef CONFIG_PPC64
kexec_smp_wait();
+#else
+ for (;;); /* FIXME */
+#endif
+
/* NOTREACHED */
}
*
* do this if kexec in setup.c ?
*/
+#ifdef CONFIG_PPC64
smp_release_cpus();
+#else
+ /* FIXME */
+#endif
}
void crash_kexec_secondary(struct pt_regs *regs)
/* If not there, try to insert it */
virq = irq_find_mapping(host, hwirq);
if (virq != NO_IRQ)
- radix_tree_insert(tree, virq, &irq_map[virq]);
+ radix_tree_insert(tree, hwirq, &irq_map[virq]);
bail:
spin_unlock_irqrestore(&irq_big_lock, flags);
return virq;
if (!ret) {
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
+ flush_icache_range((unsigned long)p->ainsn.insn,
+ (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
}
return ret;
#include <linux/reboot.h>
#include <linux/threads.h>
#include <asm/machdep.h>
+#include <asm/lmb.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
}
for(;;);
}
+
+static int __init early_parse_crashk(char *p)
+{
+ unsigned long size;
+
+ if (!p)
+ return 1;
+
+ size = memparse(p, &p);
+
+ if (*p == '@')
+ crashk_res.start = memparse(p + 1, &p);
+ else
+ crashk_res.start = KDUMP_KERNELBASE;
+
+ crashk_res.end = crashk_res.start + size - 1;
+
+ return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+ unsigned long size;
+
+ if (crashk_res.start == 0)
+ return;
+
+ /* We might have got these values via the command line or the
+ * device tree, either way sanitise them now. */
+
+ size = crashk_res.end - crashk_res.start + 1;
+
+ if (crashk_res.start != KDUMP_KERNELBASE)
+ printk("Crash kernel location must be 0x%x\n",
+ KDUMP_KERNELBASE);
+
+ crashk_res.start = KDUMP_KERNELBASE;
+ size = PAGE_ALIGN(size);
+ crashk_res.end = crashk_res.start + size - 1;
+
+ /* Crash kernel trumps memory limit */
+ if (memory_limit && memory_limit <= crashk_res.end) {
+ memory_limit = crashk_res.end + 1;
+ printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+ memory_limit);
+ }
+
+ lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+ return (start + size) > crashk_res.start && start <= crashk_res.end;
+}
*/
-#include <linux/cpumask.h>
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/paca.h>
-#include <asm/lmb.h>
#include <asm/mmu.h>
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
return 0;
}
__initcall(kexec_setup);
-
-static int __init early_parse_crashk(char *p)
-{
- unsigned long size;
-
- if (!p)
- return 1;
-
- size = memparse(p, &p);
-
- if (*p == '@')
- crashk_res.start = memparse(p + 1, &p);
- else
- crashk_res.start = KDUMP_KERNELBASE;
-
- crashk_res.end = crashk_res.start + size - 1;
-
- return 0;
-}
-early_param("crashkernel", early_parse_crashk);
-
-void __init reserve_crashkernel(void)
-{
- unsigned long size;
-
- if (crashk_res.start == 0)
- return;
-
- /* We might have got these values via the command line or the
- * device tree, either way sanitise them now. */
-
- size = crashk_res.end - crashk_res.start + 1;
-
- if (crashk_res.start != KDUMP_KERNELBASE)
- printk("Crash kernel location must be 0x%x\n",
- KDUMP_KERNELBASE);
-
- crashk_res.start = KDUMP_KERNELBASE;
- size = PAGE_ALIGN(size);
- crashk_res.end = crashk_res.start + size - 1;
-
- /* Crash kernel trumps memory limit */
- if (memory_limit && memory_limit <= crashk_res.end) {
- memory_limit = crashk_res.end + 1;
- printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
- memory_limit);
- }
-
- lmb_reserve(crashk_res.start, size);
-}
-
-int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
- return (start + size) > crashk_res.start && start <= crashk_res.end;
-}
}
EXPORT_SYMBOL(rtas_set_indicator);
+/*
+ * Ignoring RTAS extended delay
+ */
+int rtas_set_indicator_fast(int indicator, int index, int new_value)
+{
+ int rc;
+ int token = rtas_token("set-indicator");
+
+ if (token == RTAS_UNKNOWN_SERVICE)
+ return -ENOENT;
+
+ rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
+
+ WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905));
+
+ if (rc < 0)
+ return rtas_error_rc(rc);
+
+ return rc;
+}
+
void rtas_restart(char *cmd)
{
if (rtas_flash_term_hook)
#ifdef CONFIG_PPC64 /* XXX */
#define _IO_BASE pci_io_base
-#ifdef CONFIG_KEXEC
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
-#endif
#endif
#ifdef CONFIG_DEBUGGER
panic("Fatal exception in interrupt");
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
do_exit(err);
die("System Reset", regs, SIGABRT);
+ /*
+ * Some CPUs when released from the debugger will execute this path.
+ * These CPUs entered the debugger via a soft-reset. If the CPU was
+ * hung before entering the debugger it will return to the hung
+ * state when exiting this function. This causes a problem in
+ * kdump since the hung CPU(s) will not respond to the IPI sent
+ * from kdump. To prevent the problem we call crash_kexec_secondary()
+ * here. If a kdump had not been initiated or we exit the debugger
+ * with the "exit and recover" command (x) crash_kexec_secondary()
+ * will return after 5ms and the CPU returns to its previous state.
+ */
+ crash_kexec_secondary(regs);
+
/* Must die if the interrupt is not recoverable */
if (!(regs->msr & MSR_RI))
panic("Unrecoverable System Reset");
{
unsigned long set, reset;
- power4_enable_pmcs();
-
set = 1UL << 63;
reset = 0;
plpar_hcall_norets(H_PERFMON, set, reset);
*
* XXX: undo of teardown on kexec needs this too, as may hotplug
*/
- rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+ rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
}
* so leave the master cpu in the group.
*/
if (secondary)
- rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+ rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
(1UL << interrupt_server_size) - 1 -
default_distrib_server, 0);
}
xics_set_cpu_priority(cpu, 0);
/* remove ourselves from the global interrupt queue */
- status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+ status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
WARN_ON(status < 0);
goto err;
}
- mac_addr = get_property(np, "address", NULL);
- memcpy(gfar_data.mac_addr, mac_addr, 6);
+ mac_addr = get_property(np, "local-mac-address", NULL);
+ if (mac_addr == NULL)
+ mac_addr = get_property(np, "mac-address", NULL);
+ if (mac_addr == NULL) {
+ /* Obsolete */
+ mac_addr = get_property(np, "address", NULL);
+ }
+
+ if (mac_addr)
+ memcpy(gfar_data.mac_addr, mac_addr, 6);
if (model && !strcasecmp(model, "TSEC"))
gfar_data.device_flags =
}
#ifdef CONFIG_HOTPLUG_CPU
-static int
+static int __cpuinit
appldata_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
/*
* pg_table is physical at this point
*/
- pg_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ pg_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
pg_dir->pgd0 = (_PAGE_TABLE | __pa(pg_table));
pg_dir->pgd1 = (_PAGE_TABLE | (__pa(pg_table)+1024));
continue;
}
- pm_dir = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE*4);
+ pm_dir = (pmd_t *) alloc_bootmem_pages(PAGE_SIZE * 4);
pgd_populate(&init_mm, pg_dir, pm_dir);
for (j = 0 ; j < PTRS_PER_PMD ; j++,pm_dir++) {
continue;
}
- pt_dir = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+ pt_dir = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
for (k = 0 ; k < PTRS_PER_PTE ; k++,pt_dir++) {
/* Nest count reaches zero, release the lock. */
spin_unlock_irqrestore(&die_lock, flags);
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
}
void __kprobes __die(const char * str, struct pt_regs * regs, long err)
panic("Fatal exception in interrupt");
if (panic_on_oops)
- panic("Fatal exception: panic_on_oops");
+ panic("Fatal exception");
do_exit(err);
}
comment "Watchdog Device Drivers"
depends on WATCHDOG
-# Architecture Independant
+# Architecture Independent
config SOFT_WATCHDOG
tristate "Software watchdog"
enabled.
The driver is limited by the speed of the system's PCLK
- signal, so with reasonbaly fast systems (PCLK around 50-66MHz)
+ signal, so with reasonably fast systems (PCLK around 50-66MHz)
then watchdog intervals of over approximately 20seconds are
unavailable.
is no way to know if writing to its IO address will corrupt
your system or have any real effect. The only way to be sure
that this driver does what you want is to make sure you
- are runnning it on an EPX-C3 from Winsystems with the watchdog
+ are running it on an EPX-C3 from Winsystems with the watchdog
timer at IO address 0x1ee and 0x1ef. It will write to both those
IO ports. Basically, the assumption is made that if you compile
this driver into your kernel and/or load it as a module, that you
tristate "Indy/I2 Hardware Watchdog"
depends on WATCHDOG && SGI_IP22
help
- Hardwaredriver for the Indy's/I2's watchdog. This is a
+ Hardware driver for the Indy's/I2's watchdog. This is a
watchdog timer that will reboot the machine after a 60 second
timer expired and no process has written to /dev/watchdog during
that time.
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ },{ /* 15 */
+ .name = "JMB361",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 16 */
+ .name = "JMB363",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 17 */
+ .name = "JMB365",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 18 */
+ .name = "JMB366",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 19 */
+ .name = "JMB368",
+ .init_hwif = init_hwif_generic,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
}
};
return -EINVAL;
}
+ m->ti = ti;
+
r = parse_features(&as, m, ti);
if (r)
goto bad;
}
ti->private = m;
- m->ti = ti;
return 0;
state->bandwidth = bandwidth;
if (state->dst_type != DST_TYPE_IS_TERR)
- return 0;
+ return -EOPNOTSUPP;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
state->symbol_rate = srate;
if (state->dst_type == DST_TYPE_IS_TERR) {
- return 0;
+ return -EOPNOTSUPP;
}
dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
srate /= 1000;
static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
{
if (state->dst_type != DST_TYPE_IS_CABLE)
- return 0;
+ return -EOPNOTSUPP;
state->modulation = modulation;
switch (modulation) {
goto error;
}
if (write_dst(state, data, len)) {
- dprintk(verbose, DST_INFO, 1, "Tring to recover.. ");
+ dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
goto error;
{
u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
- if (state->dst_type == DST_TYPE_IS_TERR)
- return 0;
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
paket[4] = state->tx_tuna[4];
paket[2] = state->tx_tuna[2];
paket[3] = state->tx_tuna[3];
paket[7] = dst_check_sum (paket, 7);
- dst_command(state, paket, 8);
-
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_get_tuna(struct dst_state *state)
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
if (cmd->msg_len > 0 && cmd->msg_len < 5)
memcpy(&paket[3], cmd->msg, cmd->msg_len);
else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
else
return -EINVAL;
paket[7] = dst_check_sum(&paket[0], 7);
- dst_command(state, paket, 8);
- return 0;
+ return dst_command(state, paket, 8);
}
static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- int need_cmd;
+ int need_cmd, retval = 0;
struct dst_state *state = fe->demodulator_priv;
state->voltage = voltage;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
need_cmd = 0;
}
if (need_cmd)
- dst_tone_power_cmd(state);
+ retval = dst_tone_power_cmd(state);
- return 0;
+ return retval;
}
static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
state->tone = tone;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
switch (tone) {
case SEC_TONE_OFF:
default:
return -EINVAL;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
struct dst_state *state = fe->demodulator_priv;
if (state->dst_type != DST_TYPE_IS_SAT)
- return 0;
+ return -EOPNOTSUPP;
state->minicmd = minicmd;
switch (minicmd) {
case SEC_MINI_A:
state->tx_tuna[3] = 0xff;
break;
}
- dst_tone_power_cmd(state);
-
- return 0;
+ return dst_tone_power_cmd(state);
}
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*strength = state->decode_strength;
- return 0;
+ return retval;
}
static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct dst_state *state = fe->demodulator_priv;
- dst_get_signal(state);
+ int retval = dst_get_signal(state);
*snr = state->decode_snr;
- return 0;
+ return retval;
}
static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
{
+ int retval = -EINVAL;
struct dst_state *state = fe->demodulator_priv;
if (p != NULL) {
- dst_set_freq(state, p->frequency);
+ retval = dst_set_freq(state, p->frequency);
+ if(retval != 0)
+ return retval;
dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
if (state->dst_type == DST_TYPE_IS_SAT) {
dst_set_symbolrate(state, p->u.qam.symbol_rate);
dst_set_modulation(state, p->u.qam.modulation);
}
- dst_write_tuna(fe);
+ retval = dst_write_tuna(fe);
}
- return 0;
+ return retval;
}
static int dst_tune_frontend(struct dvb_frontend* fe,
# Makefile for the kernel DVB device drivers.
#
-dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
- dvb_ca_en50221.o dvb_frontend.o \
- dvb_net.o dvb_ringbuffer.o dvb_math.o
+dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
+ dvb_ca_en50221.o dvb_frontend.o \
+ dvb_net.o dvb_ringbuffer.o dvb_math.o
obj-$(CONFIG_DVB_CORE) += dvb-core.o
help
Enter the I/O port of your Zoltrix radio card.
-endmenu
+config USB_DSBR
+ tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+endmenu
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
+obj-$(CONFIG_USB_DSBR) += dsbr100.o
EXTRA_CFLAGS += -Isound
--- /dev/null
+/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs
+ into both the USB and an analog audio input, so this thing
+ only deals with initialisation and frequency setting, the
+ audio data has to be handled by a sound driver.
+
+ Major issue: I can't find out where the device reports the signal
+ strength, and indeed the windows software appearantly just looks
+ at the stereo indicator as well. So, scanning will only find
+ stereo stations. Sad, but I can't help it.
+
+ Also, the windows program sends oodles of messages over to the
+ device, and I couldn't figure out their meaning. My suspicion
+ is that they don't have any:-)
+
+ You might find some interesting stuff about this module at
+ http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
+
+ Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ History:
+
+ Version 0.40:
+ Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
+
+ Version 0.30:
+ Markus: Updates for 2.5.x kernel and more ISO compliant source
+
+ Version 0.25:
+ PSL and Markus: Cleanup, radio now doesn't stop on device close
+
+ Version 0.24:
+ Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
+ right. Some minor cleanup, improved standalone compilation
+
+ Version 0.23:
+ Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
+
+ Version 0.22:
+ Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
+ thanks to Mike Cox for pointing the problem out.
+
+ Version 0.21:
+ Markus: Minor cleanup, warnings if something goes wrong, lame attempt
+ to adhere to Documentation/CodingStyle
+
+ Version 0.2:
+ Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
+ Markus: Copyright clarification
+
+ Version 0.01: Markus: initial release
+
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.40"
+#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
+#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
+
+#define DSB100_VENDOR 0x04b4
+#define DSB100_PRODUCT 0x1002
+
+/* Commands the device appears to understand */
+#define DSB100_TUNE 1
+#define DSB100_ONOFF 2
+
+#define TB_LEN 16
+
+/* Frequency limits in MHz -- these are European values. For Japanese
+devices, that would be 76 and 91. */
+#define FREQ_MIN 87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+
+static int usb_dsbr100_probe(struct usb_interface *intf,
+ const struct usb_device_id *id);
+static void usb_dsbr100_disconnect(struct usb_interface *intf);
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static int usb_dsbr100_open(struct inode *inode, struct file *file);
+static int usb_dsbr100_close(struct inode *inode, struct file *file);
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+
+/* Data for one (physical) device */
+typedef struct {
+ struct usb_device *usbdev;
+ struct video_device *videodev;
+ unsigned char transfer_buffer[TB_LEN];
+ int curfreq;
+ int stereo;
+ int users;
+ int removed;
+} dsbr100_device;
+
+
+/* File system interface */
+static struct file_operations usb_dsbr100_fops = {
+ .owner = THIS_MODULE,
+ .open = usb_dsbr100_open,
+ .release = usb_dsbr100_close,
+ .ioctl = usb_dsbr100_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek,
+};
+
+/* V4L interface */
+static struct video_device dsbr100_videodev_template=
+{
+ .owner = THIS_MODULE,
+ .name = "D-Link DSB-R 100",
+ .type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_AZTECH,
+ .fops = &usb_dsbr100_fops,
+ .release = video_device_release,
+};
+
+static struct usb_device_id usb_dsbr100_device_table [] = {
+ { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_dsbr100_driver = {
+ .name = "dsbr100",
+ .probe = usb_dsbr100_probe,
+ .disconnect = usb_dsbr100_disconnect,
+ .id_table = usb_dsbr100_device_table,
+};
+
+/* Low-level device interface begins here */
+
+/* switch on radio */
+static int dsbr100_start(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_ONOFF,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
+ return -1;
+ return (radio->transfer_buffer)[0];
+}
+
+
+/* switch off radio */
+static int dsbr100_stop(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_ONOFF,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
+ return -1;
+ return (radio->transfer_buffer)[0];
+}
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int dsbr100_setfreq(dsbr100_device *radio, int freq)
+{
+ freq = (freq/16*80)/1000+856;
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_TUNE,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ (freq>>8)&0x00ff, freq&0xff,
+ radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
+ radio->stereo = -1;
+ return -1;
+ }
+ radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
+ return (radio->transfer_buffer)[0];
+}
+
+/* return the device status. This is, in effect, just whether it
+sees a stereo signal or not. Pity. */
+static void dsbr100_getstat(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
+ radio->stereo = -1;
+ else
+ radio->stereo = ! (radio->transfer_buffer[0]&0x01);
+}
+
+
+/* USB subsystem interface begins here */
+
+/* check if the device is present and register with v4l and
+usb if it is */
+static int usb_dsbr100_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ dsbr100_device *radio;
+
+ if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
+ return -ENOMEM;
+ if (!(radio->videodev = video_device_alloc())) {
+ kfree(radio);
+ return -ENOMEM;
+ }
+ memcpy(radio->videodev, &dsbr100_videodev_template,
+ sizeof(dsbr100_videodev_template));
+ radio->removed = 0;
+ radio->users = 0;
+ radio->usbdev = interface_to_usbdev(intf);
+ radio->curfreq = FREQ_MIN*FREQ_MUL;
+ video_set_drvdata(radio->videodev, radio);
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
+ radio_nr)) {
+ warn("Could not register video device");
+ video_device_release(radio->videodev);
+ kfree(radio);
+ return -EIO;
+ }
+ usb_set_intfdata(intf, radio);
+ return 0;
+}
+
+/* handle unplugging of the device, release data structures
+if nothing keeps us from doing it. If something is still
+keeping us busy, the release callback of v4l will take care
+of releasing it. stv680.c does not relase its private
+data, so I don't do this here either. Checking out the
+code I'd expect I better did that, but if there's a memory
+leak here it's tiny (~50 bytes per disconnect) */
+static void usb_dsbr100_disconnect(struct usb_interface *intf)
+{
+ dsbr100_device *radio = usb_get_intfdata(intf);
+
+ usb_set_intfdata (intf, NULL);
+ if (radio) {
+ video_unregister_device(radio->videodev);
+ radio->videodev = NULL;
+ if (radio->users) {
+ kfree(radio);
+ } else {
+ radio->removed = 1;
+ }
+ }
+}
+
+
+/* Video for Linux interface */
+
+static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ if (!radio)
+ return -EIO;
+
+ switch(cmd) {
+ case VIDIOCGCAP: {
+ struct video_capability *v = arg;
+
+ memset(v, 0, sizeof(*v));
+ v->type = VID_TYPE_TUNER;
+ v->channels = 1;
+ v->audios = 1;
+ strcpy(v->name, "D-Link R-100 USB FM Radio");
+ return 0;
+ }
+ case VIDIOCGTUNER: {
+ struct video_tuner *v = arg;
+
+ dsbr100_getstat(radio);
+ if(v->tuner) /* Only 1 tuner */
+ return -EINVAL;
+ v->rangelow = FREQ_MIN*FREQ_MUL;
+ v->rangehigh = FREQ_MAX*FREQ_MUL;
+ v->flags = VIDEO_TUNER_LOW;
+ v->mode = VIDEO_MODE_AUTO;
+ v->signal = radio->stereo*0x7000;
+ /* Don't know how to get signal strength */
+ v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
+ strcpy(v->name, "DSB R-100");
+ return 0;
+ }
+ case VIDIOCSTUNER: {
+ struct video_tuner *v = arg;
+
+ if(v->tuner!=0)
+ return -EINVAL;
+ /* Only 1 tuner so no setting needed ! */
+ return 0;
+ }
+ case VIDIOCGFREQ: {
+ int *freq = arg;
+
+ if (radio->curfreq==-1)
+ return -EINVAL;
+ *freq = radio->curfreq;
+ return 0;
+ }
+ case VIDIOCSFREQ: {
+ int *freq = arg;
+
+ radio->curfreq = *freq;
+ if (dsbr100_setfreq(radio, radio->curfreq)==-1)
+ warn("Set frequency failed");
+ return 0;
+ }
+ case VIDIOCGAUDIO: {
+ struct video_audio *v = arg;
+
+ memset(v, 0, sizeof(*v));
+ v->flags |= VIDEO_AUDIO_MUTABLE;
+ v->mode = VIDEO_SOUND_STEREO;
+ v->volume = 1;
+ v->step = 1;
+ strcpy(v->name, "Radio");
+ return 0;
+ }
+ case VIDIOCSAUDIO: {
+ struct video_audio *v = arg;
+
+ if (v->audio)
+ return -EINVAL;
+ if (v->flags&VIDEO_AUDIO_MUTE) {
+ if (dsbr100_stop(radio)==-1)
+ warn("Radio did not respond properly");
+ }
+ else
+ if (dsbr100_start(radio)==-1)
+ warn("Radio did not respond properly");
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
+}
+
+static int usb_dsbr100_open(struct inode *inode, struct file *file)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ radio->users = 1;
+ if (dsbr100_start(radio)<0) {
+ warn("Radio did not start up properly");
+ radio->users = 0;
+ return -EIO;
+ }
+ dsbr100_setfreq(radio, radio->curfreq);
+ return 0;
+}
+
+static int usb_dsbr100_close(struct inode *inode, struct file *file)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ if (!radio)
+ return -ENODEV;
+ radio->users = 0;
+ if (radio->removed) {
+ kfree(radio);
+ }
+ return 0;
+}
+
+static int __init dsbr100_init(void)
+{
+ int retval = usb_register(&usb_dsbr100_driver);
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return retval;
+}
+
+static void __exit dsbr100_exit(void)
+{
+ usb_deregister(&usb_dsbr100_driver);
+}
+
+module_init (dsbr100_init);
+module_exit (dsbr100_exit);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
source "drivers/media/video/em28xx/Kconfig"
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
-obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_IBMCAM) += usbvideo/
obj-$(CONFIG_USB_KONICAWC) += usbvideo/
obj-$(CONFIG_USB_VICAM) += usbvideo/
+obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
#ifdef CONFIG_COMPAT
-
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner32 {
compat_int_t tuner;
char name[32];
compat_caddr_t clips;
compat_int_t clipcount;
};
+#endif
static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* You get back everything except the clips... */
static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
{
return -EFAULT;
return 0;
}
+#endif
struct v4l2_clip32
{
return 0;
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_code32
{
char loadwhat[16]; /* name or tag of file being passed */
#define VIDIOCSFREQ32 _IOW('v',15, u32)
#define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32)
+#endif
+
/* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */
#define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4)
#define VIDIOC_G_FMT32 _IOWR ('V', 4, struct v4l2_format32)
#define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t)
#define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32)
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
enum {
MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip)
};
return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw);
}
+#endif
static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
union {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner vt;
struct video_buffer vb;
struct video_window vw;
struct video_code vc;
+#endif
struct v4l2_format v2f;
struct v4l2_buffer v2b;
struct v4l2_framebuffer v2fb;
/* First, convert the command. */
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
+ case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
+#endif
case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break;
case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break;
- case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
};
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
case VIDIOCGTUNER:
err = get_video_tuner32(&karg.vt, up);
break;
case VIDIOCSFREQ:
+#endif
case VIDIOC_S_INPUT:
case VIDIOC_OVERLAY:
case VIDIOC_STREAMON:
compatible_arg = 0;
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGWIN:
case VIDIOCGFBUF:
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_FBUF:
case VIDIOC_G_INPUT:
compatible_arg = 0;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSMICROCODE:
err = microcode32(&karg.vc, up);
compatible_arg = 0;
break;
+#endif
};
-
if(err)
goto out;
}
if(err == 0) {
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER:
err = put_video_tuner32(&karg.vt, up);
break;
case VIDIOCGFBUF:
err = put_video_buffer32(&karg.vb, up);
break;
-
+#endif
case VIDIOC_G_FBUF:
err = put_v4l2_framebuffer32(&karg.v2fb, up);
break;
err = put_v4l2_input32(&karg.v2i, up);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_INPUT:
err = put_user(((u32)karg.vx), (u32 __user *)up);
break;
return ret;
switch (cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSWIN32:
ret = do_set_window(file, cmd, arg);
break;
case VIDIOCSFBUF32:
case VIDIOCGFREQ32:
case VIDIOCSFREQ32:
+#endif
case VIDIOC_QUERYCAP:
case VIDIOC_ENUM_FMT:
case VIDIOC_G_FMT32:
ret = do_video_ioctl(file, cmd, arg);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Little v, the video4linux ioctls (conflict?) */
case VIDIOCGCAP:
case VIDIOCGCHAN:
case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
break;
+#endif
default:
v4l_print_ioctl("compat_ioctl32", cmd);
}
if (i2c_master_recv(client, buffer, 4) < 4)
return 0;
- return (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ return (buffer[3] << 24) | (buffer[2] << 16) |
+ (buffer[1] << 8) | buffer[0];
}
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
struct v4l2_format *f = arg;
return cx8800_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
*id = 0;
return 0;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
{
struct video_tuner *v = arg;
+++ /dev/null
-/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs
- into both the USB and an analog audio input, so this thing
- only deals with initialisation and frequency setting, the
- audio data has to be handled by a sound driver.
-
- Major issue: I can't find out where the device reports the signal
- strength, and indeed the windows software appearantly just looks
- at the stereo indicator as well. So, scanning will only find
- stereo stations. Sad, but I can't help it.
-
- Also, the windows program sends oodles of messages over to the
- device, and I couldn't figure out their meaning. My suspicion
- is that they don't have any:-)
-
- You might find some interesting stuff about this module at
- http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
-
- Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- History:
-
- Version 0.40:
- Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
-
- Version 0.30:
- Markus: Updates for 2.5.x kernel and more ISO compliant source
-
- Version 0.25:
- PSL and Markus: Cleanup, radio now doesn't stop on device close
-
- Version 0.24:
- Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
- right. Some minor cleanup, improved standalone compilation
-
- Version 0.23:
- Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
-
- Version 0.22:
- Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
- thanks to Mike Cox for pointing the problem out.
-
- Version 0.21:
- Markus: Minor cleanup, warnings if something goes wrong, lame attempt
- to adhere to Documentation/CodingStyle
-
- Version 0.2:
- Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
- Markus: Copyright clarification
-
- Version 0.01: Markus: initial release
-
-*/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/usb.h>
-#include <linux/smp_lock.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.40"
-#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
-#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
-
-#define DSB100_VENDOR 0x04b4
-#define DSB100_PRODUCT 0x1002
-
-/* Commands the device appears to understand */
-#define DSB100_TUNE 1
-#define DSB100_ONOFF 2
-
-#define TB_LEN 16
-
-/* Frequency limits in MHz -- these are European values. For Japanese
-devices, that would be 76 and 91. */
-#define FREQ_MIN 87.5
-#define FREQ_MAX 108.0
-#define FREQ_MUL 16000
-
-
-static int usb_dsbr100_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
-static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
-static int usb_dsbr100_open(struct inode *inode, struct file *file);
-static int usb_dsbr100_close(struct inode *inode, struct file *file);
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-/* Data for one (physical) device */
-typedef struct {
- struct usb_device *usbdev;
- struct video_device *videodev;
- unsigned char transfer_buffer[TB_LEN];
- int curfreq;
- int stereo;
- int users;
- int removed;
-} dsbr100_device;
-
-
-/* File system interface */
-static struct file_operations usb_dsbr100_fops = {
- .owner = THIS_MODULE,
- .open = usb_dsbr100_open,
- .release = usb_dsbr100_close,
- .ioctl = usb_dsbr100_ioctl,
- .compat_ioctl = v4l_compat_ioctl32,
- .llseek = no_llseek,
-};
-
-/* V4L interface */
-static struct video_device dsbr100_videodev_template=
-{
- .owner = THIS_MODULE,
- .name = "D-Link DSB-R 100",
- .type = VID_TYPE_TUNER,
- .hardware = VID_HARDWARE_AZTECH,
- .fops = &usb_dsbr100_fops,
- .release = video_device_release,
-};
-
-static struct usb_device_id usb_dsbr100_device_table [] = {
- { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
-
-/* USB subsystem interface */
-static struct usb_driver usb_dsbr100_driver = {
- .name = "dsbr100",
- .probe = usb_dsbr100_probe,
- .disconnect = usb_dsbr100_disconnect,
- .id_table = usb_dsbr100_device_table,
-};
-
-/* Low-level device interface begins here */
-
-/* switch on radio */
-static int dsbr100_start(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
- return -1;
- return (radio->transfer_buffer)[0];
-}
-
-
-/* switch off radio */
-static int dsbr100_stop(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
- return -1;
- return (radio->transfer_buffer)[0];
-}
-
-/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
-static int dsbr100_setfreq(dsbr100_device *radio, int freq)
-{
- freq = (freq/16*80)/1000+856;
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_TUNE,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- (freq>>8)&0x00ff, freq&0xff,
- radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
- radio->stereo = -1;
- return -1;
- }
- radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
- return (radio->transfer_buffer)[0];
-}
-
-/* return the device status. This is, in effect, just whether it
-sees a stereo signal or not. Pity. */
-static void dsbr100_getstat(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
- radio->stereo = -1;
- else
- radio->stereo = ! (radio->transfer_buffer[0]&0x01);
-}
-
-
-/* USB subsystem interface begins here */
-
-/* check if the device is present and register with v4l and
-usb if it is */
-static int usb_dsbr100_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- dsbr100_device *radio;
-
- if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
- return -ENOMEM;
- if (!(radio->videodev = video_device_alloc())) {
- kfree(radio);
- return -ENOMEM;
- }
- memcpy(radio->videodev, &dsbr100_videodev_template,
- sizeof(dsbr100_videodev_template));
- radio->removed = 0;
- radio->users = 0;
- radio->usbdev = interface_to_usbdev(intf);
- radio->curfreq = FREQ_MIN*FREQ_MUL;
- video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
- radio_nr)) {
- warn("Could not register video device");
- video_device_release(radio->videodev);
- kfree(radio);
- return -EIO;
- }
- usb_set_intfdata(intf, radio);
- return 0;
-}
-
-/* handle unplugging of the device, release data structures
-if nothing keeps us from doing it. If something is still
-keeping us busy, the release callback of v4l will take care
-of releasing it. stv680.c does not relase its private
-data, so I don't do this here either. Checking out the
-code I'd expect I better did that, but if there's a memory
-leak here it's tiny (~50 bytes per disconnect) */
-static void usb_dsbr100_disconnect(struct usb_interface *intf)
-{
- dsbr100_device *radio = usb_get_intfdata(intf);
-
- usb_set_intfdata (intf, NULL);
- if (radio) {
- video_unregister_device(radio->videodev);
- radio->videodev = NULL;
- if (radio->users) {
- kfree(radio);
- } else {
- radio->removed = 1;
- }
- }
-}
-
-
-/* Video for Linux interface */
-
-static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- if (!radio)
- return -EIO;
-
- switch(cmd) {
- case VIDIOCGCAP: {
- struct video_capability *v = arg;
-
- memset(v, 0, sizeof(*v));
- v->type = VID_TYPE_TUNER;
- v->channels = 1;
- v->audios = 1;
- strcpy(v->name, "D-Link R-100 USB FM Radio");
- return 0;
- }
- case VIDIOCGTUNER: {
- struct video_tuner *v = arg;
-
- dsbr100_getstat(radio);
- if(v->tuner) /* Only 1 tuner */
- return -EINVAL;
- v->rangelow = FREQ_MIN*FREQ_MUL;
- v->rangehigh = FREQ_MAX*FREQ_MUL;
- v->flags = VIDEO_TUNER_LOW;
- v->mode = VIDEO_MODE_AUTO;
- v->signal = radio->stereo*0x7000;
- /* Don't know how to get signal strength */
- v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
- strcpy(v->name, "DSB R-100");
- return 0;
- }
- case VIDIOCSTUNER: {
- struct video_tuner *v = arg;
-
- if(v->tuner!=0)
- return -EINVAL;
- /* Only 1 tuner so no setting needed ! */
- return 0;
- }
- case VIDIOCGFREQ: {
- int *freq = arg;
-
- if (radio->curfreq==-1)
- return -EINVAL;
- *freq = radio->curfreq;
- return 0;
- }
- case VIDIOCSFREQ: {
- int *freq = arg;
-
- radio->curfreq = *freq;
- if (dsbr100_setfreq(radio, radio->curfreq)==-1)
- warn("Set frequency failed");
- return 0;
- }
- case VIDIOCGAUDIO: {
- struct video_audio *v = arg;
-
- memset(v, 0, sizeof(*v));
- v->flags |= VIDEO_AUDIO_MUTABLE;
- v->mode = VIDEO_SOUND_STEREO;
- v->volume = 1;
- v->step = 1;
- strcpy(v->name, "Radio");
- return 0;
- }
- case VIDIOCSAUDIO: {
- struct video_audio *v = arg;
-
- if (v->audio)
- return -EINVAL;
- if (v->flags&VIDEO_AUDIO_MUTE) {
- if (dsbr100_stop(radio)==-1)
- warn("Radio did not respond properly");
- }
- else
- if (dsbr100_start(radio)==-1)
- warn("Radio did not respond properly");
- return 0;
- }
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
-}
-
-static int usb_dsbr100_open(struct inode *inode, struct file *file)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- radio->users = 1;
- if (dsbr100_start(radio)<0) {
- warn("Radio did not start up properly");
- radio->users = 0;
- return -EIO;
- }
- dsbr100_setfreq(radio, radio->curfreq);
- return 0;
-}
-
-static int usb_dsbr100_close(struct inode *inode, struct file *file)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- if (!radio)
- return -ENODEV;
- radio->users = 0;
- if (radio->removed) {
- kfree(radio);
- }
- return 0;
-}
-
-static int __init dsbr100_init(void)
-{
- int retval = usb_register(&usb_dsbr100_driver);
- info(DRIVER_VERSION ":" DRIVER_DESC);
- return retval;
-}
-
-static void __exit dsbr100_exit(void)
-{
- usb_deregister(&usb_dsbr100_driver);
-}
-
-module_init (dsbr100_init);
-module_exit (dsbr100_exit);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
/* setup the chip*/
msp34xxg_reset(client);
state->std = state->radio ? 0x40 : msp_standard;
- if (state->std != 1)
- goto unmute;
/* start autodetect */
msp_write_dem(client, 0x20, state->std);
+ if (state->std != 1)
+ goto unmute;
/* watch autodetect */
v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
config USB_PWC_DEBUG
bool "USB Philips Cameras verbose debug"
- depends USB_PWC
+ depends on USB_PWC
help
Say Y here in order to have the pwc driver generate verbose debugging
messages.
.poll = pwc_video_poll,
.mmap = pwc_video_mmap,
.ioctl = pwc_video_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
static struct video_device pwc_template = {
struct v4l2_format *f = arg;
return saa7134_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
/* 70-79 */
/* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
+/* '+ 4' turns on the Low Noise Amplifier */
static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
- { 16 * 130.00 /*MHz*/, 0xce, 0x01, },
- { 16 * 364.50 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
+ { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, },
+ { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, },
+ { 16 * 999.99 , 0xce, 0x08 + 4, },
};
static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
/* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */
+/* '+ 4' turns on the Low Noise Amplifier */
static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = {
- { 16 * 146.25 /*MHz*/, 0xce, 0x01, },
- { 16 * 428.50 /*MHz*/, 0xce, 0x02, },
- { 16 * 999.99 , 0xce, 0x08, },
+ { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, },
+ { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, },
+ { 16 * 999.99 , 0xce, 0x08 + 4, },
};
static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {
dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err);
break;
}
+
+ pict->depth = ((fmt2->fmt.pix.bytesperline<<3)
+ + (fmt2->fmt.pix.width-1) )
+ /fmt2->fmt.pix.width;
pict->palette = pixelformat_to_palette(
fmt2->fmt.pix.pixelformat);
break;
/* ------------------------------------------------------------------ */
/* debug help functions */
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static const char *v4l1_ioctls[] = {
[_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP",
[_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN",
#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
[_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES",
[_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS",
[_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM",
(_IOC_NR(cmd) < V4L2_INT_IOCTLS) ?
v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd);
break;
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case 'v':
printk("v4l1 ioctl %s, dir=%s (0x%08x)\n",
(_IOC_NR(cmd) < V4L1_IOCTLS) ?
ret=vfd->vidioc_overlay(file, fh, *i);
break;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
file->f_flags & O_NONBLOCK));
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
struct vivi_fh *fh=priv;
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
.tvnorms = tvnorms,
spin_lock_irq(q->queue_lock);
set_current_state(TASK_INTERRUPTIBLE);
if (!blk_queue_plugged(q))
- mq->req = req = elv_next_request(q);
+ req = elv_next_request(q);
+ mq->req = req;
spin_unlock_irq(q->queue_lock);
if (!req) {
#include "wbsd.h"
#define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.5"
+#define DRIVER_VERSION "1.6"
#define DBG(x...) \
pr_debug(DRIVER_NAME ": " x)
static int __devinit wbsd_request_region(struct wbsd_host *host, int base)
{
- if (io & 0x7)
+ if (base & 0x7)
return -EINVAL;
if (!request_region(base, 8, DRIVER_NAME))
return -EIO;
- host->base = io;
+ host->base = base;
return 0;
}
/*
* Request resources.
*/
- ret = wbsd_request_resources(host, io, irq, dma);
+ ret = wbsd_request_resources(host, base, irq, dma);
if (ret) {
wbsd_release_resources(host);
wbsd_free_mmc(dev);
static int __devinit wbsd_probe(struct platform_device *dev)
{
+ /* Use the module parameters for resources */
return wbsd_init(&dev->dev, io, irq, dma, 0);
}
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.4.43"
-#define DRV_MODULE_RELDATE "June 28, 2006"
+#define DRV_MODULE_VERSION "1.4.44"
+#define DRV_MODULE_RELDATE "August 10, 2006"
#define RUN_AT(x) (jiffies + (x))
static inline u32 bnx2_tx_avail(struct bnx2 *bp)
{
- u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
+ u32 diff;
+ smp_mb();
+ diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
if (diff > MAX_TX_DESC_CNT)
diff = (diff & MAX_TX_DESC_CNT) - 1;
return (bp->tx_ring_size - diff);
struct rx_bd *rxbd = &bp->rx_desc_ring[RX_RING(index)][RX_IDX(index)];
unsigned long align;
- skb = dev_alloc_skb(bp->rx_buf_size);
+ skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size);
if (skb == NULL) {
return -ENOMEM;
}
skb_reserve(skb, 8 - align);
}
- skb->dev = bp->dev;
mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
PCI_DMA_FROMDEVICE);
}
bp->tx_cons = sw_cons;
+ /* Need to make the tx_cons update visible to bnx2_start_xmit()
+ * before checking for netif_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that bnx2_start_xmit()
+ * will miss it and cause the queue to be stopped forever.
+ */
+ smp_mb();
- if (unlikely(netif_queue_stopped(bp->dev))) {
- spin_lock(&bp->tx_lock);
+ if (unlikely(netif_queue_stopped(bp->dev)) &&
+ (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) {
+ netif_tx_lock(bp->dev);
if ((netif_queue_stopped(bp->dev)) &&
- (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) {
-
+ (bnx2_tx_avail(bp) > bp->tx_wake_thresh))
netif_wake_queue(bp->dev);
- }
- spin_unlock(&bp->tx_lock);
+ netif_tx_unlock(bp->dev);
}
}
if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) {
struct sk_buff *new_skb;
- new_skb = dev_alloc_skb(len + 2);
+ new_skb = netdev_alloc_skb(bp->dev, len + 2);
if (new_skb == NULL)
goto reuse_rx;
skb_reserve(new_skb, 2);
skb_put(new_skb, len);
- new_skb->dev = bp->dev;
bnx2_reuse_rx_skb(bp, skb,
sw_ring_cons, sw_ring_prod);
struct tx_bd *txbd;
u32 val;
+ bp->tx_wake_thresh = bp->tx_ring_size / 2;
+
txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT];
txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32;
return -EINVAL;
pkt_size = 1514;
- skb = dev_alloc_skb(pkt_size);
+ skb = netdev_alloc_skb(bp->dev, pkt_size);
if (!skb)
return -ENOMEM;
packet = skb_put(skb, pkt_size);
#endif
/* Called with netif_tx_lock.
- * hard_start_xmit is pseudo-lockless - a lock is only required when
- * the tx queue is full. This way, we get the benefit of lockless
- * operations most of the time without the complexities to handle
- * netif_stop_queue/wake_queue race conditions.
+ * bnx2_tx_int() runs without netif_tx_lock unless it needs to call
+ * netif_wake_queue().
*/
static int
bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
dev->trans_start = jiffies;
if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) {
- spin_lock(&bp->tx_lock);
netif_stop_queue(dev);
-
- if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)
+ if (bnx2_tx_avail(bp) > bp->tx_wake_thresh)
netif_wake_queue(dev);
- spin_unlock(&bp->tx_lock);
}
return NETDEV_TX_OK;
bp->pdev = pdev;
spin_lock_init(&bp->phy_lock);
- spin_lock_init(&bp->tx_lock);
INIT_WORK(&bp->reset_task, bnx2_reset_task, bp);
dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
bp->mac_addr[5] = (u8) reg;
bp->tx_ring_size = MAX_TX_DESC_CNT;
- bnx2_set_rx_ring_size(bp, 100);
+ bnx2_set_rx_ring_size(bp, 255);
bp->rx_csum = 1;
u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES)));
u16 tx_prod;
- struct tx_bd *tx_desc_ring;
- struct sw_bd *tx_buf_ring;
- int tx_ring_size;
-
u16 tx_cons __attribute__((aligned(L1_CACHE_BYTES)));
u16 hw_tx_cons;
struct sw_bd *rx_buf_ring;
struct rx_bd *rx_desc_ring[MAX_RX_RINGS];
- /* Only used to synchronize netif_stop_queue/wake_queue when tx */
- /* ring is full */
- spinlock_t tx_lock;
+ /* TX constants */
+ struct tx_bd *tx_desc_ring;
+ struct sw_bd *tx_buf_ring;
+ int tx_ring_size;
+ u32 tx_wake_thresh;
/* End of fields used in the performance code paths. */
}
myri10ge_reset(mgp);
- myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096);
+ myri10ge_dummy_rdma(mgp, 1);
/* Save configuration space to be restored if the
* nic resets due to a parity error */
void *ptr[CARDMAP_WIDTH];
};
static void *cardmap_get(struct cardmap *map, unsigned int nr);
-static void cardmap_set(struct cardmap **map, unsigned int nr, void *ptr);
+static int cardmap_set(struct cardmap **map, unsigned int nr, void *ptr);
static unsigned int cardmap_find_first_free(struct cardmap *map);
static void cardmap_destroy(struct cardmap **map);
{
struct channel *pch;
- pch = kmalloc(sizeof(struct channel), GFP_KERNEL);
+ pch = kzalloc(sizeof(struct channel), GFP_KERNEL);
if (pch == 0)
return -ENOMEM;
- memset(pch, 0, sizeof(struct channel));
pch->ppp = NULL;
pch->chan = chan;
chan->ppp = pch;
int ret = -ENOMEM;
int i;
- ppp = kmalloc(sizeof(struct ppp), GFP_KERNEL);
+ ppp = kzalloc(sizeof(struct ppp), GFP_KERNEL);
if (!ppp)
goto out;
dev = alloc_netdev(0, "", ppp_setup);
if (!dev)
goto out1;
- memset(ppp, 0, sizeof(struct ppp));
ppp->mru = PPP_MRU;
init_ppp_file(&ppp->file, INTERFACE);
}
atomic_inc(&ppp_unit_count);
- cardmap_set(&all_ppp_units, unit, ppp);
+ ret = cardmap_set(&all_ppp_units, unit, ppp);
+ if (ret != 0)
+ goto out3;
+
mutex_unlock(&all_ppp_mutex);
*retp = 0;
return ppp;
+out3:
+ atomic_dec(&ppp_unit_count);
out2:
mutex_unlock(&all_ppp_mutex);
free_netdev(dev);
return NULL;
}
-static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
+static int cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
{
struct cardmap *p;
int i;
if (p == NULL || (nr >> p->shift) >= CARDMAP_WIDTH) {
do {
/* need a new top level */
- struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL);
- memset(np, 0, sizeof(*np));
+ struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL);
+ if (!np)
+ goto enomem;
np->ptr[0] = p;
if (p != NULL) {
np->shift = p->shift + CARDMAP_ORDER;
while (p->shift > 0) {
i = (nr >> p->shift) & CARDMAP_MASK;
if (p->ptr[i] == NULL) {
- struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL);
- memset(np, 0, sizeof(*np));
+ struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL);
+ if (!np)
+ goto enomem;
np->shift = p->shift - CARDMAP_ORDER;
np->parent = p;
p->ptr[i] = np;
set_bit(i, &p->inuse);
else
clear_bit(i, &p->inuse);
+ return 0;
+ enomem:
+ return -ENOMEM;
}
static unsigned int cardmap_find_first_free(struct cardmap *map)
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.64"
-#define DRV_MODULE_RELDATE "July 31, 2006"
+#define DRV_MODULE_VERSION "3.65"
+#define DRV_MODULE_RELDATE "August 07, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
TG3_RX_RCB_RING_SIZE(tp))
#define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \
TG3_TX_RING_SIZE)
-#define TX_BUFFS_AVAIL(TP) \
- ((TP)->tx_pending - \
- (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1)))
#define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1))
#define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64)
spin_unlock(&tp->lock);
}
+static inline u32 tg3_tx_avail(struct tg3 *tp)
+{
+ smp_mb();
+ return (tp->tx_pending -
+ ((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1)));
+}
+
/* Tigon3 never reports partial packet sends. So we do not
* need special logic to handle SKBs that have not had all
* of their frags sent yet, like SunGEM does.
tp->tx_cons = sw_idx;
- if (unlikely(netif_queue_stopped(tp->dev))) {
- spin_lock(&tp->tx_lock);
+ /* Need to make the tx_cons update visible to tg3_start_xmit()
+ * before checking for netif_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that tg3_start_xmit()
+ * will miss it and cause the queue to be stopped forever.
+ */
+ smp_mb();
+
+ if (unlikely(netif_queue_stopped(tp->dev) &&
+ (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) {
+ netif_tx_lock(tp->dev);
if (netif_queue_stopped(tp->dev) &&
- (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH))
+ (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))
netif_wake_queue(tp->dev);
- spin_unlock(&tp->tx_lock);
+ netif_tx_unlock(tp->dev);
}
}
if (skb == NULL)
return -ENOMEM;
- skb->dev = tp->dev;
skb_reserve(skb, tp->rx_offset);
mapping = pci_map_single(tp->pdev, skb->data,
if (copy_skb == NULL)
goto drop_it_no_recycle;
- copy_skb->dev = tp->dev;
skb_reserve(copy_skb, 2);
skb_put(copy_skb, len);
pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
* interrupt. Furthermore, IRQ processing runs lockless so we have
* no IRQ context deadlocks to worry about either. Rejoice!
*/
- if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
if (!netif_queue_stopped(dev)) {
netif_stop_queue(dev);
tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
tp->tx_prod = entry;
- if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) {
- spin_lock(&tp->tx_lock);
+ if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
netif_stop_queue(dev);
- if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)
+ if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
netif_wake_queue(tp->dev);
- spin_unlock(&tp->tx_lock);
}
out_unlock:
struct sk_buff *segs, *nskb;
/* Estimate the number of fragments in the worst case */
- if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
+ if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
netif_stop_queue(tp->dev);
return NETDEV_TX_BUSY;
}
* interrupt. Furthermore, IRQ processing runs lockless so we have
* no IRQ context deadlocks to worry about either. Rejoice!
*/
- if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
if (!netif_queue_stopped(dev)) {
netif_stop_queue(dev);
tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
tp->tx_prod = entry;
- if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) {
- spin_lock(&tp->tx_lock);
+ if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
netif_stop_queue(dev);
- if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)
+ if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
netif_wake_queue(tp->dev);
- spin_unlock(&tp->tx_lock);
}
out_unlock:
tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA;
#endif
spin_lock_init(&tp->lock);
- spin_lock_init(&tp->tx_lock);
spin_lock_init(&tp->indirect_lock);
INIT_WORK(&tp->reset_task, tg3_reset_task, tp);
* lock: Held during reset, PHY access, timer, and when
* updating tg3_flags and tg3_flags2.
*
- * tx_lock: Held during tg3_start_xmit and tg3_tx only
- * when calling netif_[start|stop]_queue.
- * tg3_start_xmit is protected by netif_tx_lock.
+ * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds
+ * netif_tx_lock when it needs to call
+ * netif_wake_queue.
*
* Both of these locks are to be held with BH safety.
*
u32 tx_cons;
u32 tx_pending;
- spinlock_t tx_lock;
-
struct tg3_tx_buffer_desc *tx_ring;
struct tx_ring_info *tx_buffers;
dma_addr_t tx_desc_mapping;
When in doubt, say N.
-config HOTPLUG_PCI_SHPC_PHPRM_LEGACY
- bool "For AMD SHPC only: Use $HRT for resource/configuration"
- depends on HOTPLUG_PCI_SHPC && !ACPI
- help
- Say Y here for AMD SHPC. You have to select this option if you are
- using this driver on platform with AMD SHPC.
-
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include <linux/pci-acpi.h>
+
#define pciehp_get_hp_hw_control_from_firmware(dev) \
pciehp_acpi_get_hp_hw_control_from_firmware(dev)
static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
#include "../pci.h"
#include "pciehp.h"
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include <linux/pci-acpi.h>
#ifdef DEBUG
#define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */
#define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */
req = elv_next_request(device->request_queue);
if (req == NULL)
break;
- dasd_end_request(req, 0);
blkdev_dequeue_request(req);
+ dasd_end_request(req, 0);
}
spin_unlock_irq(&device->request_queue_lock);
}
};
/*
- * dasd_servermap is used to store the server_id of all storage servers
- * accessed by DASD device driver.
+ * dasd_server_ssid_map contains a globally unique storage server subsystem ID.
+ * dasd_server_ssid_list contains the list of all subsystem IDs accessed by
+ * the DASD device driver.
*/
-struct dasd_servermap {
+struct dasd_server_ssid_map {
struct list_head list;
struct server_id {
char vendor[4];
char serial[15];
} sid;
+ __u16 ssid;
};
-static struct list_head dasd_serverlist;
+static struct list_head dasd_server_ssid_list;
/*
* Parameter parsing functions for dasd= parameter. The syntax is:
module_param_array(dasd, charp, NULL, 0);
/*
- * Single spinlock to protect devmap structures and lists.
+ * Single spinlock to protect devmap and servermap structures and lists.
*/
static DEFINE_SPINLOCK(dasd_devmap_lock);
if (dasd_page_cache)
return residual_str;
dasd_page_cache =
- kmem_cache_create("dasd_page_cache", PAGE_SIZE, 0,
- SLAB_CACHE_DMA, NULL, NULL );
+ kmem_cache_create("dasd_page_cache", PAGE_SIZE,
+ PAGE_SIZE, SLAB_CACHE_DMA,
+ NULL, NULL );
if (!dasd_page_cache)
MESSAGE(KERN_WARNING, "%s", "Failed to create slab, "
"fixed buffer mode disabled.");
.attrs = dasd_attrs,
};
-/*
- * Check if the related storage server is already contained in the
- * dasd_serverlist. If server is not contained, create new entry.
- * Return 0 if server was already in serverlist,
- * 1 if the server was added successfully
- * <0 in case of error.
- */
-static int
-dasd_add_server(struct dasd_uid *uid)
-{
- struct dasd_servermap *new, *tmp;
-
- /* check if server is already contained */
- list_for_each_entry(tmp, &dasd_serverlist, list)
- // normale cmp?
- if (strncmp(tmp->sid.vendor, uid->vendor,
- sizeof(tmp->sid.vendor)) == 0
- && strncmp(tmp->sid.serial, uid->serial,
- sizeof(tmp->sid.serial)) == 0)
- return 0;
-
- new = (struct dasd_servermap *)
- kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL);
- if (!new)
- return -ENOMEM;
-
- strncpy(new->sid.vendor, uid->vendor, sizeof(new->sid.vendor));
- strncpy(new->sid.serial, uid->serial, sizeof(new->sid.serial));
- list_add(&new->list, &dasd_serverlist);
- return 1;
-}
-
-
/*
* Return copy of the device unique identifier.
*/
/*
* Register the given device unique identifier into devmap struct.
+ * In addition check if the related storage server subsystem ID is already
+ * contained in the dasd_server_ssid_list. If subsystem ID is not contained,
+ * create new entry.
* Return 0 if server was already in serverlist,
* 1 if the server was added successful
* <0 in case of error.
dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
{
struct dasd_devmap *devmap;
- int rc;
+ struct dasd_server_ssid_map *srv, *tmp;
devmap = dasd_find_busid(cdev->dev.bus_id);
if (IS_ERR(devmap))
return PTR_ERR(devmap);
+
+ /* generate entry for server_ssid_map */
+ srv = (struct dasd_server_ssid_map *)
+ kzalloc(sizeof(struct dasd_server_ssid_map), GFP_KERNEL);
+ if (!srv)
+ return -ENOMEM;
+ strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1);
+ strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1);
+ srv->ssid = uid->ssid;
+
+ /* server is already contained ? */
spin_lock(&dasd_devmap_lock);
devmap->uid = *uid;
- rc = dasd_add_server(uid);
+ list_for_each_entry(tmp, &dasd_server_ssid_list, list) {
+ if (!memcmp(&srv->sid, &tmp->sid,
+ sizeof(struct dasd_server_ssid_map))) {
+ kfree(srv);
+ srv = NULL;
+ break;
+ }
+ }
+
+ /* add servermap to serverlist */
+ if (srv)
+ list_add(&srv->list, &dasd_server_ssid_list);
spin_unlock(&dasd_devmap_lock);
- return rc;
+
+ return (srv ? 1 : 0);
}
EXPORT_SYMBOL_GPL(dasd_set_uid);
INIT_LIST_HEAD(&dasd_hashlists[i]);
/* Initialize servermap structure. */
- INIT_LIST_HEAD(&dasd_serverlist);
+ INIT_LIST_HEAD(&dasd_server_ssid_list);
return 0;
}
return -ENODEV;
memset(uid, 0, sizeof(struct dasd_uid));
- strncpy(uid->vendor, confdata->ned1.HDA_manufacturer,
- sizeof(uid->vendor) - 1);
+ memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+ sizeof(uid->vendor) - 1);
EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
- strncpy(uid->serial, confdata->ned1.HDA_location,
- sizeof(uid->serial) - 1);
+ memcpy(uid->serial, confdata->ned1.HDA_location,
+ sizeof(uid->serial) - 1);
EBCASC(uid->serial, sizeof(uid->serial) - 1);
uid->ssid = confdata->neq.subsystemID;
if (confdata->ned2.sneq.flags == 0x40) {
#define PRINT_ERR(x...) printk(KERN_ERR XPRAM_NAME " error:" x)
-static struct sysdev_class xpram_sysclass = {
- set_kset_name("xpram"),
-};
-
-static struct sys_device xpram_sys_device = {
- .id = 0,
- .cls = &xpram_sysclass,
-};
-
typedef struct {
unsigned int size; /* size of xpram segment in pages */
unsigned int offset; /* start page of xpram segment */
}
unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
blk_cleanup_queue(xpram_queue);
- sysdev_unregister(&xpram_sys_device);
- sysdev_class_unregister(&xpram_sysclass);
}
static int __init xpram_init(void)
rc = xpram_setup_sizes(xpram_pages);
if (rc)
return rc;
- rc = sysdev_class_register(&xpram_sysclass);
- if (rc)
- return rc;
-
- rc = sysdev_register(&xpram_sys_device);
- if (rc) {
- sysdev_class_unregister(&xpram_sysclass);
- return rc;
- }
- rc = xpram_setup_blkdev();
- if (rc)
- sysdev_unregister(&xpram_sys_device);
- return rc;
+ return xpram_setup_blkdev();
}
module_init(xpram_init);
device,
"%s", tcd->device_name
);
- rc = PTR_ERR(tcd->class_device);
+ rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0;
if (rc)
goto fail_with_cdev;
rc = sysfs_create_link(
stsch(sch->schid, &sch->schib);
if (sch->schib.scsw.actl != 0 ||
+ (sch->schib.scsw.stctl & SCSW_STCTL_STATUS_PEND) ||
(cdev->private->irb.scsw.stctl & SCSW_STCTL_STATUS_PEND)) {
/*
* No final status yet or final status not yet delivered
/* Abuse intparm for error reporting. */
if (IS_ERR(irb))
cdev->private->intparm = -EIO;
+ else if (irb->scsw.cc == 1)
+ /* Retry for deferred condition code. */
+ cdev->private->intparm = -EAGAIN;
else if ((irb->scsw.dstat !=
(DEV_STAT_CHN_END|DEV_STAT_DEV_END)) ||
(irb->scsw.cstat != 0)) {
config SCSI_CUMANA_1
tristate "CumanaSCSI I support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the Cumana SCSI I card. If you have an
Acorn system with one of these, say Y. If unsure, say N.
config SCSI_ECOSCSI
tristate "EcoScsi support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the EcoSCSI card -- a small card that sits
in the Econet socket. If you have an Acorn system with one of these,
config SCSI_OAK1
tristate "Oak SCSI support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the Oak SCSI card. If you have an Acorn
system with one of these, say Y. If unsure, say N.
unsigned long len = 0;
int buf;
- SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer;
+ SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
SCpnt->SCp.ptr = (char *)
(page_address(SCpnt->SCp.buffer->page) +
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
-#endif
}
static void au1xxx_stop_ohc(struct platform_device *dev)
if (dev) {
usb_kill_urb(dev->urb);
input_unregister_device(dev->input);
- usb_free_urb(dev->urb);
usb_buffer_free(dev->udev, dev->datalen,
dev->data, dev->urb->transfer_dma);
+ usb_free_urb(dev->urb);
kfree(dev);
}
printk(KERN_INFO "input: appletouch disconnected\n");
static int ctrl_out (struct usbtest_dev *dev,
unsigned count, unsigned length, unsigned vary)
{
- unsigned i, j, len, retval;
+ unsigned i, j, len;
+ int retval;
u8 *buf;
char *what = "?";
struct usb_device *udev;
-
+
if (length < 1 || length > 0xffff || vary >= length)
return -EINVAL;
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+/* www.canusb.com Lawicel CANUSB device */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
#define FTDI_ACTZWAVE_PID 0xF2D0
{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
+ { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
+ { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
+ "C-MEX",
+ "A-VOX",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && EFI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
#include <linux/screen_info.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
#include <asm/io.h>
M_I20,
M_MINI,
M_MACBOOK,
- M_NEW
+ M_UNKNOWN
} MAC_TYPE;
/* --------------------------------------------------------------------- */
};
static int inverse;
-static int model = M_NEW;
+static int model = M_UNKNOWN;
static int manual_height;
static int manual_width;
+static int set_system(struct dmi_system_id *id)
+{
+ printk(KERN_INFO "imacfb: %s detected - set system to %ld\n",
+ id->ident, (long)id->driver_data);
+
+ model = (long)id->driver_data;
+
+ return 0;
+}
+
+static struct dmi_system_id __initdata dmi_system_table[] = {
+ { set_system, "iMac4,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17},
+ { set_system, "MacBookPro1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17},
+ { set_system, "MacBook1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK},
+ { set_system, "Macmini1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"Macmini1,1")}, (void *)M_MINI},
+ {},
+};
+
#define DEFAULT_FB_MEM 1024*1024*16
/* --------------------------------------------------------------------- */
screen_info.lfb_linelength = 1472 * 4;
screen_info.lfb_base = 0x80010000;
break;
- case M_NEW:
case M_I20:
screen_info.lfb_width = 1680;
screen_info.lfb_height = 1050;
size_remap = size_total;
imacfb_fix.smem_len = size_remap;
+#ifndef __i386__
+ screen_info.imacpm_seg = 0;
+#endif
+
if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) {
printk(KERN_WARNING
"imacfb: cannot reserve video memory at 0x%lx\n",
int ret;
char *option = NULL;
- /* ignore error return of fb_get_options */
- fb_get_options("imacfb", &option);
+ if (!efi_enabled)
+ return -ENODEV;
+ if (!dmi_check_system(dmi_system_table))
+ return -ENODEV;
+ if (model == M_UNKNOWN)
+ return -ENODEV;
+
+ if (fb_get_options("imacfb", &option))
+ return -ENODEV;
+
imacfb_setup(option);
ret = platform_driver_register(&imacfb_driver);
if (adfs_checkmap(sb, dm))
return dm;
- adfs_error(sb, NULL, "map corrupted");
+ adfs_error(sb, "map corrupted");
error_free:
while (--zone >= 0)
struct fuse_readpages_data data;
int err;
+ err = -EIO;
if (is_bad_inode(inode))
- return -EIO;
+ goto clean_pages_up;
data.file = file;
data.inode = inode;
data.req = fuse_get_req(fc);
+ err = PTR_ERR(data.req);
if (IS_ERR(data.req))
- return PTR_ERR(data.req);
+ goto clean_pages_up;
err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
if (!err) {
fuse_put_request(fc, data.req);
}
return err;
+
+clean_pages_up:
+ put_pages_list(pages);
+ return err;
}
static size_t fuse_send_write(struct fuse_req *req, struct file *file,
set_cflag(COMMIT_Dirty, inode);
}
-static int
-jfs_get_blocks(struct inode *ip, sector_t lblock, unsigned long max_blocks,
- struct buffer_head *bh_result, int create)
+int jfs_get_block(struct inode *ip, sector_t lblock,
+ struct buffer_head *bh_result, int create)
{
s64 lblock64 = lblock;
int rc = 0;
xad_t xad;
s64 xaddr;
int xflag;
- s32 xlen = max_blocks;
+ s32 xlen = bh_result->b_size >> ip->i_blkbits;
/*
* Take appropriate lock on inode
IREAD_LOCK(ip);
if (((lblock64 << ip->i_sb->s_blocksize_bits) < ip->i_size) &&
- (!xtLookup(ip, lblock64, max_blocks, &xflag, &xaddr, &xlen, 0)) &&
+ (!xtLookup(ip, lblock64, xlen, &xflag, &xaddr, &xlen, 0)) &&
xaddr) {
if (xflag & XAD_NOTRECORDED) {
if (!create)
return rc;
}
-static int jfs_get_block(struct inode *ip, sector_t lblock,
- struct buffer_head *bh_result, int create)
-{
- return jfs_get_blocks(ip, lblock, bh_result->b_size >> ip->i_blkbits,
- bh_result, create);
-}
-
static int jfs_writepage(struct page *page, struct writeback_control *wbc)
{
return nobh_writepage(page, jfs_get_block, wbc);
extern void jfs_free_zero_link(struct inode *);
extern struct dentry *jfs_get_parent(struct dentry *dentry);
extern void jfs_set_inode_flags(struct inode *);
+extern int jfs_get_block(struct inode *, sector_t, struct buffer_head *, int);
extern const struct address_space_operations jfs_aops;
extern struct inode_operations jfs_dir_inode_operations;
#include <linux/moduleparam.h>
#include <linux/kthread.h>
#include <linux/posix_acl.h>
+#include <linux/buffer_head.h>
#include <asm/uaccess.h>
#include <linux/seq_file.h>
break;
}
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
case Opt_quota:
case Opt_usrquota:
*flag |= JFS_USRQUOTA;
if (sbi->flag & JFS_NOINTEGRITY)
seq_puts(seq, ",nointegrity");
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
if (sbi->flag & JFS_USRQUOTA)
seq_puts(seq, ",usrquota");
return 0;
}
+#ifdef CONFIG_QUOTA
+
+/* Read data from quotafile - avoid pagecache and such because we cannot afford
+ * acquiring the locks... As quota files are never truncated and quota code
+ * itself serializes the operations (and noone else should touch the files)
+ * we don't have to be afraid of races */
+static ssize_t jfs_quota_read(struct super_block *sb, int type, char *data,
+ size_t len, loff_t off)
+{
+ struct inode *inode = sb_dqopt(sb)->files[type];
+ sector_t blk = off >> sb->s_blocksize_bits;
+ int err = 0;
+ int offset = off & (sb->s_blocksize - 1);
+ int tocopy;
+ size_t toread;
+ struct buffer_head tmp_bh;
+ struct buffer_head *bh;
+ loff_t i_size = i_size_read(inode);
+
+ if (off > i_size)
+ return 0;
+ if (off+len > i_size)
+ len = i_size-off;
+ toread = len;
+ while (toread > 0) {
+ tocopy = sb->s_blocksize - offset < toread ?
+ sb->s_blocksize - offset : toread;
+
+ tmp_bh.b_state = 0;
+ tmp_bh.b_size = 1 << inode->i_blkbits;
+ err = jfs_get_block(inode, blk, &tmp_bh, 0);
+ if (err)
+ return err;
+ if (!buffer_mapped(&tmp_bh)) /* A hole? */
+ memset(data, 0, tocopy);
+ else {
+ bh = sb_bread(sb, tmp_bh.b_blocknr);
+ if (!bh)
+ return -EIO;
+ memcpy(data, bh->b_data+offset, tocopy);
+ brelse(bh);
+ }
+ offset = 0;
+ toread -= tocopy;
+ data += tocopy;
+ blk++;
+ }
+ return len;
+}
+
+/* Write to quotafile */
+static ssize_t jfs_quota_write(struct super_block *sb, int type,
+ const char *data, size_t len, loff_t off)
+{
+ struct inode *inode = sb_dqopt(sb)->files[type];
+ sector_t blk = off >> sb->s_blocksize_bits;
+ int err = 0;
+ int offset = off & (sb->s_blocksize - 1);
+ int tocopy;
+ size_t towrite = len;
+ struct buffer_head tmp_bh;
+ struct buffer_head *bh;
+
+ mutex_lock(&inode->i_mutex);
+ while (towrite > 0) {
+ tocopy = sb->s_blocksize - offset < towrite ?
+ sb->s_blocksize - offset : towrite;
+
+ tmp_bh.b_state = 0;
+ tmp_bh.b_size = 1 << inode->i_blkbits;
+ err = jfs_get_block(inode, blk, &tmp_bh, 1);
+ if (err)
+ goto out;
+ if (offset || tocopy != sb->s_blocksize)
+ bh = sb_bread(sb, tmp_bh.b_blocknr);
+ else
+ bh = sb_getblk(sb, tmp_bh.b_blocknr);
+ if (!bh) {
+ err = -EIO;
+ goto out;
+ }
+ lock_buffer(bh);
+ memcpy(bh->b_data+offset, data, tocopy);
+ flush_dcache_page(bh->b_page);
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ unlock_buffer(bh);
+ brelse(bh);
+ offset = 0;
+ towrite -= tocopy;
+ data += tocopy;
+ blk++;
+ }
+out:
+ if (len == towrite)
+ return err;
+ if (inode->i_size < off+len-towrite)
+ i_size_write(inode, off+len-towrite);
+ inode->i_version++;
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ mark_inode_dirty(inode);
+ mutex_unlock(&inode->i_mutex);
+ return len - towrite;
+}
+
+#endif
+
static struct super_operations jfs_super_operations = {
.alloc_inode = jfs_alloc_inode,
.destroy_inode = jfs_destroy_inode,
.unlockfs = jfs_unlockfs,
.statfs = jfs_statfs,
.remount_fs = jfs_remount,
- .show_options = jfs_show_options
+ .show_options = jfs_show_options,
+#ifdef CONFIG_QUOTA
+ .quota_read = jfs_quota_read,
+ .quota_write = jfs_quota_write,
+#endif
};
static struct export_operations jfs_export_operations = {
if (!leases_enable)
goto out;
- error = lease_alloc(filp, arg, &fl);
- if (error)
+ error = -ENOMEM;
+ fl = locks_alloc_lock();
+ if (fl == NULL)
goto out;
locks_copy_lock(fl, lease);
locks_insert_lock(before, fl);
*flp = fl;
+ error = 0;
out:
return error;
}
mlog(0, "returning %d\n", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(dlm_migrate_lockres);
int dlm_lock_basts_flushed(struct dlm_ctxt *dlm, struct dlm_lock *lock)
{
else
status = dlm_get_unlock_actions(dlm, res, lock, lksb, &actions);
- if (status != DLM_NORMAL)
+ if (status != DLM_NORMAL && (status != DLM_CANCELGRANT || !master_node))
goto leave;
/* By now this has been masked out of cancel requests. */
spin_lock(&lock->spinlock);
/* if the master told us the lock was already granted,
* let the ast handle all of these actions */
- if (status == DLM_NORMAL &&
- lksb->status == DLM_CANCELGRANT) {
+ if (status == DLM_CANCELGRANT) {
actions &= ~(DLM_UNLOCK_REMOVE_LOCK|
DLM_UNLOCK_REGRANT_LOCK|
DLM_UNLOCK_CLEAR_CONVERT_TYPE);
vec, veclen, owner, &status);
if (tmpret >= 0) {
// successfully sent and received
- if (status == DLM_CANCELGRANT)
- ret = DLM_NORMAL;
- else if (status == DLM_FORWARD) {
+ if (status == DLM_FORWARD)
mlog(0, "master was in-progress. retry\n");
- ret = DLM_FORWARD;
- } else
- ret = status;
- lksb->status = status;
+ ret = status;
} else {
mlog_errno(tmpret);
if (dlm_is_host_down(tmpret)) {
/* something bad. this will BUG in ocfs2 */
ret = dlm_err_to_dlm_status(tmpret);
}
- lksb->status = ret;
}
return ret;
/* lock was found on queue */
lksb = lock->lksb;
+ if (flags & (LKM_VALBLK|LKM_PUT_LVB) &&
+ lock->ml.type != LKM_EXMODE)
+ flags &= ~(LKM_VALBLK|LKM_PUT_LVB);
+
/* unlockast only called on originating node */
if (flags & LKM_PUT_LVB) {
lksb->flags |= DLM_LKSB_PUT_LVB;
"cookie=%u:%llu\n",
dlm_get_lock_cookie_node(unlock->cookie),
dlm_get_lock_cookie_seq(unlock->cookie));
- else {
- /* send the lksb->status back to the other node */
- status = lksb->status;
+ else
dlm_lock_put(lock);
- }
leave:
if (res)
if (dlm_lock_on_list(&res->blocked, lock)) {
/* cancel this outright */
- lksb->status = DLM_NORMAL;
status = DLM_NORMAL;
*actions = (DLM_UNLOCK_CALL_AST |
DLM_UNLOCK_REMOVE_LOCK);
} else if (dlm_lock_on_list(&res->converting, lock)) {
/* cancel the request, put back on granted */
- lksb->status = DLM_NORMAL;
status = DLM_NORMAL;
*actions = (DLM_UNLOCK_CALL_AST |
DLM_UNLOCK_REMOVE_LOCK |
DLM_UNLOCK_REGRANT_LOCK |
DLM_UNLOCK_CLEAR_CONVERT_TYPE);
} else if (dlm_lock_on_list(&res->granted, lock)) {
- /* too late, already granted. DLM_CANCELGRANT */
- lksb->status = DLM_CANCELGRANT;
- status = DLM_NORMAL;
+ /* too late, already granted. */
+ status = DLM_CANCELGRANT;
*actions = DLM_UNLOCK_CALL_AST;
} else {
mlog(ML_ERROR, "lock to cancel is not on any list!\n");
- lksb->status = DLM_IVLOCKID;
status = DLM_IVLOCKID;
*actions = 0;
}
/* unlock request */
if (!dlm_lock_on_list(&res->granted, lock)) {
- lksb->status = DLM_DENIED;
status = DLM_DENIED;
dlm_error(status);
*actions = 0;
} else {
/* unlock granted lock */
- lksb->status = DLM_NORMAL;
status = DLM_NORMAL;
*actions = (DLM_UNLOCK_FREE_LOCK |
DLM_UNLOCK_CALL_AST |
spin_lock(&res->spinlock);
is_master = (res->owner == dlm->node_num);
+ if (flags & LKM_VALBLK && lock->ml.type != LKM_EXMODE)
+ flags &= ~LKM_VALBLK;
spin_unlock(&res->spinlock);
if (is_master) {
}
if (call_ast) {
- mlog(0, "calling unlockast(%p, %d)\n", data, lksb->status);
+ mlog(0, "calling unlockast(%p, %d)\n", data, status);
if (is_master) {
/* it is possible that there is one last bast
* pending. make sure it is flushed, then
wait_event(dlm->ast_wq,
dlm_lock_basts_flushed(dlm, lock));
}
- (*unlockast)(data, lksb->status);
+ (*unlockast)(data, status);
}
+ if (status == DLM_CANCELGRANT)
+ status = DLM_NORMAL;
+
if (status == DLM_NORMAL) {
mlog(0, "kicking the thread\n");
dlm_kick_thread(dlm, res);
mlog(0, "Allocating %u clusters for a new window.\n",
ocfs2_local_alloc_window_bits(osb));
+
+ /* Instruct the allocation code to try the most recently used
+ * cluster group. We'll re-record the group used this pass
+ * below. */
+ ac->ac_last_group = osb->la_last_gd;
+
/* we used the generic suballoc reserve function, but we set
* everything up nicely, so there's no reason why we can't use
* the more specific cluster api to claim bits. */
goto bail;
}
+ osb->la_last_gd = ac->ac_last_group;
+
la->la_bm_off = cpu_to_le32(cluster_off);
alloc->id1.bitmap1.i_total = cpu_to_le32(cluster_count);
/* just in case... In the future when we find space ourselves,
struct ocfs2_node_map recovery_map;
struct ocfs2_node_map umount_map;
- u32 num_clusters;
u64 root_blkno;
u64 system_dir_blkno;
u64 bitmap_blkno;
enum ocfs2_local_alloc_state local_alloc_state;
struct buffer_head *local_alloc_bh;
+ u64 la_last_gd;
/* Next two fields are for local node slot recovery during
* mount. */
struct buffer_head *group_bh,
u32 bits_wanted, u32 min_bits,
u16 *bit_off, u16 *bits_found);
-static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
- u32 bits_wanted,
- u32 min_bits,
- u16 *bit_off,
- unsigned int *num_bits,
- u64 *bg_blkno);
static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
struct ocfs2_alloc_context *ac,
u32 bits_wanted,
u64 *bg_blkno);
static int ocfs2_test_bg_bit_allocatable(struct buffer_head *bg_bh,
int nr);
-static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
- struct buffer_head *bg_bh,
- unsigned int bits_wanted,
- u16 *bit_off,
- u16 *bits_found);
static inline int ocfs2_block_group_set_bits(struct ocfs2_journal_handle *handle,
struct inode *alloc_inode,
struct ocfs2_group_desc *bg,
return (u32)le16_to_cpu(cl->cl_cpg) * (u32)le16_to_cpu(cl->cl_bpc);
}
+/* somewhat more expensive than our other checks, so use sparingly. */
+static int ocfs2_check_group_descriptor(struct super_block *sb,
+ struct ocfs2_dinode *di,
+ struct ocfs2_group_desc *gd)
+{
+ unsigned int max_bits;
+
+ if (!OCFS2_IS_VALID_GROUP_DESC(gd)) {
+ OCFS2_RO_ON_INVALID_GROUP_DESC(sb, gd);
+ return -EIO;
+ }
+
+ if (di->i_blkno != gd->bg_parent_dinode) {
+ ocfs2_error(sb, "Group descriptor # %llu has bad parent "
+ "pointer (%llu, expected %llu)",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ (unsigned long long)le64_to_cpu(gd->bg_parent_dinode),
+ (unsigned long long)le64_to_cpu(di->i_blkno));
+ return -EIO;
+ }
+
+ max_bits = le16_to_cpu(di->id2.i_chain.cl_cpg) * le16_to_cpu(di->id2.i_chain.cl_bpc);
+ if (le16_to_cpu(gd->bg_bits) > max_bits) {
+ ocfs2_error(sb, "Group descriptor # %llu has bit count of %u",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ le16_to_cpu(gd->bg_bits));
+ return -EIO;
+ }
+
+ if (le16_to_cpu(gd->bg_chain) >=
+ le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) {
+ ocfs2_error(sb, "Group descriptor # %llu has bad chain %u",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ le16_to_cpu(gd->bg_chain));
+ return -EIO;
+ }
+
+ if (le16_to_cpu(gd->bg_free_bits_count) > le16_to_cpu(gd->bg_bits)) {
+ ocfs2_error(sb, "Group descriptor # %llu has bit count %u but "
+ "claims that %u are free",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ le16_to_cpu(gd->bg_bits),
+ le16_to_cpu(gd->bg_free_bits_count));
+ return -EIO;
+ }
+
+ if (le16_to_cpu(gd->bg_bits) > (8 * le16_to_cpu(gd->bg_size))) {
+ ocfs2_error(sb, "Group descriptor # %llu has bit count %u but "
+ "max bitmap bits of %u",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ le16_to_cpu(gd->bg_bits),
+ 8 * le16_to_cpu(gd->bg_size));
+ return -EIO;
+ }
+
+ return 0;
+}
+
static int ocfs2_block_group_fill(struct ocfs2_journal_handle *handle,
struct inode *alloc_inode,
struct buffer_head *bg_bh,
static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
struct buffer_head *bg_bh,
unsigned int bits_wanted,
+ unsigned int total_bits,
u16 *bit_off,
u16 *bits_found)
{
found = start = best_offset = best_size = 0;
bitmap = bg->bg_bitmap;
- while((offset = ocfs2_find_next_zero_bit(bitmap,
- le16_to_cpu(bg->bg_bits),
- start)) != -1) {
- if (offset == le16_to_cpu(bg->bg_bits))
+ while((offset = ocfs2_find_next_zero_bit(bitmap, total_bits, start)) != -1) {
+ if (offset == total_bits)
break;
if (!ocfs2_test_bg_bit_allocatable(bg_bh, offset)) {
{
int search = -ENOSPC;
int ret;
- struct ocfs2_group_desc *bg = (struct ocfs2_group_desc *) group_bh->b_data;
+ struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *) group_bh->b_data;
u16 tmp_off, tmp_found;
+ unsigned int max_bits, gd_cluster_off;
BUG_ON(!ocfs2_is_cluster_bitmap(inode));
- if (bg->bg_free_bits_count) {
+ if (gd->bg_free_bits_count) {
+ max_bits = le16_to_cpu(gd->bg_bits);
+
+ /* Tail groups in cluster bitmaps which aren't cpg
+ * aligned are prone to partial extention by a failed
+ * fs resize. If the file system resize never got to
+ * update the dinode cluster count, then we don't want
+ * to trust any clusters past it, regardless of what
+ * the group descriptor says. */
+ gd_cluster_off = ocfs2_blocks_to_clusters(inode->i_sb,
+ le64_to_cpu(gd->bg_blkno));
+ if ((gd_cluster_off + max_bits) >
+ OCFS2_I(inode)->ip_clusters) {
+ max_bits = OCFS2_I(inode)->ip_clusters - gd_cluster_off;
+ mlog(0, "Desc %llu, bg_bits %u, clusters %u, use %u\n",
+ (unsigned long long)le64_to_cpu(gd->bg_blkno),
+ le16_to_cpu(gd->bg_bits),
+ OCFS2_I(inode)->ip_clusters, max_bits);
+ }
+
ret = ocfs2_block_group_find_clear_bits(OCFS2_SB(inode->i_sb),
group_bh, bits_wanted,
+ max_bits,
&tmp_off, &tmp_found);
if (ret)
return ret;
if (bg->bg_free_bits_count)
ret = ocfs2_block_group_find_clear_bits(OCFS2_SB(inode->i_sb),
group_bh, bits_wanted,
+ le16_to_cpu(bg->bg_bits),
bit_off, bits_found);
return ret;
}
+static int ocfs2_alloc_dinode_update_counts(struct inode *inode,
+ struct ocfs2_journal_handle *handle,
+ struct buffer_head *di_bh,
+ u32 num_bits,
+ u16 chain)
+{
+ int ret;
+ u32 tmp_used;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data;
+ struct ocfs2_chain_list *cl = (struct ocfs2_chain_list *) &di->id2.i_chain;
+
+ ret = ocfs2_journal_access(handle, inode, di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret < 0) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ tmp_used = le32_to_cpu(di->id1.bitmap1.i_used);
+ di->id1.bitmap1.i_used = cpu_to_le32(num_bits + tmp_used);
+ le32_add_cpu(&cl->cl_recs[chain].c_free, -num_bits);
+
+ ret = ocfs2_journal_dirty(handle, di_bh);
+ if (ret < 0)
+ mlog_errno(ret);
+
+out:
+ return ret;
+}
+
+static int ocfs2_search_one_group(struct ocfs2_alloc_context *ac,
+ u32 bits_wanted,
+ u32 min_bits,
+ u16 *bit_off,
+ unsigned int *num_bits,
+ u64 gd_blkno,
+ u16 *bits_left)
+{
+ int ret;
+ u16 found;
+ struct buffer_head *group_bh = NULL;
+ struct ocfs2_group_desc *gd;
+ struct inode *alloc_inode = ac->ac_inode;
+ struct ocfs2_journal_handle *handle = ac->ac_handle;
+
+ ret = ocfs2_read_block(OCFS2_SB(alloc_inode->i_sb), gd_blkno,
+ &group_bh, OCFS2_BH_CACHED, alloc_inode);
+ if (ret < 0) {
+ mlog_errno(ret);
+ return ret;
+ }
+
+ gd = (struct ocfs2_group_desc *) group_bh->b_data;
+ if (!OCFS2_IS_VALID_GROUP_DESC(gd)) {
+ OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, gd);
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = ac->ac_group_search(alloc_inode, group_bh, bits_wanted, min_bits,
+ bit_off, &found);
+ if (ret < 0) {
+ if (ret != -ENOSPC)
+ mlog_errno(ret);
+ goto out;
+ }
+
+ *num_bits = found;
+
+ ret = ocfs2_alloc_dinode_update_counts(alloc_inode, handle, ac->ac_bh,
+ *num_bits,
+ le16_to_cpu(gd->bg_chain));
+ if (ret < 0) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_block_group_set_bits(handle, alloc_inode, gd, group_bh,
+ *bit_off, *num_bits);
+ if (ret < 0)
+ mlog_errno(ret);
+
+ *bits_left = le16_to_cpu(gd->bg_free_bits_count);
+
+out:
+ brelse(group_bh);
+
+ return ret;
+}
+
static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
u32 bits_wanted,
u32 min_bits,
u16 *bit_off,
unsigned int *num_bits,
- u64 *bg_blkno)
+ u64 *bg_blkno,
+ u16 *bits_left)
{
int status;
u16 chain, tmp_bits;
goto bail;
}
bg = (struct ocfs2_group_desc *) group_bh->b_data;
- if (!OCFS2_IS_VALID_GROUP_DESC(bg)) {
- OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, bg);
- status = -EIO;
+ status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, bg);
+ if (status) {
+ mlog_errno(status);
goto bail;
}
goto bail;
}
bg = (struct ocfs2_group_desc *) group_bh->b_data;
- if (!OCFS2_IS_VALID_GROUP_DESC(bg)) {
- OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, bg);
- status = -EIO;
+ status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, bg);
+ if (status) {
+ mlog_errno(status);
goto bail;
}
}
(unsigned long long)fe->i_blkno);
*bg_blkno = le64_to_cpu(bg->bg_blkno);
+ *bits_left = le16_to_cpu(bg->bg_free_bits_count);
bail:
if (group_bh)
brelse(group_bh);
{
int status;
u16 victim, i;
+ u16 bits_left = 0;
+ u64 hint_blkno = ac->ac_last_group;
struct ocfs2_chain_list *cl;
struct ocfs2_dinode *fe;
goto bail;
}
+ if (hint_blkno) {
+ /* Attempt to short-circuit the usual search mechanism
+ * by jumping straight to the most recently used
+ * allocation group. This helps us mantain some
+ * contiguousness across allocations. */
+ status = ocfs2_search_one_group(ac, bits_wanted, min_bits,
+ bit_off, num_bits,
+ hint_blkno, &bits_left);
+ if (!status) {
+ /* Be careful to update *bg_blkno here as the
+ * caller is expecting it to be filled in, and
+ * ocfs2_search_one_group() won't do that for
+ * us. */
+ *bg_blkno = hint_blkno;
+ goto set_hint;
+ }
+ if (status < 0 && status != -ENOSPC) {
+ mlog_errno(status);
+ goto bail;
+ }
+ }
+
cl = (struct ocfs2_chain_list *) &fe->id2.i_chain;
victim = ocfs2_find_victim_chain(cl);
ac->ac_allow_chain_relink = 1;
status = ocfs2_search_chain(ac, bits_wanted, min_bits, bit_off,
- num_bits, bg_blkno);
+ num_bits, bg_blkno, &bits_left);
if (!status)
- goto bail;
+ goto set_hint;
if (status < 0 && status != -ENOSPC) {
mlog_errno(status);
goto bail;
ac->ac_chain = i;
status = ocfs2_search_chain(ac, bits_wanted, min_bits,
- bit_off, num_bits,
- bg_blkno);
+ bit_off, num_bits, bg_blkno,
+ &bits_left);
if (!status)
break;
if (status < 0 && status != -ENOSPC) {
goto bail;
}
}
-bail:
+set_hint:
+ if (status != -ENOSPC) {
+ /* If the next search of this group is not likely to
+ * yield a suitable extent, then we reset the last
+ * group hint so as to not waste a disk read */
+ if (bits_left < min_bits)
+ ac->ac_last_group = 0;
+ else
+ ac->ac_last_group = *bg_blkno;
+ }
+
+bail:
mlog_exit(status);
return status;
}
{
int status;
unsigned int bits_wanted = ac->ac_bits_wanted - ac->ac_bits_given;
- u64 bg_blkno;
+ u64 bg_blkno = 0;
u16 bg_bit_off;
mlog_entry_void();
}
group = (struct ocfs2_group_desc *) group_bh->b_data;
- if (!OCFS2_IS_VALID_GROUP_DESC(group)) {
- OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, group);
- status = -EIO;
+ status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, group);
+ if (status) {
+ mlog_errno(status);
goto bail;
}
BUG_ON((count + start_bit) > le16_to_cpu(group->bg_bits));
u16 ac_chain;
int ac_allow_chain_relink;
group_search_t *ac_group_search;
+
+ u64 ac_last_group;
};
void ocfs2_free_alloc_context(struct ocfs2_alloc_context *ac);
osb->bitmap_blkno = OCFS2_I(inode)->ip_blkno;
+ /* We don't have a cluster lock on the bitmap here because
+ * we're only interested in static information and the extra
+ * complexity at mount time isn't worht it. Don't pass the
+ * inode in to the read function though as we don't want it to
+ * be put in the cache. */
status = ocfs2_read_block(osb, osb->bitmap_blkno, &bitmap_bh, 0,
- inode);
+ NULL);
iput(inode);
if (status < 0) {
mlog_errno(status);
di = (struct ocfs2_dinode *) bitmap_bh->b_data;
osb->bitmap_cpg = le16_to_cpu(di->id2.i_chain.cl_cpg);
- osb->num_clusters = le32_to_cpu(di->id1.bitmap1.i_total);
brelse(bitmap_bh);
mlog(0, "cluster bitmap inode: %llu, clusters per group: %u\n",
(unsigned long long)osb->bitmap_blkno, osb->bitmap_cpg);
ei = (struct udf_inode_info *)kmem_cache_alloc(udf_inode_cachep, SLAB_KERNEL);
if (!ei)
return NULL;
+
+ ei->i_unique = 0;
+ ei->i_lenExtents = 0;
+ ei->i_next_alloc_block = 0;
+ ei->i_next_alloc_goal = 0;
+ ei->i_strat4096 = 0;
+
return &ei->vfs_inode;
}
&agbp)))
return error;
if (!pag->pagf_init) {
+ ASSERT(flags & XFS_ALLOC_FLAG_TRYLOCK);
+ ASSERT(!(flags & XFS_ALLOC_FLAG_FREEING));
args->agbp = NULL;
return 0;
}
} else
agbp = NULL;
- /* If this is a metadata preferred pag and we are user data
+ /*
+ * If this is a metadata preferred pag and we are user data
* then try somewhere else if we are not being asked to
* try harder at this point
*/
- if (pag->pagf_metadata && args->userdata && flags) {
+ if (pag->pagf_metadata && args->userdata &&
+ (flags & XFS_ALLOC_FLAG_TRYLOCK)) {
+ ASSERT(!(flags & XFS_ALLOC_FLAG_FREEING));
args->agbp = NULL;
return 0;
}
- need = XFS_MIN_FREELIST_PAG(pag, mp);
- delta = need > pag->pagf_flcount ? need - pag->pagf_flcount : 0;
- /*
- * If it looks like there isn't a long enough extent, or enough
- * total blocks, reject it.
- */
- longest = (pag->pagf_longest > delta) ?
- (pag->pagf_longest - delta) :
- (pag->pagf_flcount > 0 || pag->pagf_longest > 0);
- if (args->minlen + args->alignment + args->minalignslop - 1 > longest ||
- (!(flags & XFS_ALLOC_FLAG_FREEING) &&
- (int)(pag->pagf_freeblks + pag->pagf_flcount -
- need - args->total) <
- (int)args->minleft)) {
- if (agbp)
- xfs_trans_brelse(tp, agbp);
- args->agbp = NULL;
- return 0;
+ if (!(flags & XFS_ALLOC_FLAG_FREEING)) {
+ need = XFS_MIN_FREELIST_PAG(pag, mp);
+ delta = need > pag->pagf_flcount ? need - pag->pagf_flcount : 0;
+ /*
+ * If it looks like there isn't a long enough extent, or enough
+ * total blocks, reject it.
+ */
+ longest = (pag->pagf_longest > delta) ?
+ (pag->pagf_longest - delta) :
+ (pag->pagf_flcount > 0 || pag->pagf_longest > 0);
+ if ((args->minlen + args->alignment + args->minalignslop - 1) >
+ longest ||
+ ((int)(pag->pagf_freeblks + pag->pagf_flcount -
+ need - args->total) < (int)args->minleft)) {
+ if (agbp)
+ xfs_trans_brelse(tp, agbp);
+ args->agbp = NULL;
+ return 0;
+ }
}
+
/*
* Get the a.g. freespace buffer.
* Can fail if we're not blocking on locks, and it's held.
&agbp)))
return error;
if (agbp == NULL) {
+ ASSERT(flags & XFS_ALLOC_FLAG_TRYLOCK);
+ ASSERT(!(flags & XFS_ALLOC_FLAG_FREEING));
args->agbp = NULL;
return 0;
}
*/
agf = XFS_BUF_TO_AGF(agbp);
need = XFS_MIN_FREELIST(agf, mp);
- delta = need > be32_to_cpu(agf->agf_flcount) ?
- (need - be32_to_cpu(agf->agf_flcount)) : 0;
/*
* If there isn't enough total or single-extent, reject it.
*/
- longest = be32_to_cpu(agf->agf_longest);
- longest = (longest > delta) ? (longest - delta) :
- (be32_to_cpu(agf->agf_flcount) > 0 || longest > 0);
- if (args->minlen + args->alignment + args->minalignslop - 1 > longest ||
- (!(flags & XFS_ALLOC_FLAG_FREEING) &&
- (int)(be32_to_cpu(agf->agf_freeblks) +
- be32_to_cpu(agf->agf_flcount) - need - args->total) <
- (int)args->minleft)) {
- xfs_trans_brelse(tp, agbp);
- args->agbp = NULL;
- return 0;
+ if (!(flags & XFS_ALLOC_FLAG_FREEING)) {
+ delta = need > be32_to_cpu(agf->agf_flcount) ?
+ (need - be32_to_cpu(agf->agf_flcount)) : 0;
+ longest = be32_to_cpu(agf->agf_longest);
+ longest = (longest > delta) ? (longest - delta) :
+ (be32_to_cpu(agf->agf_flcount) > 0 || longest > 0);
+ if ((args->minlen + args->alignment + args->minalignslop - 1) >
+ longest ||
+ ((int)(be32_to_cpu(agf->agf_freeblks) +
+ be32_to_cpu(agf->agf_flcount) - need - args->total) <
+ (int)args->minleft)) {
+ xfs_trans_brelse(tp, agbp);
+ args->agbp = NULL;
+ return 0;
+ }
}
/*
* Make the freelist shorter if it's too long.
* on a completely full ag.
*/
if (targs.agbno == NULLAGBLOCK) {
- if (!(flags & XFS_ALLOC_FLAG_FREEING)) {
- xfs_trans_brelse(tp, agflbp);
- args->agbp = NULL;
- return 0;
- }
- break;
+ if (flags & XFS_ALLOC_FLAG_FREEING)
+ break;
+ xfs_trans_brelse(tp, agflbp);
+ args->agbp = NULL;
+ return 0;
}
/*
* Put each allocated block on the list.
xfs_fsblock_t bno, /* starting block number of extent */
xfs_extlen_t len) /* length of extent */
{
-#ifdef DEBUG
- xfs_agf_t *agf; /* a.g. freespace header */
-#endif
- xfs_alloc_arg_t args; /* allocation argument structure */
+ xfs_alloc_arg_t args;
int error;
ASSERT(len != 0);
+ memset(&args, 0, sizeof(xfs_alloc_arg_t));
args.tp = tp;
args.mp = tp->t_mountp;
args.agno = XFS_FSB_TO_AGNO(args.mp, bno);
ASSERT(args.agno < args.mp->m_sb.sb_agcount);
args.agbno = XFS_FSB_TO_AGBNO(args.mp, bno);
- args.alignment = 1;
- args.minlen = args.minleft = args.minalignslop = 0;
down_read(&args.mp->m_peraglock);
args.pag = &args.mp->m_perag[args.agno];
if ((error = xfs_alloc_fix_freelist(&args, XFS_ALLOC_FLAG_FREEING)))
goto error0;
#ifdef DEBUG
ASSERT(args.agbp != NULL);
- agf = XFS_BUF_TO_AGF(args.agbp);
- ASSERT(args.agbno + len <= be32_to_cpu(agf->agf_length));
+ ASSERT((args.agbno + len) <=
+ be32_to_cpu(XFS_BUF_TO_AGF(args.agbp)->agf_length));
#endif
- error = xfs_free_ag_extent(tp, args.agbp, args.agno, args.agbno,
- len, 0);
+ error = xfs_free_ag_extent(tp, args.agbp, args.agno, args.agbno, len, 0);
error0:
up_read(&args.mp->m_peraglock);
return error;
#endif
#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
#ifdef CONFIG_KEXEC
#define MAX_NOTE_BYTES 1024
-#ifdef __powerpc64__
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
extern int crashing_cpu;
{
return cpu_isset(cpu,cpus_in_sr);
}
-#endif /* __powerpc64 __ */
struct kimage;
struct pt_regs;
extern int rtas_get_power_level(int powerdomain, int *level);
extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
extern void rtas_progress(char *s, unsigned short hex);
extern void rtas_initialize(void);
#ifndef _LINUX_FB_H
#define _LINUX_FB_H
-#include <linux/backlight.h>
#include <asm/types.h>
/* Definitions of frame buffers */
#include <linux/workqueue.h>
#include <linux/notifier.h>
#include <linux/list.h>
+#include <linux/backlight.h>
#include <asm/io.h>
struct vm_area_struct;
{
struct net_device_stats *stats;
+ if (skb_bond_should_drop(skb)) {
+ dev_kfree_skb_any(skb);
+ return NET_RX_DROP;
+ }
+
skb->dev = grp->vlan_devices[vlan_tag & VLAN_VID_MASK];
if (skb->dev == NULL) {
dev_kfree_skb_any(skb);
extern void dump_stack(void);
#ifdef DEBUG
+/* If you are writing a driver, please use dev_dbg instead */
#define pr_debug(fmt,arg...) \
printk(KERN_DEBUG fmt,##arg)
#else
}
void put_page(struct page *page);
+void put_pages_list(struct list_head *pages);
void split_page(struct page *page, unsigned int order);
#define NETIF_F_TSO_ECN (SKB_GSO_TCP_ECN << NETIF_F_GSO_SHIFT)
#define NETIF_F_TSO6 (SKB_GSO_TCPV6 << NETIF_F_GSO_SHIFT)
+ /* List of features with software fallbacks. */
+#define NETIF_F_GSO_SOFTWARE (NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6)
+
#define NETIF_F_GEN_CSUM (NETIF_F_NO_CSUM | NETIF_F_HW_CSUM)
#define NETIF_F_ALL_CSUM (NETIF_F_IP_CSUM | NETIF_F_GEN_CSUM)
unlikely(skb->ip_summed != CHECKSUM_HW));
}
+/* On bonding slaves other than the currently active slave, suppress
+ * duplicates except for 802.3ad ETH_P_SLOW and alb non-mcast/bcast.
+ */
+static inline int skb_bond_should_drop(struct sk_buff *skb)
+{
+ struct net_device *dev = skb->dev;
+ struct net_device *master = dev->master;
+
+ if (master &&
+ (dev->priv_flags & IFF_SLAVE_INACTIVE)) {
+ if (master->priv_flags & IFF_MASTER_ALB) {
+ if (skb->pkt_type != PACKET_BROADCAST &&
+ skb->pkt_type != PACKET_MULTICAST)
+ return 0;
+ }
+ if (master->priv_flags & IFF_MASTER_8023AD &&
+ skb->protocol == __constant_htons(ETH_P_SLOW))
+ return 0;
+
+ return 1;
+ }
+ return 0;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_DEV_H */
return (len < skb->len) ? __pskb_trim(skb, len) : 0;
}
+/**
+ * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
+ * @skb: buffer to alter
+ * @len: new length
+ *
+ * This is identical to pskb_trim except that the caller knows that
+ * the skb is not cloned so we should never get an error due to out-
+ * of-memory.
+ */
+static inline void pskb_trim_unique(struct sk_buff *skb, unsigned int len)
+{
+ int err = pskb_trim(skb, len);
+ BUG_ON(err);
+}
+
/**
* skb_orphan - orphan a buffer
* @skb: buffer to orphan
* the headroom they think they need without accounting for the
* built in space. The built in space is used for optimisations.
*
- * %NULL is returned in there is no free memory.
+ * %NULL is returned if there is no free memory.
*/
static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
gfp_t gfp_mask)
* the headroom they think they need without accounting for the
* built in space. The built in space is used for optimisations.
*
- * %NULL is returned in there is no free memory. Although this function
+ * %NULL is returned if there is no free memory. Although this function
* allocates memory it can be called from an interrupt.
*/
static inline struct sk_buff *dev_alloc_skb(unsigned int length)
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
#include <linux/videodev.h>
#else
#include <linux/videodev2.h>
struct vm_area_struct * vma;
struct mm_struct *mm = current->mm;
- if (attempt >= 2 || !(vma = find_vma(mm, address)) ||
+ if (attempt > 2 || !(vma = find_vma(mm, address)) ||
vma->vm_start > address || !(vma->vm_flags & VM_WRITE))
return -EFAULT;
*/
if (attempt++) {
if (futex_handle_fault((unsigned long)uaddr2,
- attempt))
+ attempt)) {
+ ret = -EFAULT;
goto out;
+ }
goto retry;
}
* still holding the mmap_sem.
*/
if (attempt++) {
- if (futex_handle_fault((unsigned long)uaddr, attempt))
+ if (futex_handle_fault((unsigned long)uaddr, attempt)) {
+ ret = -EFAULT;
goto out_unlock_release_sem;
-
+ }
goto retry_locked;
}
* still holding the mmap_sem.
*/
if (attempt++) {
- if (futex_handle_fault((unsigned long)uaddr, attempt))
+ if (futex_handle_fault((unsigned long)uaddr, attempt)) {
+ ret = -EFAULT;
goto out_unlock;
-
+ }
goto retry_locked;
}
{
struct hrtimer_base *new_base;
- new_base = &__get_cpu_var(hrtimer_bases[base->index]);
+ new_base = &__get_cpu_var(hrtimer_bases)[base->index];
if (base != new_base) {
/*
#include <linux/interrupt.h>
#include <linux/nmi.h>
#include <linux/kexec.h>
+#include <linux/debug_locks.h>
int panic_on_oops;
int tainted;
}
/*
- * Accessing ->group_leader->real_parent is not SMP-safe, it could
- * change from under us. However, rather than getting any lock
- * we can use an optimistic algorithm: get the parent
- * pid, and go back and check that the parent is still
- * the same. If it has changed (which is extremely unlikely
- * indeed), we just try again..
- *
- * NOTE! This depends on the fact that even if we _do_
- * get an old value of "parent", we can happily dereference
- * the pointer (it was and remains a dereferencable kernel pointer
- * no matter what): we just can't necessarily trust the result
- * until we know that the parent pointer is valid.
- *
- * NOTE2: ->group_leader never changes from under us.
+ * Accessing ->real_parent is not SMP-safe, it could
+ * change from under us. However, we can use a stale
+ * value of ->real_parent under rcu_read_lock(), see
+ * release_task()->call_rcu(delayed_put_task_struct).
*/
asmlinkage long sys_getppid(void)
{
int pid;
- struct task_struct *me = current;
- struct task_struct *parent;
- parent = me->group_leader->real_parent;
- for (;;) {
- pid = parent->tgid;
-#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
-{
- struct task_struct *old = parent;
+ rcu_read_lock();
+ pid = rcu_dereference(current->real_parent)->tgid;
+ rcu_read_unlock();
- /*
- * Make sure we read the pid before re-reading the
- * parent pointer:
- */
- smp_rmb();
- parent = me->group_leader->real_parent;
- if (old != parent)
- continue;
-}
-#endif
- break;
- }
return pid;
}
/* All the per-cpu workqueues on the system, for hotplug cpu to add/remove
threads to each one as cpus come/go. */
-static DEFINE_SPINLOCK(workqueue_lock);
+static DEFINE_MUTEX(workqueue_mutex);
static LIST_HEAD(workqueues);
static int singlethread_cpu;
} else {
int cpu;
- lock_cpu_hotplug();
+ mutex_lock(&workqueue_mutex);
for_each_online_cpu(cpu)
flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
- unlock_cpu_hotplug();
+ mutex_unlock(&workqueue_mutex);
}
}
EXPORT_SYMBOL_GPL(flush_workqueue);
}
wq->name = name;
- /* We don't need the distraction of CPUs appearing and vanishing. */
- lock_cpu_hotplug();
+ mutex_lock(&workqueue_mutex);
if (singlethread) {
INIT_LIST_HEAD(&wq->list);
p = create_workqueue_thread(wq, singlethread_cpu);
else
wake_up_process(p);
} else {
- spin_lock(&workqueue_lock);
list_add(&wq->list, &workqueues);
- spin_unlock(&workqueue_lock);
for_each_online_cpu(cpu) {
p = create_workqueue_thread(wq, cpu);
if (p) {
destroy = 1;
}
}
- unlock_cpu_hotplug();
+ mutex_unlock(&workqueue_mutex);
/*
* Was there any error during startup? If yes then clean up:
flush_workqueue(wq);
/* We don't need the distraction of CPUs appearing and vanishing. */
- lock_cpu_hotplug();
+ mutex_lock(&workqueue_mutex);
if (is_single_threaded(wq))
cleanup_workqueue_thread(wq, singlethread_cpu);
else {
for_each_online_cpu(cpu)
cleanup_workqueue_thread(wq, cpu);
- spin_lock(&workqueue_lock);
list_del(&wq->list);
- spin_unlock(&workqueue_lock);
}
- unlock_cpu_hotplug();
+ mutex_unlock(&workqueue_mutex);
free_percpu(wq->cpu_wq);
kfree(wq);
}
if (!works)
return -ENOMEM;
+ mutex_lock(&workqueue_mutex);
for_each_online_cpu(cpu) {
INIT_WORK(per_cpu_ptr(works, cpu), func, info);
__queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu),
per_cpu_ptr(works, cpu));
}
+ mutex_unlock(&workqueue_mutex);
flush_workqueue(keventd_wq);
free_percpu(works);
return 0;
switch (action) {
case CPU_UP_PREPARE:
+ mutex_lock(&workqueue_mutex);
/* Create a new workqueue thread for it. */
list_for_each_entry(wq, &workqueues, list) {
if (!create_workqueue_thread(wq, hotcpu)) {
kthread_bind(cwq->thread, hotcpu);
wake_up_process(cwq->thread);
}
+ mutex_unlock(&workqueue_mutex);
break;
case CPU_UP_CANCELED:
any_online_cpu(cpu_online_map));
cleanup_workqueue_thread(wq, hotcpu);
}
+ mutex_unlock(&workqueue_mutex);
+ break;
+
+ case CPU_DOWN_PREPARE:
+ mutex_lock(&workqueue_mutex);
+ break;
+
+ case CPU_DOWN_FAILED:
+ mutex_unlock(&workqueue_mutex);
break;
case CPU_DEAD:
cleanup_workqueue_thread(wq, hotcpu);
list_for_each_entry(wq, &workqueues, list)
take_over_work(wq, hotcpu);
+ mutex_unlock(&workqueue_mutex);
break;
}
}
EXPORT_SYMBOL(put_page);
+/**
+ * put_pages_list(): release a list of pages
+ *
+ * Release a list of pages which are strung together on page.lru. Currently
+ * used by read_cache_pages() and related error recovery code.
+ *
+ * @pages: list of pages threaded on page->lru
+ */
+void put_pages_list(struct list_head *pages)
+{
+ while (!list_empty(pages)) {
+ struct page *victim;
+
+ victim = list_entry(pages->prev, struct page, lru);
+ list_del(&victim->lru);
+ page_cache_release(victim);
+ }
+}
+EXPORT_SYMBOL(put_pages_list);
+
/*
* Writeback is about to end against a page which has been marked for immediate
* reclaim. If it still appears to be reclaimable, move it to the tail of the
goto out;
}
-void __exit atm_proc_exit(void)
+void atm_proc_exit(void)
{
atm_proc_dirs_remove();
}
checksum = 0;
if (feature & NETIF_F_GSO)
- feature |= NETIF_F_TSO;
+ feature |= NETIF_F_GSO_SOFTWARE;
feature |= NETIF_F_GSO;
features &= feature;
}
+ if (!(checksum & NETIF_F_ALL_CSUM))
+ features &= ~NETIF_F_SG;
+ if (!(features & NETIF_F_SG))
+ features &= ~NETIF_F_GSO_MASK;
+
br->dev->features = features | checksum | NETIF_F_LLTX |
NETIF_F_GSO_ROBUST;
}
if (timer_pending(&ub->timer))
del_timer(&ub->timer);
+ if (!ub->skb)
+ return;
+
/* last nlmsg needs NLMSG_DONE */
if (ub->qlen > 1)
ub->lastnlh->nlmsg_type = NLMSG_DONE;
#include <linux/audit.h>
#include <linux/dmaengine.h>
#include <linux/err.h>
+#include <linux/ctype.h>
/*
* The list of packet types we will receive (as opposed to discard)
* @name: name string
*
* Network device names need to be valid file names to
- * to allow sysfs to work
+ * to allow sysfs to work. We also disallow any kind of
+ * whitespace.
*/
int dev_valid_name(const char *name)
{
- return !(*name == '\0'
- || !strcmp(name, ".")
- || !strcmp(name, "..")
- || strchr(name, '/'));
+ if (*name == '\0')
+ return 0;
+ if (!strcmp(name, ".") || !strcmp(name, ".."))
+ return 0;
+
+ while (*name) {
+ if (*name == '/' || isspace(*name))
+ return 0;
+ name++;
+ }
+ return 1;
}
/**
struct net_device *dev = skb->dev;
if (dev->master) {
- /*
- * On bonding slaves other than the currently active
- * slave, suppress duplicates except for 802.3ad
- * ETH_P_SLOW and alb non-mcast/bcast.
- */
- if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
- if (dev->master->priv_flags & IFF_MASTER_ALB) {
- if (skb->pkt_type != PACKET_BROADCAST &&
- skb->pkt_type != PACKET_MULTICAST)
- goto keep;
- }
-
- if (dev->master->priv_flags & IFF_MASTER_8023AD &&
- skb->protocol == __constant_htons(ETH_P_SLOW))
- goto keep;
-
+ if (skb_bond_should_drop(skb)) {
kfree_skb(skb);
return NULL;
}
-keep:
skb->dev = dev->master;
}
dst_gc_timer_inc = DST_GC_INC;
dst_gc_timer_expires = DST_GC_MIN;
}
- dst_gc_timer.expires = jiffies + dst_gc_timer_expires;
#if RT_CACHE_DEBUG >= 2
printk("dst_total: %d/%d %ld\n",
atomic_read(&dst_total), delayed, dst_gc_timer_expires);
#endif
- add_timer(&dst_gc_timer);
+ mod_timer(&dst_gc_timer, jiffies + dst_gc_timer_expires);
out:
spin_unlock(&dst_lock);
skb->mac.raw = ((u8 *) iph) - 14 - pkt_dev->nr_labels*sizeof(u32);
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
+ skb->nh.iph = iph;
+ skb->h.uh = udph;
if (pkt_dev->nfrags <= 0)
pgh = (struct pktgen_hdr *)skb_put(skb, datalen);
skb->protocol = protocol;
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
+ skb->nh.ipv6h = iph;
+ skb->h.uh = udph;
if (pkt_dev->nfrags <= 0)
pgh = (struct pktgen_hdr *)skb_put(skb, datalen);
}
if (ida[IFLA_ADDRESS - 1]) {
+ struct sockaddr *sa;
+ int len;
+
if (!dev->set_mac_address) {
err = -EOPNOTSUPP;
goto out;
if (ida[IFLA_ADDRESS - 1]->rta_len != RTA_LENGTH(dev->addr_len))
goto out;
- err = dev->set_mac_address(dev, RTA_DATA(ida[IFLA_ADDRESS - 1]));
+ len = sizeof(sa_family_t) + dev->addr_len;
+ sa = kmalloc(len, GFP_KERNEL);
+ if (!sa) {
+ err = -ENOMEM;
+ goto out;
+ }
+ sa->sa_family = dev->type;
+ memcpy(sa->sa_data, RTA_DATA(ida[IFLA_ADDRESS - 1]),
+ dev->addr_len);
+ err = dev->set_mac_address(dev, sa);
+ kfree(sa);
if (err)
goto out;
send_addr_notify = 1;
struct sk_buff *skb;
skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
- if (likely(skb))
+ if (likely(skb)) {
skb_reserve(skb, NET_SKB_PAD);
+ skb->dev = dev;
+ }
return skb;
}
static int net_random_reseed(void)
{
int i;
- unsigned long seed[NR_CPUS];
+ unsigned long seed;
- get_random_bytes(seed, sizeof(seed));
for_each_possible_cpu(i) {
struct nrnd_state *state = &per_cpu(net_rand_state,i);
- __net_srandom(state, seed[i]);
+
+ get_random_bytes(&seed, sizeof(seed));
+ __net_srandom(state, seed);
}
return 0;
}
#include <linux/init.h> /* for __init */
#include <linux/if_arp.h> /* ARPHRD_ETHER */
#include <linux/etherdevice.h> /* compare_ether_addr */
+#include <linux/interrupt.h>
#include <linux/wireless.h> /* Pretty obvious */
#include <net/iw_handler.h> /* New driver API */
*/
#ifdef WE_EVENT_RTNETLINK
+static struct sk_buff_head wireless_nlevent_queue;
+
+static void wireless_nlevent_process(unsigned long data)
+{
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&wireless_nlevent_queue)))
+ netlink_broadcast(rtnl, skb, 0, RTNLGRP_LINK, GFP_ATOMIC);
+}
+
+static DECLARE_TASKLET(wireless_nlevent_tasklet, wireless_nlevent_process, 0);
+
/* ---------------------------------------------------------------- */
/*
* Fill a rtnetlink message with our event data.
return;
}
NETLINK_CB(skb).dst_group = RTNLGRP_LINK;
- netlink_broadcast(rtnl, skb, 0, RTNLGRP_LINK, GFP_ATOMIC);
+ skb_queue_tail(&wireless_nlevent_queue, skb);
+ tasklet_schedule(&wireless_nlevent_tasklet);
+}
+
+static int __init wireless_nlevent_init(void)
+{
+ skb_queue_head_init(&wireless_nlevent_queue);
+ return 0;
}
+
+subsys_initcall(wireless_nlevent_init);
#endif /* WE_EVENT_RTNETLINK */
/* ---------------------------------------------------------------- */
void fib_release_info(struct fib_info *fi)
{
- write_lock(&fib_info_lock);
+ write_lock_bh(&fib_info_lock);
if (fi && --fi->fib_treeref == 0) {
hlist_del(&fi->fib_hash);
if (fi->fib_prefsrc)
fi->fib_dead = 1;
fib_info_put(fi);
}
- write_unlock(&fib_info_lock);
+ write_unlock_bh(&fib_info_lock);
}
static __inline__ int nh_comp(const struct fib_info *fi, const struct fib_info *ofi)
unsigned int old_size = fib_hash_size;
unsigned int i, bytes;
- write_lock(&fib_info_lock);
+ write_lock_bh(&fib_info_lock);
old_info_hash = fib_info_hash;
old_laddrhash = fib_info_laddrhash;
fib_hash_size = new_size;
}
fib_info_laddrhash = new_laddrhash;
- write_unlock(&fib_info_lock);
+ write_unlock_bh(&fib_info_lock);
bytes = old_size * sizeof(struct hlist_head *);
fib_hash_free(old_info_hash, bytes);
fi->fib_treeref++;
atomic_inc(&fi->fib_clntref);
- write_lock(&fib_info_lock);
+ write_lock_bh(&fib_info_lock);
hlist_add_head(&fi->fib_hash,
&fib_info_hash[fib_info_hashfn(fi)]);
if (fi->fib_prefsrc) {
head = &fib_info_devhash[hash];
hlist_add_head(&nh->nh_hash, head);
} endfor_nexthops(fi)
- write_unlock(&fib_info_lock);
+ write_unlock_bh(&fib_info_lock);
return fi;
err_inval:
struct in_device *in_dev;
u32 group = imr->imr_multiaddr.s_addr;
u32 ifindex;
+ int ret = -EADDRNOTAVAIL;
rtnl_lock();
in_dev = ip_mc_find_dev(imr);
- if (!in_dev) {
- rtnl_unlock();
- return -ENODEV;
- }
ifindex = imr->imr_ifindex;
for (imlp = &inet->mc_list; (iml = *imlp) != NULL; imlp = &iml->next) {
- if (iml->multi.imr_multiaddr.s_addr == group &&
- iml->multi.imr_ifindex == ifindex) {
- (void) ip_mc_leave_src(sk, iml, in_dev);
+ if (iml->multi.imr_multiaddr.s_addr != group)
+ continue;
+ if (ifindex) {
+ if (iml->multi.imr_ifindex != ifindex)
+ continue;
+ } else if (imr->imr_address.s_addr && imr->imr_address.s_addr !=
+ iml->multi.imr_address.s_addr)
+ continue;
+
+ (void) ip_mc_leave_src(sk, iml, in_dev);
- *imlp = iml->next;
+ *imlp = iml->next;
+ if (in_dev)
ip_mc_dec_group(in_dev, group);
- rtnl_unlock();
- sock_kfree_s(sk, iml, sizeof(*iml));
- return 0;
- }
+ rtnl_unlock();
+ sock_kfree_s(sk, iml, sizeof(*iml));
+ return 0;
}
+ if (!in_dev)
+ ret = -ENODEV;
rtnl_unlock();
- return -EADDRNOTAVAIL;
+ return ret;
}
int ip_mc_source(int add, int omode, struct sock *sk, struct
struct in_device *in_dev;
inet->mc_list = iml->next;
- if ((in_dev = inetdev_by_index(iml->multi.imr_ifindex)) != NULL) {
- (void) ip_mc_leave_src(sk, iml, in_dev);
+ in_dev = inetdev_by_index(iml->multi.imr_ifindex);
+ (void) ip_mc_leave_src(sk, iml, in_dev);
+ if (in_dev != NULL) {
ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
in_dev_put(in_dev);
}
sock_kfree_s(sk, iml, sizeof(*iml));
-
}
rtnl_unlock();
}
skb_prev->csum = csum_sub(skb_prev->csum,
skb->csum);
data += fraggap;
- skb_trim(skb_prev, maxfraglen);
+ pskb_trim_unique(skb_prev, maxfraglen);
}
copy = datalen - transhdrlen - fraggap;
data, fraggap, 0);
skb_prev->csum = csum_sub(skb_prev->csum,
skb->csum);
- skb_trim(skb_prev, maxfraglen);
+ pskb_trim_unique(skb_prev, maxfraglen);
}
/*
{
int ret;
- xt_proto_init(NF_ARP);
+ ret = xt_proto_init(NF_ARP);
+ if (ret < 0)
+ goto err1;
/* Noone else will be downing sem now, so we won't sleep */
- xt_register_target(&arpt_standard_target);
- xt_register_target(&arpt_error_target);
+ ret = xt_register_target(&arpt_standard_target);
+ if (ret < 0)
+ goto err2;
+ ret = xt_register_target(&arpt_error_target);
+ if (ret < 0)
+ goto err3;
/* Register setsockopt */
ret = nf_register_sockopt(&arpt_sockopts);
- if (ret < 0) {
- duprintf("Unable to register sockopts.\n");
- return ret;
- }
+ if (ret < 0)
+ goto err4;
printk("arp_tables: (C) 2002 David S. Miller\n");
return 0;
+
+err4:
+ xt_unregister_target(&arpt_error_target);
+err3:
+ xt_unregister_target(&arpt_standard_target);
+err2:
+ xt_proto_fini(NF_ARP);
+err1:
+ return ret;
}
static void __exit arp_tables_fini(void)
cb->args[0], *id);
read_lock_bh(&ip_conntrack_lock);
+ last = (struct ip_conntrack *)cb->args[1];
for (; cb->args[0] < ip_conntrack_htable_size; cb->args[0]++) {
restart:
- last = (struct ip_conntrack *)cb->args[1];
list_for_each_prev(i, &ip_conntrack_hash[cb->args[0]]) {
h = (struct ip_conntrack_tuple_hash *) i;
if (DIRECTION(h) != IP_CT_DIR_ORIGINAL)
continue;
ct = tuplehash_to_ctrack(h);
- if (last != NULL) {
- if (ct == last) {
- ip_conntrack_put(last);
- cb->args[1] = 0;
- last = NULL;
- } else
+ if (cb->args[1]) {
+ if (ct != last)
continue;
+ cb->args[1] = 0;
}
if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq,
goto out;
}
}
- if (last != NULL) {
- ip_conntrack_put(last);
+ if (cb->args[1]) {
cb->args[1] = 0;
goto restart;
}
}
out:
read_unlock_bh(&ip_conntrack_lock);
+ if (last)
+ ip_conntrack_put(last);
DEBUGP("leaving, last bucket=%lu id=%u\n", cb->args[0], *id);
-
return skb->len;
}
const char *indev, *outdev;
void *table_base;
struct ipt_entry *e, *back;
- struct xt_table_info *private = table->private;
+ struct xt_table_info *private;
/* Initialization */
ip = (*pskb)->nh.iph;
read_lock_bh(&table->lock);
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+ private = table->private;
table_base = (void *)private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
{
int ret;
- xt_proto_init(AF_INET);
+ ret = xt_proto_init(AF_INET);
+ if (ret < 0)
+ goto err1;
/* Noone else will be downing sem now, so we won't sleep */
- xt_register_target(&ipt_standard_target);
- xt_register_target(&ipt_error_target);
- xt_register_match(&icmp_matchstruct);
+ ret = xt_register_target(&ipt_standard_target);
+ if (ret < 0)
+ goto err2;
+ ret = xt_register_target(&ipt_error_target);
+ if (ret < 0)
+ goto err3;
+ ret = xt_register_match(&icmp_matchstruct);
+ if (ret < 0)
+ goto err4;
/* Register setsockopt */
ret = nf_register_sockopt(&ipt_sockopts);
- if (ret < 0) {
- duprintf("Unable to register sockopts.\n");
- return ret;
- }
+ if (ret < 0)
+ goto err5;
printk("ip_tables: (C) 2000-2006 Netfilter Core Team\n");
return 0;
+
+err5:
+ xt_unregister_match(&icmp_matchstruct);
+err4:
+ xt_unregister_target(&ipt_error_target);
+err3:
+ xt_unregister_target(&ipt_standard_target);
+err2:
+ xt_proto_fini(AF_INET);
+err1:
+ return ret;
}
static void __exit ip_tables_fini(void)
del_timer(&ub->timer);
}
+ if (!ub->skb) {
+ DEBUGP("ipt_ULOG: ulog_send: nothing to send\n");
+ return;
+ }
+
/* last nlmsg needs NLMSG_DONE */
if (ub->qlen > 1)
ub->lastnlh->nlmsg_type = NLMSG_DONE;
dh->rateinfo.credit_cap = user2credits(hinfo->cfg.avg *
hinfo->cfg.burst);
dh->rateinfo.cost = user2credits(hinfo->cfg.avg);
-
- spin_unlock_bh(&hinfo->lock);
- return 1;
+ } else {
+ /* update expiration timeout */
+ dh->expires = now + msecs_to_jiffies(hinfo->cfg.expire);
+ rateinfo_recalc(dh, now);
}
- /* update expiration timeout */
- dh->expires = now + msecs_to_jiffies(hinfo->cfg.expire);
-
- rateinfo_recalc(dh, now);
if (dh->rateinfo.credit >= dh->rateinfo.cost) {
/* We're underlimit. */
dh->rateinfo.credit -= dh->rateinfo.cost;
rhash_entries,
(num_physpages >= 128 * 1024) ?
15 : 17,
- HASH_HIGHMEM,
+ 0,
&rt_hash_log,
&rt_hash_mask,
0);
if (skb->len != tcp_header_size)
tcp_event_data_sent(tp, skb, sk);
- TCP_INC_STATS(TCP_MIB_OUTSEGS);
+ if (after(tcb->end_seq, tp->snd_nxt) || tcb->seq == tcb->end_seq)
+ TCP_INC_STATS(TCP_MIB_OUTSEGS);
err = icsk->icsk_af_ops->queue_xmit(skb, 0);
if (likely(err <= 0))
skb_shinfo(buff)->gso_size = 0;
skb_shinfo(buff)->gso_type = 0;
buff->csum = 0;
+ tp->snd_nxt = tp->write_seq;
TCP_SKB_CB(buff)->seq = tp->write_seq++;
TCP_SKB_CB(buff)->end_seq = tp->write_seq;
- tp->snd_nxt = tp->write_seq;
- tp->pushed_seq = tp->write_seq;
/* Send it off. */
TCP_SKB_CB(buff)->when = tcp_time_stamp;
sk_charge_skb(sk, buff);
tp->packets_out += tcp_skb_pcount(buff);
tcp_transmit_skb(sk, buff, 1, GFP_KERNEL);
+
+ /* We change tp->snd_nxt after the tcp_transmit_skb() call
+ * in order to make this packet get counted in tcpOutSegs.
+ */
+ tp->snd_nxt = tp->write_seq;
+ tp->pushed_seq = tp->write_seq;
TCP_INC_STATS(TCP_MIB_ACTIVEOPENS);
/* Timer for repeating the SYN until an answer. */
error = wait_event_interruptible(tcpw.wait,
__kfifo_len(tcpw.fifo) != 0);
if (error)
- return error;
+ goto out_free;
cnt = kfifo_get(tcpw.fifo, tbuf, len);
error = copy_to_user(buf, tbuf, cnt);
+out_free:
vfree(tbuf);
return error ? error : cnt;
ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
if (!IS_ERR(ifp)) {
- spin_lock(&ifp->lock);
+ spin_lock_bh(&ifp->lock);
ifp->valid_lft = valid_lft;
ifp->prefered_lft = prefered_lft;
ifp->tstamp = jiffies;
- spin_unlock(&ifp->lock);
+ spin_unlock_bh(&ifp->lock);
addrconf_dad_start(ifp, 0);
in6_ifa_put(ifp);
return 0;
}
+/*
+ * Special lock-class for __icmpv6_socket:
+ */
+static struct lock_class_key icmpv6_socket_sk_dst_lock_key;
+
int __init icmpv6_init(struct net_proto_family *ops)
{
struct sock *sk;
sk = per_cpu(__icmpv6_socket, i)->sk;
sk->sk_allocation = GFP_ATOMIC;
+ /*
+ * Split off their lock-class, because sk->sk_dst_lock
+ * gets used from softirqs, which is safe for
+ * __icmpv6_socket (because those never get directly used
+ * via userspace syscalls), but unsafe for normal sockets.
+ */
+ lockdep_set_class(&sk->sk_dst_lock,
+ &icmpv6_socket_sk_dst_lock_key);
/* Enough space for 2 64K ICMP packets, including
* sk_buff struct overhead.
skb_prev->csum = csum_sub(skb_prev->csum,
skb->csum);
data += fraggap;
- skb_trim(skb_prev, maxfraglen);
+ pskb_trim_unique(skb_prev, maxfraglen);
}
copy = datalen - transhdrlen - fraggap;
if (copy < 0) {
if ((dev = dev_get_by_index(mc_lst->ifindex)) != NULL) {
struct inet6_dev *idev = in6_dev_get(dev);
+ (void) ip6_mc_leave_src(sk, mc_lst, idev);
if (idev) {
- (void) ip6_mc_leave_src(sk,mc_lst,idev);
__ipv6_dev_mc_dec(idev, &mc_lst->addr);
in6_dev_put(idev);
}
dev_put(dev);
- }
+ } else
+ (void) ip6_mc_leave_src(sk, mc_lst, NULL);
sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
return 0;
}
if (dev) {
struct inet6_dev *idev = in6_dev_get(dev);
+ (void) ip6_mc_leave_src(sk, mc_lst, idev);
if (idev) {
- (void) ip6_mc_leave_src(sk, mc_lst, idev);
__ipv6_dev_mc_dec(idev, &mc_lst->addr);
in6_dev_put(idev);
}
dev_put(dev);
- }
+ } else
+ (void) ip6_mc_leave_src(sk, mc_lst, NULL);
sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
{
int ret;
- xt_proto_init(AF_INET6);
+ ret = xt_proto_init(AF_INET6);
+ if (ret < 0)
+ goto err1;
/* Noone else will be downing sem now, so we won't sleep */
- xt_register_target(&ip6t_standard_target);
- xt_register_target(&ip6t_error_target);
- xt_register_match(&icmp6_matchstruct);
+ ret = xt_register_target(&ip6t_standard_target);
+ if (ret < 0)
+ goto err2;
+ ret = xt_register_target(&ip6t_error_target);
+ if (ret < 0)
+ goto err3;
+ ret = xt_register_match(&icmp6_matchstruct);
+ if (ret < 0)
+ goto err4;
/* Register setsockopt */
ret = nf_register_sockopt(&ip6t_sockopts);
- if (ret < 0) {
- duprintf("Unable to register sockopts.\n");
- xt_proto_fini(AF_INET6);
- return ret;
- }
+ if (ret < 0)
+ goto err5;
printk("ip6_tables: (C) 2000-2006 Netfilter Core Team\n");
return 0;
+
+err5:
+ xt_unregister_match(&icmp6_matchstruct);
+err4:
+ xt_unregister_target(&ip6t_error_target);
+err3:
+ xt_unregister_target(&ip6t_standard_target);
+err2:
+ xt_proto_fini(AF_INET6);
+err1:
+ return ret;
}
static void __exit ip6_tables_fini(void)
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
goto out;
- ipx = ipx_hdr(skb);
- ipx_pktsize = ntohs(ipx->ipx_pktsize);
+ if (!pskb_may_pull(skb, sizeof(struct ipxhdr)))
+ goto drop;
+
+ ipx_pktsize = ntohs(ipx_hdr(skb)->ipx_pktsize);
/* Too small or invalid header? */
- if (ipx_pktsize < sizeof(struct ipxhdr) || ipx_pktsize > skb->len)
+ if (ipx_pktsize < sizeof(struct ipxhdr) ||
+ !pskb_may_pull(skb, ipx_pktsize))
goto drop;
+ ipx = ipx_hdr(skb);
if (ipx->ipx_checksum != IPX_NO_CHECKSUM &&
ipx->ipx_checksum != ipx_cksum(ipx, ipx_pktsize))
goto drop;
if (llc->laddr.lsap != laddr->lsap)
continue;
+ if (llc->dev != skb->dev)
+ continue;
+
skb1 = skb_clone(skb, GFP_ATOMIC);
if (!skb1)
break;
cb->args[0], *id);
read_lock_bh(&nf_conntrack_lock);
+ last = (struct nf_conn *)cb->args[1];
for (; cb->args[0] < nf_conntrack_htable_size; cb->args[0]++) {
restart:
- last = (struct nf_conn *)cb->args[1];
list_for_each_prev(i, &nf_conntrack_hash[cb->args[0]]) {
h = (struct nf_conntrack_tuple_hash *) i;
if (DIRECTION(h) != IP_CT_DIR_ORIGINAL)
* then dump everything. */
if (l3proto && L3PROTO(ct) != l3proto)
continue;
- if (last != NULL) {
- if (ct == last) {
- nf_ct_put(last);
- cb->args[1] = 0;
- last = NULL;
- } else
+ if (cb->args[1]) {
+ if (ct != last)
continue;
+ cb->args[1] = 0;
}
if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq,
goto out;
}
}
- if (last != NULL) {
- nf_ct_put(last);
+ if (cb->args[1]) {
cb->args[1] = 0;
goto restart;
}
}
out:
read_unlock_bh(&nf_conntrack_lock);
+ if (last)
+ nf_ct_put(last);
DEBUGP("leaving, last bucket=%lu id=%u\n", cb->args[0], *id);
-
return skb->len;
}
if (timer_pending(&inst->timer))
del_timer(&inst->timer);
+ if (!inst->skb)
+ return 0;
+
if (inst->qlen > 1)
inst->lastnlh->nlmsg_type = NLMSG_DONE;
#include <linux/module.h>
#include <linux/skbuff.h>
+#include <linux/netfilter_bridge.h>
#include <linux/netfilter/xt_physdev.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter_bridge.h>
return (skb_find_text((struct sk_buff *)skb, conf->from_offset,
conf->to_offset, conf->config, &state)
- != UINT_MAX) && !conf->invert;
+ != UINT_MAX) ^ conf->invert;
}
#define STRING_TEXT_PRIV(m) ((struct xt_string_info *) m)
{
printk("u32 classifier\n");
#ifdef CONFIG_CLS_U32_PERF
- printk(" Perfomance counters on\n");
+ printk(" Performance counters on\n");
#endif
#ifdef CONFIG_NET_CLS_POLICE
printk(" OLD policer on \n");
}
EXPORT_SYMBOL(__xfrm_route_forward);
+/* Optimize later using cookies and generation ids. */
+
static struct dst_entry *xfrm_dst_check(struct dst_entry *dst, u32 cookie)
{
- /* If it is marked obsolete, which is how we even get here,
- * then we have purged it from the policy bundle list and we
- * did that for a good reason.
+ /* Code (such as __xfrm4_bundle_create()) sets dst->obsolete
+ * to "-1" to force all XFRM destinations to get validated by
+ * dst_ops->check on every use. We do this because when a
+ * normal route referenced by an XFRM dst is obsoleted we do
+ * not go looking around for all parent referencing XFRM dsts
+ * so that we can invalidate them. It is just too much work.
+ * Instead we make the checks here on every use. For example:
+ *
+ * XFRM dst A --> IPv4 dst X
+ *
+ * X is the "xdst->route" of A (X is also the "dst->path" of A
+ * in this example). If X is marked obsolete, "A" will not
+ * notice. That's what we are validating here via the
+ * stale_bundle() check.
+ *
+ * When a policy's bundle is pruned, we dst_free() the XFRM
+ * dst which causes it's ->obsolete field to be set to a
+ * positive non-zero integer. If an XFRM dst has been pruned
+ * like this, we want to force a new route lookup.
*/
+ if (dst->obsolete < 0 && !stale_bundle(dst))
+ return dst;
+
return NULL;
}
unsigned int i;
for (i = min; i < max; i++)
- if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
+ if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG)))
sprintf(alias + strlen(alias), "%X,*", i);
}
For more information on this driver and the degree of support for
the different card models please check:
- <http://sourceforge.net/projects/emu10k1/>
+ <http://sourceforge.net/projects/emu10k1/>
It is now possible to load dsp microcode patches into the EMU10K1
chip. These patches are used to implement real time sound
system support" and "Sysctl support", and after the /proc file
system has been mounted, executing the command
- command what is enabled
+ command what is enabled
echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME && I2C
+ depends on SOUND_PRIME && I2C && VIDEO_V4L1
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
will be called snd-ad1889.
config SND_ALS300
- tristate "Avance Logic ALS300/ALS300+"
- depends on SND
- select SND_PCM
- select SND_AC97_CODEC
- select SND_OPL3_LIB
- help
- Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+ tristate "Avance Logic ALS300/ALS300+"
+ depends on SND
+ select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
- To compile this driver as a module, choose M here: the module
- will be called snd-als300
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
config SND_ALS4000
tristate "Avance Logic ALS4000"
will be called snd-atiixp-modem.
config SND_AU8810
- tristate "Aureal Advantage"
- depends on SND
+ tristate "Aureal Advantage"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
-
+
config SND_AU8820
- tristate "Aureal Vortex"
- depends on SND
+ tristate "Aureal Vortex"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex soundcards.
- Supported features: Hardware Mixer and SRC. For more info, email
- the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
-
+
config SND_AU8830
- tristate "Aureal Vortex 2"
- depends on SND
+ tristate "Aureal Vortex 2"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex 2 soundcards.
- Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
-
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
will be called snd-azt3328.
config SND_BT87X
- tristate "Bt87x Audio Capture"
- depends on SND
+ tristate "Bt87x Audio Capture"
+ depends on SND
select SND_PCM
- help
+ help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
config SND_CS46XX_NEW_DSP
bool "Cirrus Logic (Sound Fusion) New DSP support"
depends on SND_CS46XX
- default y
+ default y
help
Say Y here to use a new DSP image for SPDIF and dual codecs.
referred to as NS CS5535 IO or AMD CS5535 IO companion in
various literature. This driver also supports the CS5536 audio
device. However, for both chips, on certain boards, you may
- need to use ac97_quirk=hp_only if your board has physically
+ need to use ac97_quirk=hp_only if your board has physically
mapped headphone out to master output. If that works for you,
send lspci -vvv output to the mailing list so that your board
can be identified in the quirks list.
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
Forte SF256-PCS-02) into the snd-fm801 driver.
+ This will enable support for the old V4L1 API.
+
config SND_FM801_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
- select VIDEO_DEV
+ select VIDEO_V4L1
config SND_HDA_INTEL
tristate "Intel HD Audio"
cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
targets := initramfs_data.cpio.gz
+# do not try to update files included in initramfs
+$(deps_initramfs): ;
+
$(deps_initramfs): klibcdirs
# We rebuild initramfs_data.cpio.gz if:
# 1) Any included file is newer then initramfs_data.cpio.gz
projects / mirror_ubuntu-artful-kernel.git / commitdiff