The most important field in the nand_bbt_descr structure is the
options field. The options define most of the table properties. Use the
-predefined constants from nand.h to define the options.
+predefined constants from rawnand.h to define the options.
- Number of bits per block
Constants for chip id table
~~~~~~~~~~~~~~~~~~~~~~~~~~~
-These constants are defined in nand.h. They are OR-ed together to
+These constants are defined in rawnand.h. They are OR-ed together to
describe the chip functionality::
/* Buswitdh is 16 bit */
Constants for runtime options
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-These constants are defined in nand.h. They are OR-ed together to
+These constants are defined in rawnand.h. They are OR-ed together to
describe the functionality::
/* The hw ecc generator provides a syndrome instead a ecc value on read
with an [XXX] identifier. See the chapter "Documentation hints" for an
explanation.
-.. kernel-doc:: include/linux/mtd/nand.h
+.. kernel-doc:: include/linux/mtd/rawnand.h
:internal:
Public Functions Provided
T: git git://git.infradead.org/l2-mtd.git nand/next
S: Maintained
F: drivers/mtd/nand/
-F: include/linux/mtd/nand*.h
+F: include/linux/mtd/*nand*.h
NATSEMI ETHERNET DRIVER (DP8381x)
S: Orphan
#include <linux/input/tps6507x-ts.h>
#include <linux/mfd/tps6507x.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/platform_data/at24.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/phy.h>
#include <media/i2c/adv7343.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/export.h>
#include <linux/i2c.h>
#include <linux/platform_data/at24.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/fb.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <mach/hardware.h>
#include <linux/platform_data/video-ep93xx.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <mach/hardware.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/interrupt.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include "common.h"
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <linux/types.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/max1586.h>
#include <linux/dm9000.h>
#include <linux/platform_data/rtc-v3020.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/mfd/tc6387xb.h>
#include <linux/mfd/tc6393xb.h>
#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/memblock.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mmc/host.h>
#include <linux/mfd/tc6393xb.h>
#include <linux/mfd/tmio.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mfd/pcf50633/pmic.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi_gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/memblock.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/plat-ram.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <arch/memmap.h>
#include <hwregs/reg_map.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <arch/memmap.h>
#include <hwregs/reg_map.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#ifndef __ASM_MACH_JZ4740_JZ4740_NAND_H__
#define __ASM_MACH_JZ4740_JZ4740_NAND_H__
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#define JZ_NAND_NUM_BANKS 4
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <asm/netlogic/haldefs.h>
#include <linux/resource.h>
#include <linux/serial.h>
#include <linux/serial_pnx8xxx.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <irq.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/mfd/tmio.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/i2c.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nftl.h>
#include <linux/mtd/inftl.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/mfd/syscon/atmel-matrix.h>
#include <linux/mfd/syscon/atmel-smc.h>
#include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/genalloc.h>
#include <linux/iopoll.h>
#include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#endif
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
struct bcm47xxnflash {
struct bcma_drv_cc *cc;
#include <linux/bitops.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/bitops.h>
#include <linux/mm.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/device.h>
#undef DEBUG
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/rslib.h>
#include <linux/pci.h>
* CM-X270 board.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#define __DENALI_H__
#include <linux/bitops.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK(bank) BIT(bank)
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/doc2000.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/inftl.h>
#include <linux/bitops.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/bch.h>
#include <linux/bitrev.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/fsl_ifc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand-gpio.h>
#include <linux/of.h>
#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
#define __DRIVERS_MTD_NAND_GPMI_NAND_H
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/jz4780-nemc.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
#include <linux/iopoll.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/interrupt.h>
#include <linux/device.h>
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static void amd_nand_decode_id(struct nand_chip *chip)
{
#include <linux/nmi.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/bbm.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_bch.h>
#include <linux/bch.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/byteorder.h>
#else
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/sizes.h>
#include <linux/slab.h>
* published by the Free Software Foundation.
*
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/sizes.h>
#define LP_OPTIONS 0
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static int macronix_nand_init(struct nand_chip *chip)
{
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
/*
* Special Micron status bit that indicates when the block has been
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static void samsung_nand_decode_id(struct nand_chip *chip)
{
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/export.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static const struct nand_data_interface onfi_sdr_timings[] = {
/* Mode 0 */
* GNU General Public License for more details.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_bch.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
*
*/
#include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/ndfc.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#define REG_FMICSR 0x00
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/omap-dma.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
struct plat_nand_data {
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/spinlock.h>
#include <linux/of_device.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/sharpsl.h>
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/module.h>
#include <linux/sizes.h>
#include "sm_common.h"
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/module.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
* Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de>
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/of_gpio.h>
#include <linux/of_platform.h>
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nftl.h>
#include <linux/mtd/blktrans.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nftl.h>
#define SECTORSIZE 512
#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/blktrans.h>
struct ssfdcr_record {
#include <linux/moduleparam.h>
#include <linux/mtd/mtd.h>
#include <linux/err.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/slab.h>
#include "mtd_test.h"
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/spi/spi.h>
#include "mt29f_spinand.h"
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/crc32.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#ifndef __LINUX_MTD_NAND_GPIO_H
#define __LINUX_MTD_NAND_GPIO_H
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
struct gpio_nand_platdata {
int gpio_nce;
+++ /dev/null
-/*
- * linux/include/linux/mtd/nand.h
- *
- * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
- * Steven J. Hill <sjhill@realitydiluted.com>
- * Thomas Gleixner <tglx@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Info:
- * Contains standard defines and IDs for NAND flash devices
- *
- * Changelog:
- * See git changelog.
- */
-#ifndef __LINUX_MTD_NAND_H
-#define __LINUX_MTD_NAND_H
-
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/bbm.h>
-
-struct mtd_info;
-struct nand_flash_dev;
-struct device_node;
-
-/* Scan and identify a NAND device */
-int nand_scan(struct mtd_info *mtd, int max_chips);
-/*
- * Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type.
- */
-int nand_scan_ident(struct mtd_info *mtd, int max_chips,
- struct nand_flash_dev *table);
-int nand_scan_tail(struct mtd_info *mtd);
-
-/* Unregister the MTD device and free resources held by the NAND device */
-void nand_release(struct mtd_info *mtd);
-
-/* Internal helper for board drivers which need to override command function */
-void nand_wait_ready(struct mtd_info *mtd);
-
-/* locks all blocks present in the device */
-int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* unlocks specified locked blocks */
-int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS 8
-
-/*
- * Constants for hardware specific CLE/ALE/NCE function
- *
- * These are bits which can be or'ed to set/clear multiple
- * bits in one go.
- */
-/* Select the chip by setting nCE to low */
-#define NAND_NCE 0x01
-/* Select the command latch by setting CLE to high */
-#define NAND_CLE 0x02
-/* Select the address latch by setting ALE to high */
-#define NAND_ALE 0x04
-
-#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE)
-#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE)
-#define NAND_CTRL_CHANGE 0x80
-
-/*
- * Standard NAND flash commands
- */
-#define NAND_CMD_READ0 0
-#define NAND_CMD_READ1 1
-#define NAND_CMD_RNDOUT 5
-#define NAND_CMD_PAGEPROG 0x10
-#define NAND_CMD_READOOB 0x50
-#define NAND_CMD_ERASE1 0x60
-#define NAND_CMD_STATUS 0x70
-#define NAND_CMD_SEQIN 0x80
-#define NAND_CMD_RNDIN 0x85
-#define NAND_CMD_READID 0x90
-#define NAND_CMD_ERASE2 0xd0
-#define NAND_CMD_PARAM 0xec
-#define NAND_CMD_GET_FEATURES 0xee
-#define NAND_CMD_SET_FEATURES 0xef
-#define NAND_CMD_RESET 0xff
-
-#define NAND_CMD_LOCK 0x2a
-#define NAND_CMD_UNLOCK1 0x23
-#define NAND_CMD_UNLOCK2 0x24
-
-/* Extended commands for large page devices */
-#define NAND_CMD_READSTART 0x30
-#define NAND_CMD_RNDOUTSTART 0xE0
-#define NAND_CMD_CACHEDPROG 0x15
-
-#define NAND_CMD_NONE -1
-
-/* Status bits */
-#define NAND_STATUS_FAIL 0x01
-#define NAND_STATUS_FAIL_N1 0x02
-#define NAND_STATUS_TRUE_READY 0x20
-#define NAND_STATUS_READY 0x40
-#define NAND_STATUS_WP 0x80
-
-#define NAND_DATA_IFACE_CHECK_ONLY -1
-
-/*
- * Constants for ECC_MODES
- */
-typedef enum {
- NAND_ECC_NONE,
- NAND_ECC_SOFT,
- NAND_ECC_HW,
- NAND_ECC_HW_SYNDROME,
- NAND_ECC_HW_OOB_FIRST,
- NAND_ECC_ON_DIE,
-} nand_ecc_modes_t;
-
-enum nand_ecc_algo {
- NAND_ECC_UNKNOWN,
- NAND_ECC_HAMMING,
- NAND_ECC_BCH,
-};
-
-/*
- * Constants for Hardware ECC
- */
-/* Reset Hardware ECC for read */
-#define NAND_ECC_READ 0
-/* Reset Hardware ECC for write */
-#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrome is read back from flash */
-#define NAND_ECC_READSYN 2
-
-/*
- * Enable generic NAND 'page erased' check. This check is only done when
- * ecc.correct() returns -EBADMSG.
- * Set this flag if your implementation does not fix bitflips in erased
- * pages and you want to rely on the default implementation.
- */
-#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
-#define NAND_ECC_MAXIMIZE BIT(1)
-/*
- * If your controller already sends the required NAND commands when
- * reading or writing a page, then the framework is not supposed to
- * send READ0 and SEQIN/PAGEPROG respectively.
- */
-#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2)
-
-/* Bit mask for flags passed to do_nand_read_ecc */
-#define NAND_GET_DEVICE 0x80
-
-
-/*
- * Option constants for bizarre disfunctionality and real
- * features.
- */
-/* Buswidth is 16 bit */
-#define NAND_BUSWIDTH_16 0x00000002
-/* Chip has cache program function */
-#define NAND_CACHEPRG 0x00000008
-/*
- * Chip requires ready check on read (for auto-incremented sequential read).
- * True only for small page devices; large page devices do not support
- * autoincrement.
- */
-#define NAND_NEED_READRDY 0x00000100
-
-/* Chip does not allow subpage writes */
-#define NAND_NO_SUBPAGE_WRITE 0x00000200
-
-/* Device is one of 'new' xD cards that expose fake nand command set */
-#define NAND_BROKEN_XD 0x00000400
-
-/* Device behaves just like nand, but is readonly */
-#define NAND_ROM 0x00000800
-
-/* Device supports subpage reads */
-#define NAND_SUBPAGE_READ 0x00001000
-
-/*
- * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
- * patterns.
- */
-#define NAND_NEED_SCRAMBLING 0x00002000
-
-/* Options valid for Samsung large page devices */
-#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
-
-/* Macros to identify the above */
-#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
-#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
-#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE)
-
-/* Non chip related options */
-/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN 0x00010000
-/*
- * This option is defined if the board driver allocates its own buffers
- * (e.g. because it needs them DMA-coherent).
- */
-#define NAND_OWN_BUFFERS 0x00020000
-/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV 0x00040000
-/*
- * Autodetect nand buswidth with readid/onfi.
- * This suppose the driver will configure the hardware in 8 bits mode
- * when calling nand_scan_ident, and update its configuration
- * before calling nand_scan_tail.
- */
-#define NAND_BUSWIDTH_AUTO 0x00080000
-/*
- * This option could be defined by controller drivers to protect against
- * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
- */
-#define NAND_USE_BOUNCE_BUFFER 0x00100000
-
-/*
- * In case your controller is implementing ->cmd_ctrl() and is relying on the
- * default ->cmdfunc() implementation, you may want to let the core handle the
- * tCCS delay which is required when a column change (RNDIN or RNDOUT) is
- * requested.
- * If your controller already takes care of this delay, you don't need to set
- * this flag.
- */
-#define NAND_WAIT_TCCS 0x00200000
-
-/* Options set by nand scan */
-/* Nand scan has allocated controller struct */
-#define NAND_CONTROLLER_ALLOC 0x80000000
-
-/* Cell info constants */
-#define NAND_CI_CHIPNR_MSK 0x03
-#define NAND_CI_CELLTYPE_MSK 0x0C
-#define NAND_CI_CELLTYPE_SHIFT 2
-
-/* Keep gcc happy */
-struct nand_chip;
-
-/* ONFI features */
-#define ONFI_FEATURE_16_BIT_BUS (1 << 0)
-#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7)
-
-/* ONFI timing mode, used in both asynchronous and synchronous mode */
-#define ONFI_TIMING_MODE_0 (1 << 0)
-#define ONFI_TIMING_MODE_1 (1 << 1)
-#define ONFI_TIMING_MODE_2 (1 << 2)
-#define ONFI_TIMING_MODE_3 (1 << 3)
-#define ONFI_TIMING_MODE_4 (1 << 4)
-#define ONFI_TIMING_MODE_5 (1 << 5)
-#define ONFI_TIMING_MODE_UNKNOWN (1 << 6)
-
-/* ONFI feature address */
-#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
-
-/* Vendor-specific feature address (Micron) */
-#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
-#define ONFI_FEATURE_ON_DIE_ECC 0x90
-#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
-
-/* ONFI subfeature parameters length */
-#define ONFI_SUBFEATURE_PARAM_LEN 4
-
-/* ONFI optional commands SET/GET FEATURES supported? */
-#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2)
-
-struct nand_onfi_params {
- /* rev info and features block */
- /* 'O' 'N' 'F' 'I' */
- u8 sig[4];
- __le16 revision;
- __le16 features;
- __le16 opt_cmd;
- u8 reserved0[2];
- __le16 ext_param_page_length; /* since ONFI 2.1 */
- u8 num_of_param_pages; /* since ONFI 2.1 */
- u8 reserved1[17];
-
- /* manufacturer information block */
- char manufacturer[12];
- char model[20];
- u8 jedec_id;
- __le16 date_code;
- u8 reserved2[13];
-
- /* memory organization block */
- __le32 byte_per_page;
- __le16 spare_bytes_per_page;
- __le32 data_bytes_per_ppage;
- __le16 spare_bytes_per_ppage;
- __le32 pages_per_block;
- __le32 blocks_per_lun;
- u8 lun_count;
- u8 addr_cycles;
- u8 bits_per_cell;
- __le16 bb_per_lun;
- __le16 block_endurance;
- u8 guaranteed_good_blocks;
- __le16 guaranteed_block_endurance;
- u8 programs_per_page;
- u8 ppage_attr;
- u8 ecc_bits;
- u8 interleaved_bits;
- u8 interleaved_ops;
- u8 reserved3[13];
-
- /* electrical parameter block */
- u8 io_pin_capacitance_max;
- __le16 async_timing_mode;
- __le16 program_cache_timing_mode;
- __le16 t_prog;
- __le16 t_bers;
- __le16 t_r;
- __le16 t_ccs;
- __le16 src_sync_timing_mode;
- u8 src_ssync_features;
- __le16 clk_pin_capacitance_typ;
- __le16 io_pin_capacitance_typ;
- __le16 input_pin_capacitance_typ;
- u8 input_pin_capacitance_max;
- u8 driver_strength_support;
- __le16 t_int_r;
- __le16 t_adl;
- u8 reserved4[8];
-
- /* vendor */
- __le16 vendor_revision;
- u8 vendor[88];
-
- __le16 crc;
-} __packed;
-
-#define ONFI_CRC_BASE 0x4F4E
-
-/* Extended ECC information Block Definition (since ONFI 2.1) */
-struct onfi_ext_ecc_info {
- u8 ecc_bits;
- u8 codeword_size;
- __le16 bb_per_lun;
- __le16 block_endurance;
- u8 reserved[2];
-} __packed;
-
-#define ONFI_SECTION_TYPE_0 0 /* Unused section. */
-#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */
-#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */
-struct onfi_ext_section {
- u8 type;
- u8 length;
-} __packed;
-
-#define ONFI_EXT_SECTION_MAX 8
-
-/* Extended Parameter Page Definition (since ONFI 2.1) */
-struct onfi_ext_param_page {
- __le16 crc;
- u8 sig[4]; /* 'E' 'P' 'P' 'S' */
- u8 reserved0[10];
- struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
-
- /*
- * The actual size of the Extended Parameter Page is in
- * @ext_param_page_length of nand_onfi_params{}.
- * The following are the variable length sections.
- * So we do not add any fields below. Please see the ONFI spec.
- */
-} __packed;
-
-struct jedec_ecc_info {
- u8 ecc_bits;
- u8 codeword_size;
- __le16 bb_per_lun;
- __le16 block_endurance;
- u8 reserved[2];
-} __packed;
-
-/* JEDEC features */
-#define JEDEC_FEATURE_16_BIT_BUS (1 << 0)
-
-struct nand_jedec_params {
- /* rev info and features block */
- /* 'J' 'E' 'S' 'D' */
- u8 sig[4];
- __le16 revision;
- __le16 features;
- u8 opt_cmd[3];
- __le16 sec_cmd;
- u8 num_of_param_pages;
- u8 reserved0[18];
-
- /* manufacturer information block */
- char manufacturer[12];
- char model[20];
- u8 jedec_id[6];
- u8 reserved1[10];
-
- /* memory organization block */
- __le32 byte_per_page;
- __le16 spare_bytes_per_page;
- u8 reserved2[6];
- __le32 pages_per_block;
- __le32 blocks_per_lun;
- u8 lun_count;
- u8 addr_cycles;
- u8 bits_per_cell;
- u8 programs_per_page;
- u8 multi_plane_addr;
- u8 multi_plane_op_attr;
- u8 reserved3[38];
-
- /* electrical parameter block */
- __le16 async_sdr_speed_grade;
- __le16 toggle_ddr_speed_grade;
- __le16 sync_ddr_speed_grade;
- u8 async_sdr_features;
- u8 toggle_ddr_features;
- u8 sync_ddr_features;
- __le16 t_prog;
- __le16 t_bers;
- __le16 t_r;
- __le16 t_r_multi_plane;
- __le16 t_ccs;
- __le16 io_pin_capacitance_typ;
- __le16 input_pin_capacitance_typ;
- __le16 clk_pin_capacitance_typ;
- u8 driver_strength_support;
- __le16 t_adl;
- u8 reserved4[36];
-
- /* ECC and endurance block */
- u8 guaranteed_good_blocks;
- __le16 guaranteed_block_endurance;
- struct jedec_ecc_info ecc_info[4];
- u8 reserved5[29];
-
- /* reserved */
- u8 reserved6[148];
-
- /* vendor */
- __le16 vendor_rev_num;
- u8 reserved7[88];
-
- /* CRC for Parameter Page */
- __le16 crc;
-} __packed;
-
-/**
- * struct nand_id - NAND id structure
- * @data: buffer containing the id bytes. Currently 8 bytes large, but can
- * be extended if required.
- * @len: ID length.
- */
-struct nand_id {
- u8 data[8];
- int len;
-};
-
-/**
- * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
- * @lock: protection lock
- * @active: the mtd device which holds the controller currently
- * @wq: wait queue to sleep on if a NAND operation is in
- * progress used instead of the per chip wait queue
- * when a hw controller is available.
- */
-struct nand_hw_control {
- spinlock_t lock;
- struct nand_chip *active;
- wait_queue_head_t wq;
-};
-
-static inline void nand_hw_control_init(struct nand_hw_control *nfc)
-{
- nfc->active = NULL;
- spin_lock_init(&nfc->lock);
- init_waitqueue_head(&nfc->wq);
-}
-
-/**
- * struct nand_ecc_step_info - ECC step information of ECC engine
- * @stepsize: data bytes per ECC step
- * @strengths: array of supported strengths
- * @nstrengths: number of supported strengths
- */
-struct nand_ecc_step_info {
- int stepsize;
- const int *strengths;
- int nstrengths;
-};
-
-/**
- * struct nand_ecc_caps - capability of ECC engine
- * @stepinfos: array of ECC step information
- * @nstepinfos: number of ECC step information
- * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
- */
-struct nand_ecc_caps {
- const struct nand_ecc_step_info *stepinfos;
- int nstepinfos;
- int (*calc_ecc_bytes)(int step_size, int strength);
-};
-
-/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
-#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
-static const int __name##_strengths[] = { __VA_ARGS__ }; \
-static const struct nand_ecc_step_info __name##_stepinfo = { \
- .stepsize = __step, \
- .strengths = __name##_strengths, \
- .nstrengths = ARRAY_SIZE(__name##_strengths), \
-}; \
-static const struct nand_ecc_caps __name = { \
- .stepinfos = &__name##_stepinfo, \
- .nstepinfos = 1, \
- .calc_ecc_bytes = __calc, \
-}
-
-/**
- * struct nand_ecc_ctrl - Control structure for ECC
- * @mode: ECC mode
- * @algo: ECC algorithm
- * @steps: number of ECC steps per page
- * @size: data bytes per ECC step
- * @bytes: ECC bytes per step
- * @strength: max number of correctible bits per ECC step
- * @total: total number of ECC bytes per page
- * @prepad: padding information for syndrome based ECC generators
- * @postpad: padding information for syndrome based ECC generators
- * @options: ECC specific options (see NAND_ECC_XXX flags defined above)
- * @priv: pointer to private ECC control data
- * @hwctl: function to control hardware ECC generator. Must only
- * be provided if an hardware ECC is available
- * @calculate: function for ECC calculation or readback from ECC hardware
- * @correct: function for ECC correction, matching to ECC generator (sw/hw).
- * Should return a positive number representing the number of
- * corrected bitflips, -EBADMSG if the number of bitflips exceed
- * ECC strength, or any other error code if the error is not
- * directly related to correction.
- * If -EBADMSG is returned the input buffers should be left
- * untouched.
- * @read_page_raw: function to read a raw page without ECC. This function
- * should hide the specific layout used by the ECC
- * controller and always return contiguous in-band and
- * out-of-band data even if they're not stored
- * contiguously on the NAND chip (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
- * out-of-band data).
- * @write_page_raw: function to write a raw page without ECC. This function
- * should hide the specific layout used by the ECC
- * controller and consider the passed data as contiguous
- * in-band and out-of-band data. ECC controller is
- * responsible for doing the appropriate transformations
- * to adapt to its specific layout (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
- * out-of-band data).
- * @read_page: function to read a page according to the ECC generator
- * requirements; returns maximum number of bitflips corrected in
- * any single ECC step, -EIO hw error
- * @read_subpage: function to read parts of the page covered by ECC;
- * returns same as read_page()
- * @write_subpage: function to write parts of the page covered by ECC.
- * @write_page: function to write a page according to the ECC generator
- * requirements.
- * @write_oob_raw: function to write chip OOB data without ECC
- * @read_oob_raw: function to read chip OOB data without ECC
- * @read_oob: function to read chip OOB data
- * @write_oob: function to write chip OOB data
- */
-struct nand_ecc_ctrl {
- nand_ecc_modes_t mode;
- enum nand_ecc_algo algo;
- int steps;
- int size;
- int bytes;
- int total;
- int strength;
- int prepad;
- int postpad;
- unsigned int options;
- void *priv;
- void (*hwctl)(struct mtd_info *mtd, int mode);
- int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
- uint8_t *ecc_code);
- int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
- uint8_t *calc_ecc);
- int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page);
- int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page);
- int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page);
- int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offs, uint32_t len, uint8_t *buf, int page);
- int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, uint32_t data_len,
- const uint8_t *data_buf, int oob_required, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page);
- int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- int page);
- int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- int page);
- int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
- int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
- int page);
-};
-
-static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc)
-{
- return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS);
-}
-
-/**
- * struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
- * @ecccode: buffer pointer for ECC read from flash, size is oobsize.
- * @databuf: buffer pointer for data, size is (page size + oobsize).
- *
- * Do not change the order of buffers. databuf and oobrbuf must be in
- * consecutive order.
- */
-struct nand_buffers {
- uint8_t *ecccalc;
- uint8_t *ecccode;
- uint8_t *databuf;
-};
-
-/**
- * struct nand_sdr_timings - SDR NAND chip timings
- *
- * This struct defines the timing requirements of a SDR NAND chip.
- * These information can be found in every NAND datasheets and the timings
- * meaning are described in the ONFI specifications:
- * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
- * Parameters)
- *
- * All these timings are expressed in picoseconds.
- *
- * @tBERS_max: Block erase time
- * @tCCS_min: Change column setup time
- * @tPROG_max: Page program time
- * @tR_max: Page read time
- * @tALH_min: ALE hold time
- * @tADL_min: ALE to data loading time
- * @tALS_min: ALE setup time
- * @tAR_min: ALE to RE# delay
- * @tCEA_max: CE# access time
- * @tCEH_min: CE# high hold time
- * @tCH_min: CE# hold time
- * @tCHZ_max: CE# high to output hi-Z
- * @tCLH_min: CLE hold time
- * @tCLR_min: CLE to RE# delay
- * @tCLS_min: CLE setup time
- * @tCOH_min: CE# high to output hold
- * @tCS_min: CE# setup time
- * @tDH_min: Data hold time
- * @tDS_min: Data setup time
- * @tFEAT_max: Busy time for Set Features and Get Features
- * @tIR_min: Output hi-Z to RE# low
- * @tITC_max: Interface and Timing Mode Change time
- * @tRC_min: RE# cycle time
- * @tREA_max: RE# access time
- * @tREH_min: RE# high hold time
- * @tRHOH_min: RE# high to output hold
- * @tRHW_min: RE# high to WE# low
- * @tRHZ_max: RE# high to output hi-Z
- * @tRLOH_min: RE# low to output hold
- * @tRP_min: RE# pulse width
- * @tRR_min: Ready to RE# low (data only)
- * @tRST_max: Device reset time, measured from the falling edge of R/B# to the
- * rising edge of R/B#.
- * @tWB_max: WE# high to SR[6] low
- * @tWC_min: WE# cycle time
- * @tWH_min: WE# high hold time
- * @tWHR_min: WE# high to RE# low
- * @tWP_min: WE# pulse width
- * @tWW_min: WP# transition to WE# low
- */
-struct nand_sdr_timings {
- u32 tBERS_max;
- u32 tCCS_min;
- u32 tPROG_max;
- u32 tR_max;
- u32 tALH_min;
- u32 tADL_min;
- u32 tALS_min;
- u32 tAR_min;
- u32 tCEA_max;
- u32 tCEH_min;
- u32 tCH_min;
- u32 tCHZ_max;
- u32 tCLH_min;
- u32 tCLR_min;
- u32 tCLS_min;
- u32 tCOH_min;
- u32 tCS_min;
- u32 tDH_min;
- u32 tDS_min;
- u32 tFEAT_max;
- u32 tIR_min;
- u32 tITC_max;
- u32 tRC_min;
- u32 tREA_max;
- u32 tREH_min;
- u32 tRHOH_min;
- u32 tRHW_min;
- u32 tRHZ_max;
- u32 tRLOH_min;
- u32 tRP_min;
- u32 tRR_min;
- u64 tRST_max;
- u32 tWB_max;
- u32 tWC_min;
- u32 tWH_min;
- u32 tWHR_min;
- u32 tWP_min;
- u32 tWW_min;
-};
-
-/**
- * enum nand_data_interface_type - NAND interface timing type
- * @NAND_SDR_IFACE: Single Data Rate interface
- */
-enum nand_data_interface_type {
- NAND_SDR_IFACE,
-};
-
-/**
- * struct nand_data_interface - NAND interface timing
- * @type: type of the timing
- * @timings: The timing, type according to @type
- */
-struct nand_data_interface {
- enum nand_data_interface_type type;
- union {
- struct nand_sdr_timings sdr;
- } timings;
-};
-
-/**
- * nand_get_sdr_timings - get SDR timing from data interface
- * @conf: The data interface
- */
-static inline const struct nand_sdr_timings *
-nand_get_sdr_timings(const struct nand_data_interface *conf)
-{
- if (conf->type != NAND_SDR_IFACE)
- return ERR_PTR(-EINVAL);
-
- return &conf->timings.sdr;
-}
-
-/**
- * struct nand_manufacturer_ops - NAND Manufacturer operations
- * @detect: detect the NAND memory organization and capabilities
- * @init: initialize all vendor specific fields (like the ->read_retry()
- * implementation) if any.
- * @cleanup: the ->init() function may have allocated resources, ->cleanup()
- * is here to let vendor specific code release those resources.
- */
-struct nand_manufacturer_ops {
- void (*detect)(struct nand_chip *chip);
- int (*init)(struct nand_chip *chip);
- void (*cleanup)(struct nand_chip *chip);
-};
-
-/**
- * struct nand_chip - NAND Private Flash Chip Data
- * @mtd: MTD device registered to the MTD framework
- * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
- * flash device
- * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
- * flash device.
- * @read_byte: [REPLACEABLE] read one byte from the chip
- * @read_word: [REPLACEABLE] read one word from the chip
- * @write_byte: [REPLACEABLE] write a single byte to the chip on the
- * low 8 I/O lines
- * @write_buf: [REPLACEABLE] write data from the buffer to the chip
- * @read_buf: [REPLACEABLE] read data from the chip into the buffer
- * @select_chip: [REPLACEABLE] select chip nr
- * @block_bad: [REPLACEABLE] check if a block is bad, using OOB markers
- * @block_markbad: [REPLACEABLE] mark a block bad
- * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
- * ALE/CLE/nCE. Also used to write command and address
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
- * device ready/busy line. If set to NULL no access to
- * ready/busy is available and the ready/busy information
- * is read from the chip status register.
- * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing
- * commands to the chip.
- * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
- * ready.
- * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for
- * setting the read-retry mode. Mostly needed for MLC NAND.
- * @ecc: [BOARDSPECIFIC] ECC control structure
- * @buffers: buffer structure for read/write
- * @buf_align: minimum buffer alignment required by a platform
- * @hwcontrol: platform-specific hardware control structure
- * @erase: [REPLACEABLE] erase function
- * @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
- * data from array to read regs (tR).
- * @state: [INTERN] the current state of the NAND device
- * @oob_poi: "poison value buffer," used for laying out OOB data
- * before writing
- * @page_shift: [INTERN] number of address bits in a page (column
- * address bits).
- * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
- * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
- * @chip_shift: [INTERN] number of address bits in one chip
- * @options: [BOARDSPECIFIC] various chip options. They can partly
- * be set to inform nand_scan about special functionality.
- * See the defines for further explanation.
- * @bbt_options: [INTERN] bad block specific options. All options used
- * here must come from bbm.h. By default, these options
- * will be copied to the appropriate nand_bbt_descr's.
- * @badblockpos: [INTERN] position of the bad block marker in the oob
- * area.
- * @badblockbits: [INTERN] minimum number of set bits in a good block's
- * bad block marker position; i.e., BBM == 11110111b is
- * not bad when badblockbits == 7
- * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC.
- * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
- * Minimum amount of bit errors per @ecc_step_ds guaranteed
- * to be correctable. If unknown, set to zero.
- * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
- * also from the datasheet. It is the recommended ECC step
- * size, if known; if unknown, set to zero.
- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
- * set to the actually used ONFI mode if the chip is
- * ONFI compliant or deduced from the datasheet if
- * the NAND chip is not ONFI compliant.
- * @numchips: [INTERN] number of physical chips
- * @chipsize: [INTERN] the size of one chip for multichip arrays
- * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf: [INTERN] holds the pagenumber which is currently in
- * data_buf.
- * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
- * currently in data_buf.
- * @subpagesize: [INTERN] holds the subpagesize
- * @id: [INTERN] holds NAND ID
- * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
- * non 0 if ONFI supported.
- * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
- * non 0 if JEDEC supported.
- * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
- * supported, 0 otherwise.
- * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is
- * supported, 0 otherwise.
- * @max_bb_per_die: [INTERN] the max number of bad blocks each die of a
- * this nand device will encounter their life times.
- * @blocks_per_die: [INTERN] The number of PEBs in a die
- * @data_interface: [INTERN] NAND interface timing information
- * @read_retries: [INTERN] the number of read retry modes supported
- * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
- * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
- * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
- * means the configuration should not be applied but
- * only checked.
- * @bbt: [INTERN] bad block table pointer
- * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
- * lookup.
- * @bbt_md: [REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
- * bad block scan.
- * @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independent
- * devices.
- * @priv: [OPTIONAL] pointer to private chip data
- * @manufacturer: [INTERN] Contains manufacturer information
- */
-
-struct nand_chip {
- struct mtd_info mtd;
- void __iomem *IO_ADDR_R;
- void __iomem *IO_ADDR_W;
-
- uint8_t (*read_byte)(struct mtd_info *mtd);
- u16 (*read_word)(struct mtd_info *mtd);
- void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
- int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
- int page_addr);
- int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
- int (*erase)(struct mtd_info *mtd, int page);
- int (*scan_bbt)(struct mtd_info *mtd);
- int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
- int feature_addr, uint8_t *subfeature_para);
- int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
- int feature_addr, uint8_t *subfeature_para);
- int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
- const struct nand_data_interface *conf);
-
-
- int chip_delay;
- unsigned int options;
- unsigned int bbt_options;
-
- int page_shift;
- int phys_erase_shift;
- int bbt_erase_shift;
- int chip_shift;
- int numchips;
- uint64_t chipsize;
- int pagemask;
- int pagebuf;
- unsigned int pagebuf_bitflips;
- int subpagesize;
- uint8_t bits_per_cell;
- uint16_t ecc_strength_ds;
- uint16_t ecc_step_ds;
- int onfi_timing_mode_default;
- int badblockpos;
- int badblockbits;
-
- struct nand_id id;
- int onfi_version;
- int jedec_version;
- union {
- struct nand_onfi_params onfi_params;
- struct nand_jedec_params jedec_params;
- };
- u16 max_bb_per_die;
- u32 blocks_per_die;
-
- struct nand_data_interface *data_interface;
-
- int read_retries;
-
- flstate_t state;
-
- uint8_t *oob_poi;
- struct nand_hw_control *controller;
-
- struct nand_ecc_ctrl ecc;
- struct nand_buffers *buffers;
- unsigned long buf_align;
- struct nand_hw_control hwcontrol;
-
- uint8_t *bbt;
- struct nand_bbt_descr *bbt_td;
- struct nand_bbt_descr *bbt_md;
-
- struct nand_bbt_descr *badblock_pattern;
-
- void *priv;
-
- struct {
- const struct nand_manufacturer *desc;
- void *priv;
- } manufacturer;
-};
-
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
-static inline void nand_set_flash_node(struct nand_chip *chip,
- struct device_node *np)
-{
- mtd_set_of_node(&chip->mtd, np);
-}
-
-static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
-{
- return mtd_get_of_node(&chip->mtd);
-}
-
-static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
-{
- return container_of(mtd, struct nand_chip, mtd);
-}
-
-static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
-{
- return &chip->mtd;
-}
-
-static inline void *nand_get_controller_data(struct nand_chip *chip)
-{
- return chip->priv;
-}
-
-static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
-{
- chip->priv = priv;
-}
-
-static inline void nand_set_manufacturer_data(struct nand_chip *chip,
- void *priv)
-{
- chip->manufacturer.priv = priv;
-}
-
-static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
-{
- return chip->manufacturer.priv;
-}
-
-/*
- * NAND Flash Manufacturer ID Codes
- */
-#define NAND_MFR_TOSHIBA 0x98
-#define NAND_MFR_ESMT 0xc8
-#define NAND_MFR_SAMSUNG 0xec
-#define NAND_MFR_FUJITSU 0x04
-#define NAND_MFR_NATIONAL 0x8f
-#define NAND_MFR_RENESAS 0x07
-#define NAND_MFR_STMICRO 0x20
-#define NAND_MFR_HYNIX 0xad
-#define NAND_MFR_MICRON 0x2c
-#define NAND_MFR_AMD 0x01
-#define NAND_MFR_MACRONIX 0xc2
-#define NAND_MFR_EON 0x92
-#define NAND_MFR_SANDISK 0x45
-#define NAND_MFR_INTEL 0x89
-#define NAND_MFR_ATO 0x9b
-#define NAND_MFR_WINBOND 0xef
-
-/* The maximum expected count of bytes in the NAND ID sequence */
-#define NAND_MAX_ID_LEN 8
-
-/*
- * A helper for defining older NAND chips where the second ID byte fully
- * defined the chip, including the geometry (chip size, eraseblock size, page
- * size). All these chips have 512 bytes NAND page size.
- */
-#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts) \
- { .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \
- .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) }
-
-/*
- * A helper for defining newer chips which report their page size and
- * eraseblock size via the extended ID bytes.
- *
- * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with
- * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the
- * device ID now only represented a particular total chip size (and voltage,
- * buswidth), and the page size, eraseblock size, and OOB size could vary while
- * using the same device ID.
- */
-#define EXTENDED_ID_NAND(nm, devid, chipsz, opts) \
- { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \
- .options = (opts) }
-
-#define NAND_ECC_INFO(_strength, _step) \
- { .strength_ds = (_strength), .step_ds = (_step) }
-#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds)
-#define NAND_ECC_STEP(type) ((type)->ecc.step_ds)
-
-/**
- * struct nand_flash_dev - NAND Flash Device ID Structure
- * @name: a human-readable name of the NAND chip
- * @dev_id: the device ID (the second byte of the full chip ID array)
- * @mfr_id: manufecturer ID part of the full chip ID array (refers the same
- * memory address as @id[0])
- * @dev_id: device ID part of the full chip ID array (refers the same memory
- * address as @id[1])
- * @id: full device ID array
- * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as
- * well as the eraseblock size) is determined from the extended NAND
- * chip ID array)
- * @chipsize: total chip size in MiB
- * @erasesize: eraseblock size in bytes (determined from the extended ID if 0)
- * @options: stores various chip bit options
- * @id_len: The valid length of the @id.
- * @oobsize: OOB size
- * @ecc: ECC correctability and step information from the datasheet.
- * @ecc.strength_ds: The ECC correctability from the datasheet, same as the
- * @ecc_strength_ds in nand_chip{}.
- * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
- * @ecc_step_ds in nand_chip{}, also from the datasheet.
- * For example, the "4bit ECC for each 512Byte" can be set with
- * NAND_ECC_INFO(4, 512).
- * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
- * reset. Should be deduced from timings described
- * in the datasheet.
- *
- */
-struct nand_flash_dev {
- char *name;
- union {
- struct {
- uint8_t mfr_id;
- uint8_t dev_id;
- };
- uint8_t id[NAND_MAX_ID_LEN];
- };
- unsigned int pagesize;
- unsigned int chipsize;
- unsigned int erasesize;
- unsigned int options;
- uint16_t id_len;
- uint16_t oobsize;
- struct {
- uint16_t strength_ds;
- uint16_t step_ds;
- } ecc;
- int onfi_timing_mode_default;
-};
-
-/**
- * struct nand_manufacturer - NAND Flash Manufacturer structure
- * @name: Manufacturer name
- * @id: manufacturer ID code of device.
- * @ops: manufacturer operations
-*/
-struct nand_manufacturer {
- int id;
- char *name;
- const struct nand_manufacturer_ops *ops;
-};
-
-const struct nand_manufacturer *nand_get_manufacturer(u8 id);
-
-static inline const char *
-nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
-{
- return manufacturer ? manufacturer->name : "Unknown";
-}
-
-extern struct nand_flash_dev nand_flash_ids[];
-
-extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
-extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
-extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
-extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
-extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
-extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
-
-int nand_default_bbt(struct mtd_info *mtd);
-int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
-int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
-int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
-int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
- int allowbbt);
-int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, uint8_t *buf);
-
-/**
- * struct platform_nand_chip - chip level device structure
- * @nr_chips: max. number of chips to scan for
- * @chip_offset: chip number offset
- * @nr_partitions: number of partitions pointed to by partitions (or zero)
- * @partitions: mtd partition list
- * @chip_delay: R/B delay value in us
- * @options: Option flags, e.g. 16bit buswidth
- * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @part_probe_types: NULL-terminated array of probe types
- */
-struct platform_nand_chip {
- int nr_chips;
- int chip_offset;
- int nr_partitions;
- struct mtd_partition *partitions;
- int chip_delay;
- unsigned int options;
- unsigned int bbt_options;
- const char **part_probe_types;
-};
-
-/* Keep gcc happy */
-struct platform_device;
-
-/**
- * struct platform_nand_ctrl - controller level device structure
- * @probe: platform specific function to probe/setup hardware
- * @remove: platform specific function to remove/teardown hardware
- * @hwcontrol: platform specific hardware control structure
- * @dev_ready: platform specific function to read ready/busy pin
- * @select_chip: platform specific chip select function
- * @cmd_ctrl: platform specific function for controlling
- * ALE/CLE/nCE. Also used to write command and address
- * @write_buf: platform specific function for write buffer
- * @read_buf: platform specific function for read buffer
- * @read_byte: platform specific function to read one byte from chip
- * @priv: private data to transport driver specific settings
- *
- * All fields are optional and depend on the hardware driver requirements
- */
-struct platform_nand_ctrl {
- int (*probe)(struct platform_device *pdev);
- void (*remove)(struct platform_device *pdev);
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*select_chip)(struct mtd_info *mtd, int chip);
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- unsigned char (*read_byte)(struct mtd_info *mtd);
- void *priv;
-};
-
-/**
- * struct platform_nand_data - container structure for platform-specific data
- * @chip: chip level chip structure
- * @ctrl: controller level device structure
- */
-struct platform_nand_data {
- struct platform_nand_chip chip;
- struct platform_nand_ctrl ctrl;
-};
-
-/* return the supported features. */
-static inline int onfi_feature(struct nand_chip *chip)
-{
- return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0;
-}
-
-/* return the supported asynchronous timing mode. */
-static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
-{
- if (!chip->onfi_version)
- return ONFI_TIMING_MODE_UNKNOWN;
- return le16_to_cpu(chip->onfi_params.async_timing_mode);
-}
-
-/* return the supported synchronous timing mode. */
-static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
-{
- if (!chip->onfi_version)
- return ONFI_TIMING_MODE_UNKNOWN;
- return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
-}
-
-int onfi_init_data_interface(struct nand_chip *chip,
- struct nand_data_interface *iface,
- enum nand_data_interface_type type,
- int timing_mode);
-
-/*
- * Check if it is a SLC nand.
- * The !nand_is_slc() can be used to check the MLC/TLC nand chips.
- * We do not distinguish the MLC and TLC now.
- */
-static inline bool nand_is_slc(struct nand_chip *chip)
-{
- return chip->bits_per_cell == 1;
-}
-
-/**
- * Check if the opcode's address should be sent only on the lower 8 bits
- * @command: opcode to check
- */
-static inline int nand_opcode_8bits(unsigned int command)
-{
- switch (command) {
- case NAND_CMD_READID:
- case NAND_CMD_PARAM:
- case NAND_CMD_GET_FEATURES:
- case NAND_CMD_SET_FEATURES:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-/* return the supported JEDEC features. */
-static inline int jedec_feature(struct nand_chip *chip)
-{
- return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
- : 0;
-}
-
-/* get timing characteristics from ONFI timing mode. */
-const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
-/* get data interface from ONFI timing mode 0, used after reset. */
-const struct nand_data_interface *nand_get_default_data_interface(void);
-
-int nand_check_erased_ecc_chunk(void *data, int datalen,
- void *ecc, int ecclen,
- void *extraoob, int extraooblen,
- int threshold);
-
-int nand_check_ecc_caps(struct nand_chip *chip,
- const struct nand_ecc_caps *caps, int oobavail);
-
-int nand_match_ecc_req(struct nand_chip *chip,
- const struct nand_ecc_caps *caps, int oobavail);
-
-int nand_maximize_ecc(struct nand_chip *chip,
- const struct nand_ecc_caps *caps, int oobavail);
-
-/* Default write_oob implementation */
-int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
-
-/* Default write_oob syndrome implementation */
-int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- int page);
-
-/* Default read_oob implementation */
-int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
-
-/* Default read_oob syndrome implementation */
-int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- int page);
-
-/* Stub used by drivers that do not support GET/SET FEATURES operations */
-int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
- struct nand_chip *chip, int addr,
- u8 *subfeature_param);
-
-/* Default read_page_raw implementation */
-int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page);
-
-/* Default write_page_raw implementation */
-int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page);
-
-/* Reset and initialize a NAND device */
-int nand_reset(struct nand_chip *chip, int chipnr);
-
-/* Free resources held by the NAND device */
-void nand_cleanup(struct nand_chip *chip);
-
-/* Default extended ID decoding function */
-void nand_decode_ext_id(struct nand_chip *chip);
-#endif /* __LINUX_MTD_NAND_H */
--- /dev/null
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains standard defines and IDs for NAND flash devices
+ *
+ * Changelog:
+ * See git changelog.
+ */
+#ifndef __LINUX_MTD_RAWNAND_H
+#define __LINUX_MTD_RAWNAND_H
+
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/bbm.h>
+
+struct mtd_info;
+struct nand_flash_dev;
+struct device_node;
+
+/* Scan and identify a NAND device */
+int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
+int nand_scan_ident(struct mtd_info *mtd, int max_chips,
+ struct nand_flash_dev *table);
+int nand_scan_tail(struct mtd_info *mtd);
+
+/* Unregister the MTD device and free resources held by the NAND device */
+void nand_release(struct mtd_info *mtd);
+
+/* Internal helper for board drivers which need to override command function */
+void nand_wait_ready(struct mtd_info *mtd);
+
+/* locks all blocks present in the device */
+int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* unlocks specified locked blocks */
+int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS 8
+
+/*
+ * Constants for hardware specific CLE/ALE/NCE function
+ *
+ * These are bits which can be or'ed to set/clear multiple
+ * bits in one go.
+ */
+/* Select the chip by setting nCE to low */
+#define NAND_NCE 0x01
+/* Select the command latch by setting CLE to high */
+#define NAND_CLE 0x02
+/* Select the address latch by setting ALE to high */
+#define NAND_ALE 0x04
+
+#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE)
+#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE)
+#define NAND_CTRL_CHANGE 0x80
+
+/*
+ * Standard NAND flash commands
+ */
+#define NAND_CMD_READ0 0
+#define NAND_CMD_READ1 1
+#define NAND_CMD_RNDOUT 5
+#define NAND_CMD_PAGEPROG 0x10
+#define NAND_CMD_READOOB 0x50
+#define NAND_CMD_ERASE1 0x60
+#define NAND_CMD_STATUS 0x70
+#define NAND_CMD_SEQIN 0x80
+#define NAND_CMD_RNDIN 0x85
+#define NAND_CMD_READID 0x90
+#define NAND_CMD_ERASE2 0xd0
+#define NAND_CMD_PARAM 0xec
+#define NAND_CMD_GET_FEATURES 0xee
+#define NAND_CMD_SET_FEATURES 0xef
+#define NAND_CMD_RESET 0xff
+
+#define NAND_CMD_LOCK 0x2a
+#define NAND_CMD_UNLOCK1 0x23
+#define NAND_CMD_UNLOCK2 0x24
+
+/* Extended commands for large page devices */
+#define NAND_CMD_READSTART 0x30
+#define NAND_CMD_RNDOUTSTART 0xE0
+#define NAND_CMD_CACHEDPROG 0x15
+
+#define NAND_CMD_NONE -1
+
+/* Status bits */
+#define NAND_STATUS_FAIL 0x01
+#define NAND_STATUS_FAIL_N1 0x02
+#define NAND_STATUS_TRUE_READY 0x20
+#define NAND_STATUS_READY 0x40
+#define NAND_STATUS_WP 0x80
+
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
+/*
+ * Constants for ECC_MODES
+ */
+typedef enum {
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+ NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_ON_DIE,
+} nand_ecc_modes_t;
+
+enum nand_ecc_algo {
+ NAND_ECC_UNKNOWN,
+ NAND_ECC_HAMMING,
+ NAND_ECC_BCH,
+};
+
+/*
+ * Constants for Hardware ECC
+ */
+/* Reset Hardware ECC for read */
+#define NAND_ECC_READ 0
+/* Reset Hardware ECC for write */
+#define NAND_ECC_WRITE 1
+/* Enable Hardware ECC before syndrome is read back from flash */
+#define NAND_ECC_READSYN 2
+
+/*
+ * Enable generic NAND 'page erased' check. This check is only done when
+ * ecc.correct() returns -EBADMSG.
+ * Set this flag if your implementation does not fix bitflips in erased
+ * pages and you want to rely on the default implementation.
+ */
+#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
+#define NAND_ECC_MAXIMIZE BIT(1)
+/*
+ * If your controller already sends the required NAND commands when
+ * reading or writing a page, then the framework is not supposed to
+ * send READ0 and SEQIN/PAGEPROG respectively.
+ */
+#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2)
+
+/* Bit mask for flags passed to do_nand_read_ecc */
+#define NAND_GET_DEVICE 0x80
+
+
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
+/* Buswidth is 16 bit */
+#define NAND_BUSWIDTH_16 0x00000002
+/* Chip has cache program function */
+#define NAND_CACHEPRG 0x00000008
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
+/* Chip does not allow subpage writes */
+#define NAND_NO_SUBPAGE_WRITE 0x00000200
+
+/* Device is one of 'new' xD cards that expose fake nand command set */
+#define NAND_BROKEN_XD 0x00000400
+
+/* Device behaves just like nand, but is readonly */
+#define NAND_ROM 0x00000800
+
+/* Device supports subpage reads */
+#define NAND_SUBPAGE_READ 0x00001000
+
+/*
+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
+ * patterns.
+ */
+#define NAND_NEED_SCRAMBLING 0x00002000
+
+/* Options valid for Samsung large page devices */
+#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
+
+/* Macros to identify the above */
+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
+#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
+#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE)
+
+/* Non chip related options */
+/* This option skips the bbt scan during initialization. */
+#define NAND_SKIP_BBTSCAN 0x00010000
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
+#define NAND_OWN_BUFFERS 0x00020000
+/* Chip may not exist, so silence any errors in scan */
+#define NAND_SCAN_SILENT_NODEV 0x00040000
+/*
+ * Autodetect nand buswidth with readid/onfi.
+ * This suppose the driver will configure the hardware in 8 bits mode
+ * when calling nand_scan_ident, and update its configuration
+ * before calling nand_scan_tail.
+ */
+#define NAND_BUSWIDTH_AUTO 0x00080000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER 0x00100000
+
+/*
+ * In case your controller is implementing ->cmd_ctrl() and is relying on the
+ * default ->cmdfunc() implementation, you may want to let the core handle the
+ * tCCS delay which is required when a column change (RNDIN or RNDOUT) is
+ * requested.
+ * If your controller already takes care of this delay, you don't need to set
+ * this flag.
+ */
+#define NAND_WAIT_TCCS 0x00200000
+
+/* Options set by nand scan */
+/* Nand scan has allocated controller struct */
+#define NAND_CONTROLLER_ALLOC 0x80000000
+
+/* Cell info constants */
+#define NAND_CI_CHIPNR_MSK 0x03
+#define NAND_CI_CELLTYPE_MSK 0x0C
+#define NAND_CI_CELLTYPE_SHIFT 2
+
+/* Keep gcc happy */
+struct nand_chip;
+
+/* ONFI features */
+#define ONFI_FEATURE_16_BIT_BUS (1 << 0)
+#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7)
+
+/* ONFI timing mode, used in both asynchronous and synchronous mode */
+#define ONFI_TIMING_MODE_0 (1 << 0)
+#define ONFI_TIMING_MODE_1 (1 << 1)
+#define ONFI_TIMING_MODE_2 (1 << 2)
+#define ONFI_TIMING_MODE_3 (1 << 3)
+#define ONFI_TIMING_MODE_4 (1 << 4)
+#define ONFI_TIMING_MODE_5 (1 << 5)
+#define ONFI_TIMING_MODE_UNKNOWN (1 << 6)
+
+/* ONFI feature address */
+#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
+
+/* Vendor-specific feature address (Micron) */
+#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
+
+/* ONFI subfeature parameters length */
+#define ONFI_SUBFEATURE_PARAM_LEN 4
+
+/* ONFI optional commands SET/GET FEATURES supported? */
+#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2)
+
+struct nand_onfi_params {
+ /* rev info and features block */
+ /* 'O' 'N' 'F' 'I' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ __le16 opt_cmd;
+ u8 reserved0[2];
+ __le16 ext_param_page_length; /* since ONFI 2.1 */
+ u8 num_of_param_pages; /* since ONFI 2.1 */
+ u8 reserved1[17];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id;
+ __le16 date_code;
+ u8 reserved2[13];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ __le32 data_bytes_per_ppage;
+ __le16 spare_bytes_per_ppage;
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ u8 programs_per_page;
+ u8 ppage_attr;
+ u8 ecc_bits;
+ u8 interleaved_bits;
+ u8 interleaved_ops;
+ u8 reserved3[13];
+
+ /* electrical parameter block */
+ u8 io_pin_capacitance_max;
+ __le16 async_timing_mode;
+ __le16 program_cache_timing_mode;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+ u8 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strength_support;
+ __le16 t_int_r;
+ __le16 t_adl;
+ u8 reserved4[8];
+
+ /* vendor */
+ __le16 vendor_revision;
+ u8 vendor[88];
+
+ __le16 crc;
+} __packed;
+
+#define ONFI_CRC_BASE 0x4F4E
+
+/* Extended ECC information Block Definition (since ONFI 2.1) */
+struct onfi_ext_ecc_info {
+ u8 ecc_bits;
+ u8 codeword_size;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 reserved[2];
+} __packed;
+
+#define ONFI_SECTION_TYPE_0 0 /* Unused section. */
+#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */
+#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */
+struct onfi_ext_section {
+ u8 type;
+ u8 length;
+} __packed;
+
+#define ONFI_EXT_SECTION_MAX 8
+
+/* Extended Parameter Page Definition (since ONFI 2.1) */
+struct onfi_ext_param_page {
+ __le16 crc;
+ u8 sig[4]; /* 'E' 'P' 'P' 'S' */
+ u8 reserved0[10];
+ struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
+
+ /*
+ * The actual size of the Extended Parameter Page is in
+ * @ext_param_page_length of nand_onfi_params{}.
+ * The following are the variable length sections.
+ * So we do not add any fields below. Please see the ONFI spec.
+ */
+} __packed;
+
+struct jedec_ecc_info {
+ u8 ecc_bits;
+ u8 codeword_size;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS (1 << 0)
+
+struct nand_jedec_params {
+ /* rev info and features block */
+ /* 'J' 'E' 'S' 'D' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ u8 opt_cmd[3];
+ __le16 sec_cmd;
+ u8 num_of_param_pages;
+ u8 reserved0[18];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id[6];
+ u8 reserved1[10];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ u8 reserved2[6];
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ u8 programs_per_page;
+ u8 multi_plane_addr;
+ u8 multi_plane_op_attr;
+ u8 reserved3[38];
+
+ /* electrical parameter block */
+ __le16 async_sdr_speed_grade;
+ __le16 toggle_ddr_speed_grade;
+ __le16 sync_ddr_speed_grade;
+ u8 async_sdr_features;
+ u8 toggle_ddr_features;
+ u8 sync_ddr_features;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_r_multi_plane;
+ __le16 t_ccs;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ __le16 clk_pin_capacitance_typ;
+ u8 driver_strength_support;
+ __le16 t_adl;
+ u8 reserved4[36];
+
+ /* ECC and endurance block */
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ struct jedec_ecc_info ecc_info[4];
+ u8 reserved5[29];
+
+ /* reserved */
+ u8 reserved6[148];
+
+ /* vendor */
+ __le16 vendor_rev_num;
+ u8 reserved7[88];
+
+ /* CRC for Parameter Page */
+ __le16 crc;
+} __packed;
+
+/**
+ * struct nand_id - NAND id structure
+ * @data: buffer containing the id bytes. Currently 8 bytes large, but can
+ * be extended if required.
+ * @len: ID length.
+ */
+struct nand_id {
+ u8 data[8];
+ int len;
+};
+
+/**
+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
+ * @lock: protection lock
+ * @active: the mtd device which holds the controller currently
+ * @wq: wait queue to sleep on if a NAND operation is in
+ * progress used instead of the per chip wait queue
+ * when a hw controller is available.
+ */
+struct nand_hw_control {
+ spinlock_t lock;
+ struct nand_chip *active;
+ wait_queue_head_t wq;
+};
+
+static inline void nand_hw_control_init(struct nand_hw_control *nfc)
+{
+ nfc->active = NULL;
+ spin_lock_init(&nfc->lock);
+ init_waitqueue_head(&nfc->wq);
+}
+
+/**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+ int stepsize;
+ const int *strengths;
+ int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+ const struct nand_ecc_step_info *stepinfos;
+ int nstepinfos;
+ int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
+static const int __name##_strengths[] = { __VA_ARGS__ }; \
+static const struct nand_ecc_step_info __name##_stepinfo = { \
+ .stepsize = __step, \
+ .strengths = __name##_strengths, \
+ .nstrengths = ARRAY_SIZE(__name##_strengths), \
+}; \
+static const struct nand_ecc_caps __name = { \
+ .stepinfos = &__name##_stepinfo, \
+ .nstepinfos = 1, \
+ .calc_ecc_bytes = __calc, \
+}
+
+/**
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @algo: ECC algorithm
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @strength: max number of correctible bits per ECC step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
+ * @options: ECC specific options (see NAND_ECC_XXX flags defined above)
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
+ * be provided if an hardware ECC is available
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw).
+ * Should return a positive number representing the number of
+ * corrected bitflips, -EBADMSG if the number of bitflips exceed
+ * ECC strength, or any other error code if the error is not
+ * directly related to correction.
+ * If -EBADMSG is returned the input buffers should be left
+ * untouched.
+ * @read_page_raw: function to read a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and always return contiguous in-band and
+ * out-of-band data even if they're not stored
+ * contiguously on the NAND chip (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
+ * @write_page_raw: function to write a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and consider the passed data as contiguous
+ * in-band and out-of-band data. ECC controller is
+ * responsible for doing the appropriate transformations
+ * to adapt to its specific layout (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
+ * @read_page: function to read a page according to the ECC generator
+ * requirements; returns maximum number of bitflips corrected in
+ * any single ECC step, -EIO hw error
+ * @read_subpage: function to read parts of the page covered by ECC;
+ * returns same as read_page()
+ * @write_subpage: function to write parts of the page covered by ECC.
+ * @write_page: function to write a page according to the ECC generator
+ * requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
+ * @read_oob: function to read chip OOB data
+ * @write_oob: function to write chip OOB data
+ */
+struct nand_ecc_ctrl {
+ nand_ecc_modes_t mode;
+ enum nand_ecc_algo algo;
+ int steps;
+ int size;
+ int bytes;
+ int total;
+ int strength;
+ int prepad;
+ int postpad;
+ unsigned int options;
+ void *priv;
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code);
+ int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
+ uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+ int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+ int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf, int page);
+ int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, uint32_t data_len,
+ const uint8_t *data_buf, int oob_required, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
+ int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+};
+
+static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc)
+{
+ return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS);
+}
+
+/**
+ * struct nand_buffers - buffer structure for read/write
+ * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
+ * @ecccode: buffer pointer for ECC read from flash, size is oobsize.
+ * @databuf: buffer pointer for data, size is (page size + oobsize).
+ *
+ * Do not change the order of buffers. databuf and oobrbuf must be in
+ * consecutive order.
+ */
+struct nand_buffers {
+ uint8_t *ecccalc;
+ uint8_t *ecccode;
+ uint8_t *databuf;
+};
+
+/**
+ * struct nand_sdr_timings - SDR NAND chip timings
+ *
+ * This struct defines the timing requirements of a SDR NAND chip.
+ * These information can be found in every NAND datasheets and the timings
+ * meaning are described in the ONFI specifications:
+ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
+ * Parameters)
+ *
+ * All these timings are expressed in picoseconds.
+ *
+ * @tBERS_max: Block erase time
+ * @tCCS_min: Change column setup time
+ * @tPROG_max: Page program time
+ * @tR_max: Page read time
+ * @tALH_min: ALE hold time
+ * @tADL_min: ALE to data loading time
+ * @tALS_min: ALE setup time
+ * @tAR_min: ALE to RE# delay
+ * @tCEA_max: CE# access time
+ * @tCEH_min: CE# high hold time
+ * @tCH_min: CE# hold time
+ * @tCHZ_max: CE# high to output hi-Z
+ * @tCLH_min: CLE hold time
+ * @tCLR_min: CLE to RE# delay
+ * @tCLS_min: CLE setup time
+ * @tCOH_min: CE# high to output hold
+ * @tCS_min: CE# setup time
+ * @tDH_min: Data hold time
+ * @tDS_min: Data setup time
+ * @tFEAT_max: Busy time for Set Features and Get Features
+ * @tIR_min: Output hi-Z to RE# low
+ * @tITC_max: Interface and Timing Mode Change time
+ * @tRC_min: RE# cycle time
+ * @tREA_max: RE# access time
+ * @tREH_min: RE# high hold time
+ * @tRHOH_min: RE# high to output hold
+ * @tRHW_min: RE# high to WE# low
+ * @tRHZ_max: RE# high to output hi-Z
+ * @tRLOH_min: RE# low to output hold
+ * @tRP_min: RE# pulse width
+ * @tRR_min: Ready to RE# low (data only)
+ * @tRST_max: Device reset time, measured from the falling edge of R/B# to the
+ * rising edge of R/B#.
+ * @tWB_max: WE# high to SR[6] low
+ * @tWC_min: WE# cycle time
+ * @tWH_min: WE# high hold time
+ * @tWHR_min: WE# high to RE# low
+ * @tWP_min: WE# pulse width
+ * @tWW_min: WP# transition to WE# low
+ */
+struct nand_sdr_timings {
+ u32 tBERS_max;
+ u32 tCCS_min;
+ u32 tPROG_max;
+ u32 tR_max;
+ u32 tALH_min;
+ u32 tADL_min;
+ u32 tALS_min;
+ u32 tAR_min;
+ u32 tCEA_max;
+ u32 tCEH_min;
+ u32 tCH_min;
+ u32 tCHZ_max;
+ u32 tCLH_min;
+ u32 tCLR_min;
+ u32 tCLS_min;
+ u32 tCOH_min;
+ u32 tCS_min;
+ u32 tDH_min;
+ u32 tDS_min;
+ u32 tFEAT_max;
+ u32 tIR_min;
+ u32 tITC_max;
+ u32 tRC_min;
+ u32 tREA_max;
+ u32 tREH_min;
+ u32 tRHOH_min;
+ u32 tRHW_min;
+ u32 tRHZ_max;
+ u32 tRLOH_min;
+ u32 tRP_min;
+ u32 tRR_min;
+ u64 tRST_max;
+ u32 tWB_max;
+ u32 tWC_min;
+ u32 tWH_min;
+ u32 tWHR_min;
+ u32 tWP_min;
+ u32 tWW_min;
+};
+
+/**
+ * enum nand_data_interface_type - NAND interface timing type
+ * @NAND_SDR_IFACE: Single Data Rate interface
+ */
+enum nand_data_interface_type {
+ NAND_SDR_IFACE,
+};
+
+/**
+ * struct nand_data_interface - NAND interface timing
+ * @type: type of the timing
+ * @timings: The timing, type according to @type
+ */
+struct nand_data_interface {
+ enum nand_data_interface_type type;
+ union {
+ struct nand_sdr_timings sdr;
+ } timings;
+};
+
+/**
+ * nand_get_sdr_timings - get SDR timing from data interface
+ * @conf: The data interface
+ */
+static inline const struct nand_sdr_timings *
+nand_get_sdr_timings(const struct nand_data_interface *conf)
+{
+ if (conf->type != NAND_SDR_IFACE)
+ return ERR_PTR(-EINVAL);
+
+ return &conf->timings.sdr;
+}
+
+/**
+ * struct nand_manufacturer_ops - NAND Manufacturer operations
+ * @detect: detect the NAND memory organization and capabilities
+ * @init: initialize all vendor specific fields (like the ->read_retry()
+ * implementation) if any.
+ * @cleanup: the ->init() function may have allocated resources, ->cleanup()
+ * is here to let vendor specific code release those resources.
+ */
+struct nand_manufacturer_ops {
+ void (*detect)(struct nand_chip *chip);
+ int (*init)(struct nand_chip *chip);
+ void (*cleanup)(struct nand_chip *chip);
+};
+
+/**
+ * struct nand_chip - NAND Private Flash Chip Data
+ * @mtd: MTD device registered to the MTD framework
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
+ * flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
+ * flash device.
+ * @read_byte: [REPLACEABLE] read one byte from the chip
+ * @read_word: [REPLACEABLE] read one word from the chip
+ * @write_byte: [REPLACEABLE] write a single byte to the chip on the
+ * low 8 I/O lines
+ * @write_buf: [REPLACEABLE] write data from the buffer to the chip
+ * @read_buf: [REPLACEABLE] read data from the chip into the buffer
+ * @select_chip: [REPLACEABLE] select chip nr
+ * @block_bad: [REPLACEABLE] check if a block is bad, using OOB markers
+ * @block_markbad: [REPLACEABLE] mark a block bad
+ * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
+ * ALE/CLE/nCE. Also used to write command and address
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
+ * device ready/busy line. If set to NULL no access to
+ * ready/busy is available and the ready/busy information
+ * is read from the chip status register.
+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing
+ * commands to the chip.
+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
+ * ready.
+ * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for
+ * setting the read-retry mode. Mostly needed for MLC NAND.
+ * @ecc: [BOARDSPECIFIC] ECC control structure
+ * @buffers: buffer structure for read/write
+ * @buf_align: minimum buffer alignment required by a platform
+ * @hwcontrol: platform-specific hardware control structure
+ * @erase: [REPLACEABLE] erase function
+ * @scan_bbt: [REPLACEABLE] function to scan bad block table
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
+ * data from array to read regs (tR).
+ * @state: [INTERN] the current state of the NAND device
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
+ * @page_shift: [INTERN] number of address bits in a page (column
+ * address bits).
+ * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
+ * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
+ * @chip_shift: [INTERN] number of address bits in one chip
+ * @options: [BOARDSPECIFIC] various chip options. They can partly
+ * be set to inform nand_scan about special functionality.
+ * See the defines for further explanation.
+ * @bbt_options: [INTERN] bad block specific options. All options used
+ * here must come from bbm.h. By default, these options
+ * will be copied to the appropriate nand_bbt_descr's.
+ * @badblockpos: [INTERN] position of the bad block marker in the oob
+ * area.
+ * @badblockbits: [INTERN] minimum number of set bits in a good block's
+ * bad block marker position; i.e., BBM == 11110111b is
+ * not bad when badblockbits == 7
+ * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC.
+ * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
+ * Minimum amount of bit errors per @ecc_step_ds guaranteed
+ * to be correctable. If unknown, set to zero.
+ * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
+ * also from the datasheet. It is the recommended ECC step
+ * size, if known; if unknown, set to zero.
+ * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
+ * set to the actually used ONFI mode if the chip is
+ * ONFI compliant or deduced from the datasheet if
+ * the NAND chip is not ONFI compliant.
+ * @numchips: [INTERN] number of physical chips
+ * @chipsize: [INTERN] the size of one chip for multichip arrays
+ * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
+ * @pagebuf: [INTERN] holds the pagenumber which is currently in
+ * data_buf.
+ * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
+ * currently in data_buf.
+ * @subpagesize: [INTERN] holds the subpagesize
+ * @id: [INTERN] holds NAND ID
+ * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
+ * non 0 if ONFI supported.
+ * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
+ * non 0 if JEDEC supported.
+ * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
+ * supported, 0 otherwise.
+ * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is
+ * supported, 0 otherwise.
+ * @max_bb_per_die: [INTERN] the max number of bad blocks each die of a
+ * this nand device will encounter their life times.
+ * @blocks_per_die: [INTERN] The number of PEBs in a die
+ * @data_interface: [INTERN] NAND interface timing information
+ * @read_retries: [INTERN] the number of read retry modes supported
+ * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
+ * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
+ * @bbt: [INTERN] bad block table pointer
+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash
+ * lookup.
+ * @bbt_md: [REPLACEABLE] bad block table mirror descriptor
+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
+ * bad block scan.
+ * @controller: [REPLACEABLE] a pointer to a hardware controller
+ * structure which is shared among multiple independent
+ * devices.
+ * @priv: [OPTIONAL] pointer to private chip data
+ * @manufacturer: [INTERN] Contains manufacturer information
+ */
+
+struct nand_chip {
+ struct mtd_info mtd;
+ void __iomem *IO_ADDR_R;
+ void __iomem *IO_ADDR_W;
+
+ uint8_t (*read_byte)(struct mtd_info *mtd);
+ u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr);
+ int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+ int (*erase)(struct mtd_info *mtd, int page);
+ int (*scan_bbt)(struct mtd_info *mtd);
+ int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
+ int feature_addr, uint8_t *subfeature_para);
+ int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
+ int feature_addr, uint8_t *subfeature_para);
+ int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
+
+
+ int chip_delay;
+ unsigned int options;
+ unsigned int bbt_options;
+
+ int page_shift;
+ int phys_erase_shift;
+ int bbt_erase_shift;
+ int chip_shift;
+ int numchips;
+ uint64_t chipsize;
+ int pagemask;
+ int pagebuf;
+ unsigned int pagebuf_bitflips;
+ int subpagesize;
+ uint8_t bits_per_cell;
+ uint16_t ecc_strength_ds;
+ uint16_t ecc_step_ds;
+ int onfi_timing_mode_default;
+ int badblockpos;
+ int badblockbits;
+
+ struct nand_id id;
+ int onfi_version;
+ int jedec_version;
+ union {
+ struct nand_onfi_params onfi_params;
+ struct nand_jedec_params jedec_params;
+ };
+ u16 max_bb_per_die;
+ u32 blocks_per_die;
+
+ struct nand_data_interface *data_interface;
+
+ int read_retries;
+
+ flstate_t state;
+
+ uint8_t *oob_poi;
+ struct nand_hw_control *controller;
+
+ struct nand_ecc_ctrl ecc;
+ struct nand_buffers *buffers;
+ unsigned long buf_align;
+ struct nand_hw_control hwcontrol;
+
+ uint8_t *bbt;
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
+
+ struct nand_bbt_descr *badblock_pattern;
+
+ void *priv;
+
+ struct {
+ const struct nand_manufacturer *desc;
+ void *priv;
+ } manufacturer;
+};
+
+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
+
+static inline void nand_set_flash_node(struct nand_chip *chip,
+ struct device_node *np)
+{
+ mtd_set_of_node(&chip->mtd, np);
+}
+
+static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
+{
+ return mtd_get_of_node(&chip->mtd);
+}
+
+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct nand_chip, mtd);
+}
+
+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
+{
+ return &chip->mtd;
+}
+
+static inline void *nand_get_controller_data(struct nand_chip *chip)
+{
+ return chip->priv;
+}
+
+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
+{
+ chip->priv = priv;
+}
+
+static inline void nand_set_manufacturer_data(struct nand_chip *chip,
+ void *priv)
+{
+ chip->manufacturer.priv = priv;
+}
+
+static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
+{
+ return chip->manufacturer.priv;
+}
+
+/*
+ * NAND Flash Manufacturer ID Codes
+ */
+#define NAND_MFR_TOSHIBA 0x98
+#define NAND_MFR_ESMT 0xc8
+#define NAND_MFR_SAMSUNG 0xec
+#define NAND_MFR_FUJITSU 0x04
+#define NAND_MFR_NATIONAL 0x8f
+#define NAND_MFR_RENESAS 0x07
+#define NAND_MFR_STMICRO 0x20
+#define NAND_MFR_HYNIX 0xad
+#define NAND_MFR_MICRON 0x2c
+#define NAND_MFR_AMD 0x01
+#define NAND_MFR_MACRONIX 0xc2
+#define NAND_MFR_EON 0x92
+#define NAND_MFR_SANDISK 0x45
+#define NAND_MFR_INTEL 0x89
+#define NAND_MFR_ATO 0x9b
+#define NAND_MFR_WINBOND 0xef
+
+/* The maximum expected count of bytes in the NAND ID sequence */
+#define NAND_MAX_ID_LEN 8
+
+/*
+ * A helper for defining older NAND chips where the second ID byte fully
+ * defined the chip, including the geometry (chip size, eraseblock size, page
+ * size). All these chips have 512 bytes NAND page size.
+ */
+#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts) \
+ { .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \
+ .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) }
+
+/*
+ * A helper for defining newer chips which report their page size and
+ * eraseblock size via the extended ID bytes.
+ *
+ * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with
+ * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the
+ * device ID now only represented a particular total chip size (and voltage,
+ * buswidth), and the page size, eraseblock size, and OOB size could vary while
+ * using the same device ID.
+ */
+#define EXTENDED_ID_NAND(nm, devid, chipsz, opts) \
+ { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \
+ .options = (opts) }
+
+#define NAND_ECC_INFO(_strength, _step) \
+ { .strength_ds = (_strength), .step_ds = (_step) }
+#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds)
+#define NAND_ECC_STEP(type) ((type)->ecc.step_ds)
+
+/**
+ * struct nand_flash_dev - NAND Flash Device ID Structure
+ * @name: a human-readable name of the NAND chip
+ * @dev_id: the device ID (the second byte of the full chip ID array)
+ * @mfr_id: manufecturer ID part of the full chip ID array (refers the same
+ * memory address as @id[0])
+ * @dev_id: device ID part of the full chip ID array (refers the same memory
+ * address as @id[1])
+ * @id: full device ID array
+ * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as
+ * well as the eraseblock size) is determined from the extended NAND
+ * chip ID array)
+ * @chipsize: total chip size in MiB
+ * @erasesize: eraseblock size in bytes (determined from the extended ID if 0)
+ * @options: stores various chip bit options
+ * @id_len: The valid length of the @id.
+ * @oobsize: OOB size
+ * @ecc: ECC correctability and step information from the datasheet.
+ * @ecc.strength_ds: The ECC correctability from the datasheet, same as the
+ * @ecc_strength_ds in nand_chip{}.
+ * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
+ * @ecc_step_ds in nand_chip{}, also from the datasheet.
+ * For example, the "4bit ECC for each 512Byte" can be set with
+ * NAND_ECC_INFO(4, 512).
+ * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
+ * reset. Should be deduced from timings described
+ * in the datasheet.
+ *
+ */
+struct nand_flash_dev {
+ char *name;
+ union {
+ struct {
+ uint8_t mfr_id;
+ uint8_t dev_id;
+ };
+ uint8_t id[NAND_MAX_ID_LEN];
+ };
+ unsigned int pagesize;
+ unsigned int chipsize;
+ unsigned int erasesize;
+ unsigned int options;
+ uint16_t id_len;
+ uint16_t oobsize;
+ struct {
+ uint16_t strength_ds;
+ uint16_t step_ds;
+ } ecc;
+ int onfi_timing_mode_default;
+};
+
+/**
+ * struct nand_manufacturer - NAND Flash Manufacturer structure
+ * @name: Manufacturer name
+ * @id: manufacturer ID code of device.
+ * @ops: manufacturer operations
+*/
+struct nand_manufacturer {
+ int id;
+ char *name;
+ const struct nand_manufacturer_ops *ops;
+};
+
+const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+
+static inline const char *
+nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
+{
+ return manufacturer ? manufacturer->name : "Unknown";
+}
+
+extern struct nand_flash_dev nand_flash_ids[];
+
+extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
+extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
+extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
+extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
+extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
+
+int nand_default_bbt(struct mtd_info *mtd);
+int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
+int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
+int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
+int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt);
+int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf);
+
+/**
+ * struct platform_nand_chip - chip level device structure
+ * @nr_chips: max. number of chips to scan for
+ * @chip_offset: chip number offset
+ * @nr_partitions: number of partitions pointed to by partitions (or zero)
+ * @partitions: mtd partition list
+ * @chip_delay: R/B delay value in us
+ * @options: Option flags, e.g. 16bit buswidth
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @part_probe_types: NULL-terminated array of probe types
+ */
+struct platform_nand_chip {
+ int nr_chips;
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+ int chip_delay;
+ unsigned int options;
+ unsigned int bbt_options;
+ const char **part_probe_types;
+};
+
+/* Keep gcc happy */
+struct platform_device;
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ * @probe: platform specific function to probe/setup hardware
+ * @remove: platform specific function to remove/teardown hardware
+ * @hwcontrol: platform specific hardware control structure
+ * @dev_ready: platform specific function to read ready/busy pin
+ * @select_chip: platform specific chip select function
+ * @cmd_ctrl: platform specific function for controlling
+ * ALE/CLE/nCE. Also used to write command and address
+ * @write_buf: platform specific function for write buffer
+ * @read_buf: platform specific function for read buffer
+ * @read_byte: platform specific function to read one byte from chip
+ * @priv: private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+ int (*probe)(struct platform_device *pdev);
+ void (*remove)(struct platform_device *pdev);
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ unsigned char (*read_byte)(struct mtd_info *mtd);
+ void *priv;
+};
+
+/**
+ * struct platform_nand_data - container structure for platform-specific data
+ * @chip: chip level chip structure
+ * @ctrl: controller level device structure
+ */
+struct platform_nand_data {
+ struct platform_nand_chip chip;
+ struct platform_nand_ctrl ctrl;
+};
+
+/* return the supported features. */
+static inline int onfi_feature(struct nand_chip *chip)
+{
+ return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0;
+}
+
+/* return the supported asynchronous timing mode. */
+static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
+{
+ if (!chip->onfi_version)
+ return ONFI_TIMING_MODE_UNKNOWN;
+ return le16_to_cpu(chip->onfi_params.async_timing_mode);
+}
+
+/* return the supported synchronous timing mode. */
+static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
+{
+ if (!chip->onfi_version)
+ return ONFI_TIMING_MODE_UNKNOWN;
+ return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
+}
+
+int onfi_init_data_interface(struct nand_chip *chip,
+ struct nand_data_interface *iface,
+ enum nand_data_interface_type type,
+ int timing_mode);
+
+/*
+ * Check if it is a SLC nand.
+ * The !nand_is_slc() can be used to check the MLC/TLC nand chips.
+ * We do not distinguish the MLC and TLC now.
+ */
+static inline bool nand_is_slc(struct nand_chip *chip)
+{
+ return chip->bits_per_cell == 1;
+}
+
+/**
+ * Check if the opcode's address should be sent only on the lower 8 bits
+ * @command: opcode to check
+ */
+static inline int nand_opcode_8bits(unsigned int command)
+{
+ switch (command) {
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ case NAND_CMD_GET_FEATURES:
+ case NAND_CMD_SET_FEATURES:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/* return the supported JEDEC features. */
+static inline int jedec_feature(struct nand_chip *chip)
+{
+ return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
+ : 0;
+}
+
+/* get timing characteristics from ONFI timing mode. */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+/* get data interface from ONFI timing mode 0, used after reset. */
+const struct nand_data_interface *nand_get_default_data_interface(void);
+
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+ void *ecc, int ecclen,
+ void *extraoob, int extraooblen,
+ int threshold);
+
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+/* Default write_oob implementation */
+int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
+
+/* Default write_oob syndrome implementation */
+int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+
+/* Default read_oob implementation */
+int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
+
+/* Default read_oob syndrome implementation */
+int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+
+/* Reset and initialize a NAND device */
+int nand_reset(struct nand_chip *chip, int chipnr);
+
+/* Free resources held by the NAND device */
+void nand_cleanup(struct nand_chip *chip);
+
+/* Default extended ID decoding function */
+void nand_decode_ext_id(struct nand_chip *chip);
+#endif /* __LINUX_MTD_RAWNAND_H */
#include <linux/completion.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/pm_qos.h>
* published by the Free Software Foundation.
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#ifndef __ARCH_ARM_DAVINCI_NAND_H
#define __ARCH_ARM_DAVINCI_NAND_H
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#define NANDFCR_OFFSET 0x60
#define NANDFSR_OFFSET 0x64
#ifndef __MTD_NAND_S3C2410_H
#define __MTD_NAND_S3C2410_H
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
/**
* struct s3c2410_nand_set - define a set of one or more nand chips
projects / mirror_ubuntu-disco-kernel.git / commitdiff