arm64: dts: qcom: db820c: Sort all nodes

Sort all nodes in db820c.dtsi based on address, then name.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index aed34a461b194df07f973da04ce6ef289d619464..99990a139938dcf5e8b506fc1b776eb2405a1f06 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -124,6 +124,18 @@
        };
 };
 
+&blsp1_i2c2 {
+       /* On Low speed expansion */
+       label = "LS-I2C0";
+       status = "okay";
+};
+
+&blsp1_spi0 {
+       /* On Low speed expansion */
+       label = "LS-SPI0";
+       status = "okay";
+};
+
 &blsp1_uart1 {
        label = "BT-UART";
        status = "okay";
@@ -141,6 +153,24 @@
        };
 };
 
+&blsp2_i2c0 {
+       /* On High speed expansion */
+       label = "HS-I2C2";
+       status = "okay";
+};
+
+&blsp2_i2c1 {
+       /* On Low speed expansion */
+       label = "LS-I2C1";
+       status = "okay";
+};
+
+&blsp2_spi5 {
+       /* On High speed expansion */
+       label = "HS-SPI1";
+       status = "okay";
+};
+
 &blsp2_uart1 {
        label = "LS-UART1";
        status = "okay";
@@ -157,75 +187,49 @@
        pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
 };
 
-&blsp1_i2c2 {
-       /* On Low speed expansion */
-       label = "LS-I2C0";
-       status = "okay";
+&camss {
+       vdda-supply = <&pm8994_l2>;
 };
 
-&blsp2_i2c1 {
-       /* On Low speed expansion */
-       label = "LS-I2C1";
+&hdmi {
        status = "okay";
-};
 
-&blsp1_spi0 {
-       /* On Low speed expansion */
-       label = "LS-SPI0";
-       status = "okay";
-};
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+       pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
 
-&blsp2_i2c0 {
-       /* On High speed expansion */
-       label = "HS-I2C2";
-       status = "okay";
+       core-vdda-supply = <&pm8994_l12>;
+       core-vcc-supply = <&pm8994_s4>;
 };
 
-&blsp2_spi5 {
-       /* On High speed expansion */
-       label = "HS-SPI1";
+&hdmi_phy {
        status = "okay";
-};
 
-&camss {
-       vdda-supply = <&pm8994_l2>;
+       vddio-supply = <&pm8994_l12>;
+       vcca-supply = <&pm8994_l28>;
+       #phy-cells = <0>;
 };
 
-&sdhc2 {
-       /* External SD card */
-       pinctrl-names = "default", "sleep";
-       pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-       pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-       cd-gpios = <&msmgpio 38 0x1>;
-       vmmc-supply = <&pm8994_l21>;
-       vqmmc-supply = <&pm8994_l13>;
+&hsusb_phy1 {
        status = "okay";
+
+       vdda-pll-supply = <&pm8994_l12>;
+       vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
-&ufsphy {
+&hsusb_phy2 {
        status = "okay";
 
-       vdda-phy-supply = <&pm8994_l28>;
        vdda-pll-supply = <&pm8994_l12>;
-
-       vdda-phy-max-microamp = <18380>;
-       vdda-pll-max-microamp = <9440>;
-
-       vddp-ref-clk-supply = <&pm8994_l25>;
-       vddp-ref-clk-max-microamp = <100>;
-       vddp-ref-clk-always-on;
+       vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
-&ufshc {
+&mdp {
        status = "okay";
+};
 
-       vcc-supply = <&pm8994_l20>;
-       vccq-supply = <&pm8994_l25>;
-       vccq2-supply = <&pm8994_s4>;
-
-       vcc-max-microamp = <600000>;
-       vccq-max-microamp = <450000>;
-       vccq2-max-microamp = <450000>;
+&mdss {
+       status = "okay";
 };
 
 &msmgpio {
@@ -382,6 +386,32 @@
                "NC"; /* GPIO_149 */
 };
 
+&pcie0 {
+       status = "okay";
+       perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+       vddpe-3v3-supply = <&wlan_en>;
+       vdda-supply = <&pm8994_l28>;
+};
+
+&pcie1 {
+       status = "okay";
+       perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+       vdda-supply = <&pm8994_l28>;
+};
+
+&pcie2 {
+       status = "okay";
+       perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+       vdda-supply = <&pm8994_l28>;
+};
+
+&pcie_phy {
+       status = "okay";
+
+       vdda-phy-supply = <&pm8994_l28>;
+       vdda-pll-supply = <&pm8994_l12>;
+};
+
 &pm8994_gpios {
        gpio-line-names =
                "NC",
@@ -434,114 +464,6 @@
                "NC";
 };
 
-&pcie_phy {
-       status = "okay";
-
-       vdda-phy-supply = <&pm8994_l28>;
-       vdda-pll-supply = <&pm8994_l12>;
-};
-
-&usb3phy {
-       status = "okay";
-
-       vdda-phy-supply = <&pm8994_l28>;
-       vdda-pll-supply = <&pm8994_l12>;
-
-};
-
-&hsusb_phy1 {
-       status = "okay";
-
-       vdda-pll-supply = <&pm8994_l12>;
-       vdda-phy-dpdm-supply = <&pm8994_l24>;
-};
-
-&hsusb_phy2 {
-       status = "okay";
-
-       vdda-pll-supply = <&pm8994_l12>;
-       vdda-phy-dpdm-supply = <&pm8994_l24>;
-};
-
-&usb3 {
-       status = "okay";
-       extcon = <&usb3_id>;
-
-       dwc3@6a00000 {
-               extcon = <&usb3_id>;
-               dr_mode = "otg";
-       };
-};
-
-&usb2 {
-       status = "okay";
-       extcon = <&usb2_id>;
-
-       dwc3@7600000 {
-               extcon = <&usb2_id>;
-               dr_mode = "otg";
-               maximum-speed = "high-speed";
-       };
-};
-
-&pcie0 {
-       status = "okay";
-       perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-       vddpe-3v3-supply = <&wlan_en>;
-       vdda-supply = <&pm8994_l28>;
-};
-
-&pcie1 {
-       status = "okay";
-       perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
-       vdda-supply = <&pm8994_l28>;
-};
-
-&pcie2 {
-       status = "okay";
-       perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
-       vdda-supply = <&pm8994_l28>;
-};
-
-&wcd9335 {
-       clock-names = "mclk", "slimbus";
-       clocks = <&div1_mclk>,
-                <&rpmcc RPM_SMD_BB_CLK1>;
-
-       vdd-buck-supply = <&pm8994_s4>;
-       vdd-buck-sido-supply = <&pm8994_s4>;
-       vdd-tx-supply = <&pm8994_s4>;
-       vdd-rx-supply = <&pm8994_s4>;
-       vdd-io-supply = <&pm8994_s4>;
-};
-
-&mdss {
-       status = "okay";
-};
-
-&mdp {
-       status = "okay";
-};
-
-&hdmi_phy {
-       status = "okay";
-
-       vddio-supply = <&pm8994_l12>;
-       vcca-supply = <&pm8994_l28>;
-       #phy-cells = <0>;
-};
-
-&hdmi {
-       status = "okay";
-
-       pinctrl-names = "default", "sleep";
-       pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-       pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
-       core-vdda-supply = <&pm8994_l12>;
-       core-vcc-supply = <&pm8994_s4>;
-};
-
 &rpm_requests {
        pm8994-regulators {
                compatible = "qcom,rpm-pm8994-regulators";
@@ -698,18 +620,15 @@
        };
 };
 
-&spmi_bus {
-       pmic@0 {
-               pon@800 {
-                       resin {
-                               compatible = "qcom,pm8941-resin";
-                               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-                               debounce = <15625>;
-                               bias-pull-up;
-                               linux,code = <KEY_VOLUMEDOWN>;
-                       };
-               };
-       };
+&sdhc2 {
+       /* External SD card */
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+       pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+       cd-gpios = <&msmgpio 38 0x1>;
+       vmmc-supply = <&pm8994_l21>;
+       vqmmc-supply = <&pm8994_l13>;
+       status = "okay";
 };
 
 &sound {
@@ -783,3 +702,84 @@
                };
        };
 };
+
+&spmi_bus {
+       pmic@0 {
+               pon@800 {
+                       resin {
+                               compatible = "qcom,pm8941-resin";
+                               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               linux,code = <KEY_VOLUMEDOWN>;
+                       };
+               };
+       };
+};
+
+&ufsphy {
+       status = "okay";
+
+       vdda-phy-supply = <&pm8994_l28>;
+       vdda-pll-supply = <&pm8994_l12>;
+
+       vdda-phy-max-microamp = <18380>;
+       vdda-pll-max-microamp = <9440>;
+
+       vddp-ref-clk-supply = <&pm8994_l25>;
+       vddp-ref-clk-max-microamp = <100>;
+       vddp-ref-clk-always-on;
+};
+
+&ufshc {
+       status = "okay";
+
+       vcc-supply = <&pm8994_l20>;
+       vccq-supply = <&pm8994_l25>;
+       vccq2-supply = <&pm8994_s4>;
+
+       vcc-max-microamp = <600000>;
+       vccq-max-microamp = <450000>;
+       vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+       status = "okay";
+       extcon = <&usb2_id>;
+
+       dwc3@7600000 {
+               extcon = <&usb2_id>;
+               dr_mode = "otg";
+               maximum-speed = "high-speed";
+       };
+};
+
+&usb3 {
+       status = "okay";
+       extcon = <&usb3_id>;
+
+       dwc3@6a00000 {
+               extcon = <&usb3_id>;
+               dr_mode = "otg";
+       };
+};
+
+&usb3phy {
+       status = "okay";
+
+       vdda-phy-supply = <&pm8994_l28>;
+       vdda-pll-supply = <&pm8994_l12>;
+
+};
+
+&wcd9335 {
+       clock-names = "mclk", "slimbus";
+       clocks = <&div1_mclk>,
+                <&rpmcc RPM_SMD_BB_CLK1>;
+
+       vdd-buck-supply = <&pm8994_s4>;
+       vdd-buck-sido-supply = <&pm8994_s4>;
+       vdd-tx-supply = <&pm8994_s4>;
+       vdd-rx-supply = <&pm8994_s4>;
+       vdd-io-supply = <&pm8994_s4>;
+};