ARM: mvebu: Enable NAND controller in Armada 370 Mirabox

The Armada 370 Mirabox has a NAND flash, so enable it in the devicetree
and add the partitions as prepared in the factory images.

In order to skip the driver's custom device detection and use only
ONFI detection, the "marvell,keep-config" parameter is used.
This is needed because we have no support for setting the timings parameters yet.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 41457e5ff1a90936b08ef7eeec475e7d6cb3755c..944e8785b30833ea34ace20884c6844a7d3cfe15 100644 (file)
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -139,6 +139,27 @@
                                        reg = <0x25>;
                                };
                        };
+
+                       nand@d0000 {
+                               status = "okay";
+                               num-cs = <1>;
+                               marvell,nand-keep-config;
+                               marvell,nand-enable-arbiter;
+                               nand-on-flash-bbt;
+
+                               partition@0 {
+                                       label = "U-Boot";
+                                       reg = <0 0x400000>;
+                               };
+                               partition@400000 {
+                                       label = "Linux";
+                                       reg = <0x400000 0x400000>;
+                               };
+                               partition@800000 {
+                                       label = "Filesystem";
+                                       reg = <0x800000 0x3f800000>;
+                               };
+                       };
                };
        };
 };