Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with
71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
qt_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dbg("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_dbg(&port->dev, "%s - failed resubmitting read urb, error %d",
+ __func__, result);
else {
- if (tty && RxCount) {
+ if (RxCount) {
tty_flip_buffer_push(tty);
tty_schedule_flip(tty);
}
/* disable SW flow control */
status = BoxDisable_SW_FlowCtrl(port->serial, index);
if (status < 0)
- dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
+ dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (diabling) failed\n");
}
- tty->termios->c_cflag &= ~CMSPAR;
+ termios->c_cflag &= ~CMSPAR;
/* FIXME: Error cases should be returning the actual bits changed only */
}
spin_lock_irqsave(&priv->lock, flags);
if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
- dbg("Using custom termios settings for a baud rate of "
- "4800bps.");
+ dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
/* define custom termios settings for NMEA protocol */
- tty->termios->c_iflag /* input modes - */
+ tty->termios.c_iflag /* input modes - */
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
/* hangup, as defined in acm.c... this might be a bad place for it
* though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ if (tty && !(tty->termios.c_cflag & CLOCAL) &&
!(priv->current_status & UART_CD)) {
- dbg("%s - calling hangup", __func__);
+ dev_dbg(dev, "%s - calling hangup\n", __func__);
tty_hangup(tty);
goto continue_read;
}
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct digi_port *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ struct device *dev = &port->dev;
+ unsigned int iflag = tty->termios.c_iflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_iflag = old_termios->c_iflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned char buf[32];
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_device *dev = port->serial->dev;
+ struct device *ddev = &port->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
- dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios->c_cflag, tty->termios->c_iflag);
+ cflag = tty->termios.c_cflag;
- dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios.c_cflag, tty->termios.c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, old_termios->c_iflag);
-
- dbg("%s - port %d", __func__, port->number);
++ dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag);
+ dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag);
if (edge_port == NULL)
return;
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- *tty->termios = *old_termios;
+ tty->termios = *old_termios;
- dev_err(&edge_port->port->dev, "%s - out of memory\n",
- __func__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return;
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
- dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __func__, config->cXon, config->cXoff);
+ dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+ __func__, config->cXon, config->cXoff);
} else
- dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
+ dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
/* Round the baud rate */
baud = tty_get_baud_rate(tty);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
- dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios.c_cflag, tty->termios.c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, old_termios->c_iflag);
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
++ tty->termios.c_cflag, tty->termios.c_iflag);
+ dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
+ old_termios->c_cflag, old_termios->c_iflag);
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
if (edge_port == NULL)
return;
u32 newval = cflag & supported_mask;
/* Just use the ospeed. ispeed should be the same. */
- baud = tty->termios->c_ospeed;
+ baud = tty->termios.c_ospeed;
- dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
+ dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud);
/* compute the parity parameter */
parity = 0;
struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
+ struct device *dev = &port->dev;
+ unsigned int iflag = tty->termios.c_iflag;
unsigned int old_iflag = old_termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
struct klsi_105_port_settings *cfg;
unsigned long flags;
return;
}
- dbg("%s\n", "setting termios - ASPIRE");
+ dev_dbg(&port->dev, "setting termios - ASPIRE\n");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
- dbg("%s - cflag %08x iflag %08x", __func__,
- tty->termios.c_cflag,
- RELEVANT_IFLAG(tty->termios.c_iflag));
+ dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
++ tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
- dbg("%s - old cflag %08x old iflag %08x", __func__,
- old_termios->c_cflag,
- RELEVANT_IFLAG(old_termios->c_iflag));
-
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__,
+ old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
/* change the port settings to the new ones specified */
change_port_settings(tty, mos7720_port, old_termios);
return;
}
- dbg("%s", "setting termios - ");
+ dev_dbg(&port->dev, "%s", "setting termios - \n");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
- dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
++ tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
+ dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
+ old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
+ dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* change the port settings to the new ones specified */
__le16 divisor;
int br;
- if (!tty) {
- dbg("%s(): no tty structures", __func__);
+ if (!tty)
return;
- }
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
spin_lock_irqsave(&priv->lock, flags);
divisor = priv->pending_setup.divisor;
/* set to 9600 */
result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
if (result < 0)
- dbg("%s - set uart failed", __func__);
+ dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
if (tty)
- ssu100_set_termios(tty, port, tty->termios);
+ ssu100_set_termios(tty, port, &tty->termios);
return usb_serial_generic_open(tty, port);
}
}
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
- dbg("%s - sending TI_OPEN_PORT", __func__);
+ dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
usb_clear_halt(dev, port->read_urb->pipe);
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
- dbg("%s - sending TI_OPEN_PORT (2)", __func__);
+ dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
int port_number = port->number - port->serial->minor;
unsigned int mcr;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
- dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
- dbg("%s - old clfag %08x, old iflag %08x", __func__,
- old_termios->c_cflag, old_termios->c_iflag);
+ dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag);
+ dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__,
+ old_termios->c_cflag, old_termios->c_iflag);
if (tport == NULL)
return;
static void firm_setup_port(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
+ struct device *dev = &port->dev;
struct whiteheat_port_settings port_settings;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
port_settings.port = port->number + 1;
projects / mirror_ubuntu-eoan-kernel.git / commitdiff