]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
net: dsa: qca8k: extend slave-bus implementations
authorChristian Lamparter <chunkeey@gmail.com>
Fri, 22 Mar 2019 00:05:03 +0000 (01:05 +0100)
committerDavid S. Miller <davem@davemloft.net>
Tue, 26 Mar 2019 17:47:10 +0000 (10:47 -0700)
This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/qca8k.c
drivers/net/dsa/qca8k.h

index 14ad78225f07805223d793247c839113ef446adc..c4fa400efdcc82643dcd4d2c762ed8079305adf7 100644 (file)
@@ -481,6 +481,155 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
                qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
 }
 
+static u32
+qca8k_port_to_phy(int port)
+{
+       /* From Andrew Lunn:
+        * Port 0 has no internal phy.
+        * Port 1 has an internal PHY at MDIO address 0.
+        * Port 2 has an internal PHY at MDIO address 1.
+        * ...
+        * Port 5 has an internal PHY at MDIO address 4.
+        * Port 6 has no internal PHY.
+        */
+
+       return port - 1;
+}
+
+static int
+qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
+{
+       u32 phy, val;
+
+       if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+               return -EINVAL;
+
+       /* callee is responsible for not passing bad ports,
+        * but we still would like to make spills impossible.
+        */
+       phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+       val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+             QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+             QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+             QCA8K_MDIO_MASTER_DATA(data);
+
+       qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+       return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+               QCA8K_MDIO_MASTER_BUSY);
+}
+
+static int
+qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
+{
+       u32 phy, val;
+
+       if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+               return -EINVAL;
+
+       /* callee is responsible for not passing bad ports,
+        * but we still would like to make spills impossible.
+        */
+       phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+       val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+             QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+             QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+       qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+       if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+                           QCA8K_MDIO_MASTER_BUSY))
+               return -ETIMEDOUT;
+
+       val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
+               QCA8K_MDIO_MASTER_DATA_MASK);
+
+       return val;
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+{
+       struct qca8k_priv *priv = ds->priv;
+
+       return qca8k_mdio_write(priv, port, regnum, data);
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+       struct qca8k_priv *priv = ds->priv;
+       int ret;
+
+       ret = qca8k_mdio_read(priv, port, regnum);
+
+       if (ret < 0)
+               return 0xffff;
+
+       return ret;
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+       u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+       struct device_node *ports, *port;
+       int err;
+
+       ports = of_get_child_by_name(priv->dev->of_node, "ports");
+       if (!ports)
+               return -EINVAL;
+
+       for_each_available_child_of_node(ports, port) {
+               err = of_property_read_u32(port, "reg", &reg);
+               if (err)
+                       return err;
+
+               if (!dsa_is_user_port(priv->ds, reg))
+                       continue;
+
+               if (of_property_read_bool(port, "phy-handle"))
+                       external_mdio_mask |= BIT(reg);
+               else
+                       internal_mdio_mask |= BIT(reg);
+       }
+
+       if (!external_mdio_mask && !internal_mdio_mask) {
+               dev_err(priv->dev, "no PHYs are defined.\n");
+               return -EINVAL;
+       }
+
+       /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+        * the MDIO_MASTER register also _disconnects_ the external MDC
+        * passthrough to the internal PHYs. It's not possible to use both
+        * configurations at the same time!
+        *
+        * Because this came up during the review process:
+        * If the external mdio-bus driver is capable magically disabling
+        * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+        * accessors for the time being, it would be possible to pull this
+        * off.
+        */
+       if (!!external_mdio_mask && !!internal_mdio_mask) {
+               dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+               return -EINVAL;
+       }
+
+       if (external_mdio_mask) {
+               /* Make sure to disable the internal mdio bus in cases
+                * a dt-overlay and driver reload changed the configuration
+                */
+
+               qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+                               QCA8K_MDIO_MASTER_EN);
+               return 0;
+       }
+
+       priv->ops.phy_read = qca8k_phy_read;
+       priv->ops.phy_write = qca8k_phy_write;
+       return 0;
+}
+
 static int
 qca8k_setup(struct dsa_switch *ds)
 {
@@ -502,6 +651,10 @@ qca8k_setup(struct dsa_switch *ds)
        if (IS_ERR(priv->regmap))
                pr_warn("regmap initialization failed");
 
+       ret = qca8k_setup_mdio_bus(priv);
+       if (ret)
+               return ret;
+
        /* Initialize CPU port pad mode (xMII type, delays...) */
        phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
        if (phy_mode < 0) {
@@ -905,7 +1058,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
                return -ENOMEM;
 
        priv->ds->priv = priv;
-       priv->ds->ops = &qca8k_switch_ops;
+       priv->ops = qca8k_switch_ops;
+       priv->ds->ops = &priv->ops;
        mutex_init(&priv->reg_mutex);
        dev_set_drvdata(&mdiodev->dev, priv);
 
index d146e54c8a6c615045ff18b31b413fba08365221..249fd62268e5450ff41fa33ef7d7ba055d35461c 100644 (file)
 #define   QCA8K_MIB_FLUSH                              BIT(24)
 #define   QCA8K_MIB_CPU_KEEP                           BIT(20)
 #define   QCA8K_MIB_BUSY                               BIT(17)
+#define QCA8K_MDIO_MASTER_CTRL                         0x3c
+#define   QCA8K_MDIO_MASTER_BUSY                       BIT(31)
+#define   QCA8K_MDIO_MASTER_EN                         BIT(30)
+#define   QCA8K_MDIO_MASTER_READ                       BIT(27)
+#define   QCA8K_MDIO_MASTER_WRITE                      0
+#define   QCA8K_MDIO_MASTER_SUP_PRE                    BIT(26)
+#define   QCA8K_MDIO_MASTER_PHY_ADDR(x)                        ((x) << 21)
+#define   QCA8K_MDIO_MASTER_REG_ADDR(x)                        ((x) << 16)
+#define   QCA8K_MDIO_MASTER_DATA(x)                    (x)
+#define   QCA8K_MDIO_MASTER_DATA_MASK                  GENMASK(15, 0)
+#define   QCA8K_MDIO_MASTER_MAX_PORTS                  5
+#define   QCA8K_MDIO_MASTER_MAX_REG                    32
 #define QCA8K_GOL_MAC_ADDR0                            0x60
 #define QCA8K_GOL_MAC_ADDR1                            0x64
 #define QCA8K_REG_PORT_STATUS(_i)                      (0x07c + (_i) * 4)
@@ -169,6 +181,7 @@ struct qca8k_priv {
        struct dsa_switch *ds;
        struct mutex reg_mutex;
        struct device *dev;
+       struct dsa_switch_ops ops;
 };
 
 struct qca8k_mib_desc {