---help---
Support for the ELECOM BM084 (bluetooth mouse).
+config HID_ELO
+ tristate "ELO USB 4000/4500 touchscreen"
+ depends on USB_HID
+ ---help---
+ Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+ different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard" if EXPERT
depends on HID
Support for Holtek based devices:
- Holtek On Line Grip based game controller
- Trust GXT 18 Gaming Keyboard
+ - Sharkoon Drakonia / Perixx MX-2000 gaming mice
+ - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
+ Zalman ZM-GM1
config HOLTEK_FF
bool "Holtek On Line Grip force feedback support"
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
+obj-$(CONFIG_HID_ELO) += hid-elo.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
+obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
obj-$(CONFIG_HID_HYPERV_MOUSE) += hid-hyperv.o
obj-$(CONFIG_HID_ICADE) += hid-icade.o
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
{ HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
--- /dev/null
+/*
+ * HID driver for ELO usb touchscreen 4000/4500
+ *
+ * Copyright (c) 2013 Jiri Slaby
+ *
+ * Data parsing taken from elousb driver by Vojtech Pavlik.
+ *
+ * This driver is licensed under the terms of GPLv2.
+ */
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include "hid-ids.h"
+
+#define ELO_PERIODIC_READ_INTERVAL HZ
+#define ELO_SMARTSET_CMD_TIMEOUT 2000 /* msec */
+
+/* Elo SmartSet commands */
+#define ELO_FLUSH_SMARTSET_RESPONSES 0x02 /* Flush all pending smartset responses */
+#define ELO_SEND_SMARTSET_COMMAND 0x05 /* Send a smartset command */
+#define ELO_GET_SMARTSET_RESPONSE 0x06 /* Get a smartset response */
+#define ELO_DIAG 0x64 /* Diagnostics command */
+#define ELO_SMARTSET_PACKET_SIZE 8
+
+struct elo_priv {
+ struct usb_device *usbdev;
+ struct delayed_work work;
+ unsigned char buffer[ELO_SMARTSET_PACKET_SIZE];
+};
+
+static struct workqueue_struct *wq;
+static bool use_fw_quirk = true;
+module_param(use_fw_quirk, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)");
+
+static void elo_input_configured(struct hid_device *hdev,
+ struct hid_input *hidinput)
+{
+ struct input_dev *input = hidinput->input;
+
+ set_bit(BTN_TOUCH, input->keybit);
+ set_bit(ABS_PRESSURE, input->absbit);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
+}
+
+static void elo_process_data(struct input_dev *input, const u8 *data, int size)
+{
+ int press;
+
+ input_report_abs(input, ABS_X, (data[3] << 8) | data[2]);
+ input_report_abs(input, ABS_Y, (data[5] << 8) | data[4]);
+
+ press = 0;
+ if (data[1] & 0x80)
+ press = (data[7] << 8) | data[6];
+ input_report_abs(input, ABS_PRESSURE, press);
+
+ if (data[1] & 0x03) {
+ input_report_key(input, BTN_TOUCH, 1);
+ input_sync(input);
+ }
+
+ if (data[1] & 0x04)
+ input_report_key(input, BTN_TOUCH, 0);
+
+ input_sync(input);
+}
+
+static int elo_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct hid_input *hidinput;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || list_empty(&hdev->inputs))
+ return 0;
+
+ hidinput = list_first_entry(&hdev->inputs, struct hid_input, list);
+
+ switch (report->id) {
+ case 0:
+ if (data[0] == 'T') { /* Mandatory ELO packet marker */
+ elo_process_data(hidinput->input, data, size);
+ return 1;
+ }
+ break;
+ default: /* unknown report */
+ /* Unknown report type; pass upstream */
+ hid_info(hdev, "unknown report type %d\n", report->id);
+ break;
+ }
+
+ return 0;
+}
+
+static int elo_smartset_send_get(struct usb_device *dev, u8 command,
+ void *data)
+{
+ unsigned int pipe;
+ u8 dir;
+
+ if (command == ELO_SEND_SMARTSET_COMMAND) {
+ pipe = usb_sndctrlpipe(dev, 0);
+ dir = USB_DIR_OUT;
+ } else if (command == ELO_GET_SMARTSET_RESPONSE) {
+ pipe = usb_rcvctrlpipe(dev, 0);
+ dir = USB_DIR_IN;
+ } else
+ return -EINVAL;
+
+ return usb_control_msg(dev, pipe, command,
+ dir | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, data, ELO_SMARTSET_PACKET_SIZE,
+ ELO_SMARTSET_CMD_TIMEOUT);
+}
+
+static int elo_flush_smartset_responses(struct usb_device *dev)
+{
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ ELO_FLUSH_SMARTSET_RESPONSES,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static void elo_work(struct work_struct *work)
+{
+ struct elo_priv *priv = container_of(work, struct elo_priv, work.work);
+ struct usb_device *dev = priv->usbdev;
+ unsigned char *buffer = priv->buffer;
+ int ret;
+
+ ret = elo_flush_smartset_responses(dev);
+ if (ret < 0) {
+ dev_err(&dev->dev, "initial FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* send Diagnostics command */
+ *buffer = ELO_DIAG;
+ ret = elo_smartset_send_get(dev, ELO_SEND_SMARTSET_COMMAND, buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "send Diagnostics Command failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* get the result */
+ ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "get Diagnostics Command response failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* read the ack */
+ if (*buffer != 'A') {
+ ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE,
+ buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "get acknowledge response failed, error %d\n",
+ ret);
+ goto fail;
+ }
+ }
+
+fail:
+ ret = elo_flush_smartset_responses(dev);
+ if (ret < 0)
+ dev_err(&dev->dev, "final FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+ ret);
+ queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+}
+
+/*
+ * Not all Elo devices need the periodic HID descriptor reads.
+ * Only firmware version M needs this.
+ */
+static bool elo_broken_firmware(struct usb_device *dev)
+{
+ return use_fw_quirk && le16_to_cpu(dev->descriptor.bcdDevice) == 0x10d;
+}
+
+static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct elo_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work, elo_work);
+ priv->usbdev = interface_to_usbdev(to_usb_interface(hdev->dev.parent));
+
+ hid_set_drvdata(hdev, priv);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto err_free;
+ }
+
+ if (elo_broken_firmware(priv->usbdev)) {
+ hid_info(hdev, "broken firmware found, installing workaround\n");
+ queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+ }
+
+ return 0;
+err_free:
+ kfree(priv);
+ return ret;
+}
+
+static void elo_remove(struct hid_device *hdev)
+{
+ struct elo_priv *priv = hid_get_drvdata(hdev);
+
+ hid_hw_stop(hdev);
+ flush_workqueue(wq);
+ kfree(priv);
+}
+
+static const struct hid_device_id elo_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009), },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030), },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, elo_devices);
+
+static struct hid_driver elo_driver = {
+ .name = "elo",
+ .id_table = elo_devices,
+ .probe = elo_probe,
+ .remove = elo_remove,
+ .raw_event = elo_raw_event,
+ .input_configured = elo_input_configured,
+};
+
+static int __init elo_driver_init(void)
+{
+ int ret;
+
+ wq = create_singlethread_workqueue("elousb");
+ if (!wq)
+ return -ENOMEM;
+
+ ret = hid_register_driver(&elo_driver);
+ if (ret)
+ destroy_workqueue(wq);
+
+ return ret;
+}
+module_init(elo_driver_init);
+
+static void __exit elo_driver_exit(void)
+{
+ hid_unregister_driver(&elo_driver);
+ destroy_workqueue(wq);
+}
+module_exit(elo_driver_exit);
+
+MODULE_AUTHOR("Jiri Slaby <jslaby@suse.cz>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * HID driver for Holtek gaming mice
+ * Copyright (c) 2013 Christian Ohm
+ * Heavily inspired by various other HID drivers that adjust the report
+ * descriptor.
+*/
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+/*
+ * The report descriptor of some Holtek based gaming mice specifies an
+ * excessively large number of consumer usages (2^15), which is more than
+ * HID_MAX_USAGES. This prevents proper parsing of the report descriptor.
+ *
+ * This driver fixes the report descriptor for:
+ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000
+ * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200
+ * and Zalman ZM-GM1
+ */
+
+static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
+ /* Change usage maximum and logical maximum from 0x7fff to
+ * 0x2fff, so they don't exceed HID_MAX_USAGES */
+ switch (hdev->product) {
+ case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067:
+ if (*rsize >= 122 && rdesc[115] == 0xff && rdesc[116] == 0x7f
+ && rdesc[120] == 0xff && rdesc[121] == 0x7f) {
+ hid_info(hdev, "Fixing up report descriptor\n");
+ rdesc[116] = rdesc[121] = 0x2f;
+ }
+ break;
+ case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A:
+ if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f
+ && rdesc[111] == 0xff && rdesc[112] == 0x7f) {
+ hid_info(hdev, "Fixing up report descriptor\n");
+ rdesc[107] = rdesc[112] = 0x2f;
+ }
+ break;
+ }
+
+ }
+ return rdesc;
+}
+
+static const struct hid_device_id holtek_mouse_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+ USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+ USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, holtek_mouse_devices);
+
+static struct hid_driver holtek_mouse_driver = {
+ .name = "holtek_mouse",
+ .id_table = holtek_mouse_devices,
+ .report_fixup = holtek_mouse_report_fixup,
+};
+
+module_hid_driver(holtek_mouse_driver);
+MODULE_LICENSE("GPL");
#define USB_VENDOR_ID_HOLTEK_ALT 0x04d9
#define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a
#define USB_VENDOR_ID_IMATION 0x0718
#define USB_DEVICE_ID_DISC_STAKKA 0xd000
dev->battery_report_type);
if (ret != 2) {
- if (ret >= 0)
- ret = -EINVAL;
+ ret = -ENODATA;
break;
}
+ ret = 0;
if (dev->battery_min < dev->battery_max &&
buf[1] >= dev->battery_min &&
input_unregister_device(session->input);
}
+/*
+ * Asynchronous device registration
+ * HID device drivers might want to perform I/O during initialization to
+ * detect device types. Therefore, call device registration in a separate
+ * worker so the HIDP thread can schedule I/O operations.
+ * Note that this must be called after the worker thread was initialized
+ * successfully. This will then add the devices and increase session state
+ * on success, otherwise it will terminate the session thread.
+ */
+static void hidp_session_dev_work(struct work_struct *work)
+{
+ struct hidp_session *session = container_of(work,
+ struct hidp_session,
+ dev_init);
+ int ret;
+
+ ret = hidp_session_dev_add(session);
+ if (!ret)
+ atomic_inc(&session->state);
+ else
+ hidp_session_terminate(session);
+}
+
/*
* Create new session object
* Allocate session object, initialize static fields, copy input data into the
session->idle_to = req->idle_to;
/* device management */
+ INIT_WORK(&session->dev_init, hidp_session_dev_work);
setup_timer(&session->timer, hidp_idle_timeout,
(unsigned long)session);
* Probe HIDP session
* This is called from the l2cap_conn core when our l2cap_user object is bound
* to the hci-connection. We get the session via the \user object and can now
- * start the session thread, register the HID/input devices and link it into
- * the global session list.
+ * start the session thread, link it into the global session list and
+ * schedule HID/input device registration.
* The global session-list owns its own reference to the session object so you
* can drop your own reference after registering the l2cap_user object.
*/
goto out_unlock;
}
+ if (session->input) {
+ ret = hidp_session_dev_add(session);
+ if (ret)
+ goto out_unlock;
+ }
+
ret = hidp_session_start_sync(session);
if (ret)
- goto out_unlock;
+ goto out_del;
- ret = hidp_session_dev_add(session);
- if (ret)
- goto out_stop;
+ /* HID device registration is async to allow I/O during probe */
+ if (session->input)
+ atomic_inc(&session->state);
+ else
+ schedule_work(&session->dev_init);
hidp_session_get(session);
list_add(&session->list, &hidp_session_list);
ret = 0;
goto out_unlock;
-out_stop:
- hidp_session_terminate(session);
+out_del:
+ if (session->input)
+ hidp_session_dev_del(session);
out_unlock:
up_write(&hidp_session_sem);
return ret;
down_write(&hidp_session_sem);
hidp_session_terminate(session);
- hidp_session_dev_del(session);
+
+ cancel_work_sync(&session->dev_init);
+ if (session->input ||
+ atomic_read(&session->state) > HIDP_SESSION_PREPARING)
+ hidp_session_dev_del(session);
+
list_del(&session->list);
up_write(&hidp_session_sem);
enum hidp_session_state {
HIDP_SESSION_IDLING,
+ HIDP_SESSION_PREPARING,
HIDP_SESSION_RUNNING,
};
unsigned long idle_to;
/* device management */
+ struct work_struct dev_init;
struct input_dev *input;
struct hid_device *hid;
struct timer_list timer;
projects / mirror_ubuntu-artful-kernel.git / commitdiff