net: dsa: LAN9303: add MDIO managed mode support

When the LAN9303 device is in MDIO manged mode, all register accesses must
be done via MDIO.

Please note: this code is compile time tested only due to the absence of such
configured hardware. It is based on a patch from Stefan Roese from 2014.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
CC: devicetree@vger.kernel.org
CC: robh+dt@kernel.org
CC: mark.rutland@arm.com
CC: sr@denx.de
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 2edc2561467a73df29f2ae936ea8b9175215e9a1..04f2965a446768920ae90f846419d438773a633d 100644 (file)
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -3,7 +3,10 @@ SMSC/MicroChip LAN9303 three port ethernet switch
 
 Required properties:
 
-- compatible: should be "smsc,lan9303-i2c"
+- compatible: should be
+  - "smsc,lan9303-i2c" for I2C managed mode
+    or
+  - "smsc,lan9303-mdio" for mdio managed mode
 
 Optional properties:
 
@@ -60,3 +63,43 @@ I2C managed mode:
                        };
                };
        };
+
+MDIO managed mode:
+
+       master: masterdevice@X {
+               status = "okay";
+               phy-handle = <&switch>;
+
+               mdio {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       switch: switch-phy@0 {
+                               compatible = "smsc,lan9303-mdio";
+                               reg = <0>;
+                               reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+                               reset-duration = <100>;
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+                                               label = "cpu";
+                                               ethernet = <&master>;
+                                       };
+
+                                       port@1 { /* external port 1 */
+                                               reg = <1>;
+                                               label = "lan1;
+                                       };
+
+                                       port@2 { /* external port 2 */
+                                               reg = <2>;
+                                               label = "lan2";
+                                       };
+                               };
+                       };
+               };
+       };

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index c56533bffc8ce5d48c8a493a90fe70820e50c7ac..131a5b1cbfc83fc31fad7b8ba90d557af18fa46b 100644 (file)
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -66,4 +66,12 @@ config NET_DSA_SMSC_LAN9303_I2C
          Enable access functions if the SMSC/Microchip LAN9303 is configured
          for I2C managed mode.
 
+config NET_DSA_SMSC_LAN9303_MDIO
+       tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
+       depends on NET_DSA
+       select NET_DSA_SMSC_LAN9303
+       ---help---
+         Enable access functions if the SMSC/Microchip LAN9303 is configured
+         for MDIO managed mode.
+
 endmenu

diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index c1981ba18963f9ee602d6bbefd6ace5328025040..edd63036173650912ba5e6a058c98d9f31e43393 100644 (file)
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_QCA8K)     += qca8k.o
 obj-$(CONFIG_NET_DSA_MT7530)   += mt7530.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
+obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
 obj-y                          += b53/
 obj-y                          += mv88e6xxx/
 obj-$(CONFIG_NET_DSA_LOOP)     += dsa_loop.o dsa_loop_bdinfo.o

diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c
new file mode 100644 (file)
index 0000000..93c36c0
--- /dev/null
+++ b/drivers/net/dsa/lan9303_mdio.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2017 Pengutronix, Juergen Borleis <kernel@pengutronix.de>
+ *
+ * Partially based on a patch from
+ * Copyright (c) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+#include "lan9303.h"
+
+/* Generate phy-addr and -reg from the input address */
+#define PHY_ADDR(x) ((((x) >> 6) + 0x10) & 0x1f)
+#define PHY_REG(x) (((x) >> 1) & 0x1f)
+
+struct lan9303_mdio {
+       struct mdio_device *device;
+       struct lan9303 chip;
+};
+
+static void lan9303_mdio_real_write(struct mdio_device *mdio, int reg, u16 val)
+{
+       mdio->bus->write(mdio->bus, PHY_ADDR(reg), PHY_REG(reg), val);
+}
+
+static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val)
+{
+       struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+
+       mutex_lock(&sw_dev->device->bus->mdio_lock);
+       lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff);
+       lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff);
+       mutex_unlock(&sw_dev->device->bus->mdio_lock);
+
+       return 0;
+}
+
+static u16 lan9303_mdio_real_read(struct mdio_device *mdio, int reg)
+{
+       return mdio->bus->read(mdio->bus, PHY_ADDR(reg), PHY_REG(reg));
+}
+
+static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+       struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+
+       mutex_lock(&sw_dev->device->bus->mdio_lock);
+       *val = lan9303_mdio_real_read(sw_dev->device, reg);
+       *val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16);
+       mutex_unlock(&sw_dev->device->bus->mdio_lock);
+
+       return 0;
+}
+
+static const struct regmap_config lan9303_mdio_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 32,
+       .reg_stride = 1,
+       .can_multi_write = true,
+       .max_register = 0x0ff, /* address bits 0..1 are not used */
+       .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+
+       .volatile_table = &lan9303_register_set,
+       .wr_table = &lan9303_register_set,
+       .rd_table = &lan9303_register_set,
+
+       .reg_read = lan9303_mdio_read,
+       .reg_write = lan9303_mdio_write,
+
+       .cache_type = REGCACHE_NONE,
+};
+
+static int lan9303_mdio_probe(struct mdio_device *mdiodev)
+{
+       struct lan9303_mdio *sw_dev;
+       int ret;
+
+       sw_dev = devm_kzalloc(&mdiodev->dev, sizeof(struct lan9303_mdio),
+                             GFP_KERNEL);
+       if (!sw_dev)
+               return -ENOMEM;
+
+       sw_dev->chip.regmap = devm_regmap_init(&mdiodev->dev, NULL, sw_dev,
+                                               &lan9303_mdio_regmap_config);
+       if (IS_ERR(sw_dev->chip.regmap)) {
+               ret = PTR_ERR(sw_dev->chip.regmap);
+               dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret);
+               return ret;
+       }
+
+       /* link forward and backward */
+       sw_dev->device = mdiodev;
+       dev_set_drvdata(&mdiodev->dev, sw_dev);
+       sw_dev->chip.dev = &mdiodev->dev;
+
+       ret = lan9303_probe(&sw_dev->chip, mdiodev->dev.of_node);
+       if (ret != 0)
+               return ret;
+
+       dev_info(&mdiodev->dev, "LAN9303 MDIO driver loaded successfully\n");
+
+       return 0;
+}
+
+static void lan9303_mdio_remove(struct mdio_device *mdiodev)
+{
+       struct lan9303_mdio *sw_dev = dev_get_drvdata(&mdiodev->dev);
+
+       if (!sw_dev)
+               return;
+
+       lan9303_remove(&sw_dev->chip);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct of_device_id lan9303_mdio_of_match[] = {
+       { .compatible = "smsc,lan9303-mdio" },
+       { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lan9303_mdio_of_match);
+
+static struct mdio_driver lan9303_mdio_driver = {
+       .mdiodrv.driver = {
+               .name = "LAN9303_MDIO",
+               .of_match_table = of_match_ptr(lan9303_mdio_of_match),
+       },
+       .probe  = lan9303_mdio_probe,
+       .remove = lan9303_mdio_remove,
+};
+mdio_module_driver(lan9303_mdio_driver);
+
+MODULE_AUTHOR("Stefan Roese <sr@denx.de>, Juergen Borleis <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Driver for SMSC/Microchip LAN9303 three port ethernet switch in MDIO managed mode");
+MODULE_LICENSE("GPL v2");